Skip to main content
  • Service

Environmental Simulation Testing

Validate the durability of your product components.

Engineer inspecting components in lab

Experts helping you meet product requirements

At UL Solutions, we work with manufacturers, original equipment manufacturers (OEMs) and their suppliers to bring safer, smarter products to market. We offer a comprehensive set of services throughout the entire development cycle, providing you with single destination testing and advisory services. Our expertise and key relationships offer a level of quality and confidence that your components will be validated against market specifications. We work closely with key international regulatory agencies, code authorities and manufacturers on the development of consensus-based standards and services that apply to emerging technologies within your industry.

Environmental testing services

Your products and their components can spend a majority of their existence outdoors, so making sure your products perform under varying conditions is important. Our environmental testing brings a variety of real-world simulations and accelerated testing together to help you validate resistance, durability, safety and performance. Our environmental simulation testing services include:

  • Temperature
  • Humidity
  • Altitude
  • Vibration
  • Thermal shock
  • Water ingress protection (IP)
  • Dust
  • Salt fog
  • Ozone
  • Ultraviolet (UV)
  • Combined environments (thermal with vibration)

Requirements and standards 

  • LV124
  • EC 60529
  • SO 20653
  • JIS D 0203
  • IEC 60068 Series
  • Automotive Manufacturer Standards

Temperature: thermal testing

Our array of thermal testing equipment can produce a range of temperatures from negative 70 degrees Celsius to 180 degrees Celsius. They can also incorporate noncondensing relative humidity from 10% to 95% and offer a ramp rate up to 15c per minute.

Standards

  • IEC 60068-2-1
  • IEC 60068-2-2
  • IEC 60068-2-30
  • IEC 60068-2-38
  • IEC 60068-2-67
  • IEC 60068-2-68

Thermal shock testing

Our thermal shock testing exposes and evaluates components’ resistance to sudden changes in temperature within short time periods. Hot chambers range from 50 degrees Celsius to 210 degrees Celsius, while cold chambers range from negative 75 degrees Celsius to negative 190 degrees Celsius.

Standards

  • GMW 3172
  • SAE J1455
  • IEC 60068-2-14
  • LV 124-2
  • ISO 16750-4

Altitude testing

Our standard and large capacity altitude testing ranges from sea level to 70,000 feet at temperatures that range from negative 73 degrees Celsius to 177 degrees Celsius with ramp rates from 2.5c to 5c per minute.

Standards

  • IEC 60068-2-13
  • IEC 60068-2-40 (-15c at 50,000 feet)
  • IEC 60068-2-41 (+85c at 45,000 feet)

Ingress protection (IP) water and dust testing

Our IP water and dust testing evaluates liquid ingress and solid particle protection. Tests include various substances such as hands, steel balls, steel wires, dust, water and more.

Standards and IP test ratings

  • IEC/EN 60529
  • Water IP
  • IPx1, IPx2, IPx3, IPx4,
  • IPx5, IPx6, IPx7, IPx8
  • Dust IP (Talcum powder only)
  • IP5x, IP6x

Ozone testing

Our ozone chamber testing simulates ranges from 0-250 PPHM/VOL and 0-1,000 PPHM/VOL2 at zero to six cubic feet per minute air flow.

Test methods

  • ASTM D1149
  • ASTM D1171
  • ASTM D1149
  • ASTM D3395
  • ASTM D4575 (Method A Only)
  • ISO 1431—1: 1989
  • ISO 1431—2: 1994
  • ISO 1431—3: 2000

Please contact us for more information about UL Solutions’ complete environmental testing services and offerings.

Related resources
Environmental

Environmental durability testing capabilities

3.43 MB
seismic

seismic testing for products used in medical and health facilities

480.44 KB
Seismic

Seismic and vibration testing for all products

826.52 KB
X

Get connected with our sales team

Thanks for your interest in our products and services. Let's collect some information so we can connect you with the right person.

Please wait…