Skip to main content
  • Service

Industrial Control Panels and the Panel Shop Program

By maintaining close relationships with authorities having jurisdiction (AHJs), our program offers unique flexibility for panel manufacturers, enabling you to label either mass-produced or custom-built ICPs without needing our examination of each design.

The inside of an industrial control panel board.

Overview

Industrial control panels (ICPs) are defined by the National Electrical Code (NEC) Section 409.2 as an assembly of two or more power circuit components, control circuit components, or any combination of power and control circuit components. These components are typically switches, terminal blocks, contactors, motor drives, transformers, overcurrent protective devices and the like.

Similar to other industrial equipment, ICPs can be evaluated as open type or enclosed. Open-type equipment is ultimately installed in an enclosure before being put into service. Enclosed ICPs can be rated for indoor use or any type rating, such as 3R, 4, or 12. In addition, these can be certified for use in classified areas, e.g., hazardous locations.

Services

As a global leader in certifying ICPs, we maintain close relationships with authorities having jurisdiction (AHJs). This partnership allows manufacturers to label either mass-produced or custom-built ICPs without needing our examination of each design. Often called the Panel Shop Program, it offers unique flexibility for panel manufacturers. The program covers certification for U.S. and Canadian markets. Also unique to this program is the required training for panel shops that want to be a part of the program.

Industrial Control Panel (ICP) Shop Program

Our Industrial Control Panel (ICP) Shop Program allows manufacturers who custom build or mass-produce ICPs to apply the UL Marks for the U.S. and Canada at their factories. Our program makes it convenient to receive a UL certification while allowing maximum flexibility in panel design. When regulators, specifiers and end-product certifiers see the familiar UL Mark, they can be confident that the panel has met the certification requirements.

Why UL

  • Increase your competitive advantage — Offer your customers UL certified general use, industrial machinery, elevator control, service equipment, air conditioning and refrigeration equipment, fountain control, irrigation equipment, crane and flame control, and marine use panels and bid on jobs that specify UL certified ICPs.
  • Cover all requirements — Our Panel Shop Program covers proper component usage, enclosure environmental ratings, wiring and motor protection, safety markings, and conformance to the National Electrical Code (NEC) and Canadian Electrical Code (CEC).
  • Greater efficiency — help to minimize red-tagged panels at the job site, along with the resulting delays and extra cost.
  • Widespread acceptance — Benefit from the widespread acceptance of the UL Mark by regulatory authorities in every jurisdiction in the U.S. and Canada.
  • Increased component sourcing — UL and CSA International have a formal component acceptance agreement that permits acceptance of specific components for use in end products, including ICPs. This agreement gives our customers even more flexibility when sourcing components because covered CSA certified components can now be used in UL certified panels in addition to UL certified components already permitted under the scope of the ICP program.
  • Training and consulting — We share our expertise through technical training, workshops and advisory services focused on the needs of ICP builders. Attend one of our custom panel builder workshops and hear from the technical experts who can help you “build safety in” while meeting the requirements set for you by regulators and your customers.
control panel

UL 508A Supplement SA Specific Component Requirements

Review the requirements

Workshop: Industrial Control Panels UL 508A and Short-Circuit Current Ratings

Workshop: UL 698A 3rd Edition, Industrial Control Panels Relating to Hazardous (Classified) Locations

Workshop: Industrial Control Panels UL 508A & Short Circuit Current Ratings

Subscribe to the Energy and Industrial Outlook newsletter

Tap into our expertise to help you navigate market risk and complexity.
Get in touch

Let us know how we can help.

Help and support

How can we help?