Keep up with what’s happening in the regulatory world
We update monthly to keep you well-informed, in touch and ahead of the game by sharing the latest regulatory news and safety updates from around the world, featuring different regulations including but not limited to Safety, Energy Efficiency, Wireless, EMC that impact your industries.
Leverage our global regulatory expertise to quickly gain access to your priority markets or continued market access, contact gma.news@ul.com for more information.
Previous updates
This information is for general information purposes only and is not intended to constitute a definitive or complete statement of the law or regulation on any subject and should not be exclusively relied upon for legal or regulatory compliance purposes.
- November 2023 updates
Regulation Country Published Date Summary Toys European Union 10/25/2023 EU: CEN Publishes CEN/TS 17973:2023 Safety of toys - Categorization of slime type materials
The European Committee for Standardization (CEN) has published CEN/TS 17973:2023 Safety of toys - Categorization of slime type materials.
This document specifies a test method for categorization of slime-type products to support users of EN 71-3 in the categorization of products with slime-like behaviour into material categories 1 (dry, brittle, powder-like or pliable toy material) or 2 (liquid or sticky toy materialToys New Zealand 11/04/2023 Standards New Zealand Issues AS/NZS ISO 8124.3:2021 A1 Safety of toys, Part 3: Migration of certain elements Amendment No. 1 to adopt ISO 8124 2:2023
Standards New Zealand has issued AS/NZS ISO 8124.3:2021 A1 Safety of toys, Part 3: Migration of certain elements Amendment No. 1 to adopt ISO 8124 2:2023.
ISO 8124 2:2023 specifies the categories of flammable materials that are prohibited in all toys, as well as requirements concerning the flammability of certain toys when they are subjected to a small source of ignition.
Amendment applies to the following elements:- Front cover
- Preface.
- Amendment 1
Chemicals USA 9/28/2023 USA EPA Finalizes Reporting and Recordkeeping Requirements for Per- and Polyfluoroalkyl Substances (PFAS) including PFAS-Containing Articles
On September 28, 2023, the Environmental Protection Agency (EPA) released pre-publication notice on TSCA Section 8(a)(7) Reporting and Recordkeeping Requirements for Per- and Polyfluoroalkyl Substances (PFAS).
This document was submitted for Final Rule publication in the Federal Register (FR) and will not be considered as the official version.
Official sourceChemicals USA 10/11/2023 USA EPA Publishes Final Rule on Toxic Substances Control Act Reporting and Recordkeeping Requirements for Perfluoroalkyl and Polyfluoroalkyl Substances
On October 11, 2023, the Environmental Protection Agency (EPA) published Toxic Substances Control Act Reporting and Recordkeeping Requirements for Perfluoroalkyl and Polyfluoroalkyl Substances.
In accordance with obligations under TSCA, EPA is requiring persons that manufacture (including import) or have manufactured these chemical substances in any year since January 1, 2011, to submit information to EPA.
Official sourceChemicals, Sustainability France 10/12/2023 France Minister for Ecological Transition Publishes Three Ministerial Orders on Provision of Information Enabling the Identification of Endocrine Disruptors in Products
On October 12, 2023, the Ministry of Ecological Transition and Territorial Cohesion published three Ministerial Orders regarding consumer information on the presence of endocrine disruptors in products:
1. Order of September 28, 2023, relating to the provision of information allowing the identification of endocrine disruptors in a product by means of an application;
2. Order of September 28, 2023, establishing the list of substances presenting endocrine disrupting properties mentioned in I and II of Article L. 5232-5 of the Public Health Code and the categories of products presenting a particular exposure risk mentioned in II of article L. 5232-5 of the public health code; and
3. Order of September 28, 2023 specifying the terms relating to the content and conditions of presentation of the information provided for in I and II of Article L. 5232-5 of the Public Health Code.
Official sourceCyber Security, Wireless Singapore 9/22/2023 Singapore CSA Publishes Cybersecurity Labelling Scheme for IoT
On September 22, 2023, the Cyber Security Agency of Singapore (CSA) published the following documents:
- Cybersecurity Labelling Scheme for IoT Publication No. 1 Overview of the Scheme Version 1.3
- Cybersecurity Labelling Scheme for IoT Publication No. 2 Scheme Specifications Version 1.3
- Cybersecurity Labelling Scheme for IoT Publication No. 3 Requirements for Testing Laboratory Version 1.3
- Cybersecurity Labelling Scheme for IoT Publication No. 4 Assessment Methodology Version 1.0.
Official sourceElectrical and Electronic Waste Dominican Republic 7/14/2023 Dominican Republic MMARN Notifies Decree on Regulation for the Comprehensive Management of Waste Electrical and Electronic Devices within the Framework of Extended Producer Responsibility (EPR)
On October 11, 2023, the Ministry of Environment and Natural Resources (MMARN) notified the establishment of Decree 253-23 Regulation for the Comprehensive Management of Waste Electrical and Electronic Equipment within the Framework of Extended Producer Responsibility (EPR). This will strengthen the regulatory framework to appropriately manage waste electrical and electronic devices in Dominican Republic.
Official sourceEMC EU 10/20/2023 European Union CENELEC Publishes New Standard EN IEC 61800-3:2023 - EMC Requirements for PDS and Machine Tools
On October 20, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61800-3:2023 for adjustable speed electrical power drive systems - EMC requirements and specific test methods for PDS and machine tools.
Date of withdrawal of superseded version is on August 9, 2026.
Official sourceEMC, Energy Efficiency, RoHS, Safety, Chemicals Taiwan 9/27/2023 Taiwan BSMI Issues Amendments to the Legal Inspection Requirements of BSMI Certification for Freezers
On September 27, 2023, the Bureau of Standards, Metrology and Inspection (BSMI) of the Ministry of Economic Affairs (MOEA) published the amended Legal Inspection Requirements for Household Electrical Appliances to extend the scope of the BSMI certifications to upright and horizontal freezers with storage volumes not exceeding 700 liters. The amendment of regulation becomes effective on the same day.
Official sourceEMC, Energy Efficiency, RoHS, Safety, Chemicals Taiwan 9/27/2023 Taiwan BSMI Issues Regulation for Mandatory BSMI Certification Requirements of Portable Air Conditioners
On September 27, 2023, the Bureau of Standards, Metrology and Inspection (BSMI) of the Ministry of Economic Affairs (MOEA) issued Legal Inspection Requirements for Portable Air Conditioners Appliances Products to include portable air conditioners into the BSMI certification scope. The amendment of regulation becomes effective on the same day.
Official sourceEMC, Energy Efficiency, RoHS, Safety, Wireless, Explosive Atmospheres, Chemicals United Kingdom 10/3/2023 United Kingdom DBT Updates Guidance for Placing Manufactured Goods on the Market in Northern Ireland and Guidance on Using UKNI Marking
On October 3, 2023, the United Kingdom Department of Business and Trade (DBT) updated the guidance on placing manufactured goods on the market in Northern Ireland as well as the guidance on using the UKNI marking.
Updates include the following:
- Technical documentation section and information on when to use the CE marking added.
- NI's unfettered access to the UK and legal responsibilities added.
- Information added to moving goods from NI and placing goods on EU market sections.
- Webinars section removed.
Official sourceEMC, Safety
EU
9/29/2023
European Union CENELEC Publishes New Standard EN IEC 61439-7:2023 - Low-Voltage Switchgear and Controlgear Assemblies for Marinas, Camping Sites, Market Squares, Electric Vehicle Charging Stations
On September 29, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61439-7:2023 for low-voltage switchgear and control gear assemblies - assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations.
Date of withdrawal of superseded version is on September 6, 2026.
Official sourceEMC, Safety
Vietnam
10/11/2023
Vietnam MOST Prepares Draft Technical Regulation on Electrical Equipment for Household Electrical and Similar Installations
On October 11, 2023, the Ministry of Science and Technology prepared QCVN:2023/BKHCN draft technical regulation on electrical equipment for household electrical and similar Installations. This technical regulation regulates the safety and management requirements of electrical equipment for domestic electrical installations and similar installations.
Any comments on this draft technical regulation can be submitted until December 10, 2023.
Official sourceEMC, Safety, Wireless
Moldova
10/4/2023
Republic of Moldova Publishes Revised Frequency Allocation Table
On October 4, 2023, the Republic of Moldova published under State Radio Frequency Commission Decision No. 1 of 15.09.2023 regarding the approval of the changes made to the National Table for Allocation of Frequency Bands.
Official sourceEMC, Wireless
South Korea
10/11/2023
South Korea RRA Opens Public Consultation on Partial Revision of Conformity Assessment of Broadcasting and Communication Equipment
On October 11, 2023, the South Korean National Radio Research Agency (RRA) opened a public consultation on the partial revision of Notice on Conformity Assessment of Broadcasting and Communication Equipment, etc. under National Radio Research Institute Notice No. 2023-85.
Comments are accepted until December 11, 2023.
Official sourceEnergy Efficiency
Canada
8/19/2023
Canada NRCan Publishes Notice of Intent to Align Energy Efficiency Requirements for Six Appliances with U.S. Standards
On August 19, 2023, the Department of Natural Resources of Canada published a notice of intent to align energy efficiency requirements of refrigerators, refrigerator-freezers, freezers, dishwashers, clothes washers, and clothes dryers with the United States standards.
These new requirements will come into effect in 2024.
Official sourceEnergy Efficiency
New Zealand
9/25/2023
New Zealand EECA Proposes Amendments to Energy Efficiency Regulation for Clothes Washing Machine and Rotary Dryers
On September 25, 2023, New Zealand Energy Efficiency and Conservation Authority (EECA) proposed amendments to Energy Efficiency Regulation for clothes washing machine and rotary dryers. The purpose of this regulation is to align New Zealand's energy requirements for clothes washing machines and rotary dryers with the relevant Australian Greenhouse and Energy Minimum Standards Determinations.
Official sourceEnergy Efficiency
EU
9/20/2023
European Union EC Publishes Latest Directive on General Energy Efficiency
On September 20, 2023, the European Commission (EC) published Directive (EU) 2023/1791 of the European Parliament and of the Council of 13 September 2023 on energy efficiency and amending Regulation (EU) 2023/955 (recast). This directive provides measures to promote energy efficiency in the EU. This should ensure targets on energy efficiency are met and enables further energy efficiency improvements.
This directive entered into force on October 10, 2023.
Official sourceEnergy Efficiency
New Zealand
9/25/2023
New Zealand EECA Proposes Amendments to Energy Efficiency Regulation for Dishwashers
On September 25, 2023, the New Zealand Energy Efficiency and Conservation Authority (EECA) proposed amendments to Energy Efficiency Regulation for dishwashers. The purpose of this regulation is to align New Zealand's energy requirements for dishwashers with the relevant Australian Greenhouse and Energy Minimum Standards Determinations.
Official sourceEnergy Efficiency
USA
9/26/2023
USA DOE Publishes Direct Final Rule for the Energy Test Procedure for Commercial Refrigerators, Refrigerator-Freezers, and Freezers
On September 26, 2023, the US Department of Energy (DOE) published final rule for the energy conservation test procedure of commercial refrigerators, refrigerator-freezer, and freezers.
The test methods for commercial refrigerators, refrigerator-freezers, and freezers have been updated by the U.S. Department of Energy (DOE) to include references to the most recent iterations of the relevant industry standards.
Additionally, DOE adopts test procedures that are in line with recently published waivers and interim waivers, defines new equipment category definitions, establishes product-specific enforcement provisions, permits volume determinations based on computer-aided designs, outlines a sampling plan for volume and total display area, and adopts additional clarifying amendments
Official sourceEnergy Efficiency
United Kingdom
9/28/2023
United Kingdom DESNZ & OPSS Publish Updated List of Energy-Related Consuming Products
On September 28, 2023, the Department for Energy Security and Net Zero (DESNZ) and Office for Product Safety and Standards (OPSS) published the updated list of energy-related products and applicable legislation.
List were updated showing the energy-related products with its associated regulations.
Official sourceEnergy Efficiency
Ukraine
9/22/2023
Ukraine Approves Technical Regulation on Eco-design for Light Sources and Separate Control Gears
On September 27, 2023, the Cabinet Ministers of Ukraine published the adoption of Resolution dated September 22, 2023 No. 1018 on the Approval of the Technical Regulation on Eco-design Requirements for Light Sources and Separate Control Gears. This adoption was also announced in World Trade Organization (WTO) website.
Official sourceEnergy Efficiency
EU
9/26/2023
European Union (EC) Publishes Amendments to the Energy Labelling Directives on Several Appliances
On September 26, 2023, the European Commission published Commission Delegated Regulation (EU) 2023/2048 of 4 July 2023 correcting Delegated Regulations (EU) No 626/2011, (EU) 2019/2015, (EU) 2019/2016 and (EU) 2019/2018 with regard to energy labelling requirements of air conditioners, light sources, refrigerating appliances, and refrigerating appliances with a direct sales function. This directive contains amendments reflecting some rephrasing and re-wordings of specific energy labelling directives and updating actual energy label visual figures for reference.
The changes entered into force on September 30, 2023.
Official sourceEnergy Efficiency
Serbia
8/4/2023
Serbia Ministry of Mining and Energy Issues Eco-Design Requirements for Simple Set-Top Box Devices
On August 4, 2023, the Ministry of Mining and Energy published in the Official Gazette of RS No. 65, page 94, the regulation on eco-design requirements for simple set-top box devices (65/2023-94). This regulation entered into force on August 12, 2023, and will apply from March 1, 2024.
Official sourceEnergy Efficiency
Australia
9/20/2023
Australia Federal Government Publishes Amendment of Greenhouse and Energy Minimum Standards (GEMS) Act 2012
On September 20, 2023, the Australian Federal Government published Greenhouse and Energy Minimum Standards Amendment (Administrative Changes) Act 2023. This Act amends the GEMS Act 2012 with the purpose to make it easier for businesses and industry to comply with the regulations and provide flexibility to introduce more energy efficient products in the Australian market.
Official sourceEnergy Efficiency
USA
9/28/2023
USA DOE Publishes Final Rule for the Energy Conservation Standards for Dedicated Purpose Pool Pump Motors
On September 28, 2023, the US Department of Energy (DOE) published the final rule for the energy conservation standards for dedicated purpose pool pump.
Official sourceEnergy Efficiency
USA
9/28/2023
USA DOE Publishes Proposed Rules for the Energy Conservation Standards for Walk-In Coolers and Freezers
On September 28, 2023, the US Department of Energy (DOE) published proposed rules for the energy conservation standards for walk-in coolers and freezers.
DOE will accept comments, data, and information regarding the September 2023 NOPR as supplemented by this notice of data availability no later than November 6, 2023.
Official sourceEnergy Efficiency
India
10/4/2023
India BEE Releases Important Instructions to All Manufacturers and Permittees of Chillers Under STAR Labelling Scheme
On October 4, 2023, the Bureau of Energy Efficiency (BEE) published an advisory related to important instruction to all manufacturers and permittees of chillers under STAR labelling scheme. This is with reference to the implementation of the mandatory regime of chillers with effect from January 1, 2024, and accordingly the label validity period.
Official sourceEnergy Efficiency
USA
9/29/2023
USA DOE Publishes Proposed Rules for the Certification and Labeling Requirements, and Enforcement Provisions for Certain Consumer Products and Commercial Equipment
On September 28, 2023, the US Department of Energy (DOE) published proposed rules for the certification and labeling requirements, and enforcement provision for certain consumer products and commercial equipment.
DOE will accept comments, data, and information regarding this proposal no later than November 28, 2023.
Official sourceEnergy Efficiency
Taiwan
8/16/2023
Taiwan MOEA Issues Revised Draft Amendments to the Energy Efficiency Requirements of Dehumidifiers
On August 16, 2023, the Ministry of Economic Affairs (MOEA) opened for public comment the revised draft amendment to the Requirements on Minimum Energy Performance Standard, Energy Efficiency Rating Labelling and Inspection for Dehumidifiers (former name: Requirements on Labelling and Inspection of Energy Consumption and Energy Efficiency Rating and Minimum Energy Performance Standards for Dehumidifiers) until October 16, 2023.
Official sourceEnergy Efficiency
USA
10/3/2023
USA DOE Publishes Proposed Rules for the Energy Conservation Standards for Metal Halide Lamp Fixtures
On October 3, 2023, the US Department of Energy (DOE) published proposed rules for the energy conservation standards for metal halide lamp fixtures.
DOE will hold a public webinar upon request. Please request a public webinar no later than October 17, 2023.
Official sourceEnergy Efficiency
USA
10/6/2023
USA DOE Publishes Proposed Determination for the Energy Conservation Standards for Consumer Furnace Fans
On October 6, 2023, the US Department of Energy (DOE) published proposed rules for the energy conservation standards for consumer furnace fans.
Written comments and information are requested and will be accepted on or before December 5, 2023
Official sourceEnergy Efficiency
USA
10/6/2023
USA DOE Publishes Final Rule for the Energy Conservation Standards for Commercial Water Heating Equipment
On October 6, 2023, the US Department of Energy (DOE) published final rule regarding the commercial water heating equipment.
The effective date of this rule is December 5, 2023. Compliance with the amended standards established for CWH equipment in this final rule is required on and after October 6, 2026.
Official sourceEnergy Efficiency
El Salvador
8/30/2023
El Salvador OSARTEC Adopts Central American Technical Regulation for Energy Efficiency Specifications of Refrigerators and Freezers Appliances
On August 30, 2023, the Salvadoran Agency for Technical Regulation (OSARTEC) approved technical regulation RTCA 97.01.81:22 Electrical Products. Refrigerators and Freezers Appliances. Energy Efficiency Specifications. This technical regulation deals with the energy efficiency specifications of electrical products particular for refrigerators and freezers appliances.
Official sourceEnergy Efficiency
Indonesia
10/3/2023
Indonesia MEMR Publishes Mandatory Energy Efficiency Regulation for Refrigerated Display Case
On October 3, 2023, the Ministry of Energy and Mineral Resources (MEMR) published Decree No. 126.K/EK.06/DJE/2023. This new regulation establishes minimum energy performance standards and energy saving mark labels for refrigerated display case (RDC) energy utilizing equipment.
Official sourceEnergy Efficiency
Costa Rica
9/26/2023
Costa Rica MINAE Grants Regulatory Equivalence between Various Technical Standards and Costa Rican Technical Regulation
On September 26 and 27, 2023, the Ministry of Environment and Energy (MINAE) approved the regulatory equivalence request presented by different companies shown below between different technical standards and Executive Decree 43616-COMEX-MEIC-MINAE that publishes Resolution No. 451-2021 (COMIECO-XCVIII), dated December 17, 2021, and its Annex Central American Technical Regulation (RTCA) No. 23.1.78:00: Energy Efficiency Requirements for Split Type (Inverter), Variable Coolant Flow, Free Discharge and Ductless Air Conditioners.
- Refrimundo SA
- Leaho Industrial Refrigeration SA
- Beirute Industrial Refrigeration SA
- Cooper and Tools Cat SRL
- MABECA SA Appliances
- Whirlpool Costa Rica SRL
- HI TEC SA
Official sourceEnergy Efficiency
Uruguay
10/12/2023
Uruguay UNIT Publishes Standard UNIT 1170:2023 Seasonal Energy Efficiency - Air Conditioners - Specifications and Labeling
On October 12, 2023, the Uruguayan Institute of Technical Standards (UNIT) published a standard on seasonal energy efficiency specifications and labeling for air conditioners under UNIT 1170:2023.
Official sourceEnergy Efficiency
Uruguay
10/12/2023
Uruguay UNIT Publishes Standard UNIT 1138:2023 Energy Efficiency – Refrigeration Appliances for Domestic Use – Specifications and Labeling
On October 12, 2023, the Uruguayan Institute of Technical Standards (UNIT) published a standard on energy efficiency specifications and labeling for refrigeration appliances for domestic use under UNIT 1138:2023.
Official sourceEnergy Efficiency
USA
10/10/2023
USA DOE Publishes Proposed Rule for the Energy Conservation Standards for Commercial Refrigerators, Freezers, and Refrigerator-Freezers
On October 10, 2023, the US Department of Energy (DOE) published proposed rules for the energy conservation standards for commercial refrigerators, freezers, and refrigerator-freezers.
DOE will accept comments, data, and information regarding this NOPR no later than December 11, 2023.
Official sourceEnergy Efficiency
India
10/12/2023
India BEE Releases Advisory to All Manufacturers/Permittees Registered under S&L Program for Pumpsets
On October 12, 2023, the Bureau of Energy Efficiency (BEE) published important instructions for all manufacturers/permittees of pumpsets registered under Star & Labelling program.
Official sourceEnergy Efficiency
Saudi Arabia
10/13/2023
Saudi Arabia SASO Approves Update and Amendment of Technical Regulation for Energy Efficiency
On October 13, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) approved the update and amendment of technical regulation for energy efficiency.
Official sourceEnergy Efficiency
South Korea
10/10/2023
South Korea KEA Publishes Information on Expansion of Automatically Approved Items Reported for Efficiency Management Equipment
On October 10, 2023, the Korea Energy Agency (KEA) announced that it will expand the list of equipment under report automatic approval function and published Efficiency Management Equipment Report Automatic Approval User Manual.
Official sourceEnergy Efficiency
Panama
9/14/2023
Panama MICI Adopts Central American Technical Regulation for Energy Efficiency Specifications of Refrigerators and Freezers Appliances
On September 14, 2023, the Ministry of Commerce and Industry (MICI) adopted the Central American technical regulation RTCA 97.01.81:22 through Resolution No. 59. This technical regulation deals with the energy efficiency specifications of electrical products specifically for refrigerators and freezers appliances.
Official sourceEnergy Efficiency
South Africa
10/5/2023
South Africa Department of Trade, Industry and Competition Publishes Proposes Compulsory Specification for Efficiency Requirements of Electric Motors
On October 5, 2023, the Department of Trade, Industry and Competition published National Regulator for Compulsory Specifications Act (5/2008), Amended through Legal Metrology Act (9/2014) - Proposed Compulsory Specification for Efficiency Requirements of Electric Motors (VC 9113).
Comment were accepted until November 5, 2023.
Please contact your local UL Solutions office for more information.Energy Efficiency
USA
10/12/2023
USA DOE Publishes Correction for the Final Rule of the Energy Conservation Standards for Dedicated Purpose Pool Pump Motors
On October 12, 2023, the US Department of Energy (DOE) published a correction regarding the final rule for the energy conservation standards for dedicated purpose pool pump.
Official sourceEnergy Efficiency
Global
10/20/2023
IEC Publishes New Standard IEC 61800-9-2:2023 - Energy Efficiency Determination & Classification for Adjustable Speed Electrical Power Drive Systems
On October 20, 2023, the International Electrotechnical Commission (IEC) released IEC 61800-9-2:2023. This standard deals with adjustable speed electrical power drive systems, specifically the eco-design for motor systems.
Official sourceEnergy Efficiency
USA
10/20/2023
USA DOE Publishes Direct Final Rule for the Energy Conservation Standards for Electric Motors
On October 20, 2023, the US Department of Energy published the direct final rule confirming the effective and compliance date of the energy efficiency standards for electric motors.
Official sourceEnergy Efficiency, Performance
Australia
9/15/2023
Australia Standards Publishes AS 5102.1:2019 Amd 2:2023 - Measurement of Energy Consumption and Performance for Swimming Pool Pump Units
On September 15, 20223, the Standards Australia published AS 5102.1:2019 Amendment 2:2023. This Standard specifies requirements for the determination of energy consumption of swimming pool pump units operating on single-phase electricity.
Official sourceEnergy Efficiency, Performance
Global
9/8/2023
ISO Publishes New Standard for General Requirements of Energy Classification for Many Types of Fans (ISO 12759-1:2023)
On September 8, 2023, the International Organization for Standardization (ISO) published ISO 12759-1:2023 Fans — Efficiency Classification for Fans — Part 1: General Requirements to Guide to the User and Legislator in Determining the Fan Efficiency by Identifying Fan Types and Installation Categories.
Official sourceEnergy Efficiency, Performance
Kuwait
10/8/2023
Kuwait PAI Publishes New Mandatory Standards for Energy Efficiency
On October 8, 2023, the Public Authority for Industry (PAI) published Ministerial Resolution n. 16/2023 regarding adoption of 4 new mandatory standards for energy efficiency and performance.
Please contact your local UL Solutions office for more information.Energy Efficiency, Performance, Sustainability
EU
9/28/2023
European Union (EC) Reviews the Eco-design and Energy Labeling Requirements for Solid-fuel Boilers
On September 28, 2023, the European Commission (EC) opened initiatives to review the eco-design and energy labelling requirements for solid-fuel boilers. This plans to tackle material efficiency issues such as durability, reparability and recyclability.
Comments are accepted until December 21, 2023.
Official sourceEnergy Efficiency, RoHS, Safety, Chemicals
Saudi Arabia
10/13/2023
Saudi Arabia SASO Approves Update and Amendment of Technical Regulation for Individual Electric Mobility (Scooters)
On October 13, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) approved the update and amendment of technical regulation for individual electric mobility (scooters).
Official sourceEnergy Efficiency, Safety
Taiwan
9/19/2023
Taiwan BSMI Announces New and Revised National Standards Related to Robotics, Household Appliances and Lamps
On September 19, 2023, the Bureau of Standards, Metrology and Inspection (BSMI) announced in the National Standards of the Republic of China (CNS) service system the release of new national standards for robotics, amended national standards for household appliances, and revised national standards for lamps.
Official sourceF Gas, Chemicals
New Zealand
9/29/2023
New Zealand Ministry for the Environment Updates Public Consultation on Proposed Measures to Reduce the Environmental Impact of Fluorinated Gases
On September 29, 2023, the Ministry for the Environment released an update on public consultation related to proposed measures to reduce the environmental impact of fluorinated gases through World Trade Organization (WTO) website.
The proposed prohibitions set out the policies to reduce the contribution of F-gases to New Zealand’s greenhouse gas emissions, recognizing the negative impact of these substances on the climate.
Official sourceF Gas, Chemicals
EU
10/5/2023
European Union Parliament and the Council Reach a Provisional Agreement on New Regulations to Reduce Emissions of Fluorinated Gases and Ozone-depleting Substances
On October 5, 2023, the European Parliament and the Council reached a provisional agreement on new regulations related to reduction of greenhouse gas (GHG) emissions from fluorinated gases (F-gases) and ozone-depleting substances (ODS).
This provisional agreement finalizes negotiations on fluorinated greenhouse gases (F-gases) and confirms an informal agreement reached in June on ozone-depleting substances (ODSs).
Official sourceF Gas, Chemicals
Brazil
10/5/2023
Brazil IBAMA Reports on Implementation of the Kigali Amendment to Reduce HFCs
On October 5, 2023, the Brazilian Institute of Environment and Renewable Natural Resources (IBAMA) announced future publication of a Normative Instruction (IN) to implement Kigali Amendment to reduce hydrofluorocarbons (HFCs) in Brazil.
This new stage in the implementation will take Brazil into new steps in reducing the emission of HFCs that greatly contribute to global warming.
Official sourceF Gas, Chemicals
USA
10/19/2023
USA EPA Publishes Proposed Rule on Phasedown of Hydrofluorocarbons: Management of Certain Hydrofluorocarbons & Substitutes under Subsection (h) of the American Innovation & Manufacturing Act 2020
On October 19, 2023, the Environmental Protection Agency (EPA) published a proposed rule entitled Phasedown of Hydrofluorocarbons: Management of Certain Hydrofluorocarbons and Substitutes Under Subsection (h) of the American Innovation and Manufacturing Act of 2020 (88 FR 72216).
This proposal discusses:
- Management of regulated substances;
- Amendments to Resource Conservation and Recovery Act (RCRA); and
- Enforcement and compliance.
The comments on this proposed rule must be received on or before December 18, 2023.
Official sourceNoise
Global
10/3/2023
IEC Publishes New Standard IEC 60704-2-13 - Requirements for Cooking Fume Extractors
On October 3, 2023, the International Electrotechnical Commission (IEC) released IEC 60704-2-13:2023. This standard deals with the test code for the determination of airborne acoustical noise for cooking fume extractors.
Official sourcePerformance
EU
9/29/2023
European Union CENELEC Publishes New Standard EN IEC 60851-3:2023 - Winding Wires Mechanical Properties
On September 29, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 60851-3:2023 for winding wires - test methods - mechanical properties.
Date of withdrawal of superseded version is on September 26, 2026.
Official sourcePerformance
EU
10/6/2023
European Union CENELEC Publishes Amended Standard EN 62751-2:2014/A2:2023 - Modular Multilevel Converters for High-Voltage Direct Current (HVDC) Systems
On October 6, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 62751-2:2014/A2:2023 for power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems : modular multilevel converters.
Official sourcePerformance
EU
10/13/2023
European Union CENELEC Publishes New Standard EN 50194-1:2023 - Electrical Apparatus for Detection of Flammable Gases in Household Premises
On October 13, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN 50194-1:2023 for electrical apparatus for the detection of flammable gases in household premises - test methods and performance requirements.
Date of withdrawal of superseded version is on August 14, 2026.
Official sourcePerformance
Taiwan
9/7/2023
Taiwan BSMI Announces New Standards for the Performance Criteria of Service Robots
On September 7, 2023, the Bureau of Standards, Metrology and Inspection (BSMI) announced in the National Standards of the Republic of China (CNS) service system the release of new national standards for the performance criteria and related test methods for service robots.
Official sourcePerformance, Safety
Global, CB Scheme
10/13/2023
IECEE Adds New Test Report Forms (TRFs) on Week 41
On October 13, 2023, new TRFs were published and added to the IECEE website.
Official sourcePerformance, Safety
China
10/11/2023
China CNCA Issues Implementation Rule for Voluntary Product Certification of Stationary Echelon Utilization Battery
On October 11, 2023, the Certification and Accreditation Administration of the People’s Republic of China (CNCA) published Announcement No. 19 of 2023, releasing the new Implementation Rules for the Certification of New Energy Vehicle Power Battery Echelon Utilization Products—Stationary Echelon Utilization Battery (CNCA: EBEU-01:2023). The announcement will be effective from the same day.
Official sourcePerformance, Safety, EMC
Global, CB Scheme
9/29/2023
IECEE Adds New Equipment List on Week 39
On September 29, 2023, a new testing equipment list was published and replaced to the IECEE website.
Official sourceRoHS, Chemicals
EU
10/20/2023
European Union EC Publishes Draft Commission Delegated Directive on Exemption for Cadmium in Downshifting Quantum Dots Directly Deposited on LED Semiconductor Chips
On October 20, 2023, the European Commission published Draft Commission Delegated Directive Amending Directive 2011/65/EU of the European Parliament and of the Council as regards an Exemption for Cadmium in Downshifting Quantum Dots Directly Deposited on LED Semiconductor Chips through World Trade Organization (WTO) website.
The final date for comments is December 19, 2023.
Official sourceSafety
Global, CB Scheme
9/22/2023
IECEE Adds New Equipment List on Week 38
On September 22, 2023, a new testing equipment list was published and replaced to the IECEE website.
Official sourceSafety
Thailand
9/28/2023
Thailand OCPB Publishes Announcement on Determination for Products Containing Laser Light as Label-controlled Products
On September 28, 2023, the Office of the Consumer Protection Board (OCPB) published Announcement of the Committee on Labels regarding products containing laser light as label-controlled products. This announcement specifies that products containing laser light as a component are considered as label-controlled products.
Official sourceSafety
Global
9/29/2023
IEC Publishes New Standard IEC 60512-99-003:2023 - Endurance Test Schedules Connectors for Electrical and Electronic Equipment
On September 29, 2023, the International Electrotechnical Commission (IEC) released IEC 60512-99-003:2023. This standard deals with test schedule for balanced single-pair connectors separating (unmating) under electrical load.
Official sourceSafety
Global
9/29/2023
IEC Publishes New Standard IEC 60335-2-89:2019/COR3 2023 - Requirements for Commercial Refrigerating Appliances and Ice-makers
On September 29, 2023, the International Electrotechnical Commission (IEC) released IEC 60335-2-89:2019/COR3:2023. This standard deals with the requirements for commercial refrigerating appliances and icemakers with an incorporated or remote refrigerant unit or motor-compressor.
Official sourceSafety
China
9/22/2023
China CNCA Publishes Announcement on Revising Compulsory Product Certification Implementation Rules for Electric Bicycles
On September 22, 2023, the Certification and Accreditation Administration of the People’s Republic of China (CNCA) published an announcement No. 18 of 2023 to revise the old certification rules CNCA-C11-16:2021 Compulsory Product Certification Implementation Rules for Electric Bicycles to the new version CNCA-C11-16:2023, which was effective on September 14, 2023.
Official sourceSafety
Global, CB Scheme
9/29/2023
IECEE Adds New Test Report Forms (TRFs) on Week 39
On September 29, 2023, new TRFs were published and added to the IECEE website.
Official sourceSafety
United Arab Emirates
9/21/2023
UAE MoIAT Prepares Draft Cabinet Resolution Regarding List of Physiological Requirements for Electrical Vehicle Systems
On September 21, 2023, the Ministry of Industry and Advanced Technology (MoIAT) prepared a draft cabinet resolution regarding list of physiological requirements for electrical vehicle systems.
The deadline for comments is November 20, 2023.
Official sourceSafety
EU
9/29/2023
European Union CENELEC Publishes New Standard EN IEC 62208:2023 - Empty Enclosures for Low-Voltage Switchgear and Controlgear Assemblies
On September 29, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 62208:2023 for empty enclosures for low-voltage switchgear and control gear assemblies - general requirements.
Date of withdrawal of superseded version is on September 6, 2026.
Official sourceSafety
Global
9/29/2023
IEC Publishes New Standard IEC 61439-1:2020/COR2:2023 – General Rules of Low-voltage Switchgear and Controlgear Assemblies
On September 29, 2023, the International Electrotechnical Commission (IEC) released IEC 61439-1:2020/COR2:2023. This standard deals with the general rules of low-voltage switchgear and control gear assemblies.
Official sourceSafety
Colombia
9/27/2023
Colombia Ministry of Mines & Energy Publishes Draft Technical Regulation Update for Electrical Installations (RETIE)
On September 27, 2023, the Ministry of Mines and Energy of Colombia published the draft resolution by which the technical regulation of electrical installation RETIE is modified.
Modification of the deadline to submit comments is on November 26, 2023.
Official sourceSafety
Saudi Arabia
10/4/2023
Saudi Arabia SASO Proposes Draft Amendment to Technical Regulation for Gas Appliances and Accessories
On October 4, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) proposed draft amendment to technical regulation for gas appliances and accessories.
Comments and feedbacks were submitted until November 2, 2023.
Official sourceSafety
Canada
9/26/2023
Canada SCC Publishes Draft Standard CSA C22.2 NO. 60730-2-23 - Requirements for Electrical Sensors and Sensing Elements
On September 26, 2023, the Standards Council of Canada (SCC) published a draft new standard CSA C22.2 NO. 60730-2-23 which deals with the requirements for electrical sensors and sensing elements.
Comments were accepted until October 26, 2023.
Official sourceSafety
Canada
9/25/2023
Canada SCC Publishes Draft Standard C22.2 NO. 60335-2-118 - Requirements for Professional Ice-cream Makers
On September 25, 2023, the Standards Council of Canada (SCC) published a draft new standard C22.2 NO. 60335-2-118 which deals with the requirements for professional ice-cream makers.
Comments were accepted until October 26, 2023.
Official sourceSafety
EU
10/6/2023
European Union CENELEC Publishes Amended Standard EN 60670-21:2007/A1:2023 - Boxes and Enclosures with Provision for Suspension Means
On October 6, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60670-21:2007/A1:2023 for boxes and enclosures for electrical accessories for household and similar fixed electrical installations - particular requirements for boxes and enclosures with provision for suspension means.
Official sourceSafety
EU
10/6/2023
European Union CENELEC Publishes Amended Standard EN 60670-21:2007/A11:2023 - Boxes and Enclosures with Provision for Suspension Means
On October 6, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60670-21:2007/A11:2023 for boxes and enclosures for electrical accessories for household and similar fixed electrical installations - particular requirements for boxes and enclosures with provision for suspension means.
Official sourceSafety
Global, CB Scheme
10/6/2023
IECEE Adds New Test Report Forms (TRFs) on Week 40
On October 6, 2023, new TRFs were published and added to the IECEE website.
Official sourceSafety
Thailand
10/6/2023
Thailand OCPB Publishes Announcement on Determination of Personal Computer and Computer Device as Label-Controlled Goods
On October 6, 2023, the Office of the Consumer Protection Board (OCPB) published through World Trade Organization (WTO) website the addendum of Notification of the Committee on Labels, titled Determination of Personal Computer and Computer Device as Label-Controlled Goods.
Official sourceSafety
Thailand
10/6/2023
Thailand OCPB Publishes Announcement on Determination of Halogen Oven as Label-Controlled Goods
On October 6, 2023, the Office of the Consumer Protection Board (OCPB) published through World Trade Organization (WTO) website the addendum of Notification of the Committee on Labels, titled Determination of Halogen Oven as Label-Controlled Goods.
Official sourceSafety
Thailand
10/6/2023
Thailand OCPB Publishes Announcement on Determination of Ultraviolet C Products as Label-Controlled Goods
On October 6, 2023, the Office of the Consumer Protection Board (OCPB) published through World Trade Organization (WTO) website the addendum of Notification of the Committee on Labels, titled Determination of Ultraviolet Radiation in the C Range of Wavelengths (Ultraviolet) as Label-Controlled Goods.
Official sourceSafety
EU
10/6/2023
European Union CENELEC Publishes Amended Standard EN IEC 61557-7:2022/A1:2023 - Phase Sequence of Electrical Safety in Low Voltage Distribution Systems
On October 6, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 61557-7:2022/A1:2023 for electrical safety in low voltage distribution systems up to 1 000 v ac and 1 500 v dc - equipment for testing, measuring or monitoring of protective measures - phase sequence.
Official sourceSafety
EU
10/6/2023
European Union CENELEC Publishes New Standard EN IEC 62788-2-1:2023 - Photovoltaic Modules Polymeric Materials - Frontsheet and Back sheet
On October 6, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 62788-2-1:2023 for safety requirements of measurement procedures for materials used in photovoltaic modules : polymeric materials - frontsheet and back sheet.
Official sourceSafety
GCC
10/10/2023
GSO Prepares Draft Amendment Standard for Household and Similar Electrical Appliances for Skin or Hair Care
On October 10, 2023, the GCC Standardization Organization (GSO) prepared draft amendment standard GSO 03/DS/ IEC 60335-2-23:2023 for household and similar electrical appliances - safety requirements for appliances for skin or hair care.
Comments and feedbacks can be submitted until December 5, 2023.
Official sourceSafety
United Kingdom
10/7/2023
United Kingdom DBT Publishes Updates on Guidance for UCKA & UKNI Markings and Placing Manufactured Products in Great Britain & Northern Ireland
On October 7, 2023, the United Kingdom Department of Business and Trade (DBT) published various updates for product safety.
Updates include the following:
- UKCA marking: conformity assessment and documentation
- Using the UKCA marking
- Using the UKNI marking
- Placing manufactured goods on the market in Northern Ireland
- Placing manufactured products on the market in Great Britain.
Official sourceSafety
Argentina
10/4/2023
Argentina Mercosur Releases Draft on Technical Regulation on Powertrains of Electric Vehicles
On October 4, 2023, the Southern Common Market (Mercosur) released Draft Resolution No. 09/23- MERCOSUR Technical Regulation on Powertrains of Electric Vehicles. This establishes technical requirements that E-vehicles must meet for road safety.
Comments are accepted until December 3, 2023.
Official sourceSafety
Ecuador
10/10/2023
Ecuador INEN Announces Details of Meeting of Technical Committee for Technical Regulation on Safety of Gas Kitchen Appliances
On October 10, 2023, the Ecuadorian Standardization Service (INEN) released the meeting schedule for the Standardization Technical Committee Gas Domestic Kitchens for NTE INEN 2259 Domestic Kitchen Appliances that Use Gaseous Fuels. Safety. Requirements and Methods of Test.
Official sourceSafety
Global
10/12/2023
IEC Publishes New Standard IEC 61095:2023 - Electromechanical Contactors for Household and Similar Purposes
On October 12, 2023, the International Electrotechnical Commission (IEC) released IEC 61095:2023. This standard deals with electromechanical contactors for household and similar purposes.
Official sourceSafety
EU
10/13/2023
European Union CENELEC Publishes Amended Standard EN 60269-6:2011/A1:2023 - Fuse-Links for Protection of Solar Photovoltaic Energy Systems
On October 13, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60269-6:2011/A1:2023 for low-voltage fuses - supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems.
Official sourceSafety
Global
10/13/2023
IEC Publishes New Standard IEC 61196-8-1:2023 - Blank Detail Specification for Semi-flexible Cables with Fluoropolymer Dielectric
On October 13, 2023, the International Electrotechnical Commission (IEC) released IEC 61196-8-1:2023. This standard deals with blank detail specification for semi-flexible cables with fluoropolymer dielectric.
Official sourceSafety
Global
10/13/2023
IEC Publishes New Standard IEC 61196-9-1:2023 - Blank Detail Specification for Flexible RF Coaxial Cables
On October 13, 2023, the International Electrotechnical Commission (IEC) released IEC 61196-9-1:2023. This standard deals with blank detail specification for flexible RF coaxial cables.
Official sourceSafety
Saudi Arabia
10/16/2023
Saudi Arabia SASO Prepares Draft Technical Regulation for General Requirements for Machinery Safety
On October 16, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) prepared draft technical regulation for general requirements for machinery safety.
Comments and feedback can be sent until December 15, 2023.
Official sourceSafety
Global
10/17/2023
IEC Publishes New Standard IEC 61439-4:2023 - Requirements for Assemblies for Construction Sites (ACS)
On October 17, 2023, the International Electrotechnical Commission (IEC) released IEC 61439-4:2023. This standard deals with the requirements for assemblies for construction sites (ACS).
Official sourceSafety
Global
10/19/2023
IEC Publishes New Standard IEC 61442:2023 - Test Methods for Accessories for Power Cables
On October 19, 2023, the International Electrotechnical Commission (IEC) released IEC 61442:2023. This standard deals with the test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV).
Official sourceSafety
Canada
10/5/2023
Canada SCC Publishes New Draft Standard CSA C22.2 No. 283 - Safety for Adapters in Use with Electric Vehicle Couplers
On October 5, 2023, the Standards Council of Canada (SCC) published a new draft standard CSA C22.2 No. 283 which deals with the safety for adapters in use with electric vehicle couplers.
Comments were accepted until November 1, 2023.
Official sourceSafety
Canada
10/2/2023
Canada SCC Draft Reaffirmation of CSA C22.2 NO. 182.2:M87 (R2019) - Industrial Locking Type, Special Use Attachment Plugs, Receptacles and Connectors
On October 2, 2023, the Standards Council of Canada (SCC) started the review of CSA C22.2 NO. 182.2:M87 (R2019). This standard deals with industrial locking type, special use attachment plugs, receptacle, and connectors.
Comments were accepted until November 1, 2023.
Official sourceSafety
Canada
10/2/2023
Canada SCC Draft Reaffirmation of CSA C22.2 NO. 182.5:14 (R2019) - Photovoltaic Connectors
On October 2, 2023, the Standards Council of Canada (SCC) started the review of CSA C22.2 NO. 182.5:14 (R2019). This standard deals with photovoltaic connectors.
Comments were accepted until November 1, 2023.
Official sourceSafety
Israel
10/19/2023
Israel MEI Notifies Stakeholders for Changes of Mandatory Standard SI 60745 Part 1 - Hand-held Motor-operated Electric Tools
On October 19, 2023, the Ministry of Economy and Industry (MEI) notified stakeholders for the changes of mandatory standard SI 60745 Part 1 - Hand-held Motor-operated Electric Tools - Safety General Requirements.
Official sourceSafety
EU
10/20/2023
European Union CENELEC Publishes New Standard EN IEC 61800-5-1:2023 - Adjustable Speed Electrical Power Drive Systems
On October 20, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 61800-5-1:2023 for adjustable speed electrical power drive systems - safety requirements - electrical, thermal and energy.
Date of withdrawal of superseded version is on October 20, 2026.
Official sourceSafety
Global, CB Scheme
10/20/2023
IECEE Adds New Equipment List on Week 42
On October 20, 2023, a new testing equipment list were published and replaced to the IECEE website.
Official sourceSafety
China
9/29/2023
China CNCA Issues Draft Implementation Rules for CCC Certification of Commercial Gas-Burning Appliances
On September 29, 2023, the Certification and Accreditation Administration of the People's Republic of China (CNCA) under the State Administration for Market Regulation (SAMR) published through the World Trade Organization (WTO) Notification No. G/TBT/N/CHN/1756, the draft CNCA-C24-02:202X Implementation Rules for Compulsory Product Certification of Commercial Gas-Burning Appliances for public comment until November 28, 2023.
Official sourceSafety
EU
10/20/2023
European Union CENELEC Publishes Amended Standard EN IEC 62040-1:2019/A1:2023 - Uninterruptible Power Systems (UPS)
On October 20, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 62040-1:2019/A1:2023 for uninterruptible power systems (UPS) - safety requirements.
Official sourceSafety
Ecuador
10/25/2023
Ecuador INEN Announces Details of Meeting of Technical Committee for Technical Regulation on Safety of Gas Kitchen Appliances
On October 25, 2023, the Ecuadorian Standardization Service (INEN) released the meeting schedule for the Standardization Technical Committee Gas Domestic Kitchens for NTE INEN 2259 Domestic Kitchen Appliances that Use Gaseous Fuels. Safety. Requirements and Methods of Test.
Official sourceSafety
South Korea
10/19/2023
South Korea, Consumer Goods Safety - KATS Published Safety Standards for Reusable Batteries (KC 10031) and Partial Revision of Safety Management Operation Guidelines
On October 19, 2023, the South Korea Korean Agency for Technology and Standards (KATS) published under Notice No. 2023-445 the newly established Secondary Cells and Batteries Containing Alkaline or Other Non-acid Electrolytes - Safety Requirements for Secondary Lithium Batteries to Repurpose Used Lithium Batteries (KC 10031) and the partial revision of Electrical Appliances and Household Items Safety Management Operation Guidelines.
Official sourceSafety
EU
10/27/2023
European Union CENELEC Publishes Corrigendum Standard EN IEC 62841-4-7:2022/AC:2023-10 - Pedestrian Controlled Walk-Behind Lawn Scarifiers and Aerators
On October 27, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard EN IEC 62841-4-7:2022/AC:2023-10 for electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – safety : particular requirements for pedestrian controlled walk-behind lawn scarifiers and aerators.
Official sourceSafety, Chemicals
Australia
9/8/2023
Australia Standards Publishes AS 60896.11:2023 - Requirements and Test Methods for Vented Type Stationary Lead Acid Batteries
On September 8, 2023, the Standards Australia published AS 60896.11:2023. This standard specifies general requirements and the main characteristics, together with corresponding test methods associated with all types and construction modes of lead-acid stationary batteries, excluding valve-regulated types.
Official sourceSafety, Chemicals
Australia
9/8/2023
Australia Standards Publishes AS 60896.22:2023 - Requirements for Valve Regulated Type Stationary Lead Acid Batteries
On September 8, 2023, the Standards Australia published AS 60896.22:2023. This standard aims to assist the specifier in the understanding of the purpose of each test contained within AS 60896.21 and provide guidance on a suitable requirement that will result in the battery meeting the needs of a particular industry application and operational condition.
Official sourceSafety, Chemicals
Australia
9/8/2023
Australia Standards Publishes AS 60896.21:2023 - Test Methods for Valve Regulated Stationary Lead Acid Batteries
On September 8, 2023, the Standards Australia published AS 60896.21:2023. This standard specifies the methods of test for all types and construction of valve regulated stationary lead acid cells and monobloc batteries used in standby power applications.
Official sourceSafety, Cyber Security, Wireless
Global, CB Scheme
10/6/2023
IECEE Adds New Equipment List on Week 40
On October 6, 2023, a new testing equipment list were published and replaced to the IECEE website.
Official sourceSafety, EMC
EU
9/29/2023
European Union CENELEC Publishes New Standard EN IEC 61439-5:2023 - Low-Voltage Switchgear and Controlgear Assemblies for Power Distribution in Public Networks
On September 29, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61439-5:2023 for low-voltage switchgear and control gear assemblies - assemblies for power distribution in public networks.
Date of withdrawal of superseded version is on September 6, 2026.
Official sourceSafety, EMC
Global, CB Scheme
10/20/2023
IECEE Adds New Test Report Forms (TRFs) on Week 42
On October 20, 2023, new TRFs were published and added to the IECEE website.
Official sourceSafety, EMC, Performance
South Korea
10/12/2023
South Korea MOTIE Publishes Partial Revision of Electric Equipment Technical Standards
On October 12, 2023, the South Korean Ministry of Trade, Industry and Energy (MoTIE) published the partial revision of Korean Electrical Equipment Regulations (notification no. 2023-197).
Official source,Safety, Performance
EU
10/6/2023
European Union CENELEC Publishes Amended Standard EN IEC 60601-2-76:2019/A1:2023 - Low Energy Ionized Gas Haemostasis Equipment
On October 6, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 60601-2-76:2019/A1:2023 for medical electrical equipment - particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment.
Official sourceSafety, Performance
EU
10/20/2023
European Union CENELEC Publishes New Standard EN IEC 61800-5-3:2023 - Functional, Electrical and Environmental Requirements for Encoders
On October 20, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61800-5-3:2023 for adjustable speed electrical power drive systems - safety requirements - functional, electrical and environmental requirements for encoders.
Official sourceSanitation
EU
9/27/2023
European Union EC Publishes Draft Decision on European Positive Lists of Substances, Compositions & Constituents Authorized for Use in Products that Come into Contact with Water for Human Consumption
On September 27, 2023, the European Commission (EC) published Draft Commission Implementing Decision laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council by establishing the European positive lists of starting substances, compositions and constituents authorized for use in the manufacture of materials or products that come into contact with water intended for human consumption through World Trade Organization (WTO) website.
The final date for comments is November 26, 2023.
Official sourceSanitation
Argentina, Brazil, Paraguay, Uruguay
9/28/2023
MERCOSUR Publishes Draft Resolution on Modification of Technical Regulations on Positive List of Monomers, Starting Substances & Polymers for Plastic Packaging & Equipment in Contact with Food
On September 28, 2023, the Southern Common Market (MERCOSUR) published Draft Resolution No. 10/23 - Modification of GMC Resolution No. 02/12 MERCOSUR Technical Regulations on the Positive List of Monomers, Other Starting Substances and Polymers Authorized for the Production of Plastic Packaging and Equipment in Contact with Food through World Trade Organization (WTO) website.
The final comments are accepted until November 27, 2023.
Official sourceSanitation
Ukraine
10/2/2023
Ukraine MOZ Publishes Draft Order on Approval of Special Requirements for Plastic Materials and Articles Intended to Come into Contact with Foodstuffs
On October 2, 2023, the Ministry of Health (MOZ) announced the publication of the draft order on approval of special requirements for plastic materials and objects intended for contact with food products.
The final date for comments and suggestions was October 12, 2023.
Official sourceSanitation
China
9/6/2023
China CFSA Announces Release of National Food Safety Standards including Food Contact Material Standards
On September 6, 2023, the China National Center for Food Safety Risk Assessment (CFSA) published an announcement on the release of 85 national food safety standards. These standards are about food safety standards including food contact materials and products, and chemicals in food contact materials and products, with different implementation dates.
Official sourceSustainability, Performance
EU
10/6/2023
European Union (EC) Releases Draft Regulating Eco-design Requirements of Industrial Fans
On October 6, 2023, the European Commission released Commission Regulation (EU) implementing Directive 2009/125/EC of the European Parliament and of the Council regarding eco-design requirements for fans driven by motors with an electric input power between 125 W and 500 kW and repealing Commission Regulation (EU) No 327/2011. Fans driven by motors are an important element of gas handling products and systems.
Comments were accepted until November 3, 2023.
Official sourceWireless
Trinidad & Tobago
9/21/2023
Trinidad and Tobago TATT Publishes 5G Public Mobile Network Framework
On September 21, 2023, the Telecommunications Authority of Trinidad and Tobago (TATT) published Framework for Fifth Generation (5G) Public Mobile Telecommunications Networks that was developed to create the regulatory environment to support the introduction and development of 5G networks in Trinidad and Tobago.
Please contact your local UL Solutions office for more information.Wireless
Indonesia
9/19/2023
Indonesia SDPPI Opens Public Consultation on the Draft Technical Standard of LTE and IMT-2020 Equipment
On September 19, 2023, the Directorate General of Postal Resources and Equipment and Informatics (SDPPI) of Indonesia released the draft decree on Technical Standards for Cellular Mobile Telecommunication Tools and/or Equipment Based on Long Term Evolution and International Mobile Telecommunications-2020 Technology.
Responses and input were submitted until October 1, 2023.
Official sourceWireless
Trinidad & Tobago
9/25/2023
Trinidad and Tobago TATT Publishes Amended Equipment Standardization and Certification Framework
On September 25, 2023, the Telecommunications Authority of Trinidad and Tobago (TATT) published Equipment Standardization and Certification Framework for the Telecommunications and Broadcasting Sectors Version 2.0.
Official sourceWireless
United Kingdom
9/27/2023
United Kingdom Ofcom Publishes Statement on the Availability of the 26 GHz and 40 GHz Bands for Mobile Technology
On September 27, 2023, the Office of Communications (Ofcom) published a statement about Enabling mmWave spectrum for new uses; Making the 26 GHz and 40 GHz bands available for mobile technology. This statement is in accordance to the consultation conducted last March 13 to May 22, regarding their decision to use a large amount of millimeter wave (mmWave) spectrum to be used for mobile technology, such as 5G.
Official sourceWireless
Singapore
9/27/2023
Singapore IMDA Opens Public Consultation on Revision of Technical Specifications for Cellular Base Station and Repeater System
On September 27, 2023, the Infocomm Media Development Authority (IMDA) of Singapore opened a public consultation on the draft Technical Specification Cellular Base Station and Repeater System (IMDA TS CBS Issue 1 Rev 3, xxx 2023).
Comments were accepted until October 11, 2023.
Official sourceWireless
Micronesia
10/26/2023
Micronesia TRA Publishes Frequency Allocation Table
On October 26, 2023, the Telecommunications Regulatory Authority (TRA) of Micronesia published the National Table of Frequency Allocations.
Official sourceWireless
Botswana
8/1/2023
Botswana BOCRA Announces Type Approval List of Exemption
On August 1, 2023, the Botswana Communications Regulatory Authority (BOCRA) issued a letter with Reference: BOCRA 1/7/13 II (8), announcing telecommunications equipment’s which are to be exempted from Type Approval.
Please contact your local UL Solutions office for more information.Wireless
Jordan
8/30/2023
Jordan TRC Updates List of Allocated Frequencies for Short Range Devices
On August 30, 2023, the Telecommunications Regulatory Commission (TRC) of Jordan released Issue 2 of the Frequency license Issued by the Authority to the Public. This document lists the frequencies allocated for the use of short-range devices (SRDs) with corresponding technical specifications reference.
Official sourceWireless
USA
9/28/2023
USA FCC Publishes Report and Order and Opened Public Consultation on Operation of Very Low Power Devices in the 6 GHz Band
On September 28, 2023, the Federal Communications Commission (FCC) of USA published a report and order and opened a public consultation on In the Matter of Unlicensed Use of the 6 GHz Band; Expanding Flexible Use in Mid-Band Spectrum Between 3.7 and 24 GHz (Second Report and Order, Second Further Notice of Proposed Rulemaking, and Memorandum Opinion and Order of Remand ET Docket No. 18-295; GN Docket No. 17-183).
For the second further notice of proposed rulemaking, comments must be submitted 30 days from the date of publication in the Federal Register publication. This is yet to be published.
Official sourceWireless
South Korea
10/4/2023
South Korea RRA Opens Public Consultation on Partial Revision of Technical Standards for Wireless Equipment for Telecommunication Business
On October 4, 2023, the South Korean National Radio Research Agency (RRA) opened a public consultation on the partial revision of Technical Standards for Wireless Equipment for Telecommunications Business under National Radio Research Institute Notice No. 2023-84.
Comments are accepted until December 4, 2023.
Official sourceWireless
China
10/13/2023
China MIIT Publishes Wireless LAN Equipment Supporting IPv6 Protocol for Testing Capability in SRRC
On October 13, 2023, the Ministry of Industry and Information Technology (MIIT) published the MIIT - Radio Committee Notice No. 174 of 2023 Notice of the Ministry of Industry and Information Technology on Matters Concerning Testing Capability of Wireless Local Area Network Equipment Supporting IPv6 Protocol in Type Approval (SRRC), which will become effective from December 1, 2023.
Official sourceWireless
Vietnam
10/10/2023
Vietnam MIC Publishes Allocation of 1920-1980 and 2110-2170 MHz Band for International Mobile Telecommunications (IMT)
On October 10, 2023, the Vietnam Ministry of Information and Communication (MIC) published 1920-1980 MHz and 2110-2170 MHz Frequency Band Planning for Vietnam's IMT Mobile Communication System (Circular No. 12/2023/TT-BTTTT).
Official sourceWireless
Turkey
10/12/2023
Turkey BTK Publishes Amended Regulation on the Register of Devices with Electronic Identification
On October 12, 2023, the Turkey's Information Technologies and Communications Authority (BTK) published Communique Register of Devices Having Electronic Identification Changes to Be Made in the Notification Regarding the Receiving Related Notification through Official Gazette Number: 32337.
Official sourceWireless
Indonesia
10/19/2023
Indonesia SDPPI Opens Public Consultation on the Draft Decree on Technical Standards for Antenna Telecommunication Equipment
On October19, 2023 Directorate General of Postal Resources and Equipment and Informatics (SDPPI) of Indonesia released Draft Decree of the Minister of Communication and Information on Technical Standards for Antenna Telecommunication Equipment. This contains the technical standards of antenna telecommunications equipment including administrative requirements that must be fulfilled in order to apply for a certificate.
Responses and input were submitted until October 30, 2023.
Official sourceWireless
Vietnam
10/23/2023
Vietnam MIC Opens Public Consultation on the Allocation of 1710-1785 and 1805-1880 MHz Bands for International Mobile Telecommunications (IMT)
On October 23, 2023, the Vietnam Ministry of Information and Communication (MIC) opened a public consultation on the draft of the Plan for the 1710-1785 MHz and 1805-1880 MHz Frequency Bands for Vietnam's IMT Mobile Communication System.
Comments are accepted until December 23, 2023.
Official sourceWireless
Mongolia
9/13/2023
Mongolia CRC Updates Allocation and Technical Requirements for Next Generation Mobile Communication Systems
On September 13, 2023, the Communications Regulatory Commission (CRC) of Mongolia published communication coordination committee decision number 106 Regarding the Update of Radio Frequency Band Allocation, Technical Conditions and Requirements for Next Generation Mobile Communication Systems.
Official sourceWireless
Bhutan
10/23/2023
Bhutan BICMA Publishes Draft Identification of the 26GHz Band for IMT Services
On October 23, 2023, the Bhutan InfoComm and Media Authority (BICMA) opened consultation on the Identification of mmWave Frequency Spectrum Band in 26GHz for International Mobile Telecommunication (IMT) Services.
Feedbacks and comments were submitted until November 6, 2023.
Official sourceWireless, EMC, Safety, Performance
India
9/27/2023
India TEC Extends Implementation of Phase-III and IV of MTCTE Scheme
On September 27, 2023, the Telecommunication Engineering Centre (TEC) of India released an amendment notification to extend the date of mandatory certification for 32 products (Essential Requirements) covered under Phase-III and IV of Mandatory Testing and Certification of Telecommunication Equipment (MTCTE) scheme by three months i.e., till January 1, 2024.
Official source- October 2023 updates
Regulation Country Published Date Summary Chemicals
Australia
8/30/2023
Australia DCCEEW Publishes Proposal on Chemical Management Standards for Four Persistent Organic Pollutants (POPs)
On Aug. 30, 2023, the Department of Climate Change, Energy, the Environment and Water (DCCEEW) published the proposed chemical management standards for four persistent organic pollutant (POPs) through World Trade Organization (WTO) website.
Australia has opened public comments on classifications of four POPs into Schedule 7 of the Industrial Chemicals Environmental Management Standard (IChEMS) Online Register, and feedbacks are accepted until Oct. 29, 2023. The feedback will help for better management of environmental risks of these chemicals.
Official sourceChemicals
EU
9/26/2023
European Union EC Publishes Regulation to Amend Regulation on Mercury-added Products Subject to Manufacturing, Import and Export Bans
On Sept. 26, 2023, the European Commission (EC) published Commission Delegated Regulation (EU) 2023/2049 of 14 July 2023 amending Regulation (EU) 2017/852 of the European Parliament and of the Council as regards mercury-added products subject to manufacturing, import and export bans.
Official sourceCyber Security
USA
8/25/2023
USA FCC Opens Public Consultation on Cybersecurity Labeling for IoT Devices
On Aug. 25, 2023, the Federal Communications Commission (FCC) of the United States of America opened a public consultation on Cybersecurity Labeling for Internet of Things.
Comments were accepted until Sept. 25, 2023.
Official sourceCyber Security
India
8/25/2023
India NCCS Announces the Start of Voluntary Security Certification for IP Router & Wi-Fi CPE
On Aug. 25, 2023, the National Centre for Communication Security (NCCS) announces the issuance of a voluntary security certification (VSC) for IP Router & Wi-Fi CPE. This voluntary certification was enforced on Sept. 1, 2023.
Official sourceCyber Security
China
8/18/2023
China MIIT Publishes Draft Guidelines for the Construction of a New Internet of Things Infrastructure Standard System
On Aug. 18, 2023, the Ministry of Industry and Information Technology (MIIT) opened a public consultation on Guidelines for the Construction of a New Internet of Things Infrastructure Standard System (2023 Edition) till Sept. 18, 2023.
Official sourceCyber Security
Indonesia
9/19/2023
Indonesia BSSN Opens Public Consultation on the Revision Draft of the Indonesian Common Criteria Certification Scheme
On Sept. 19, 2023, the National Cyber and Crypto Agency (BSSN) of Indonesia published a draft on Implementation of the Indonesian Common Criteria Certification Scheme. This revises BSSN Regulation Number 15 of 2019 concerning the Implementation of the Indonesian Common Criteria Scheme. This shall serve as guide for implementing security certification for Information Technology (IT) products according to ISO/IEC 15408 and the Common Criteria (CC) standard.
Comments are accepted until October 19, 2023.EMC
China
7/26/2023
China SAC Issues Draft EMC Emission Standard for Household Appliances, Electric Tools and Similar Apparatus
On July 26, 2023, the Standardization Administration of the P.R.C. (SAC) issued a draft mandatory national standard GB 4343.1—20XX Electromagnetic Compatibility Requirements for Household Appliances, Electric Tools and Similar Apparatus—Part 1: Emission (CISPR 14-1:2020, MOD) for public consultation until Sept. 26, 2023.
Official sourceEMC, Energy Efficiency, Performance, Safety, Wireless
Global, CB Scheme
8/14/2023
IECEE Adds New Decision Sheet Related to Batteries Product Category on Week 33
On Aug. 14, 2023, new decision sheet related to photovoltaic product category was uploaded on the IECEE website.
- DSH 2210 - Charge at upper/lower limit charging temperature without +/- 5 deg C
Official sourceEMC, Energy Efficiency, Safety
Israel
8/28/2023
Israel MEI Notifies Changes for Sections of Mandatory Standard SI 60745 Part 1 - Hand-held Motor-operated Electric Tools
On Aug. 28, 2023, the Ministry of Economy and Industry (MEI) notified changes for sections of mandatory standard SI 60745 Part 1 - Hand-held motor-operated Electric Tools - Safety General Requirements.
Official sourceEMC, Explosive Atmospheres, Safety
China
9/5/2023
China SAMR Issues Latest Compulsory Product Certification (CCC) Catalog with Description and Definition Table (Announcement No. 36 of 2023)
On Sept. 5, 2023, the State Administration of Market Regulation (SAMR) issued the revised Compulsory Product Certification Catalog of 2023 which includes the description and definition table of the 96 products in 16 categories subject to CCC certification.
Official sourceEMC, Safety
Japan
8/1/2023
Japan METI Finalizes Update on EMC and Electrical Safety Standards for Electric Appliances and Machinery
On Aug. 1, 2023, the Ministry of Economy, Trade, and Industry (METI) released the latest updates on Part of the interpretation of the ministerial ordinance that stipulates technical standards for electrical appliances (adoption of harmonized standards, etc.). The draft, which was released last June, with consultation period running until July 2023 as previously reported, is now finalized and enforced same date as its release (Aug. 1, 2023).
Standards revised/updated by this release may still be used until July 31, 2026.
Official sourceEMC, Safety
GCC
9/26/2023
GSO Informs Stakeholders about Upcoming Launch of New E-certificate Template
On Sept. 26, 2023, the GCC Standardization Organization (GSO) informed stakeholders about the upcoming launch of new e-certificates template from Oct. 1, 2023.
E-certificate is a new function of the online platform for online registration of certificates. Certificates with a common template studied by GSO will be generated by the platform on the base of the information verified and entered by the issuing Notified Body.
Official sourceEMC, Safety, Wireless
South Korea
7/11/2023
South Korea MOTIE Publishes Partial Revision of Electric Equipment Regulations
On July 11, 2023, the South Korean Ministry of Trade, Industry and Energy (MOTIE) published the partial revision of Korean Electrical Equipment Regulations (Notice No. 2023-563).
Official sourceEMC, Wireless
South Korea
8/17/2023
South Korea RRA Publishes Partial Revision of EMC Test Method
On Aug. 17, 2023, the South Korean National Radio Research Agency (RRA) published the partial revision of Electromagnetic Compatibility Test Method under National Radio Research Agency Notice No. 2023-68.
Official sourceEnergy Efficiency
Saudi Arabia
8/14/2023
Saudi Arabia SASO Notifies Stakeholders for Mandatory Energy Efficiency Label for Electric Dishwashers
On Aug. 14, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) notified stakeholders for mandatory issuance of energy efficiency label of electric dishwashers.
Official sourceEnergy Efficiency
Hong Kong
8/7/2023
Hong Kong ESMD Plans to Upgrade the Existing Energy Efficiency Grading Standards of Refrigerating Appliances, Washing Machines and Storage Type Electric Water Heaters for MEELS
On Aug. 7, 2023, the Electrical and Mechanical Services Department (ESMD) issued a consultation for the revision of the Code of Practice on Energy Labelling of Products (CoP) for the upgrading of the existing energy efficiency grading standard for refrigerating appliances, washing machines, and storage type electric water heaters under the Mandatory Energy Efficiency Labelling Scheme (MEELS). The test method and calculation of the required product's energy efficiency grading must comply with the proposed new calculation method.
Comments were sent by mail, email, or facsimile until Sept. 19, 2023.
Official sourceEnergy Efficiency
EU
8/31/2023
European Union EC Releases Energy Labeling Requirements of Smartphones and Slate Tablets
On Aug. 31, 2023, the European Commission (EC) published Commission Delegated Regulation (EU) 2023/1669 of 16 June 2023 supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council regarding the energy labelling of smartphones and slate tablets. This regulation establishes how energy information shall be reflected on devices including a guide on corresponding compliance checks.
Official sourceEnergy Efficiency
Brazil
8/9/2023
Brazil INMETRO Issues Amendment of the Consolidated Conformity Assessment Requirements for Refrigerators and Similar Products (Portaria 266/2023)
On Aug. 9, 2023, the National Institute of Metrology, Quality, and Technology (INMETRO) issued Portaria No. 266 of Aug. 1, 2023, amending the Conformity Assessment Requirements for Refrigerators and Similar Products, approved by Portaria No. 332 of Aug. 2, 2021. Portaria 266/2023 establishes a new deadline for businesses engaged in distribution or trade to exclusively sell products with the updated label, effective Sept. 1, 2023.
Official sourceEnergy Efficiency
USA
8/30/2023
USA DOE Publishes Correcting Amendments for the Test Procedure for Room Air Conditioners
On Aug. 30, 2023, the US Department of Energy (DOE) published correcting amendments for the test procedure for room air conditioners; and was enforced on Aug. 30, 2023.
Official sourceEnergy Efficiency
Brazil
8/9/2023
Brazil INMETRO Issues Rectification on the Consolidated Regulation for Microwave Ovens (Portaria 268/2021)
On Aug. 9, 2023, the National Institute of Metrology, Quality, and Technology (INMETRO) issued a rectification on the consolidated technical quality regulation and conformity assessment requirements for microwave ovens, Portaria No. 268 of June 22, 2021, published in the Official Gazette of the Union of June 25, 2021.
Official sourceEnergy Efficiency
USA
8/31/2023
USA DOE Publishes Direct Final Rule for the Energy Conservation Standards for Air Cleaners
On Aug. 31, 2023, the US Department of Energy (DOE) published a direct final rule, confirmation of effective and compliance dates regarding the energy conservation standards for air cleaners.
Official sourceEnergy Efficiency
USA
9/5/2023
USA DOE Publishes Proposed Rule for the Energy Conservation Standards for Walk-In Coolers and Freezers
On Sept. 5, 2023, the US Department of Energy (DOE) published proposed rules regarding the energy conservation standards for walk-in coolers and freezers.
DOE will accept comments, data, and information regarding this NOPR no later than Nov. 6, 2023.
Official sourceEnergy Efficiency
Israel
6/25/2023
Israel MoE Publishes Document 10687 regarding Energy Sources Regulations
On June 25, 2023, the Ministry of Energy (MoE) published document 10687 regarding energy sources regulations of 2023.
According to the Energy Sources Law, an importer or manufacturer must adhere to European import rules and regulations, including those pertaining to an energy rating label, in order to import electrical products listed in the third appendix of the law and obtain an energy permit.
Official sourceEnergy Efficiency
United Arab Emirates
9/8/2023
UAE MoIAT Circulates Draft Standard UAE.S 5010-1 for Labeling – Energy Efficiency Label for Electrical Appliances of Small Capacity Household Air Conditioners
On Sept. 8, 2023, the Ministry of Industry and Advanced Technology (MoIAT) circulated draft standard UAE.s 5010-1:20xx for labeling - energy efficiency label for electrical appliances of small capacity household air-conditioners. The current standard edition is UAE.S 5010-1:2019.
The deadline for submission of comments and feedback was until Oct. 10, 2023.
Please contact your local UL Solutions office for more information.Energy Efficiency
India
9/12/2023
India BEE Releases Advisory regarding Use of QR Code on Refrigerators Under Standards and Labelling Program
On Sept. 12, 2023, the Bureau of Energy Efficiency (BEE) published an advisory for permittees/manufacturers of refrigerators to continue their production without QR code under Standards and Labelling program.
Official sourceEnergy Efficiency
Saudi Arabia
9/18/2023
Saudi Arabia SASO Circulates Draft Standard SASO 2902:2018/AMD2:2023 - Energy Efficiency, Functionality and Labelling Requirements for Lighting Products Part 2
On Sept. 18, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) circulated a draft standard SASO 2902:2018/AMD2:2023 for energy efficiency, functionality and labelling requirements for lighting products Part 2.
Comments and feedback can be send until Nov. 17, 2023.
Official sourceEnergy Efficiency
USA
9/25/2023
USA DOE Publishes Proposed Rule for the Energy Conservation Standards for Automatic Commercial Ice Makers
On Sept. 25, 2023, the US Department of Energy (DOE) published proposed rules regarding the energy conservation standards for automatic commercial ice makers.
DOE will accept comments, data, and information regarding this NODA no later than Oct. 25, 2023.
Official sourceEnergy Efficiency
Canada
8/26/2023
Canada SCC Draft Reaffirmation of CSA C296:19 - Energy Performance of Walk-in Freezer and Walk-in Cooler Components
On Aug. 26, 2023, the Standards Council of Canada (SCC) started the review of CSA C296:19. This standard deals with the energy performance of walk-in freezer and walk-in cooler components.
Comments were accepted until Sept. 27, 2023.
Official sourceEnergy Efficiency
Serbia
8/4/2023
Serbia MRE Issues Ecodesign Requirements for Standby, Off, and Networked Standby Power Consumption of Various Equipment
On Aug. 4, 2023, the Ministry of Mining and Energy (MRE) published in the Official Gazette of RS No. 65, page 89, the regulation on the ecodesign requirements regarding standby, off, and networked standby power consumption for household electrical and electronic appliances and office equipment (65/2023-89). This regulation entered into force on Aug. 12, 2023, and will apply from March 1, 2024.
Official sourceEnergy Efficiency, Performance
Ukraine
8/31/2023
Ukraine Ministry of Infrastructure Publishes Draft Technical Regulation for Energy Labeling of Light Sources
On Aug. 31, 2023, the Ministry of Infrastructure published a draft Order on the approval of the technical regulation for energy labeling of light sources.
This draft Order aims to:
- regulate the requirements for energy labeling of light sources in accordance with the updated EU legislation; and
- provide consumers with information on the level of efficiency and energy consumption of light sources and additional information that will allow them to choose the most energy-efficient products.
Official sourceEnergy Efficiency, Performance
South Korea
9/8/2023
South Korea KEA Publishes High-efficiency Energy Equipment Certification Guidebook
On Sept. 8, 2023, the Korea Energy Agency (KEA) published High-efficiency Energy Equipment Certification Guidebook.
Official sourceEnergy Efficiency, Performance, Sustainability
EU
9/12/2023
European Union EC Harmonizes New Standards for Ecodesign and Energy Labelling of Household Dishwashers
On Sept. 12, 2023, the European Commission (EC) published Commission Implementing Decision (EU) 2023/1759 of 11 Sept. 2023 on the harmonized standards for household dishwashers drafted in support of Regulation (EU) 2019/2022 and Regulation (EU) 2019/2017. This enters into force the same day as published and repeals Implementing Decision (EU) 2021/913.
Official sourceEnergy Efficiency, Performance, Water Efficiency
Ukraine
8/8/2023
Ukraine Cabinet Ministers Publishes Resolution on the Approval of the Technical Regulation on Ecodesign Requirements for Household Washing Machines and Washer-dryers
On Aug. 8, 2023, the Cabinet Ministers of Ukraine published a resolution on the approval of the technical regulation on eco-design requirements for household washing machines and household washer-dryers.
The technical regulation in this resolution aims to:
- regulate the energy labelling of household washing machines and household washing and drying machines in accordance with the updated EU legislation; and
- provide to the consumers information on the energy efficiency class, on the level of consumption and other additional information that will enable consumers to choose the most energy-efficient products.
Official sourceEnergy Efficiency, RoHS, Safety, Chemicals
Saudi Arabia
8/31/2023
Saudi Arabia SASO Updates SABER User Guide for Issuance of Shipment Certificate of Imported Products
On Aug. 31, 2023, the Saudi Standards, Quality and Metrology Organization (SASO) updated SABER user guide for issuance of shipment certificate of imported products.
Official sourceEnergy Efficiency, Safety
Brazil
8/9/2023
Brazil INMETRO Issues Rectification of Portaria 69/2022 Consolidated Regulation for Self-Ballasted LED Lamps
On Aug. 9, 2023, the National Institute of Metrology, Quality, and Technology (INMETRO) issued a correction in item 2 of ANNEX III - Seal of Identification of Compliance in the consolidated Technical Quality Regulation and the Conformity Assessment Requirements for LED Lamps with Integrated Base Control Device (built-in ballast), Portaria No. 69 of Feb. 16, 2022, published in the Official Gazette of Feb. 25, 2022.
Official sourceEnergy Efficiency, Safety
Brazil
8/9/2023
Brazil INMETRO Adjusts Revocation of the Conformity Assessment Regulation for Ceiling Fans for Residential Use (Portaria 113/2008)
On Aug. 9, 2023, the National Institute of Metrology, Quality, and Technology (INMETRO) issued a rectification of Article 14 of the consolidated regulation for ceiling fans, Portaria No. 465, of Nov. 23, 2021, published in the Official Gazette of the Union of Nov. 25, 2021. This adjusted the validity of the INMETRO certificates of ceiling fans for residential use based on Portaria 113/2008.
Official sourceEnergy Efficiency, Safety
Brazil
8/10/2023
Brazil INMETRO Issues Rectification on Safety and Energy Efficiency Requirements of Water Heaters (Portaria 89/2022)
On Aug. 10, 2023, the National Institute of Metrology, Quality, and Technology (INMETRO) issued a rectification of Mercosur Technical Regulation for minimum safety and energy efficiency requirements of household appliances that use gas as fuel and the Conformity Assessment Requirements for Gas Water Heaters, Portaria No. 89/2022, which was published in the Brazilian Official Gazette of March 25, 2022.
Official sourceEnergy Efficiency, Safety, Performance
EU
9/15/2023
European Union CENELEC Publishes New Standard EN IEC 62220-2-1:2023 - Medical Electrical Equipment X-ray Imaging Devices
On Sept. 15, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 62220-2-1:2023 for medical electrical equipment - characteristics of digital x-ray imaging devices - determination of dual-energy subtraction efficiency - detectors used for dual-energy radiographic imaging.
Official sourceExplosive Atmospheres
Australia, New Zealand
8/25/2023
Australia & New Zealand Publish AS/NZS 60079.5:2015 Amendment 1:2023 - Equipment Protection by Powder Filling "q"
On Aug. 25, 2023, the Standards Australia and New Zealand published AS/NZS 60079.5:2015 Amendment 1:2023. This standard specifies requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex components in the type of protection powder filling “q” intended for use in explosive gas atmospheres.
Please contact your local UL Solutions office for more information.F Gas, Chemicals
USA
9/8/2023
USA EPA Publishes Protection of Stratospheric Ozone: Determination 38 for Significant New Alternatives Policy Program
On Sept. 8, 2023, the Environmental Protection Agency (EPA) published Protection of Stratospheric Ozone: Determination 38 for Significant New Alternatives Policy Program (40 CFR Part 82).
This document:
- is a Determination related to the expansion of the list of acceptable substitutes pursuant to EPA's Significant New Alternatives Policy (SNAP) program; and
- lists as acceptable additional substitutes for use in the refrigeration and air conditioning and fire suppression sectors.
Official sourceF Gas, Chemicals
Israel
9/14/2023
Israel Ministry of Environmental Protection Publishes Draft Amendment to Regulations on Hazardous Substances to Postpone HFCs Reduction Target
On Sept. 14, 2023, the Ministry of Environmental Protection published Draft Regulations on Hazardous Substances (Implementation of the Montreal Protocol on Substances that Damage the Ozone Layer) (Amendment), 2023 which will amend Hazardous Substances Regulations (Implementation of the Montreal Protocol on Substances Harmful to the Ozone Layer), 2004 to postpone the HFCs 40% reduction target to a later date than 2024.
Comments were accepted until Oct. 5, 2023.
Official sourceF Gas, Chemicals
China
9/1/2023
China MEE Publishes Announcement to Ban the Production of Insulation Pipe Products and Solar Water Heater Products Using the Blowing Agent 1,1-dichloro-1-fluoroethane (HCFC-141b)
On Sept. 1, 2023, the Ministry of Ecology and Environment (MEE) published an announcement on banning the production of insulation pipe products and solar water heater products using 1,1-dichloro-1-fluoroethane (HCFC-141b) as the blowing agent in accordance with the Regulations on Ozone-depleting Substances to implement the Montreal Protocol starting Dec. 1, 2023.
Official sourcePerformance
EU
9/1/2023
European Union CENELEC Publishes New Standard EN IEC 60793-1-44:2023 - Optical Fibers : Cut-off Wavelength
On Sept. 1, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 60793-1-44:2023 for optical fibers -measurement methods and test procedures - cut-off wavelength.
The date of withdrawal of superseded version is Aug. 28, 2026.
Official sourcePerformance
EU
9/1/2023
European Union CENELEC Publishes New Standard EN IEC 61076-3-106:2023 - 8-way Shielded and Unshielded Connectors for Electrical and Electronic Equipment
On Sept. 1, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61076-3-106:2023 for connectors for electrical and electronic equipment - product requirements - Part 3-106: rectangular connectors - detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface.
The date of withdrawal of superseded version is Aug. 23, 2026.
Official sourcePerformance
EU
9/1/2023
European Union CENELEC Publishes New Standard EN IEC 61300-2-26:2023 - Fiber Optic Interconnecting Devices and Passive Components - Salt Mist Test
On Sept. 1, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61300-2-26:2023 for fiber optic interconnecting devices and passive components - basic test and measurement procedures - salt mist test.
The date of withdrawal of superseded version is Aug. 23, 2024.
Official sourcePerformance
Canada
8/23/2023
Canada SCC Draft Reaffirmation of C656-14 (R2019) - Performance Standard for Split-system and Single-package Air Conditioners and Heat Pumps
On Aug. 23, 2023, the Standards Council of Canada (SCC) started the review of C656-14 (R2019). This standard deals with the performance standard for split-system and single-package air conditioners and heat pumps.
Comments were accepted until Sept. 20, 2023.
Official sourcePerformance
EU
9/1/2023
European Union CENELEC Publishes New Standard EN IEC 62149-3:2023 - 40-Gbit/s Fiber Optic Transmission Systems
On Sept. 1, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 62149-3:2023 for fiber optic active components and devices - performance standards - modulator-integrated laser diode transmitters for 40-Gbit/s fiber optic transmission systems.
The date of withdrawal of superseded version is Aug. 23, 2026.
Official sourcePerformance
EU
9/1/2023
European Union CENELEC Publishes Amended Standard EN IEC 62885-4:2020/A1:2023 - Cordless Dry Vacuum Cleaners for Household
On Sept. 1, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 62885-4:2020/A1:2023 for surface cleaning appliances - cordless dry vacuum cleaners for household or similar use - methods for measuring the performance.
Official sourcePerformance
EU
9/1/2023
European Union CENELEC Publishes Amended Standard EN IEC 63086-1:2020/A1:2023 - Performance of Household Electrical Air Cleaning Appliances
On Sept. 1, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 63086-1:2020/A1:2023 for general requirements of household and similar electrical air cleaning appliances - methods for measuring the performance.
Official sourcePerformance
EU
9/15/2023
European Union CENELEC Publishes New Standard EN IEC 61300-2-38:2023 - Fiber Optic Sealed Closures and Hardened Connectors using Air Pressure
On Sept. 15, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61300-2-38:2023 for fiber optic interconnecting devices and passive components - basic test and measurement procedures - tests sealing for fiber optic sealed closures and hardened connectors using air pressure.
The date of withdrawal of superseded version is Sept. 1, 2024.
Official sourcePerformance
EU
9/15/2023
European Union CENELEC Publishes New Standard EN IEC 60317-89:2023 - Polyesterimide Enamelled Round Aluminum Wire, Class 200
On Sept. 15, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 60317-89:2023 for specifications for particular types of winding wires - polyesterimide enameled round aluminum wire, class 200.
Official sourcePerformance, Safety
Australia, New Zealand
9/1/2023
Australia & New Zealand Prepare Draft DR AS/NZS 62722.2.1:2023 - Performance Requirements for LED Luminaires
On Sept. 1, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 62722.2.1:2023. This standard specifies performance requirements for LED luminaires, together with the test methods and conditions.
The closing date for comments is Oct. 12, 2023.
Official sourcePerformance, Safety
Global, CB Scheme
8/14/2023
IECEE Adds New Decision Sheet Related to POW Low Voltage, High Power Switching Equipment) Category on Week 33
On Aug. 14, 2023, new decision sheet related to POW (low voltage, high power switching equipment) product category was uploaded on the IECEE website.
- DSH 2202 - IP3X/IP4X, Ingress of Foreign Bodies
Official sourcePerformance, Sustainability
EU
8/31/2023
European Union EC Releases Eco-design Requirements for Smartphones and Mobile Phones
On Aug. 31, 2023, the European Commission published Commission Regulation (EU) 2023/1670 of 16 June 2023 laying down eco-design requirements for smartphones, mobile phones other than smartphones, cordless phones and slate tablets pursuant to Directive 2009/125/EC of the European Parliament and of the Council and amending Commission Regulation (EU) 2023/826. This regulation establishes resource efficiency requirements and ensures repairability for consumers among other provisions.
Official sourcePerformance, Sustainability, Energy Efficiency
EU
9/21/2023
European Union EC Reviews the Ecodesign Requirements for Solid-fuel Local Space Heaters
On Sept. 21, 2023, the European Commission (EC) opened initiatives to review the eco-design requirements for solid-fuel local space heaters. This should tackle material efficiency issues such as durability, reparability, and recyclability.
Comments are accepted until Dec. 14, 2023.
Official sourceSafety
Uganda
8/28/2023
Uganda UNBS Prepares Draft Standard DUS 2580: 2022 - Requirements for On-Line Monitoring Control and Validation Systems of Gaming Equipment
On Aug. 28, 2023, the Uganda National Bureau of Standards (UNBS) prepared draft standard DUS 2580:2022. This standard provides requirements for online monitoring and control systems (MCS) and validation system.
Any comments on this draft standard can be sent to the following details of UNBS until Oct. 27, 2023.
Official sourceSafety
India
8/3/2023
India DGFT Restricts Importation of Laptops, Tablets, Personal Computers & Similar Products
On Aug. 3, 2023, the Directorate General of Foreign Trade (DGFT) published Notification No. 23/2023 and restricted the import of laptops, tablets, all-in-one personal computers, and ultra small form factor computers and servers falling under HSN 8741. The import of these products would be allowed against a valid license for restricted imports.
As per subsequent amendment notification issued on Aug. 4, 2023, effective date for the restricted import notification will be Nov. 1, 2023.
Official sourceSafety
United Kingdom
8/2/2023
United Kingdom Department for Business & Trade Announces to Modernize Product Safety Laws
On Aug. 2, 2023, the UK Government Department of Business and Trade announced that they are to overhaul the UK’s product safety laws which are over 30 years old in a bid to make them fit for emerging technologies and digital age.
Official sourceSafety
Thailand
6/27/2023
Thailand Ministry of Industry Publishes Draft Amendment of Ministerial Regulation regarding Electrical Switches
On June 27, 2023, the Ministry of Industry published a draft amendment of Ministerial Regulation Stipulating Industrial products for Electrical Switches for Household and Similar Fixed Electrical Installations: General Requirements. The products covered by this draft must comply with the standards TIS 824 Part 1-2564.
Official sourceSafety
United Kingdom
8/2/2023
United Kingdom Department for Business & Trade Opens Consultation regarding Smarter Regulation: The Product Safety Review
On Aug. 2, 2023, the UK Government Department of Business and Trade opened a consultation regarding the smarter regulation, the product safety review.
The consultation on these proposals is now open and will close on the Oct. 24, 2023.
Official sourceSafety
Brazil
8/9/2023
Brazil INMETRO Issues Rectification on the Consolidated Conformity Assessment Requirements for Plug and Socket Adapters (Portaria No. 9/2022)
On Aug. 9, 2023, the National Institute of Metrology, Quality, and Technology (INMETRO) issued a correction to the consolidated Conformity Assessment Requirements for Plug and Socket Adapters, Portaria No. 9 of Jan. 17, 2022, published in the Official Gazette of Jan. 19, 2022.
Official sourceSafety
Thailand
8/30/2023
Thailand TISI Issues Notification regarding Addition of 7 Electrical Appliances as Controlled Products by 2024-2025
On Aug. 30, 2023, the Thai Industrial Standards Institute (TISI) announced the addition of 7 electrical appliances as controlled products by 2024-2025.
Official sourceSafety
USA
8/21/2023
USA DOE Publishes Proposed Rule for the Trade Regulation Rule Relating to Power Output Claims for Amplifiers Utilized in Home Entertainment Products
On Aug. 21, 2023, the US Department of Energy (DOE) published proposed rules regarding the trade regulation rule relating to power output claims for amplifiers utilized in home entertainment products.
Written comments must be received on or before Oct. 20, 2023. Parties interested in an opportunity to present views orally should submit a request to do so as explained below, and such requests must be received on or before Oct. 20, 2023.
Official sourceSafety
EU
9/1/2023
European Union CENELEC Publishes New Standard HD 60364-4-43:2023 - Low-voltage Electrical Installations - Protection Against Overcurrent
On Sept. 1, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard HD 60364-4-43:2023 for low-voltage electrical installations - protection for safety - protection against overcurrent.
The date of withdrawal of superseded version is Aug. 23, 2026.
Official sourceSafety
Australia
8/30/2023
Australia EESS Publishes Information Bulletin for Correct Standard to Apply for Power Supplies and Battery Chargers
Australian state regulators published an information bulletin to clarify the correct relevant standard to be applied to power supplies and battery chargers based on definition and relevant standards listed in AS/NZS 4417.2.
This published guideline was enforced on Aug. 30, 2023.
Official sourceSafety
Canada
8/22/2023
Canada SCC Publishes Draft New Edition of CAN/ULC-S646 - Standard for Exhaust Hoods and Related Controls for Commercial and Institutional Cooking Equipment
On Aug. 22, 2023, the Standards Council of Canada (SCC) published a new edition of CAN/ULC-S646. This standard deals with exhaust hoods and related controls for commercial and institutional cooking equipment.
Comments were accepted until Sept. 20, 2023.
Official sourceSafety
Brazil
8/9/2023
Brazil INMETRO Issues Rectification on the Consolidated Regulations for Wires, Cables and Flexible Electric Cords (Portaria 131/2022)
On Aug. 9, 2023, the National Institute of Metrology, Quality, and Technology (INMETRO) issued a rectification on the consolidated Technical Quality Regulation and Conformity Assessment Requirements for electrical wires, cables, and flexible cords, Portaria no. 131 of March 23, 2022, published in the Official Gazette of the Union of March 29, 2022.
Official sourceSafety
Global
8/24/2023
IEC Publishes New Standard IEC 62271-202:2022/COR1:2023 - AC Prefabricated Substations for Rated Voltages Above 1 kV and up to and Including 52 kV
On Aug. 24, 2023, the International Electrotechnical Commission (IEC) released IEC 62271-202:2022/COR1:2023. This standard deals with high-voltage switchgear and control gear particular for AC prefabricated substations for rated voltages above 1 kV and up to and including 52 kV.
Official sourceSafety
Brazil
8/9/2023
Brazil INMETRO Issues Rectification on the Consolidated Conformity Assessment Requirements for Household and Similar Appliances (Portaria 148/2022)
On Aug. 9, 2023, the National Institute of Metrology, Quality, and Technology (INMETRO) issued a rectification on the consolidated regulation for the conformity assessment requirements for household and similar appliances, Portaria No. 148 of March 28, 2022, published in the Official Gazette of the Union of March 31, 2022.
Official sourceSafety
Ghana
8/31/2023
Ghana GSA Publishes Procedure for Clearance of Electrical Cables
On Aug. 31, 2023, the Ghana Standards Authority (GSA) published procedure for the clearance of electrical cables.
Official sourceSafety
Brazil
8/9/2023
Brazil INMETRO Issues Rectification on the Consolidated Conformity Assessment Requirements for Air Conditioners (Portaria 269/2021)
On Aug. 9, 2023, the National Institute of Metrology, Quality, and Technology (INMETRO) issued a rectification of Annex I of the consolidated conformity assessment requirements for air conditioners, Portaria No. 269, of June 22, 2021, published in the Official Gazette of June 25, 2021.
Official sourceSafety
India
7/27/2023
India MNRE Extends Self Certification for Solar Photovoltaics (SPV) Inverters
On July 27, 2023, the Ministry of New and Renewable Energy (MNRE) released a gazette notification related to further extension of self-certification for solar photovoltaics (SPV) inverters under MNRE Quality Control Order 2017. New extension is up to Dec. 31, 2023, or till further orders, whichever is earlier.
Official sourceSafety
Israel
9/4/2023
Israel SII Prepares Draft Standard SI 62040 Part 1 Amendment 1 - Uninterruptible Power Systems : Safety Requirements
On Sept. 4, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 62040 Part 1 Amendment Number 1 for Uninterruptible Power Systems (UPS) : Safety Requirements.
Comments and feedbacks were accepted until Sept. 25, 2023.
Official sourceSafety
Global
9/4/2023
IEC Publishes New Standard IEC 61800-5-1/COR1:2023 - Safety Requirements for Adjustable Speed Electrical Power Drive Systems
On Sept. 4, 2023, the International Electrotechnical Commission (IEC) released IEC 61800-5-1/COR1:2023. This standard specifies requirements for adjustable speed electrical power drive systems (PDS) or their elements, with respect to electrical, thermal, fire, mechanical, energy and other relevant hazards.
Official sourceSafety
Global, CB Scheme
8/14/2023
IECEE Adds New Decision Sheets Related to Cable Category on Week 33
On Aug. 14, 2023, new decision sheets related to cable product category were uploaded on the IECEE website.
- DSH 2205 - Samples election and requirement when testing of charging cables for electric vehicles
- DSH 2206 - Samples selection and requirement when testing of electric cables for photovoltaic systems
- DSH 2207 - Samples selection and requirement when testing of halogen-free, low smoke, thermoplastic insulated and sheathed cables
Official sourceSafety
Global, CB Scheme
8/14/2023
IECEE Adds New Decision Sheet Related to Photovoltaic Category on Week 33
On Aug. 14, 2023, new decision sheet related to photovoltaic product category was uploaded on the IECEE website.
- DSH 2196 - Distance Measurement for RTV Silicone Adhesive as Insulation Material between PV Module Back Sheet and Junction Box
Official sourceSafety
Global
9/6/2023
IEC Publishes New Standard IEC 61558-2-3:2023/COR1:2023 -
Requirements and Tests for Ignition Transformers for Gas and Oil Burners
On Sept. 6, 2023, the International Electrotechnical Commission (IEC) released IEC 61558-2-3:2023/COR1:2023. This standard deals with the requirements and tests for ignition transformers for gas and oil burners.
Official sourceSafety
Global
9/6/2023
IEC Publishes New Standard IEC 61558-2-16:2021/COR1:2023 - Requirements and Tests for Switch Mode Power Supply Units and Transformers for Switch Mode Power Supply Units
On Sept. 6, 2023, the International Electrotechnical Commission (IEC) released IEC 61558-2-16:2021/COR1:2023. This standard deals with the requirements and tests for switch mode power supply units and transformers for switch mode power supply units for general applications.
Official sourceSafety
EU
9/8/2023
European Union CENELEC Publishes Amended Standard EN 60670-23:2008/A1:2023 - Floor Boxes and Enclosures
On Sept. 8, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60670-23:2008/A1:2023 for boxes and enclosures for electrical accessories for household and similar fixed electrical installations - particular requirements for floor boxes and enclosures.
Official sourceSafety
Canada
8/26/2023
Canada SCC Publishes Draft Amendment of CSA C22.2 NO. 60335-2-23:21 - Requirements for Appliances for Skin or Hair Care
On Aug. 26, 2023, the Standards Council of Canada (SCC) published an amendment revision for the standard CSA C22.2 NO. 60335-2-23:21. This standard deals with the requirements for appliances for skin or hair care.
Comments were accepted until Sept. 27, 2023.
Official sourceSafety
EU
9/8/2023
European Union CENELEC Publishes Amended Standard EN 60670-23:2008/A11:2023 - Floor Boxes and Enclosures
On Sept. 8, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60670-23:2008/A11:2023 for boxes and enclosures for electrical accessories for household and similar fixed electrical installations - particular requirements for floor boxes and enclosures.
Official sourceSafety
Global, CB Scheme
8/14/2023
IECEE Adds New Decision Sheet Applicable to All Category on Week 33
On Aug. 14, 2023, new decision sheet related to photovoltaic product category was uploaded on the IECEE website.
- DSH 2195 - OD-5013: Clarification Calibration of Leakage (Touch) Current Measuring Device with Integral Meter
Official sourceSafety
Singapore
9/7/2023
Singapore CPSO Announces Requirements Under IEC 62368-1 for AC Adaptors that can Deliver more than 100W of Power to Connected Equipment
On Sept. 7, 2023, the Enterprise Singapore CPSO published a circular (Reference No: CPSO-070923-11) on certification requirements under IEC 62368-1 for AC adaptors that can deliver more than 100W of power to connected equipment.
Official sourceSafety
Canada
8/26/2023
Canada SCC Publishes Draft Amendment Revisions for Various Electric Motor-operated Hand-held Tools, Transportable Tools and Lawn and Garden Machinery
On Aug. 26 & 28, 2023, the Standards Council of Canada (SCC) published amendment revisions for the following standards.
- CSA C22.2 NO. 62841-4-2:19
- CSA C22.2 NO. 62841-3-12:19
- CSA C22.2 NO. 62841-4-4:21
Comments were accepted until Sept. 27, 2023.
Official sourceSafety
Uruguay
9/8/2023
Uruguay UNIT Publishes Draft Standard PU UNIT-IEC 60335-2-24:2020 - Safety - Part 2-24: Particular Requirements for Refrigerating Appliances, Ice Cream Appliances and Icemakers
On Sept. 8, 2023, the Uruguayan Institute of Technical Standards (UNIT) published draft standard PU UNIT-IEC 60335-2-24:2020. This draft standard deals with safety particular requirements for refrigerating appliances, ice cream appliances and ice-makers.
Feedbacks and comments were accepted until Oct. 8, 2023.
Official sourceSafety
Canada
8/26/2023
Canada SCC Publishes Draft New Edition of CSA E60730-2-15 - Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls
On Aug. 26, 2023, the Standards Council of Canada (SCC) published new edition of CSA E60730-2-15. This standard deals with the requirements for automatic electrical air flow, water flow and water level sensing controls.
Comments were accepted until Sept. 27, 2023.
Official sourceSafety
EU
9/11/2023
European Union EC Updates Standard References for USB Connectors on RED
On Sept. 11, 2023, the European Commission (EC) published Commission Delegated Regulation (EU) 2023/1717 of 27 June 2023 amending Directive 2014/53/EU of the European Parliament and of the Council as regards the technical specifications for the charging receptacle and charging communication protocol for all the categories or classes of radio equipment capable of being recharged by means of wired charging. This amendment updates the references on the specifications relating to charging capabilities.
Official sourceSafety
India
9/6/2023
India MHI Revises Safety Compliance Requirements for EV & EV Battery for Incentive Payouts
On Sept. 6, 2023, the Ministry of Heavy Industries (MHI) published Notification No. 01(02)/2022-AEI(25055) and revised the testing parameters for safety compliance requirements for electric vehicles and battery for claiming of incentive schemes' payouts.
Official sourceSafety
Global
9/12/2023
IEC Publishes New Standard IEC 61730-2:2023 - Requirements for Testing of Photovoltaic (PV) Module
On Sept. 12, 2023, the International Electrotechnical Commission (IEC) released IEC 61730-2:2023. This standard deals with the requirements for testing of photovoltaic (PV) module.
Official sourceSafety
Canada
9/3/2023
Canada SCC Publishes Draft New Edition of CSA C22.2 NO. 60335-2-24:22 - Requirements for Refrigerating Appliances, Ice-cream Appliances and Ice-makers
On Sept. 3, 2023, the Standards Council of Canada (SCC) published draft new edition of CSA C22.2 NO. 60335-2-24:22. This standard deals with the requirements for refrigerating appliances, ice-cream appliances and ice-makers.
Comments were accepted until Oct. 6, 2023.
Official sourceSafety
Switzerland
9/11/2023
Switzerland FOPH Releases Draft Ordinance for Electronic Cigarettes
On Sept. 11, 2023, the Federal Council of Switzerland, thru the Federal Office of Public Health released Draft Ordinance on Tobacco Products and Electronic Cigarettes (OPTab). This ordinance is the establishment of the obligations of companies with particulars on the duty of self-control and declaration of products including conformance and labeling.
Comments are accepted until Nov. 10, 2023.
Official sourceSafety
Global
9/13/2023
IEC Publishes New Standard IEC 61730-1:2023 - Requirements for Construction for Photovoltaic (PV) Module
On Sept. 13, 2023, the International Electrotechnical Commission (IEC) released IEC 61730-1:2023. This standard deals with the requirements for construction of Photovoltaic (PV) module.
Official sourceSafety
Israel
9/13/2023
Israel SII Prepares Draft Standard SI 60335 Part 2.40 - Safety of Household Electrical Heat Pumps, Air-conditioners and Dehumidifiers
On Sept. 13, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 60335 Part 2.40 for household and similar electrical appliances - safety particular requirements for electrical heat pumps, air-conditioners and dehumidifiers.
Comments and feedbacks are accepted until Oct. 28, 2023.
Official sourceSafety
Australia, New Zealand
9/8/2023
Australia & New Zealand Publish AS/NZS IEC 60825.4:2023 - Safety Requirements for Laser Guards
On Sept. 8, 2023, the Standards Australia and New Zealand published AS/NZS IEC 60825.4:2023. This standard deals with the safety requirements for laser guards, permanent and temporary (for example for service), that enclose the process zone of a laser processing machine, and specifications for proprietary laser guards.
Official sourceSafety
Malaysia
9/1/2023
Malaysia DSM Opens Public Consultation of the Draft Malaysian Standards for Circuit Breakers and Protection Devices
On Sept. 1, 2023, the Department of Standards Malaysia (DSM) issued the following drafts Malaysian Standards for overcurrent protection devices for public consultation:
- DMS IEC 60898-1 - Electrical Accessories - Circuit-breakers for Overcurrent Protection for Household and Similar Installations - Part 1: Circuit-breakers for AC Operation (IEC 60898-1:2015+AMD1:2019 CSV, IDT)
- DMS IEC 60898-2 - Electrical Accessories - Circuit-breakers for Overcurrent Protection for Household and Similar Installations - Part 2: Circuit-breakers for AC and DC Operation (IEC 60898-2:2016, IDT)
- DMS IEC 60898-3 - Electrical accessories - Circuit-breakers for Overcurrent Protection for Household and Similar Installations - Part 3: Circuit-breakers for DC Operation (IEC 60898-3:2019/AMD1:2022 CSV, IDT)
- DMS IEC 62606 - General Requirements for Arc Fault Detection and Protection Devices (AFDDs) (IEC 62606:2013+AMD1:2017+AMD2:2022 CSV, IDT)
Comments can be submitted using the F2 - Public comment form from the consultation documents until Oct. 31, 2023.
Official sourceSafety
Israel
9/18/2023
Israel MEI Notifies Changes in Standard SI 32 Part 1.1 Amendment 3 - Plugs and Socket-outlets for Household and Similar Purposes
On Sept. 18, 2023, the Ministry of Economy and Industry (MEI) notified changes in standard SI 32 part 1.1 amendment number 3 regarding plugs and socket-houses for household use and similar uses : plugs and sockets for a current not greater than 16 amperes.
Comments and feedbacks can be submitted until Oct. 18, 2023.
Official sourceSafety
EU
9/15/2023
European Union CENELEC Publishes Corrigendum Standard EN IEC 62271-202:2022/AC:2023-09 - High-voltage Switchgear and Controlgear for AC Prefabricated Substations
On Sept. 15, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard EN IEC 62271-202:2022/AC:2023-09 for high-voltage switchgear and control gear - AC prefabricated substations for rated voltages above 1 kV and up to and including 52 kV.
Official sourceSafety
Global
9/15/2023
IEC Publishes New Standard IEC 63145-10:2023 - Specifications of Eyewear Display
On Sept. 15, 2023, the International Electrotechnical Commission (IEC) released IEC 63145-10:2023. This standard deals with specifications of eyewear display.
Official sourceSafety
Global
9/19/2023
IEC Publishes New Standard IEC 60794-1-306:2023 - Cable Element Test Methods of Optical Fiber Cables
On Sept. 19, 2023, the International Electrotechnical Commission (IEC) released IEC 60794-1-306:2023. This standard deals with cable element test methods, ribbon torsion, method G6 of optical fiber cables.
Official sourceSafety
Global
9/19/2023
IEC Publishes New Standard IEC 60794-1-111:2023 - Mechanical Tests Methods - Bend, Method E11 of Optical Fiber Cables
On Sept. 19, 2023, the International Electrotechnical Commission (IEC) released IEC 60794-1-111:2023. This standard deals with mechanical tests methods - bend, method E11 of optical fiber cables.
Official sourceSafety
Global, CB Scheme
9/15/2023
IECEE Adds New Test Report Forms (TRFs) on Week 37
On Sept. 15, 2023, news TRFs were published and added on the IECEE website.
Official sourceSafety
Australia, New Zealand
9/8/2023
Australia & New Zealand Publish AS/NZS IEC 60825.12:2023 - Safety Requirements of Free Space Optical Communication Systems
On Sept. 8, 2023, the Standards Australia and New Zealand published AS/NZS IEC 60825.12:2023. This standard provides safety requirements and guidance for the design, manufacture and use of laser products or laser systems which emit laser radiation for the purpose of free space optical data transmission.
Official sourceSafety
Global
9/19/2023
IEC Publishes New Standard IEC 63356-1:2023 - Data Sheets for LED Light Source Characteristics
On Sept. 19, 2023, the International Electrotechnical Commission (IEC) released IEC 63356-1:2023. This standard specifies data sheets of LED light source.
Official sourceSafety
USA
9/21/2023
USA CPSC Published Direct Final Rule for the Safety Standard for Button Cell or Coin Batteries and Consumer Products Containing such Batteries
On Sept. 21, 2023, the US Consumer Product Safety Commission (CPSC or Commission) published a direct final rule regarding the safety standard for button cell or coin batteries and consumer products containing such batteries.
Consumer products subject to performance and labeling requirements in this direct final rule must be tested and certified as compliant with the direct final rule.
Official sourceSafety
Global
9/20/2023
IEC Publishes New Standard IEC 61010-2-030:2023 - Requirements for Equipment Having Testing or Measuring Circuits
On Sept. 20, 2023, the International Electrotechnical Commission (IEC) released IEC 61010-2-030:2023. This standard deals with the requirements for equipment having testing or measuring circuits.
Official sourceSafety
Global
9/20/2023
IEC Publishes New Standard IEC 61010-2-033:2023 - Requirements for Hand-held Multimeters and other Meters for Domestic and Professional Use, Capable of Measuring Mains Voltage
On Sept. 20, 2023, the International Electrotechnical Commission (IEC) released IEC 61010-2-033:2023. This standard specifies the requirements for hand-held multimeters and other meters for domestic and professional use, capable of measuring mains voltage.
Official sourceSafety
Global
9/20/2023
IEC Publishes New Standard IEC 61010-2-032:2023 - Requirements for Hand-held and Hand-manipulated Current Sensors for Electrical Test and Measurement
On Sept. 20, 2023, the International Electrotechnical Commission (IEC) released IEC 61010-2-032:2023. This standard deals with the requirements for hand-held and hand-manipulated current sensors for electrical test and measurement.
Official sourceSafety
Global, CB Scheme
9/19/2023
IECEE Adds New Equipment List on Week 38
On Sept. 19, 2023, the testing equipment list was published
and replaced on the IECEE website.
Official sourceSafety
Turkey
8/16/2023
Türkiye MoT Publishes Regulation on Technical Regulations in Foreign Trade
On Aug. 16, 2023. The Ministry of Trade (MoT) issued Regulation on Technical Regulations in Foreign Trade to ensure that the products subject to foreign trade are safe and comply with the relevant technical regulations.
This Regulation will determine the procedures and principles for adapting and implementing relevant technical regulations, carrying out or having inspections carried out in imports and exports, determining the organizations that will carry out inspections, and preventing the import and export of noncompliant products. This Regulation entered into force on the date of its publication.
Official sourceSafety
Colombia
9/11/2023
Colombia Ministry of Mines & Energy Publishes Draft Technical Regulation update for RETILAP - Lighting and Public Lighting
On Sept. 11, 2023, the Ministry of Mines and Energy of Colombia published a draft resolution by which the technical regulation of lighting and public lighting RETILAP is modified.
Official sourceSafety
Indonesia
8/24/2023
Indonesia MOI Publishes New Regulations on Designation of Certification and Testing Organization
On Aug. 24, 2023, the Indonesia Ministry of Industry (MOI) published MOI Regulation No. 19 of 2023 and Decree No. 4057 of 2023. MOI Regulation No. 19 of 2023 is related to revocation of all previous regulations regarding certification body (LSPro) and testing laboratories designation. MOI Decree No. 4057 is a new regulation of certification body (LSPro) and testing laboratories designation for mandatory SNI under MOI.
Official sourceSafety, Chemicals
Israel
9/4/2023
Israel MEI Publishes Draft to Update the Import Group of SI 62133 Parts 1 and 2 for Rechargeable Cells and Batteries
On Sept. 4, 2023, the Ministry of Economy and Industry (MEI) published draft order to update the import groups of SI 62133 Parts 1 and 2 Nickel and Lithium Systems Rechargeable Cells and Batteries.
Comments and feedbacks were submitted until Sept. 11, 2023.
Official sourceSafety, Chemicals
Australia
9/11/2023
Australia TGA Publishes Public Consultation on Proposed Reforms to the Regulation of Nicotine Vaping Products
On Sept. 11, 2023, the Australia Therapeutic Goods Administration (TGA) published a public consultation regarding the proposal on potential reforms to the regulation of nicotine vapes. The scope of the proposed reforms has expanded to cover all vapes, including electronic non-nicotine delivery systems (ENNDs).
This public consultation was closed on Sept. 21, 2023.
Official sourceSafety, EMC
Uganda
8/28/2023
Uganda UNBS Prepared Draft Standard DUS 2657:2022 - Requirements for Electronic Raffle System
On Aug. 28, 2023, the Uganda National Bureau of Standards (UNBS) prepared draft standard DUS 2657:2022. This standard provides requirements for electronic raffle system.
Any comments on this draft standard can be sent until Oct. 27, 2023.
Official sourceSafety, Noise, Performance
South Korea
8/31/2023
South Korea, KC Safety - KATS Opens Public Consultation on Withdrawal of 227 Electrical Appliance Safety Standards
On Aug. 31, 2023, the South Korean Agency for Technology and Standards (KATS) opened a public consultation under Notice No. 2023-248 on the withdrawal of 227 electrical appliance safety standards.
Comments were accepted until Sept. 20, 2023.
Official sourceSafety, Performance
Saudi Arabia
8/25/2023
Saudi Arabia SASO Adopts Standards from International Electrotechnical Commission (IEC) for Low-voltage Switchgear and Controlgear, Heating Cables and Luminaires
On Aug. 25, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) adopted standards from International Electrotechnical Commission (IEC) for low-voltage switchgear and control gear assemblies, heating cables, general requirements for luminaire performance and lighting chains luminaires as voluntary standards.
Official sourceSafety, Performance
Global
8/31/2023
IEC Publishes New Standard IEC 60601-2-76:2018+AMD1:2023 - Requirements for the Basic Safety and Essential Performance of Low Energy Ionized Gas Haemostasis Equipment
On Aug. 31, 2023, the International Electrotechnical Commission (IEC) released IEC 60601-2-76:2018+AMD1:2023. This standard deals with the requirements for basic safety and essential performance of low energy ionized gas haemostasias equipment.
Official sourceSafety, Performance
China
9/4/2023
China MIIT and SAMR Publish First Batch Catalogue of Power Batteries for the New Energy Vehicle for the Voluntary Echelon Utilization of Product Certification
On Sept. 4, 2023, the Ministry of Industry and Information Technology (MIIT) and the State Administration for Market Regulation (SAMR) published a joint announcement to release the catalogue of the voluntary echelon utilization of product certification for power batteries of the new energy vehicle (First Batch) and the membership list of the Technical Committee.
Official sourceSafety, Performance
United Arab Emirates
8/25/2023
UAE MoIAT Publishes New Cabinet Resolution No. 90 of 2023 - Technical Regulation for Mandatory Requirement for Medical and Laboratory Measuring Instruments
On Aug. 25, 2023, the Ministry of Industry and Advanced Technology (MoIAT) published Cabinet Resolution Number 90 of 2023 related to technical regulations for mandatory requirements for medical and laboratory measuring instrument.
The technical regulation contains the scope of the regulation, the
responsibilities of the local manufacturer or supplier and end user of the medical and laboratory instrument, and the mandatory requirements.
Please contact your local UL Solutions office for more information.Safety, Performance
Saudi Arabia
8/25/2023
Saudi Arabia SASO Publishes List of Standards from International Electrotechnical Commission (IEC) for Low-voltage Switchgear and Control gear, Heating Cables and Luminaires
On Aug. 25, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) published a list of standards from International Electrotechnical Commission (IEC) for low-voltage switchgear and control gear assemblies, heating cables, general requirements for luminaire performance and lighting chains luminaires as voluntary standards.
Official sourceSafety, Performance
Saudi Arabia
9/18/2023
Saudi Arabia SASO Prepares Draft Standard SASO/DS/IEC 60095-1:2019/AMD1:2023 - Lead-acid Starter Batteries
On Sept. 18, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) prepared draft standard SASO/DS/IEC 60095-1:2019/AMD1:2023 for lead-acid starter batteries - general requirements and methods of test.
Comments and feedbacks can be submitted until Nov. 17, 2023.
Official sourceSafety, Performance
Israel
9/20/2023
Israel SII Prepares Draft Standard SI 60601 Part 1 - Medical Electrical Equipment
On Sept. 20, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 60601 Part 1 for medical electrical equipment - general requirements for basic safety and essential performance.
Comments and feedbacks can be submitted until Nov. 19, 2023.
Official sourceSafety, Performance
Global, CB Scheme
9/22/2023
IECEE Adds New Test Report Forms (TRFs) on Week 38
On Sept. 22, 2023, new TRFs were published and added on the IECEE website.
Official sourceSafety, Performance, Explosive Atmospheres, RoHS, EMC, Chemicals
EU
8/2/2023
European Union EC Updates Machinery Directive with New Harmonized Standards
On Aug. 2, 2023, the European Commission (EC) updated the Machinery Directive with new harmonized standards. Official Journal L 194/45, Commission Implementing Decision (EU) 2023/1586 of 26 July 2023 on harmonized standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council, was released.
Official sourceSanitation
Turkey
8/29/2023
Turkey Ministry of Agriculture and Forestry Publishes Draft Communiqué on Amending the Communiqué on Plastic Materials and Articles in Contact with Food
On Aug. 29, 2023, the Ministry of Agriculture and Forestry published a draft legislation amending the Turkish Food Codex Communiqué on Plastic Materials and Articles in Contact with Food in line with the amendments 2020/1245/EU and 2023/1442/EU of the Commission Regulation (EU) No 10/2011 of 14 Jan. 2011 on plastic materials and articles intended to come into contact with food.
Public consultation will run until Oct. 31, 2023.
Official sourceSanitation
Ukraine
9/6/2023
Ukraine Ministry of Agrarian Policy and Food Publishes Draft Order on Approval Requirements for Written Declaration of the Conformity of Materials and Articles Intended to Come into Contact with Food
On Sept. 6, 2023, the Ministry of Agrarian Policy and Food of Ukraine published a draft order on approval of the requirements for a written declaration of the conformity of materials and articles intended to come into contact with food and a list of documents confirming the information specified in the declaration.
Suggestions and comments are accepted until Nov. 25, 2023.
Official sourceSanitation
EU
9/27/2023
European Union EC Publishes Draft Regulation on Conformity Assessment Procedures for Products that Come into Contact with Water Intended for Human Consumption
On Sept. 27, 2023, the European Commission (EC) published Draft Commission Delegated Regulation supplementing Directive (EU) 2020/2184 of the European Parliament and of the Council by laying down conformity assessment procedures for products that come into contact with water intended for human consumption and the rules for the designation of conformity assessment bodies involved in those procedures through World Trade Organization (WTO) website.
The final date for comments is Nov. 26, 2023.
Official sourceSanitation
EU
9/27/2023
European Union EC Publishes Draft Regulation on Harmonized Specifications for the Marking of Products that Come into Contact with Water Intended for Human Consumption
On Sept. 27, 2023, the European Commission (EC) published Draft Commission Delegated Regulation supplementing Directive (EU) 2020/2184 of the European Parliament and of the Council by establishing harmonized specifications for the marking of products that come into contact with water intended for human consumption through World Trade Organization (WTO) website.
The final date for comments is Nov. 26, 2023.
Official sourceSanitation
EU
9/27/2023
European Union EC Publishes Draft Regulation on Procedure of Inclusion In or Removal from the European Positive Lists of Starting Substances, Compositions and Constituents
On Sept. 27, 2023, the European Commission (EC) published Draft Commission Delegated Regulation supplementing Directive (EU) 2020/2184 of the European Parliament and of the Council by laying down the procedure regarding inclusion in or removal from the European positive lists of starting substances, compositions and constituents through World Trade Organization (WTO) website.
The final date for comments is Nov. 26, 2023.
Official sourceSanitation
EU
9/27/2023
European Union EC Publishes Draft Decision on Procedures and Methods for Testing and Accepting Final Materials Used in Products that Come into Contact with Water Intended for Human Consumption
On Sept. 27, 2023, the European Commission (EC) published Draft Commission Implementing Decision laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards the procedures and methods for testing and accepting final materials as used in products that come into contact with water intended for human consumption through World Trade Organization (WTO) website.
The final date for comments is Nov. 26, 2023.
Official sourceSanitation
EU
9/27/2023
European Union EC Publishes Draft Decision on Methodologies for Testing and Accepting Starting Substances, Compositions and Constituents to be Included in the European Positive List
On Sept. 27, 2023, the European Commission (EC) published Draft Commission Implementing Decision laying down rules for the application of Directive (EU) 2020/2184 of the European Parliament and of the Council as regards methodologies for testing and accepting starting substances, compositions and constituents to be included in the European positive list through World Trade Organization (WTO) website.
The final date for comments is Nov. 26, 2023.
Official sourceSanitation, Performance
Israel
8/28/2023
Israel SII Publishes Draft Revision of Standard SI 1505 Part 2 - Drinking Water Treatment Systems: Reverse Osmosis Systems
On Aug. 28, 2023, the Standards Institution of Israel (SII) notified its draft standard SI 1505 Part 2 - Drinking water treatment systems: Reverse Osmosis Systems to World Trade Organization (WTO). This mandatory standard will replace its Oct. 2019 edition.
Feedbacks and comments are accepted until Oct. 27, 2023.
Official sourceSanitation, Performance
Israel
7/17/2023
Israel SII Publishes Draft Standard SI 1505 Part 1 - Drinking Water Treatment Systems: Systems Except Reverse Osmosis System
On July 17, 2023, the Standards Institution of Israel (SII) published draft standard SI 1505 Part 1 - Drinking Water Treatment Systems: Systems Except Reverse Osmosis System through World Trade Organization (WTO). This mandatory standard deals with drinking water treatment systems except reverse osmosis systems.
Feedbacks and comments were accepted until Sept. 15, 2023.
Official sourceSanitation, Safety
Thailand
6/27/2023
Thailand OCPB Publishes Draft Notification to Add Water Filter as Label-controlled Products under Consumer Protection Act
On June 27, 2023, the Office of the Consumer Protection Board (OCPB) published a draft notification to add water filters as label-controlled products.
Official sourceWireless
Namibia
8/21/2023
Namibia CRAN Publishes Type Approval Regulations
On Aug. 21, 2023, the Communications Regulatory Authority of Namibia (CRAN) published Regulations in Respect of Telecommunications Equipment Requiring Type Approval: Communications Act, 2009 (GG 8180 No. 495).
Please contact your local UL Solutions office for more information.Wireless
Indonesia
8/28/2023
Indonesia SDPPI Opens Public Consultation regarding the Implementation of Mandatory SAR Testing for Telecommunications Equipment
On Aug. 28, 2023, the Directorate General of Resources and Equipment of Post and Information Technology (SDPPI) released further updates on the implementation of mandatory SAR testing on telecommunications equipment. A draft ministerial decree is currently being prepared which establishes SAR limits, test method standards, types of equipment subject to SAR testing obligations, stages of implementing SAR obligations, and certification schemes.
An implementation plan is being prepared for efficient administration. Consequently, stakeholders (i.e., vendors, laboratories, etc.) are invited to provide input on this undertaking. Feedbacks were accepted until Sept. 11, 2023.
Official sourceWireless
Argentina
8/18/2023
Argentina Enacom Publishes Technical Standards for Broadband Digital Modulation Systems and Frequency Hopping Systems (FHSS)
On Aug. 18, 2023, the National Communications Entity (Enacom) published Resolution No 1132/2023 which approves the Technical Standards ENACOM-Q2-63.02 V23.1 Equipment Integrating Broadband Digital Modulation Systems and Technical Standard ENACOM-Q2-63.03 V23.1 Equipment Integrating Frequency Hopping Systems.
Official sourceWireless
China
8/31/2023
China MIIT Publishes Notice on the Revision of SRRC Certificate Template and Code Rules of CMIIT ID for Radio Transmission Equipment
On Aug. 31, 2023, the Ministry of Industry and Information Technology (MIIT) published Notification No. 47 of 2023 Notice of the General Office of the Ministry of Industry and Information Technology on Revision of the Type Approval Certificate (SRRC Certificate) Template and Code Rules of CMIIT ID for Radio Transmission Equipment, which will come into effect from Dec. 1, 2023.
Official sourceWireless
Australia
8/31/2023
Australia ACMA Publishes Amendment of Radiocommunications (Labelling) Determination
On Aug. 31, 2023, the Australian Communications and Media Authority (ACMA) published an amended Radiocommunications (Labelling) Determination 2023.
Official sourceWireless
Argentina
8/16/2023
Argentina Enacom Publishes Technical Standards for Level Detection Radar
On Aug. 16, 2023, the National Communications Entity (ENACOM) published Resolution 1134/2023 approving the technical standard Level Detection Radars, and establish that equipment operates as level detection radars, installed in open or closed containers may operate in the frequency band from 76 GHz to 81 GHz.
Official sourceWireless
Singapore
9/1/2023
Singapore IMDA Publishes Revision of Technical Specifications for SRD
On Sept. 1, 2023, the Infocomm Media Development Authority (IMDA) of Singapore published a revision of Technical Specification Short Range Devices (IMDA TS SRD Issue 1 Revision 3, September 2023).
Official sourceWireless
Malaysia
8/28/2023
Malaysia MCMC Publishes Class Assignment No.1 of 2023
On Aug. 28, 2023, the Malaysian Communications and Multimedia Commission (MCMC) published Class Assignment No.1 of 2023.
Official sourceWireless
Brazil
9/4/2023
Brazil Anatel Extends Timelines for the Technical Requirements and Test Procedures for Conformity Assessment of Chargers Used in Cellular Mobile Telephones
On Sept. 4, 2023, the National Telecommunications Agency (Anatel) published Act No. 13011 which amends Articles 2 and 3 of Act No. 5159 of April 8, 2022.
Official sourceWireless
Taiwan
8/25/2023
Taiwan MODA Publishes Amendment to the Radio Frequency Allocation Table of August 2023
On Aug. 25, 2023, the Ministry of Digital Affairs (MODA) of Taiwan published an amendment to the Radio Frequency Allocation Table of the Republic of China (Taiwan), which become effective on the same day.
Official sourceWireless
Vietnam
9/5/2023
Vietnam MIC Announces Partial and Full Suspension of Implementation of Several Technical Standards in the List of Products Requiring Type Approval and/or DoC
On Sept. 5, 2023, the Vietnam Ministry of Information and Communications (MIC) announced under Circular No. 10/2023/TT-BTTTT the invalidation of the application of regulations on the partial/full implementation of a number of technical regulations in Circular No. 04/2023/TT-BTTTT dated May 31, 2023 will stipulate the list of potentially unsafe products and goods under the management of the MIC.
Official sourceWireless
Brazil
9/6/2023
Brazil Anatel Publishes Draft Technical Requirements for Charger Used in Cellular Mobile Phones
On Sept. 6, 2023, the National Telecommunications Agency (Anatel), published Public Consultation No. 41 Technical Requirements for Charger Used in Cellular Mobile Phones.
Comments can be submitted until Nov. 14, 2023.
Official sourceWireless
France; French Polynesia
9/12/2023
France ANFR Announces Temporary Withdrawal of iPhone 12 from the Market
On Sept. 12,2023, the National Frequency Agency (ANFR) of France announced that Apple should temporarily withdraw their iPhone 12 from the French market, including French Polynesia. ANFR’s request for withdrawal is due to non-compliance of the product to Specific Absorption Rate (SAR) limits. SAR values are expected to comply with European regulations.
Official sourceWireless
Brazil
9/4/2023
Brazil Anatel Publishes Technical Requirements for the Conformity Assessment of Transmitters and Transceivers
On Sept. 4, 2023, the National Telecommunications Agency (Anatel) published Act No. 10029 Technical Requirements for Evaluating the Conformity of Transmitters and Transceivers.
Official sourceWireless
Mexico
9/20/2023
Mexico IFT Publishes Amendment to the Technical Specifications on Cellular Broadcasting Service for Risk or Emergency Notification
On Sept. 20, 2023, the Mexico Federal Telecommunications Institute (IFT) published an amendment to Draft Technical Provision IFT-011-2022: Technical Specifications of Mobile Terminal Equipment. Part 3. Cellular Broadcasting Service for Notification of Risk or Emergency Situations.
Official sourceWireless
Somalia
9/18/2023
Somalia NCA Opens Public Consultation on the Draft 5G Strategy
On Sept. 18, 2023, the National Communications Authority (NCA) of Somalia opened Public Consultation Document on Draft National 5G Strategy.
Comments are accepted until Nov. 2, 2023.
Please contact your local UL Solutions office for more information.Wireless, Cyber Security
Serbia
9/4/2023
Serbia RATEL Opens Public Consultation on the Draft Rulebook on Radio Equipment
On Sept. 4, 2023, the Regulatory Agency for Electronic Communications and Postal Services (RATEL) of Serbia opened a public consultation on Draft Rulebook on Radio Equipment.
Comments were accepted until Oct. 5, 2023.
Official source- September 2023 updates
Regulation Country Published Date Summary Textiles, Apparel and Footwear
USA
10/15/2023
U.S. CPSC Issues Final Rule for the Standard for the Flammability of Clothing Textiles
The U.S. Consumer Product Safety Commission (Commission or CPSC) is amending the Standard for the Flammability of Clothing Textiles. The revisions clarify existing provisions, expand permissible equipment and materials for testing, and update equipment requirements that are outdated. The Commission issues this amendment under the authority of the Flammable Fabrics Act (FFA).
The purpose of the FFA is to prohibit the importation, manufacture for sale, or sale in commerce of any fabric or article of wearing apparel that is “so highly flammable as to be dangerous when worn by individuals.”EPR
France
9/30/2023
France Publishes Decree No. 2023-906 relating to Various Provisions relating to the Merger of the Extended Responsibility Sectors of Producers of Household Packaging, Printed Paper, and Graphic Paper
France published Decree No. 2023-906 relating to various provisions relating to the merger of the extended responsibility sectors of producers of household packaging, printed paper, and graphic paper.
The decree is taken for the application of law no. 2023-305 of April 24, 2023, merging the extended responsibility sectors of producers of household packaging and producers of printed paper and paper for graphic use. It specifies in particular the method for making information inserts available free of charge, the technical characteristics of these inserts and the environmental performance criteria of the products eligible for this bonus.
Toys
USA
10/13/2023
ASTM Publishes ASTM F-963-23 Standard Consumer Safety Specification for Toy Safety
ASTM International has published ASTM F-963-23 Standard Consumer Safety Specification for Toy Safety.
This specification covers requirements and contains test methods for toys intended for use by children under 14 years of age. Different age limits for various requirements will be found in this specification. These limits reflect the nature of the hazards and expected mental or physical ability, or both, of a child to cope with the hazards.
This specification does not cover product performance or quality, except as related to safety.Chemicals
Europe
9/27/2023
EC Publishes Commission Regulation (EU) 2023/2055 to Restrict Synthetic Polymer Microparticles under the European Union REACH Regulation
The European Commission (EC) has published Commission Regulation (EU) 2023/2055 amending Annex XVII to REACH Regulation (EC) No 1907/2006 concerning synthetic polymer microparticles.
This amends Annex XVII to specify that synthetic polymer microparticles shall not be placed on the market as substances on their own or, where the synthetic polymer microparticles are present to confer a sought-after characteristic, in mixtures in a concentration equal to or greater than 0,01 % by weight.
Example of products affected by this restriction are: cosmetics, toys (such as slime that contains microplastic, glitter, microbeads, infill material for sport pitches, etc.).Cosmetics
USA
8/15/2023
Oregon Passes Bill to Relating to Chemicals Used in Cosmetic Products
Oregon has passed SB 546 - Bill relating to chemicals used in cosmetic products.
This bill requires the Oregon Health Authority:- Adopt and maintain list of designated high priority chemicals of concern used in cosmetic products and to periodically review and revise list.
- Post certain information on the authority’s website.
Food contact materials, juvenile products
India
8/17/2023
India Published New Draft Standard for Plastic Feeding and Drinking Containers Accessories and Cutleries for Infant; Opens for Public Consultation
On 17 August 2023, the Bureau of Indian Standards (BIS) published a New Indian draft standard for plastic feeding and drinking containers accessories and cutleries for Infant and Child Use Specification. This is a new Draft Indian Standard which prescribes the requirements, methods of sampling, safety aspects and test method for feeding and drinking containers and accessories for infants and children. The draft is open for comments until 16 October 2023.
The standard does not apply to infant feeding bottles and teats for feeding bottles, as standards for those products are already covered under IS14625 and IS3565.Hardlines, Batteries
USA
9/21/2023
U.S. CPSC Publishes Final Rules on the Safety Standard for Button Cell or Coin Batteries and Consumer Products Containing Such Batteries
The U.S. CPSC has published final rules on the Safety Standard for Button Cell or Coin Batteries and Consumer Products Containing Such Batteries to address the requirements of Reese’s Law, enacted August 16, 2022.
This final rule incorporates ANSI/UL 4200A as a mandatory standard for consumer products containing button cell or coin batteries. The standard provides performance, labeling and warning requirements for these products.
The final rule also provides packaging labeling for button cell/coin battery.
Third party testing and certification of children's products in compliance with 16 CFR 1112 is not required until on or after December 20, 2023.Chemicals
Europe
9/25/2023
EC Adopted Measures that Restrict Microplastics under the European Union REACH Regulation
The European Commission (EC) has adopted a draft Commission Regulation (EU) amending Annex XVII to REACH Regulation (EC) No 1907/2006 concerning synthetic polymer microparticles.
Moreover, the EC has published Questions and Answers on restriction to intentionally added microplastics.
This aims to restrict microplastics intentionally added to products under the REACH Regulation - it covers all synthetic polymer particles below five millimeters that are organic, insoluble and resist degradation.
Examples of products affected by this restriction are: cosmetics and toys (such as slime that contains microplastic, glitter, microbeads and infill material for sports pitches.)Hardlines and Softlines, Batteries
USA
9/11/2023
U.S. CPSC Votes to Approve a Mandatory Standard for the Safety of Button Cell and Coin Batteries
The U.S. Consumer Product Safety Commission (CPSC) voted to approve a mandatory standard to reduce button cell and coin battery ingestion hazards to children six years and younger. These batteries are used in many types of consumer products from keyless entry remotes and wireless game controllers.
Pursuant to Reese's Law, CPSC voted to adopt ANSI/UL 4200A-2023 Standard for Safety for Products Incorporating Button Batteries or Coin Cell Batteries, as the mandatory standard for consumer products containing button cell or coin batteries. The Commission also established labeling requirements for button cell or coin battery packaging.Chemicals
USA
7/5/2023
USA Maine Adopts Act on Prohibition of Fluorescent Mercury-Added Lamps
On July 5, 2023, the Committee on Environment and Natural Resources of Maine adopted an Act to reduce mercury in the environment by phasing out certain fluorescent lamps. This Act discusses the prohibitions on sale or distribution of certain mercury-added fluorescent lamps in the State of Maine.Chemicals
USA
7/5/2023
USA Governor of Hawaii Approves Act on Prohibition of Mercury-Added Fluorescent Lamps
On July 5, 2023, the Governor of Hawaii approved House Bill 192 into an Act to reduce mercury in the environment by phasing out certain fluorescent light lamps. This Act prohibits the sale of certain mercury-containing fluorescent lamps as a new manufactured product, with certain exemptions in the State of
Hawaii.Chemicals
EU
8/8/2023
European Union Parliament and Council Publishes Regulation Amending Annex I to POP Regulation to include Perfluorohexane Sulfonic Acid (PFHxS), Its Salts and PFHxS-related Compounds
On August 8, 2023, the European Commission (EC) published Commission Delegated Regulation (EU) 2023/1608 of 30 May 2023 amending Annex I to Regulation (EU) 2019/1021 of the European Parliament and of the Council as regards the listing of perfluorohexane sulfonic acid (PFHxS), its salts and PFHxS-related compounds.
This Regulation specifies the limit values for PFHxS, its salts and
PFHxS-related compounds in substances, mixtures and articles. These values were added to Annex I to Regulation (EU) 2019/1021 (POP Regulation).F Gas, Chemicals
Hong Kong
7/10/2023
Hong Kong EEB Releases Public Consultation on the Proposal to Regulate and Phase Down Hydrofluorocarbons (HFCs) for Implementation of the Kigali Amendment to the Montreal Protocol
On July 10, 2023, the Environment and Ecology Bureau released a public consultation on the proposal to regulate and phase down hydrofluorocarbons in Hong Kong.
This public consultation discusses:- key elements of the Kigali Amendment;
- use of HFCs in Hong Kong and their alternatives;
- overseas practices in implementation of Kigali Amendment; and
- proposal to regulate and phase down Hydrofluorocarbons (HFCs).
The consultation period was from July 10, 2023 to September 9, 2023.
Cyber Security
USA
7/18/2023
USA FCC Proposes Voluntary Cybersecurity Labeling Program for Smart Devices
On July 18, 2023, the Federal Communications Commission (FCC) of the United States of America introduced a proposal for the U.S. Cyber Trust Mark program, which is a voluntary cybersecurity labeling program for smart devices.Cyber Security
EU
7/28/2023
European Union CENELEC Publishes New Standard EN IEC 62351-3:2023 - Communication Network and System Security Profiles TCP/IP
On July 28, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 62351-3:2023 for power systems management and associated information exchange - communication network and system security - profiles including TCP/IPs.
The date of withdrawal of superseded version is July 11, 2026.Cyber Security
EU
7/28/2023
European Union CENELEC Publishes New Standard EN IEC 62351-9:2023 - Cyber Security Key Management for Power System Equipment
On July 28, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 62351-9:2023 for power systems management and associated information exchange - data and communications security - cyber security key management for power system equipment.
The date of withdrawal of superseded version is July 11, 2026.Cyber Security, Wireless
Taiwan
6/29/2023
Taiwan BSMI Adds Cybersecurity Requirements for the Voluntary Product Certification (VPC) for Electric Vehicle (EV) Charging System
On June 29, 2023, the Bureau of Standards, Metrology and Inspection (BSMI) of Taiwan announced that cybersecurity requirements are added to its Voluntary Product Certification (VPC) Program for Electric Vehicle (EV) charging system.
The notification was published on BSMI official website on July 20, 2023, which gave an effective date on June 29 and a one-year transitional period till July 1, 2024.Electrical and Electronic Waste
South Korea
8/16/2023
South Korea Ministry of Environment Amends Act on Resource Recycling of Electrical and Electronic Appliances and Motor Vehicles to Include Provisions on Material and Structural Improvements
On August 16, 2023, the Ministry of Environment released partial amendment of the Act on Resource Recycling of Electrical and Electronic Appliances and Motor Vehicles to include provision for manufacturers and importers of electrical and electronic products to conduct an evaluation of the material and structural improvements of their products and submit the results of the evaluation to the Korea Electronics and Information and Communication Industry Promotion Council.Electrical and Electronic Waste, RoHS, Chemicals
India
7/24/2023
India MoEF Publishes E-Waste (Management) Second Amendment Rules, 2023 Postponing RoHS Compliance Dates for Several Categories of Electrical and Electronic Products
On July 24, 2023, the Ministry of Environment, Forest and Climate Change of India published E-Waste (Management) Second Amendment Rules, 2023. These Rules amend the E-Waste (Management) Rules, 2022 by postponing compliance date for several categories of electrical and electronic products.EMC
EU
7/28/2023
European Union CENELEC Publishes New Standard EN IEC 61000-4-6:2023 - Immunity to Conducted Disturbances, Induced by Radio-frequency Fields
On July 28, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61000-4-6:2023 for electromagnetic compatibility (EMC) - testing and measurement techniques - immunity to conducted disturbances, induced by radio-frequency fields.
The date of withdrawal of superseded version is July 11, 2026.EMC
Israel
7/27/2023
Israel SII Prepares Draft Standard SI 61000 Part 4.30 Amendment 1 for Electromagnetic Compatibility (EMC) : Power Quality Measurement Methods
On July 27, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 61000 Part 4.30 Amendment number 1 for electromagnetic compatibility (EMC): testing and measurement techniques – power quality measurement methods.
Comments and feedback were accepted until August 17, 2023.EMC
EU
8/4/2023
European Union CENELEC Publishes Amended Standard EN 55016-2-3:2017/A2:2023 for Radiated Disturbance Measurements
On August 4, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 55016-2-3:2017/A2:2023 related to specification for radio disturbance and immunity measuring apparatus and methods - methods of measurement of disturbances and immunity - radiated disturbance measurements.EMC
China
7/24/2023
China CQC Issues Notice on the Implementation of the New EMC Standard GB 17625.1-2022 for Type II Voluntary Certification of Electric Tools
On July 24, 2023, the China Quality Certification Centre (CQC) issued a notice on the implementation requirement of the new version of the electromagnetic compatibility limits standard GB 17625.1-2022 for Type II voluntary certification of electric tools, which will become effective on July 1, 2024.EMC
Global, CB Scheme
8/9/2023
IECEE Adds New Decision Sheet Related to EMC Category on Week 33
On August 9, 2023, new decision sheet related to EMC product category was uploaded on the IECEE website.- DSH 2204 - Test set-up issues and equipment operation with AMN attached.
EMC, Energy Efficiency, Explosive Atmospheres, RoHS, Safety, Wireless, Chemicals
United Kingdom
8/1/2023
United Kingdom Department for Business & Trade Announces Extension of CE Mark Recognition for Businesses
On August 1, 2023, the UK Government’s Department for Business & Trade (DBT) announced an indefinite extension of the use of CE marking for goods being placed on the market in Great Britain (England, Wales and Scotland). This will be applied to 18 regulations owned by DBT.EMC, Safety
China
7/25/2023
China CQC Issues Revised Implementation Rules for CCC Certification of Lighting Appliances (CQC-C1001-2014)
On July 25, 2023, the China Quality Certification Centre (CQC) issued a notice on the fourth revision of CQC-C1001-2014 Compulsory Product Certification Implementation Rules for Lighting Appliances which is used in conjunction with the CNCA implementation rules CNCA-C10-01: 2014 for CCC product category 10 Lighting Electrical Appliance.EMC, Safety
Global, CB Scheme
8/4/2023
IECEE Adds New Test Report Forms (TRFs) on Week 31
On August 4, 2023, the following TRFs were published and added to the IECEE website.
TRF No.
TRF Originator
EU_GD_IEC62841_2_6B
DEKRA Certification B.V.
JP_ND_IEC61010_1P
TÜV Rheinland Japan Ltd.
The following TRFs (including where applicable Group Differences and National Difference) were updated:
TRF No.
TRF Originator
EU_GD_IEC61010_2_101D
VDE Prüf- und Zertifizierungsinstitut GmbH
CA_ND_IEC60601_1_2J_EMC
CSA Group
IEC62841_2_1E
TÜV Rheinland Intercert Kft.,
MEEI DivisionIEC62841_2_1F
TÜV Rheinland Intercert Kft.,
MEEI DivisionEMC, Wireless
South Korea
6/30/2023
South Korea RRA Expands Scope to Cover WPT for EV and Other Transportation Means
On June 30, 2023, the South Korean National Radio Research Agency (RRA) published under Notice No. 2023-6 the partial revision of Notice on Conformity Assessment of Broadcasting and Communication Equipment, etc.EMC, Wireless
Canada
8/3/2023
Canada ISED Amends Certification Requirements for Radio Apparatus Operating in Several Frequencies Employing FHSs/DTSs to Incorporate 5850-5895 MHz for LE-LAN Devices
On August 3, 2023, the Innovation, Science and Economic Development Canada (ISED) published RSS-247, Issue 3 - Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and License-Exempt Local Area Network (LE-LAN) Devices.Energy Efficiency
Costa Rica
7/27/2023
Costa Rica INTECO Publishes New Draft Standard PN INTE E82-2:2023 - Energy Efficiency Labeling Requirements for Heat Pumps
On July 27, 2023, the Institute of Technical Standards of Costa Rica (INTECO) published PN INTE E82-2:2023. This standard deals with energy labeling requirements of heat pumps for space heating and cooling and process chillers.
PN INTE E82-2:2023 draft standard was open for public consultation until August 26, 2023.Energy Efficiency
USA
7/27/2023
USA DOE Publishes Final Rule for the Energy Test Procedure for Dishwashers
On July 27, 2023, the US Department of Energy (DOE) published a final rule for the test procedure for dishwashers.
The changes on this final rule are the following:- clarifying the dishwasher instructions to include information on the acceptable dosage options for each kind of detergent;
- clarifying the existing detergent reporting requirements; and
- adding an enforcement provision for dishwashers to specify the detergent and dosing method that DOE would use for any enforcement testing of dishwasher models certified in accordance with the currently applicable dishwasher test procedure prior to July 17, 2023 (i.e., the date by which the dishwasher test procedure as amended by a final rule published on January 18, 2023 will be mandatory for product testing).
Energy Efficiency
USA
7/28/2023
USA DOE Publishes Proposed Rules for the Energy Conservation Standards for Consumer Water Heaters
On July 28, 2023, the US Department of Energy (DOE) published a proposed rulemaking regarding the energy conservation standards for consumer water heaters.
DOE will accept comments, data, and information regarding this NOPR no later than September 26, 2023.Energy Efficiency
Taiwan
7/21/2023
Taiwan MOEA Issues New Energy Efficiency Requirements for Three-Phase AC Motor Driven Fans
On July 21, 2023, the Ministry of Economic Affairs (MOEA) issued Notice No. 11258002530 announcing the Requirements on Minimum Energy Performance Standard, Labelling and Inspection of Fans, which will become effective on July 1, 2024.Energy Efficiency
Taiwan
7/27/2023
Taiwan BOE Issues Draft Amendments to the Energy Efficiency Requirements for Dehumidifiers
On July 27, 2023, the Bureau of Energy (BOE) of the Ministry of Economic Affairs (MOEA) issued a draft amendment to the Requirements on Minimum Energy Performance Standard and Energy Efficiency Rating Labelling and Inspection for Dehumidifiers through World Trade Organization (WTO) notification G/TBT/N/TPKM/528 and is open for public comment until September 26, 2023.Energy Efficiency
Peru
8/1/2023
Peru MEM Publishes Draft Regulation for the Installation and Operation of the Electric Mobility Charging Infrastructure
On August 1, 2023, the Ministry of Energy and Mines published a draft regulation for the installation and operation of the electric mobility charging infrastructure. The objective of ICME is to provide a regulatory framework to direct the many parties engaged in the installation and operation of the infrastructure for electric mobility charging.
Comment date ends on September 30, 2023.Energy Efficiency
Ukraine
6/14/2023
Ukraine Publishes Draft Resolution on Technical Regulation on Eco-design Requirements for Small, Medium and Large Power Transformers
On June 14, 2023, the Cabinet of Ministers of Ukraine published a draft resolution related to some issues of application of the technical regulation on eco-design requirements for small, medium and large power transformers.Energy Efficiency
USA
8/2/2023
USA DOE Publishes Proposed Rules for the Energy Conservation Standards for Consumer Conventional Cooking Products
On August 2, 2023, the US Department of Energy (DOE) published a proposed rule for the energy conservation standards for consumer conventional cooking products.
DOE accepted comments, data, and information regarding this NODA until September 1, 2023.<Energy Efficiency
USA
8/8/2023
USA DOE Publishes Technical Amendment on the Final Rule of Test Procedure for Fans and Blowers
On August 8, 2023, the US Department of Energy (DOE) published technical amendments on the final rule of test procedures for fans and bowers.Energy Efficiency
USA
8/8/2023
USA DOE Publishes Correction on the Test Procedure for Air Cleaners
On August 8, 2023, the US Department of Energy (DOE) published a correction on the test procedure for air cleaners.Energy Efficiency
Canada
8/2/2023
Canada SCC Reaffirmation of CSA C368.1:14 (R2019)- Energy Performance of Room Air Conditioners
On August 2, 2023, the Standards Council of Canada (SCC) started reviewing CSA C368.1:14 (R2019). This standard deals with the energy performance of room air conditioners.
Comments were accepted until August 30, 2023.Energy Efficiency
Costa Rica
8/15/2023
Costa Rica INTECO Publishes Draft Standards PN INTE E13-1:2023 & PN INTE E13-3:2023 - Requirements and Test Method of AC Motors
On August 15, 2023, the Institute of Technical Standards of Costa Rica (INTECO) published draft standards:- PN INTE E13-1:2023 - Energy efficiency. Alternating Current Motors, Three-phase Induction, Squirrel Cage Type, in Nominal Power from 0.746 kW to 373 kW. Part 1: Requirements.
- PN INTE E13-3:2023 - Energy Efficiency. Alternating Current Motors, Three-phase Induction, Squirrel Cage Type, in Nominal Power from 0.746 kW to 373 kW. Part 3: Test Method
The standard was open for public consultation until October 6, 2023.
Energy Efficiency
USA
8/14/2023
USA DOE Publishes Proposed Rule for the Energy Conservation Standards for Consumer Boilers
On August 14, 2023, the US Department of Energy (DOE) published proposed rules for the energy conservation standards for consumer boilers.
DOE will accept comments, data, and information regarding this NOPR no later than October 13, 2023.Energy Efficiency
USA
8/17/2023
USA DOE Publishes Proposed Rule for the Test Procedures for Air-Cooled, Evaporatively-Cooled, and Water-Cooled Commercial Package Air Conditioners and Heat Pumps
On August 17, 2023, the US Department of Energy (DOE) published proposed rules for the energy test procedure for air-cooled, evaporatively-cooled, and water-cooled commercial package air conditioners and heat pumps.
DOE will accept comments, data, and information regarding this notice of proposed rulemaking (NOPR) no later than October 16, 2023.Energy Efficiency
South Korea
8/21/2023
South Korea MOTIE Publishes Partial Revision of Efficiency Management Equipment Operation Regulations
On August 21, 2023, the South Korea Ministry of Trade, Industry and Energy published the partial revision of Efficiency Management Equipment Operation Regulations (MOTIE Notice No. 2023-170).Energy Efficiency
Thailand
8/8/2023
Thailand EGAT Plans Implementation of New EGAT Label Format for Some Electrical and Electronic Products
On August 8 until August 10, 2023, the Electricity Generating Authority of Thailand (EGAT) conducted meetings related to implementation of the new EGAT label formats for some electrical and electronic products on January 1, 2024.
EGAT had meetings with stakeholders (manufacturers & importers) of some electrical and electronic products:- Air conditioners and air purifiers on August 8, 2023;
- Washing machines, televisions and water pumps on August 9, 2023; and
- Refrigerators, display cabinets and cold/hot water dispensers on August 10, 2023.
Please contact your local UL Solutions office for more information.
Energy Efficiency
Bolivia
8/24/2023
Bolivia MDPyEP Releases Draft Regulation on Energy Efficiency of LED Lamps
On August 23, 2023, the Bolivia's Ministry of Productive Development and Plural Economy (MDPyEP) and Ministry of Hydrocarbons and Energies (MHE) released Draft Regulation on Energy Efficiency of LED Lamps. This establishes the technical requirements on Energy Efficiency of LED Lamps.
Comments are accepted until October 23, 2023 with planned adoption on November 24, 2023.Energy Efficiency, Explosive Atmospheres, RoHS, Safety, Chemicals, Cyber Security, EMC, F Gas, Noise, Performance, Electrical and Electronic Waste, REACH, Sustainability, Sanitation, Water Efficiency, Wireless
United Arab Emirates
7/3/2023
UAE MoE Publishes Cabinet Decision No. (66) of 2023 Regarding the Executive Regulations of the Federal Law No. 15 of 2020 on Consumer Protection
On July 3, 2023, the Ministry of Economy (MoE) published Cabinet Decision Number (66) of 2023 regarding the executive regulations of the Federal Law No. 15 of 2020 on consumer protection.Energy Efficiency, Performance
Egypt
7/5/2023
Egypt MCI Publishes Ministerial Decree on the Implementation of the Standard ES 8057:2022 - Methods for Measuring and Calculating Energy Efficiency of Vacuum Cleaners
On July 5, 2023, the Ministry of Commerce and Industry of Egypt (MCI) published Ministerial Decree n. 197/2023 on the implementation of the standard ES 8057:2022 which deals with measuring and calculating energy efficiency of vacuum cleaners.
Please contact your local UL Solutions office for more information.Energy Efficiency, Performance
Egypt
7/5/2023
Egypt MCI Publishes Ministerial Decree on the Implementation of the Energy Efficiency Standard ES 4100:2023 for Washing Machines
On July 5, 2023, the Ministry of Commerce and Industry of Egypt (MCI) published Ministerial Decree n. 197/2023 on the implementation of the standard ES 4100:2023 which deals with measuring and calculation of energy consumption of washing machines.
Please contact your local UL Solutions office for more information.Energy Efficiency, Performance
Egypt
7/5/2023
Egypt MCI Publishes Ministerial Decree on the Implementation of the Energy Efficiency Standards for Instantaneous and Storage Water Heaters
On July 5, 2023, the Ministry of Commerce and Industry of Egypt (MCI) published Ministerial Decree n. 197/2023 on the implementation of the standard ES 8187:2023 and ES 5806:2023 which deals with measuring and calculating energy efficiency of instantaneous and storage water heaters.Energy Efficiency, Performance
Egypt
7/5/2023
Egypt MCI Publishes Ministerial Decree on the Implementation of the Energy Efficiency Standard ES 7823-1:2023 for Electrical Lamps
On July 5, 2023, the Ministry of Commerce and Industry of Egypt (MCI) published Ministerial Decree n.196/2023 on the implementation of the standard ES 7823-1:2023 which deals with the energy efficiency of electric lamps
Please contact your local UL Solutions office for more information.Energy Efficiency, Performance, Electrical and Electronic Waste
EU
8/24/2023
European Union EC Starts Initiatives to Review Eco-design and Energy Labelling Requirements for Electronic Displays
On August 24, 2023, the European Commission (EC) started initiatives to review the eco-design and energy labelling requirements for electronic displays. This move aims to update and align the current regulations with today's technological progress while also addressing issues encountered since the enforcement of the standing directives.
Comments are accepted until September 21, 2023.Energy Efficiency, RoHS, Safety, Chemicals
Saudi Arabia
8/4/2023
Saudi Arabia SASO Publishes Draft Decision to Mandate the Use of Type-C USB Charging Ports for Smart Phones and Electronic Devices
On August 4, 2023, the Saudi Standards, Metrology and Quality Organization Board of Director published a decision on the standardization of charging ports for mobile phones and electronic devices. The USB Type-C connector will be the sole standardized connector.Energy Efficiency, Safety
Brazil
8/10/2023
Brazil INMETRO Issues Public Consultation of the Amendment to the Consolidated Regulation for Solar Water Heating Equipment (Portaria 420/2021)
On August 10, 2023, the National Institute of Metrology, Standardization and Industrial Quality (INMETRO) proposed changes to Portaria No. 420 of October 4, 2021 related to the safety and energy efficiency requirements for solar water heating equipment certification to simplify the process and reduce the burden on manufacturers.
The public consultation is open until October 9, 2023.Explosive Atmospheres
Saudi Arabia
7/24/2023
Saudi Arabia SASO Prepares Draft Technical Regulations for Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres
On July 4, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) prepared draft technical regulation for equipment and protective systems intended for use in potentially explosive atmospheres.
Comments and feedback can be sent until September 22, 2023.Explosive Atmospheres
China
7/10/2023
China CQC Issues Notice on the Amendments to the Implementation Rules for CCC Certification of Explosion-Proof Electrical Apparatus (CQC-C2301-2019)
On July 10, 2023, the China Quality Certification Centre (CQC) issued a notice on the fourth revision of CQC-C2301-2019 Compulsory Product Certification Implementation Rules for Explosion-Proof Electrical Apparatus, following the requirements of the Certification and Accreditation Administration of the People’s Republic of China (CNCA) notice on adjusting and optimizing the CCC certification procedure for electronic and electrical appliances.
The revised CQC-C2301-2019 is used with CNCA-C23-01:2019 Compulsory Product Certification Implementation Rules Explosion-Proof Electrical Product, effective July 15, 2023.Explosive Atmospheres
Australia, New Zealand
8/25/2023
Australia & New Zealand Publish AS/NZS IEC 60079.31:2023 - Requirements for Equipment Dust Ignition Protection by Enclosure ’t’
On August 25, 2023, the Standards Australia and New Zealand published AS/NZS IEC 60079.31:2023. This standard specifies requirements for design, construction and testing of Ex equipment and Ex components, and is applicable to equipment protected by enclosure and surface temperature limitation for use in explosive
dust atmospheres.Explosive Atmospheres
Australia, New Zealand
8/25/2023
Australia & New Zealand Publish AS/NZS IEC 60079.26:2023 - Requirements for Equipment with Separation Elements or Combined Levels of Protection
On August 25, 2023, the Standards Australia and New Zealand published AS/NZS IEC 60079.26:2023. This standard specifies requirements for construction, testing and marking for Ex equipment that contains parts of the equipment with different Equipment Protection Levels (EPLs) and a separation element.Performance
EU
8/4/2023
European Union CENELEC Publishes New Standard EN IEC 60904-2:2023 - Requirements for Photovoltaic Reference Devices
On August 4, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 60904-2:2023 for requirements of photovoltaic reference devices.
The date of withdrawal of the superseded version is July 24, 2026.Performance
EU
8/11/2023
European Union CENELEC Publishes New Standard EN 50723:2023 - Induction Hob and Cookware
On August 11, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN 50723:2023 for measurement method for assessing the compatibility of induction hob and cookware.Performance
EU
8/25/2023
European Union CENELEC Publishes New Standard EN IEC 61300-3-45:2023 - Multi-fiber Connectors
On August 25, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 61300-3-45:2023 for fiber optic interconnecting devices and passive components - attenuation of random mated multi-fiber connectors.
The date of withdrawal of superseded version is August 1, 2024.Performance, Safety
Global, CB Scheme
7/28/2023
IECEE Adds New Test Report Forms (TRFs) on Week 30
On July 28, 2023, new TRFs were published and added on the IECEE website.Performance, Safety
Global, CB Scheme
8/18/2023
IECEE Adds New Test Report Forms (TRFs) on Week 33
On August 18, 2023, the following TRFs were published and added on the IECEE website.
TRF No.
TRF Originator
IEC60269_4D
China Quality Certification Center (CQC)
IEC60335_2_44J
DEKRA Certification B.V.
IEC60601_2_21E
SGS Fimko Ltd
IEC60601_2_50F
SGS Fimko Ltd
IEC62040_3D
Intertek Testing Services (Singapore) Pte Ltd.
IEC62368_1F
UL Solutions (US)
RoHS, Safety, Chemicals
Saudi Arabia
8/25/2023
Saudi Arabia SASO Publishes Decision for Unifying the Types of Chargers for Smartphones, Tablets and Electronic Devices
On August 25, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) published a decision for unifying the types of chargers for smartphones, tablets and electronic devices.Safety
Global, CB Scheme
7/21/2023
IECEE Adds New Equipment List on Week 29
On July 21, 2023, the following testing equipment list with provisional status was published and added to the IECEE website.- IEC 60335-2-105:2016; IEC 60335-2-105:2016/AMD1:2019
- IEC 60335-2-85:2022
- IEC 60335-2-59:2021
- IEC 60335-2-55:2021
- IEC 60335-2-54:2022
- IEC 60335-2-52:2021
- IEC 60335-2-44:2021
- IEC 60335-2-21:2022
- IEC 60335-2-13:2021
- IEC 60335-2-3:2022
- IEC 62841-4-6:2022
Safety
Canada
7/20/2023
Canada SCC Reaffirmation of CSA E60730-2-15:14 (R2019) - Automatic Electrical Controls for Household and Similar Use
On July 20, 2023, the Standards Council of Canada (SCC) started reviewing CSA E60730-2-15:14 (R2019). This standard outlines the requirements for automatic electrical air flow, water flow and water level sensing controls.
Comments were accepted until August 1, 2023.Safety
Canada
7/20/2023
Canada SCC Reaffirmation of CSA C22.2 No. 60320-1:19 & CSA C22.2 No. 60320-3:19 - Appliance Couplers for Household and Similar General Purposes
On July 20, 2023, the Standards Council of Canada (SCC) started reviewing the following standards:- CSA C22.2 No. 60320-1:19 - Appliance Couplers for Household and Similar General Purposes - Part 1: General Requirements
- CSA C22.2 No. 60320-3:19 - Appliance Couplers for Household and Similar General Purposes - Part 3: Standard Sheets and Gauges.
Comments were accepted until August 16, 2023.
Safety
CB Scheme, Global
6/5/2023
IECEE Adds New Decision Sheets on Week 23
On June 5 & 6, 2023, new decision sheets were uploaded on the IECEE website.- PDSH 2221 - Battery charger fault test
- PDSH 2208 - Office/Information Technology Equipment/Audio/Video, information and communication technology equipment (OFF/ITE/AV_ICT) Equipment under IEC 60601-1 as a stand-alone product
Safety
EU
7/28/2023
European Union CENELEC Publishes Amended Standard EN 60061-2:1993/A59:2023 - Lamp holders
On July 28, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60061-2:1993/A59:2023 for lamp caps and holders together with gauges for the control of interchangeability and safety - lamp holders.Safety
EU
7/28/2023
European Union CENELEC Publishes Amended Standard EN 60061-3:1993/A59:2023 - Lamp Caps and Holders Gauges
On July 28, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60061-3:1993/A59:2023 for lamp caps and holders together with gauges for the control of interchangeability and safety - gauges.Safety
Lithuania
7/27/2023
Lithuania Ministry of Health Amends the Law on Ban of E-Cigarettes
On July 27, 2023, the Ministry of Health of Lithuania released two drafts laws to amend Tobacco, Tobacco Products and Related Products Control Law No. I-1143 9. These amendments are developed to fill the gaps in the existing regulation's provisions regarding the ban on electronic cigarettes and electronic cigarette refills.
The two drafts are:- on amendment of Articles 2, 92, 95 and 30 No. XIVP-2590; and
- (2). on amendment of Article 92 No. XIVP-2791.
The target implementation date is January 1, 2024.Safety
Ukraine
6/14/2023
Ukraine Publishes Order on Approval of the List of National Standards Related to the Technical Regulations on Pressure Equipment
On June 14, 2023, the Ministry of Economy published Order No. 5512 on approval of the list of national standards for the purposes of applying the technical regulations of equipment operating under pressure.Safety
India
7/14/2023
India DPIIT Publishes Quality Control Order (QCO) for Smart Meters
On July 14, 2023, the Department for Promotion of Industry and Internal Trade (DPIIT) published The Smart Meters (Quality Control) Order, 2023.
The Smart Meters (Quality Control) Order, 2023 mandates compulsory certification under IS Standards for smart meters manufactured for domestic market or imported into India.Safety
Egypt
7/5/2023
Egypt MCI Publishes Ministerial Decree on the Implementation of the Standard ES 182-1:2023 - General Requirements for PVC Insulated Cables
On July 5, 2023, the Ministry of Commerce and Industry of Egypt (MCI) published Ministerial Decree n. 197/2023 on the implementation of the standard ES 182-1:2023 which deals general requirements of PVC insulated cables.
Please contact your local UL Solutions office for more information.Safety
Egypt
7/5/2023
Egypt MCI Publishes Ministerial Decree on the Implementation of the Standard ES 537-2:2023 - Safety Requirements for Fans
On July 5, 2023, the Ministry of Commerce and Industry of Egypt (MCI) published Ministerial Decree n. 197/2023 on the implementation of the standard ES 537-2:2023 which deals with safety requirements of fans.Safety
China
7/28/2023
China CQC Issues Notice on Removing a Part of Lithium Ion Cells and Batteries and Portable Power Banks Products from CQC Voluntary Certification Categories
On July 28, 2023, the China Quality Certification Centre (CQC) issued a notice on adjusting the application scope of CQC voluntary certification for 001031 Lithium ion cells and batteries for portable/stationary electronic equipment and 001046 Power bank for portable digital devices due that some lithium ion batteries, battery packs and power banks products have been added into CCC scope.
CQC stopped to accept the application for CQC voluntary certification for removed products from August 1, 2023.Safety
Chile
8/8/2023
Chile SEC Publishes Draft Technical Update Specification for the Infrastructure for Recharging Electric Vehicle
On August 8, 2023, the Superintendency of Electricity and Fuels (SEC) released draft update Technical Specification RIC No. 15 which deals with the infrastructure for electric vehicle recharging.
The submission of comments is until September 20, 2023.Safety
Egypt
7/5/2023
Egypt MCI Publishes Ministerial Decree on the Implementation of the Standard ES 6575:2023 - Safety Requirements for Dishwashers
On July 5, 2023, the Ministry of Commerce and Industry of Egypt (MCI) published Ministerial Decree n. 197/2023 on the implementation of the standard ES 6575:2023 which deals with safety requirements of dishwashers.Safety
Canada
7/27/2023
Canada SCC Publishes Amendment of ANSI/CAN/UL 325:2023 - Standard for Safety for Door, Drapery, Gate, Louver, and Window Operators and Systems
On July 27, 2023, the Standards Council of Canada (SCC) published an amendment revision for the standard ANSI/CAN/UL 325:2023. It deals with standard for safety for door, drapery, gate, louver, and window operators and systems.
Comments were accepted until August 23, 2023.Safety
Canada
7/31/2023
Canada SCC Publishes Amendment of CSA C22.2 NO. 62133-2:20 - Safety Requirements for Portable Sealed Secondary Cells and Batteries for use in Portable Applications
On July 31, 2023, the Standards Council of Canada (SCC) published an amendment revision for the standard CSA C22.2 No. 62133-2:20. It deals with safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications, particularly for lithium systems.
Comments were accepted until August 30, 2023.Safety
CB Scheme
8/3/2023
IECEE CB Scheme Adds New Standard ETSI 303 645 in Category CYBR
During the 2023 annual meeting, the CMC made decision 58/2022 which was related to the IECEE scheme's scope.
ETSI 303 645, a new CYBR standard, was included in the CB Scheme's scope.Safety
China
7/4/2023
China CQC Issues New Version of the Voluntary Certification Rules for Distribution Protection Appliances in Household and Similar Places
On July 4, 2023, the China Quality Certification Centre (CQC) issued a notice on the new version of CQC11-462143-2023 Certification Rules of Distribution Appliance for Household and Similar Uses to replace the old version of certification rules CQC11-462143-2019, involving CQC product category 012032, which became effective on July 10, 2023.Safety
Canada
7/31/2023
Canada SCC Publishes New Edition of CSA E60598-2-2 - Requirements for Luminaires and Recessed Air Handling Luminaires
On July 31, 2023, the Standards Council of Canada (SCC) published new edition of CSA E60598-2-2. This standard specifies the requirements for recessed luminaires and recessed air-handling luminaires.
Comments were accepted until August 30, 2023.Safety
Canada
7/31/2023
Canada SCC Publishes Amendment of Standards for Various Hand-Held Motor-Operated Electric Tools
On July 31, 2023, the Standards Council of Canada (SCC) published amendment revisions for the following standards:- CAN/CSA-C22.2 No. 60745-1-07 (R2022) - Hand-held Motor-operated Electric Tools - Safety - Part 1: General Requirements
- CSA C22.2 No. 62841-2-6:22 - Electric Motor-operated Hand-held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-6: Particular Requirements for Hand-held Hammers.
Comments were accepted until August 30, 2023.
Safety
Canada
7/31/2023
Canada SCC Publishes Amendment of CSA C22.2 No. 141 - Emergency Lighting Equipment
On July 31, 2023, the Standards Council of Canada (SCC) published an amendment revision for the standard CSA C22.2 No. 141. This standard deals with emergency lighting equipment.
Comments were accepted until August 30, 2023.
Official sourceSafety
Uganda
8/4/2023
Uganda UNBS Prepares Draft Standard DUS 2658: 2022 - Requirements for Gaming Equipment Finite Scratch Ticket and Pull-Tab Systems
On August 4, 2023, the Uganda National Bureau of Standards (UNBS) prepared draft standard DUS 2658:2022. This standard deals with requirements for finite scratch ticket and pull-tab systems.
Any comments on this draft standard can be sent to UNBS until October 3, 2023.Safety
Botswana
6/23/2023
Botswana BOBS Publishes Compulsory Standards Regulations 2023
On June 23, 2023, the Botswana Bureau of Standards (BOBS) published standards (compulsory standards) regulations of 2023.Safety
Global
8/4/2023
IEC Publishes New Standard IEC 63171-4:2022/COR1:2023 -
Specification for Shielded or Unshielded, Free and Fixed Connectors
On August 4, 2023, the International Electrotechnical Commission (IEC) released IEC 63171-4:2022/COR1:2023. This standard deals with connectors for electrical and electronic equipment particular for mechanical mating information, pin assignment and additional requirements for Type 4.Safety
India
8/9/2023
India DPIIT Issues Quality Control Order (QCO) for Electric Ceiling Type Fans
On August 9, 2023, the Department for Promotion of Industry and Internal Trade (DPIIT) published Electric Ceiling Type Fans (Quality Control) Order, 2023.Safety
Global
8/16/2023
IEC Publishes New Standard IEC 61076-8-105:2023 - Specification for 2-Pole Snap Locking Rectangular Power Connectors
On August 16, 2023, the International Electrotechnical Commission (IEC) released IEC 61076-8-105:2023. This standard lays down the detailed specification for 2-pole snap locking rectangular power connectors with plastic housing for 63 A rated current and 400 V rated voltage.Safety
Uganda
8/4/2023
Uganda UNBS Prepares Draft Standard DUS 2660:2022 - Requirements for Progressive Gaming Devices
On August 4, 2023, the Uganda National Bureau of Standards (UNBS) prepared draft standard DUS 2660:2022. This standard deals with requirements for progressive gaming devices.
Any comments on this draft standard can be sent to UNBS until October 3, 2023.Safety
Costa Rica
8/15/2023
Costa Rica INTECO Publishes Draft Standard PN INTE/IEC 62930:2023 - Electric Cables for Photovoltaic Systems with a Voltage Rating of 1,5 kV DC
On August 15, 2023, the Institute of Technical Standards of Costa Rica (INTECO) published draft standard PN INTE/IEC 62930:2023. It deals with electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC.Safety
Global
8/17/2023
IEC Publishes New Standard IEC 60939-2:2005/AMD1:2023 - Test Methods and General Requirements for Passive Filter Units
On August 17, 2023, the International Electrotechnical Commission (IEC) released IEC 60939-2:2005/AMD1:2023. This standard deals with test methods and general requirements of passive filter units for which safety tests are appropriate.
Official sourceSafety
Uruguay
8/14/2023
Uruguay Publishes Registration Procedure for Connection of Electric Vehicles and Plug-in Hybrid Electric Vehicles to the Electricity Grid
On August 14, 2023, the Ministry of Industry, Energy and Mining released a notification related to advances in the regulation and safety of the plug-in hybrid electric and electric vehicle market.Safety
Uganda
8/4/2023
Uganda UNBS Prepares Draft Standard DUS 2659:2022 - Requirements for Kiosks Gaming Equipment
On August 4, 2023, the Uganda National Bureau of Standards (UNBS) prepared draft standard DUS 2659:2022. This standard deals with requirements for kiosks gaming equipment.
Any comments on this draft standard can be sent to UNBS until October 3, 2023.Safety
Egypt
7/5/2023
Egypt MCI Publishes Ministerial Decree on the Implementation of the Standard ES 904:2023 - Safety Requirements for Vacuum Cleaners and Water-suction Cleaning Appliances
On July 5, 2023, the Ministry of Commerce and Industry of Egypt (MCI) published Ministerial Decree n. 197/2023 on the implementation of the standard ES 904:2023 which deals with safety requirements of vacuum cleaners and water-suction cleaning appliances.
Please contact your local UL Solutions office for more information.Safety
Costa Rica
8/18/2023
Costa Rica MEIC Publishes RTCR 510:2023 - Draft Regulation for Electrical Products, Series of Lights, Christmas Decorations and Figures
On August 18, 2023, the Ministry of Economy, Industry and Commerce published draft technical regulation RTCR 510:2023. This regulation deals with electrical products, series of lights, Christmas decorations and figures.
The deadline for submission of comments is on October 17, 2023.Safety
Egypt
7/5/2023
Egypt MCI Publishes Ministerial Decree on the Implementation of the Standard ES 8603:2023 - Electric Cables for Photovoltaic Systems
On July 5, 2023, the Ministry of Commerce and Industry of Egypt (MCI) published Ministerial Decree n. 196/2023 on the implementation of the standard ES 8603:2023 which applies to electric cables for photovoltaic systems.
Please contact your local UL Solutions office for more information.Safety
Egypt
7/5/2023
Egypt MCI Publishes Ministerial Decree on the Implementation of the Standard ES 8604-1:2023 - General Requirements for EV Charging Cables
On July 5, 2023, the Ministry of Commerce and Industry of Egypt (MCI) published Ministerial Decree n. 196/2023 on the implementation of the standard ES 8604-1:2023 which deals with the requirements of charging cables for electric vehicles.
Please contact your local UL Solutions office for more information.Safety
CB Scheme, Global
8/10/2023
IECEE Adds New Decision Sheets Related to ITAV Product Category on Week 33
On August 10, 2023, new decision sheets related to ITAV (Information Technology Audio Video) product category were uploaded on the IECEE website.- DSH 2200 - Capacitor discharge after disconnection of a connector
- DSH 2214 - Measurement of creepage distances and clearances
Safety
Australia, New Zealand
8/17/2023
Australia and New Zealand Prepare Draft DR AS/NZS 7176.31:2023 - Requirements and Test Methods of Lithium-ion Battery Systems and Chargers for Powered Wheelchairs
On August 17, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 7176.31:2023. This standard specifies requirements and test methods for lithium-ion batteries and battery systems intended for use in electrically powered wheelchairs and their charging systems.
The closing date for comments is on September 27, 2023.Safety
Australia, New Zealand
8/16/2023
Australia and New Zealand Prepare Draft DR AS/NZS 7176.25:2023 - Requirements and Test Methods Lead-acid Batteries and Chargers for Powered Wheelchairs
On August 16, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 7176.25:2023. This standard specifies requirements and test methods for lead-acid batteries and chargers for powered wheelchairs.
The closing date for comments is September 27, 2023.Safety
China
7/21/2023
China CQC Issues Notice on the Revised Applicable Standard and Certification Rules of Classifying the Blue Light Hazard of Lighting Products (CQC11-465001-2016)
On July 21, 2023, the China Quality Certification Centre (CQC) issued a notice on the second revision of the certification rules for classifying the blue light hazard of lighting products (CQC11-465001-2016) to apply to the applicable standards, involving CQC product category 010032, which became effective on the same day.Safety
China
7/26/2023
China CQC Issues Notice on the Revised Safety Certification Rules for Terminal Blocks (CQC11-462123-2021)
On July 26, 2023, the China Quality Certification Centre (CQC) issued a notice on the sixth revision of Safety Certification Rules for Terminal Blocks CQC11-462123-2021, involving CQC product category 012009, which became effective on August 1, 2023.Safety
Global, CB Scheme
8/8/2023
IECEE Adds New Decision Sheets Related to BATT Product Category on Week 33
On August 8, 2023, new decision sheets related to ITAV (Information Technology Audio Video) product category were uploaded on the IECEE website.- PDSH 2229 - Test voltage of insulation resistance test
- PDSH 2230 - Functional safety assessment of battery with BMS developed by third party
Safety
EU
8/25/2023
European Union CENELEC Publishes Amended Standard EN 60127-2:2014/A1:2023 - Cartridge Fuse-links
On August 25, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60127-2:2014/A1:2023 for miniature fuses - cartridge fuse-links.Safety
CB Scheme, Global
8/9/2023
IECEE Adds New Decision Sheets Related to Household Product Category on Week 33
On August 9, 2023, the new decision sheets related to HOUS (household and similar equipment) product category were uploaded on the IECEE website.- DSH 2190 - Evaluation of Y2 capacitors used as protective impedance
- DSH 2191 - Stand-by mode of a battery charger
- DSH 2198 - Testing lower levels for surge in 19.11.4.4
Safety
Argentina
8/17/2023
Argentina Ministry of Production Develops Amendments on Essential Safety Requirements for Low-voltage Electrical Products
On August 17, 2023, the Argentina's Ministry of Production released a draft document amending Resolution No. 169/2018 which specify the definition of "Suitable Use" and certification exception requirements for low-voltage electrical products that are marketed in the country. Changes include provisions regarding the mandated format when seeking exception from safety requirement, among others.
Provisions will come into force when the document is published in the official gazette.
Please contact your local UL Solutions office for more information.Safety
Mexico
8/16/2023
Mexico SE Announces Rejection of the Proposal for a General Criterion on Certification for Compliance with NOM-003-SCFI-2014
On August 16, 2023, the Secretary of Economy issued DGN
Criterion.191.01.2023.2199 which rejects the proposal for general criterion on certification for compliance with NOM-003-SCFI-2014.
Please contact your local UL Solutions office for more information.Safety
Somalia
8/13/2023
Somalia SOBS Issues Notice on CBCA Program Certificate of Conformity (CoC) Requirement for All Imported Goods
On August 13, 2023, the Somali Bureau of Standards (SoBS) issued a public notice about the Consignment-Based Conformity Assessment (CBCA) Program. Informing all companies, partners, traders, and importers of imported goods that do not meet the applicable requirements or lack a Certificate of Conformity (CoC) will be penalized starting September 1, 2023.Safety
Global, CB Scheme
8/9/2023
IECEE Adds New Decision Sheet Related to Tools Product Category on Week 33
On August 9, 2023, new decision sheet related to tools product category was uploaded on the IECEE website.- DSH 2186 - Adhesive label
Safety
Global, CB Scheme
8/9/2023
IECEE Adds New Decision Sheet Related to Household Product Category on Week 33
On August 9, 2023, new decision sheet related to HOUS (household and similar equipment) product category was uploaded on the IECEE website.- DSH 2199 - Thermal insulation to be encased in and in contact with 5VA polymeric material
Safety
EU
8/23/2023
European Union CEN Publishes Amended Standard EN 15194:2017+A1:2023 - Electrically Power Assisted Cycles (EPAC) Bicycles
On August 23, 2023, the European Committee for Standardization (CEN) published an amended standard EN 15194:2017+A1:2023 for electrically power assisted cycles (EPAC) bicycles.
The date of withdrawal of superseded version is August 23, 2025.Safety
Global, CB Scheme
8/8/2023
IECEE Adds New Decision Sheet Related to Cable Product Category on Week 33
On August 8, 2023, new decision sheet related to cable product category was uploaded on the IECEE website.- PDSH 2226 - Vertical flame propagation and smoke emission tests for muti-core cables
Safety
CB Scheme, Global
8/25/2023
IECEE Adds New Test Report Forms (TRFs) on Week 34
On August 25, 2023, the following TRFs were published and added to the IECEE website.
TRF No.
TRF Originator
IEC62040_1G
TÜV Rheinland Japan Ltd.
IEC60730_2_5F
UL Solutions (Demko)
IEC60335_2_42M
TSE Certification Center
EU_GD_IEC60335_2_85H_II
Nemko Group AS
EU_GD_IEC60335_2_42M
TSE Certification Center
CA_ND_IEC60825_1G
CSA Group
CA_ND_IEC61010_2_101D
CSA Group
JP_ND_IEC60601_1U
TÜV Rheinland Japan Ltd.
Safety
Australia
8/30/2023
Australia Announces General Guidance on Acceptance of IECEE CB Test Reports for Electrical Safety Certification
The Australian State regulators announced general guidance on acceptance of IECEE CB test reports for electrical safety certification. This document aims to provide information on suitability of IECEE CB test reports, particularly when testing in customer testing facilities (CTF) is used by the CB test laboratory.
The general guidance document limits certification to CTF1 and CTF2 only. CTF3 and CTF4 cannot be used as the basis of Australian electrical safety certifications.
This general guidance was effective on August 30, 2023.Safety, EMC
China
7/3/2023
China CQC Issues Notification on the Revised Implementation Rules of Lithium-ion Batteries and Other Products as well as Electronic Products and Safety Accessories for CCC Certification
On July 3, 2023, the China Quality Certification Centre (CQC) issued a notice regarding the new implementation rules CQC-C0901-2023 Compulsory Product Certification Implementation Rules for Electronics and Safety Accessories to align with CNCA implementation rules CNCA-C09-01:2023 which became effective on August 1, 2023.Safety, Performance
Global
7/27/2023
IEC Publishes New Standard IEC 60601-2-57:2023 - Requirements for the Basic Safety and Essential Performance of Non-laser Light Source Equipment
On July 27, 2023, the International Electrotechnical Commission (IEC) released IEC 60601-2-57:2023. This standard deals with medical electrical equipment particular for the requirements or the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring, cosmetic and aesthetic use.Safety, Performance
Lebanon
6/8/2023
Lebanon Publishes List of Mandatory Standards Related to Heating, Ventilation and Air Conditioning
On June 8, 2023, the Lebanese Council of Ministers issued Decision No. 27 approving, among others, Decree No. 11505. This Decree accords the status of legal obligation to national standard specifications related to heating, ventilation, and air conditioning.Safety, Wireless
Saudi Arabia
8/17/2023
Saudi Arabia SASO Prepares Draft Technical Regulation for Communications and Information Technology Equipment
On August 17, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) prepared a draft technical regulation for communications and information technology equipment.
The regulation covers the following main topics.- Obligations of the supplier
- Marking Requirements
- Conformity Assessment Procedures
- Responsibilities of the Supervisory Bodies
- Violations and Penalties
- Transitional Provisions
- Annex 2: Unification of power charging outlet
Comments and feedback can be sent until October 16, 2023.
Safety, Wireless
Switzerland
8/17/2023
Switzerland OFCOM Revises Technical Requirements Regarding Telecommunications Installations
On August 17, 2023, the Federal Office of Communications (OFCOM) released draft revisions for the Ordinance on Telecommunications Installations (OIT) and of the Ordinance of the Swiss Federal Office of Communications on Telecommunications Installations (OOIT), respectively. These documents specify the basic technical requirements on telecommunications installations. This revision specifically establishes requirement provisions for charging technology for radio equipment. This shall harmonize the Swiss law with Directive (EU) 2022/2380.Sanitation
EU
8/11/2023
European Union EC Publishes Regulation Amending Annex I to Regulation (EU) No 10/2011 to Authorize the Use of a New Substance in Plastic Food Contact Materials
On August 11, 2023, the European Commission (EC) published Commission Regulation (EU) 2023/1627 of 10 August 2023 amending Annex I to Regulation (EU) No 10/2011 as regards the authorization of the substance bis(2-ethylhexyl)cyclohexane-1,4-dicarboxylate (FCM No 1079).
This Regulation specifies the amendment on rules for plastic materials and articles intended to come into contact with food.Sanitation
EU
7/18/2023
European Union EC Announces Initiative to Restrict Bisphenol A (BPA) and Other Bisphenols in Food Contact Materials
On July 18, 2023, the European Commission (EC) announced an initiative related to restrictions on bisphenol A (BPA) and other bisphenols in food contact materials.
This initiative is intended to ban the use of BPA in food contact materials (FCMs), including plastic and coated packaging, and follows the publication of the European Food Safety Authority’s opinion, indicating a concern for human health.Sustainability
France
8/2/2023
France MoET Publishes Draft Decree on Durability Index of Electrical and Electronic Equipment to Replace the Repairability Index
On August 2, 2023, the Ministry of Ecological Transition of France published a draft Decree on durability index of electrical and electronic equipment.
This draft Decree:- defines the modalities of application of Article L. 541-9-2 of the Environmental Code, which provides for the implementation of a durability index for certain categories of electrical and electronic equipment; and
- specifies the criteria and parameters of the calculation used to establish this index and the general framework of the obligations concerning its communication and display.
Feedback is accepted until November 3, 2023.
Sustainability
France
8/2/2023
France MoET Publishes Draft Order on Display Methods, Signage and General Parameters for Calculating Durability Index of Electrical and Electronic Equipment
On August 2, 2023, the Ministry of Ecological Transition of France published a draft Order on display methods, signage and general parameters for calculating the durability index of electrical and electronic equipment.
This draft Order:- sets the terms of display, signage and general parameters for calculating the durability index;
- applies to all equipment subject to a calculation and display of the durability index according to the provisions of Articles R. 541-234 to R. 541-238 of the Environmental Code (new articles established by draft Decree relating to the durability index of electrical and electronic equipment).
Feedbacks are accepted until November 3, 2023.
Sustainability
France
8/2/2023
France MoET Publishes Draft Orders on Criteria, Sub-criteria and Rating System for Calculating and Displaying Durability Index of Specific Products
On August 2, 2023, the Ministry of Ecological Transition of France published three draft Orders on criteria, sub-criteria and rating system for calculating and displaying the durability index of multifunction mobile phones, household washing machines and television sets.
Feedback is accepted until November 3, 2023.Sustainability
Australia
7/14/2023
Australia ACCC Releases Public Consultation on Environmental and Sustainability Guidance
On July 14, 2023, the Australian Competition and Consumer Commission (ACCC) released a public consultation on environmental and sustainability guidance to explain the obligations under the Australian Consumer Law (ACL) which businesses must comply with when making environmental and sustainability claims.
This public consultation closes on September 15, 2023.Sustainability
United Kingdom
7/28/2023
United Kingdom DEFRA Publishes Draft Consultation on Producer Responsibility Obligations (Packaging and Packaging Waste) Regulations 2024
On July 28, 2023, the Department for Environment, Food and Rural Affairs (DEFRA) published a draft consultation on Producer Responsibility Obligations (Packaging and Packaging Waste) Regulations 2024.
These Regulations impose requirements on producers who are established in the United Kingdom in relation to the packaging they supply, requiring certain producers to meet recycling obligations and to pay for the collection and disposal costs of their packaging when it becomes household packaging waste or binned packaging.
This public consultation will close on October 9, 2023.Sustainability
France
8/24/2023
France Ministry of Ecological Transition Publishes Draft Decree on Devices Intended to Collect Microplastics for Washing Machines
On August 24, 2023, the Ministry of Ecological Transition of France published a draft Decree related to methods and terms of application of the provisions related to devices intended to collect microplastics for washing machines for domestic and professional use.
Feedback is accepted until November 27, 2023.Sustainability
France
8/24/2023
France Ministry of Ecological Transition Publishes Draft Order on Specifications for Microplastic Collection Devices for Professional Washing Machines
On August 24, 2023, the Ministry of Ecological Transition of France published a draft Order laying down specifications for microplastic collection devices for professional washing machines which, according to article 79 of Law No 2020-105 of 10 February 2020 on the fight against waste and the circular economy ("AGEC Law"), from 1 January 2025, shall be equipped with a microplastic collection devices.
Feedback is accepted until November 27, 2023.Sustainability
France
8/24/2023
France Ministry of Ecological Transition Publishes Draft Order of the Specifications for Microplastic Collection Devices for Domestic Washing Machines
On August 24, 2023, the Ministry of Ecological Transition of France published a draft Order laying down specifications for microplastic collection devices for Household washing machines which, according to Article 79 of Law No 2020-105 of 10 February 2020 on the fight against waste and the circular economy ("AGEC Law"), from January 1, 2025, shall be equipped with a microplastic collection devices.
Feedback is accepted until November 27, 2023.Wireless
Canada
7/5/2023
Canada ISED Publishes Technical Requirements for the Flexible Use Broadband Equipment Operating in the Band 3450-3900 MHz
On July 5, 2023, the Innovation, Science and Economic Development (ISED) published RSS-192, Issue 5 – Flexible Use Broadband Equipment Operating in the Band 3450-3900 MHz.Wireless
Canada
7/11/2023
Canada ISED Publishes Draft Technical Requirements for Non-Competitive Local Licensed Services, including Fixed and/or Mobile Systems, and Flexible Use Broadband Systems, in the Band 3900 – 3980 MHz
On July 11, 2023, the Innovation, Science and Economic Development (ISED) opened a public consultation on ISED Standard Radio System Plan SRSP-521, Technical Requirements for Non-Competitive Local Licensed Services, including Fixed and/or Mobile Systems, and Flexible Use Broadband Systems, in the Band 3900 – 3980 MHz.
Comments were accepted until September 8, 2023.Wireless
Canada
7/13/2023
Canada ISED Publishes Draft Technical Requirements for Wireless Broadband Services (WBS) in the Band 3650-3700 MHz
On July 13, 2023, the Innovation, Science and Economic Development (ISED) opened a public consultation on ISED Standard Radio System Plan SRSP-303.65, Technical Requirements for Wireless Broadband Services (WBS) in the Band 3650-3700 MHz.Comments were accepted until August 11, 2023.
Wireless
South Korea
7/17/2023
South Korea RRA Opens Public Consultation on 2 New Broadcasting and Communication Standards
On July 17, 2023, the South Korean National Radio Research Agency (RRA) opened a public consultation under Notice No. 2023-57 on the enactment of 2 new broadcasting and communication standards.- Emergency Rescue Request Smartphone User Interface
- IoT-based Firefighting Facility Management System General Requirements
Comments are accepted until September 15, 2023.
Wireless
Japan
7/15/2023
Japan Land Radio Communications Commission Publishes Draft Technical Conditions for Broadband Wireless LAN and for Advanced Use of Wireless LAN Systems
On July 15, 2023, the Land Radio Communications Commission of Japan published Terrestrial Radiocommunication Committee Report on the Draft Technical Requirements for Introduction of Broadband Wireless LAN and Advanced Wireless LAN System Technical Conditions. Opinions were accepted until August 19, 2023.Wireless
Canada
7/20/2023
Canada ISED Publishes Technical Requirements for Broadband Radio Service (BRS) Equipment Operating in the 2500-2690 MHz Band
On July 20, 2023, the Innovation, Science and Economic Development (ISED) of Canada published Radio Standards Specification RSS-199, Issue 4 - Broadband Radio Service (BRS) Equipment Operating in the Band 2500-2690 MHz.Wireless
El Salvador
6/8/2023
El Salvador SIGET Updates CNAF to Allocate 6GHz Frequency Band for Wi-Fi Use
On June 8, 2023, the General Superintendence of Electricity and Telecommunications (SIGET) published Resolution No. T-0408-2023 which updates the National Frequency Allocation Table (CNAF) to allocate the 5925-7125 MHz frequency band.
Please contact your local UL Solutions office for more information.Wireless
Costa Rica
7/9/2023
Costa Rica SUTEL Publishes Draft Allocation for 5G Spectrum
On July 9, 2023, the Superintendence of Telecommunications (SUTEL) opened Public Consultation Tender No. 2023Lx-00000x-SUTEL related to concession for the use and exploitation of radio spectrum for the provision of telecommunications services through the implementation of systems of International Mobile Telecommunications (IMT), including 5G.
Comments were accepted until July 24, 2023.
Please contact your local UL Solutions office for more information.Wireless
Indonesia
7/17/2023
Indonesia SDPPI Releases Further Provisions on SAR Testing Plan
On July 17, 2023, the Directorate General of Resources and Equipment of Post and Information Technology (SDPPI) formally released the possible scope of the planned mandatory SAR testing for telecommunication devices. Enforcement is planned in the fourth quarter of 2023.Wireless
Singapore
7/26/2023
Singapore IMDA Announces Cessation of Equipment Registration and Sales of 3G-only Mobile Terminals and Non-VoLTE Capable Phones
On July 26, 2023, the Infocomm Media Development Authority (IMDA) of Singapore announced the cessation of equipment registration and sales of 3G-only mobile terminals and non-VoLTE (Voice over Long Term Evolution) capable mobile/smart phones.Wireless
Israel
7/25/2023
Israel MOC Releases Procedure for Receiving Shipping Companies to Test Wireless Communication Equipment
On July 25, 2023, the Israel's Ministry of Communications (MOC) released procedure for receiving shipping companies to test wireless communication equipment. This procedure is only applicable to shipping companies dealing with the release of personal imported wireless communication equipment.Wireless
Laos
7/21/2023
Laos MTC Publishes Updates on Type Approval and Labeling Requirements
On July 21, 2023, the Ministry of Technology and Communication (MTC) of Laos published Notice No. 0416 related to principles and implementation of laws and regulations regarding technical standards of telecommunications and ICT equipment.Wireless
Kenya
7/24/2023
Kenya Communications Authority Remains Operational Amidst Political Unrest
Kenya's Communications Authority (CAK) remains open amidst the current political situation in their country. This, however, may hinder the functioning of the administrations at any time.
Please contact your local UL Solutions office for more information.Wireless
Oman
7/27/2023
Oman TRA Opens Public Consultation on the Annexes of Regulation for Registration of Radio Equipment and Utilization of Frequencies
On July 27, 2023, the Telecommunications Regulatory Authority (TRA) of Oman opened a public consultation on the 11 annexes related to the Registration and Utilization of Frequencies and Radio Equipment and Their Pricing.
Comments were accepted until August 10, 2023.Wireless
Brazil
8/3/2023
Brazil Anatel Publishes Draft Technical and Operational Requirements for the Use of Frequency Bands Associated with Services of Collective Interest
On August 3, 2023, the National Telecommunications Agency (Anatel) opened Public Consultation No. 39 Technical and Operational Requirements for the Use of Frequency Bands Associated with Services of Collective Interest, provided by Terrestrial Systems.
Comments are accepted until September 17, 2023.Wireless
Nicaragua
7/31/2023
Nicaragua TELCOR Announces Completion of Migration in the 900 MHz Band and Its Allocation to Mobile Broadband
On July 31, 2023, the Nicaraguan Institute of Telecommunications and Posts (TELCOR) issued Administrative Agreement No. 001-2023 through the official gazette regarding the provisions on the 894-960 MHz (900 MHz) band.Wireless
Canada
8/9/2023
Canada ISED Publishes Technical Requirements of Flexible Use Broadband Equipment Operating in the Band 3900-3980 MHz
On August 9, 2023, the Innovation, Science and Economic Development Canada (ISED) published RSS-198, Issue 1 Flexible Use Broadband Equipment Operating in the Band 3900-3980 MHz.Wireless
Mexico
8/4/2023
Mexico IFT Opens Public Consultation on Draft Guidelines for the Use of the IFT Seal on Approved Telecommunications Equipment
On August 4, 2023, the Mexico Federal Telecommunications Institute (IFT) published Draft Guidelines for the Use of the IFT Seal of the Federal Institute of Telecommunications in Approved Products, Equipment, Devices for Telecommunications or Broadcasting.
Comments are accepted until October 2, 2023.Wireless
Palestine
8/6/2023
Palestine MTIT Publishes Guidelines for the Use of Frequencies within SRD
On August 6, 2023, the Ministry of Telecom and Information Technology (MTIT) of the State of Palestine published Guidelines for Using Frequencies within Short-range Devices (SRD).
Please contact your local UL Solutions office for more information.Wireless
New Zealand
8/10/2023
New Zealand RSM Announces Allocation of 24–30 GHz Spectrum Range
On August 10, 2023, the New Zealand Radio Spectrum Management (RSM) announced the initial allocation decisions on the 24–30 GHz spectrum range.Wireless
Malaysia
8/23/2023
Malaysia SIRIM Announces Processing Fee for IT/Networking Applications and Evaluation Fee for Internal Radio Frequency Test Reports
On August 23, 2023, the Standard and Industrial Research Institute of Malaysia (SIRIM) issued Announcement Reference No. SQASI/CMCS/1/23/0008 on the Introduction of a Processing Fee for Information Technology (IT)/Networking Applications and Evaluation Fee for Internal Radio Frequency (RF) Test Reports.Wireless, EMC, Safety
Armenia
7/20/2023
Armenia Government Amends Technical Regulation for Radio Equipment and Telecommunication Terminal Equipment
On July 20, 2023, the Government of the Republic of Armenia published Decision No. N 1200-Н amending the Resolution No. 2228 on Approving the Technical Regulation of Radio Equipment and Telecommunication Terminal Equipment.- August 2023 updates
Regulation Country Published Date Summary Toys
Global
8/4/2023
ISO Published New Version of ISO 8124-6 Safety of toys — Part 6: Certain phthalate esters
The International Organization for Standardization (ISO) has published new version of ISO 8124-6:2023 Safety of toys — Part 6: Certain phthalate esters.
This document specifies a method standard for the determination of di-iso-butyl phthalate (DIBP), di-n-butyl phthalate (DBP), benzyl-butyl phthalate (BBP), bis-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DNOP), di-iso-nonyl phthalate (DINP) and di-iso-decyl phthalate (DIDP) in toys. It can also be applied to other phthalate esters if adequate validation is demonstrated.
This document applies to toys made of plastics, textiles, coatings and liquids. This document has been validated for polyvinylchloride (PVC) and polyurethane (PU) plastics and some representative paint coatings.Chemicals
Europe
8/30/2023
Germany Withdraws Restriction Proposal for Bisphenols
The German authorities have withdrawn their proposal to restrict bisphenols.
The withdrawn proposal aims to restrict the placing on the market of mixtures and articles where the bisphenols concentration is equal to or greater than 10 ppm (0.001 % by weight).
They intend to re-submit an updated proposal to ECHA once they have considered the information submitted by stakeholders during the six-month consultation and reworked the scope of the restriction.Food Contact Materials
Europe
9/1/2023
Turkey Drafts Food Codex Communiqué on Plastic Materials and Articles in Contact with Food
Turkey drafts Communiqué to amend the Turkish Food Codex Communiqué on Plastic Materials and Articles in Contact with Food in line with the amendments 2020/1245/EU and 2023/1442/EU of the EU regulation 10/2011/EU.
This amendment covers revisions of some monomers and starting substances to be used in the production of food contact plastic materials and articles and changes to migration test rules
The amendments made in this Communiqué apply until January 1, 2026. Products that do not comply with these changes, but which were placed on the market before January 1, 2026, may be available until January 1, 2028.Food Contact Materials, Juvenile Products
Europe
8/9/2023
CEN Issues EN 14350:2020+A1:2023 Child care articles - Drinking equipment - Safety requirements and test methods
The European Committee for Standardization (CEN) has issued EN 14350:2020+A1:2023 Child care articles - Drinking equipment - Safety requirements and test methods.
This document specifies safety requirements relating to the materials, construction, performance, packaging and product information for drinking equipment intended for children of 0 to 48 months of age:- Re-usable containers and re-usable drinking accessories;
- Single-use containers and drinking accessories sold with these containers;
- Single-use feeding teats;
- Ready to use feeding teats.
Toys
Global
8/4/2023
ISO Publishes ISO 8124-12:2023 Safety of toys — Part 12: Microbiological safety
The International Organization for Standardization (ISO) has published ISO 8124-12:2023 Safety of toys — Part 12: Microbiological safety.
ISO 8124-12:2023 specifies acceptable criteria for microbiological cleanliness and adequacy of preservation of the specified toy materials. ISO 8124-12:2023 applies to all toys that are, contain or are supplied with aqueous materials (e.g. paste, putty, liquid or gel). In addition, this document applies to toys that are or include a cosmetic (including those intended for use on a toy as well as on the child). Powders and similar substances intended to be mixed with water are also within the scope of this document.Juvenile Products
U.S.A.
8/16/2023
U.S. CPSC Bans Use of Inclined Sleepers for Infants
The Consumer Product Safety Commission is issuing this final rule to codify in its regulations the ban of inclined sleepers for infants pursuant to the Safe Sleep for Babies Act of 2021, which requires that inclined sleepers for infants, regardless of the date of manufacture, shall be considered a banned hazardous product under the Consumer Product Safety Act.
The final rule codifies the definition of "inclined sleeper for infants'' as a product with an inclined sleep surface greater than ten degrees that is intended, marketed, or designed to provide sleeping accommodations for an infant up to 1 year old.Juvenile Products
U.S.A.
8/14/2023
U.S. CPSC Bans Use of Crib Bumpers
The Consumer Product Safety Commission is issuing this final rule to codify the ban of crib bumpers pursuant to the Safe Sleep for Babies Act of 2021, which requires that crib bumpers, regardless of the date of manufacture, shall be considered a banned hazardous product under the Consumer Product Safety Act.
A crib bumper is defined as any material that is intended to cover the sides of a crib to prevent injury to any crib occupant from impacts against the side of a crib or to prevent partial or complete access to any openings in the sides of a crib.Chemicals
Paraguay
6/19/2023
Paraguay: MIC Publishes Resolution on Process of Importing, Manufacturing, Assembling and Marketing of Primary Batteries for Domestic Use
On June 19, 2023, the Ministry of Industry and Commerce published Resolution No. 673/2023, Process of Importing, Manufacturing, Assembling and Marketing of Primary Batteries for Domestic Use Established in Law No. 5.882/2017 of Integral Management of Batteries and Batteries for Domestic Use.
Official sourceChemicals
EU
7/14/2023
European Union: EC Adopts Regulation on Mercury Regarding Mercury-Added Products Subject to Manufacturing, Import and Export Restrictions
On July 14, 2023, the European Commission (EC) adopted a proposal for a regulation of the European Parliament and of the Council amending Regulation (EU) 2017/852 of the European Parliament and of the Council of 17 May 2017 on mercury regarding dental amalgam and other mercury-added products subject to manufacturing, import and export restrictions.
Feedback is accepted until Sept. 8, 2023.Chemicals, Performance
EU
7/14/2023
European Union: CENELEC Publishes Corrigendum Standard EN IEC 60086-3:2021/AC:2023-07 for Primary Batteries for Watches
On July 14, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard, EN IEC 60086-3:2021/AC:2023-07, for primary batteries for watches.Chemicals, Safety, Sustainability
EU
6/28/2023
European Union Adopts New Regulation on Batteries and Waste Batteries
On June 28, 2023, the Council of the EU adopted a new regulation on batteries and waste batteries. The legislation will regulate the entire life cycle of batteries — from production to reuse and recycling — to help ensure that they are safe, sustainable and competitive.
The vote by the Council closes the adoption procedure; the regulation will now be signed by the Council and the European Parliament. It will then be published in the EU’s Official Journal and enter into force 20 days thereafter.Cyber Security
China
4/17/2023
China: CAC Issues Announcement for Adjusting the Relevant Matters of Security Management for Specialized Network Security Products
On April 17, 2023, the Cyberspace Administration of China (CAC), together with the Ministry of Industry and Information Technology (MIIT), Certification and Accreditation Administration of the P.R.C (CNCA) and Public Security Bureau (PSB), published and released Announcement No. 1 of 2023, Adjusting the Relevant Matters of Security Management for Network Security Products based on the Cybersecurity Law of the People’s Republic of China and Announcement No. 1 of 2017 Catalogue of Network Critical Equipment and Specialized Network Security Products (First Batch), which was effective from July 1, 2023.Cyber Security
China
7/4/2023
China: MIIT Publishes Announcement to Adjust Catalogue of Network-Critical Equipment and Specialized Network Security Products
On July 4, 2023, the Ministry of Industry and Information Technology (MIIT) published Announcement No. 2 of 2023 for Adjusting Catalogue of Network Critical Equipment and Specialized Network Security Products, which was effective on the same day.EMC
China
5/4/2023
China: CQC Issues Notice on the Implementation of New EMC Standard GB 17625.1 for the CQC Voluntary Certification of Electronic Products and Accessories
On May 4, 2023, the China Quality Certification Centre (CQC) issued Notice on the Implementation of the Relevant Requirements of the New Standard GB 17625.1-2022 for electronic products and their accessories (001018/001121) involving the revision of the CQC voluntary certification rules CQC12-045670-2022 and CQC12-045800-2022.EMC
EU
6/30/2023
European Union: CENELEC Publishes New Standard, EN IEC 61543:2023, for Household Residual Current-Operated Protective Devices (RCDs)
On June 30, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 61543:2023, for household residual current-operated protective devices’ electromagnetic compatibility.
The date of withdrawal of the superseded version is April 19, 2026.EMC
EU
6/30/2023
European Union: CENELEC Publishes Amended Standard EN IEC 61543:2023/A11:2023 for Household Residual Current-Operated Protective Devices (RCDs)
On June 30, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 61543:2023/A11:2023, for household residual current-operated protective devices’ electromagnetic compatibility.EMC
Saudi Arabia
7/4/2023
Saudi Arabia: SASO Prepares Draft Technical Regulations for Electromagnetic Compatibility
On July 4, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) prepared a draft technical regulation for electromagnetic compatibility.
Comments and feedback can be submitted until Sept. 2, 2023.EMC
Taiwan
7/12/2023
Taiwan: BSMI Publishes Updated List of Recognized EMC Testing Laboratories in Foreign Countries (June 2023 Update)
On July 12, 2023, the Bureau of Standards, Metrology and Inspection (BSMI) published its List of EMC Testing Laboratories Recognized by the BSMI in Foreign Countries, updated June 27, 2023.EMC
EU
7/14/2023
European Union: CENELEC Publishes New Standard, EN IEC 62822-3:2023, for Electric Resistance Welding Equipment
On July 14, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 62822-3:2023, Electric Resistance Welding Equipment – Assessment of Restrictions Related to Human Exposure to Electromagnetic Fields (0 Hz to 300 Hz) – Part 3: Resistance Welding Equipment.
The date of withdrawal of the superseded version is July 5, 2026.EMC, Energy Efficiency, RoHS, Safety, Wireless, Chemicals
Serbia
7/17/2023
Serbia: RATEL Opens Public Consultation on Radio Frequency Band Plan
On July 17, 2023, the Regulatory Agency for Electronic Communications and Postal Services (RATEL) of Serbia opened a public consultation on its revision of Draft Proposal for the Plan for the Use of Radio Frequency Bands.
Comments were accepted until Aug. 17, 2023.EMC, Energy Efficiency, Safety
Global, CB Scheme
6/29/2023
IEC Publishes New Standard, IEC 60068-3-4:2023, Providing Guidance for Damp Heat Tests
On June 29, 2023, the International Electrotechnical Commission (IEC) released IEC 60068-3-4:2023. This standard deals with supporting documentation and guidance for damp heat tests.EMC, Energy Efficiency, Safety
EU
7/12/2023
European Union: CENELEC Publishes New Standard, EN ISO 80601-2-72:2023, for Home Healthcare Environment Ventilators
On July 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN ISO 80601-2-72:2023, Medical Electrical Equipment – Part 2-72: Particular Requirements for Basic Safety and Essential Performance of Home Healthcare Environment Ventilators for Ventilator-Dependent Patients.
The date of withdrawal of the superseded version is Jan. 31, 2024.EMC, Energy Efficiency, Safety
EU
7/14/2023
European Union: CENELEC Publishes New Standard, EN IEC 60794-1-1:2023, for Optical Fiber Cables
On July 14, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60794-1-1:2023, Optical Fibre Cables – Part 1-1: General Specification – General.
The date of withdrawal of the superseded version is June 26, 2026.EMC, Performance, Safety, Wireless
India
7/3/2023
India: TEC Exempts Parameters for Optical Fiber (Single-Mode) and Optical Fiber Cable Under MTCTE Scheme
On July 3, 2023, the Telecommunication Engineering Centre (TEC) published Notification No. 5-5/2021-TC/TEC regarding the exemption pertaining to essential requirements (ERs) of optical fiber (single-mode) and optical fiber cable under the Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.EMC, Safety
Japan
6/12/2023
Japan: METI Updates EMC and Electrical Safety Standards for Electric Appliances and Machinery
On June 12, 2023, the Ministry of Economy, Trade and Industry (METI) opened a public consultation for a partial revision of the Interpretation of Ministerial Ordinances Establishing Technical Standards for Electrical Appliances and Materials under proposal 595123046. Revisions include modifications to assigned standards for electric heating appliances, electric-powered applied machinery, light sources, AC electrical equipment, portable generators and radio noise standards for lighting. A guide for Japanese Industrial Standards (JIS) that conforms to corresponding international standards (such as IEC standards) is also listed.
The consultation was closed on July 11, 2023.EMC, Safety
China
6/30/2023
China: CNCA Issues New CCC Certification Implementation Rules for Electronic Products and Safety Accessories (CNCA-C09-01:2023)
On June 30, 2023, the Certification and Accreditation Administration of the People’s Republic of China (CNCA) issued Announcement No. 10 of 2023 regarding the new Compulsory Product Certification Implementation Rules for Electronics and Safety Accessories CNCA-C09-01:2023, which was effective from Aug. 1, 2023.EMC, Safety, Cyber Security, Performance
China
5/23/2023
China: SAC Publishes 535 Recommended National Standards and 2 National Standards Revisions, Including a Part for Electrical and Electronic Equipment
On May 23, 2023, the Standardization Administration of China (SAC) of the State Administration for Market Regulation of the People's Republic of China (SAMR) published Announcement No. 2 of 2023 to approve 535 recommended national standards and two national standard revisions for a wide range of products and materials, including various electrical and electronic products like electrical components, IT products, tools and industrial products, etc.
These standards are about safety and electromagnetic compatibility (EMC) performance requirements and cybersecurity requirements, etc., with different implementation dates.EMC, Safety, Energy Efficiency, RoHS, Chemicals
Taiwan
6/21/2023
Taiwan: BSMI Publishes Latest Certification Information Booklet Version 1.83
On June 21, 2023, the Bureau of Standards, Metrology and Inspection (BSMI) published the latest Taiwan Commodity Inspection Schemes for Electrical and Electronic Products (Conformity Assessment) Information Booklet Version 1.83, which guides interested parties on updating the recognition status of foreign testing laboratories under recognized testing laboratories related to BSMI certification.EMC, Wireless
South Korea
6/30/2023
South Korea: RRA Publishes Partial Revision of EMC Standard
On June 30, 2023, the South Korean National Radio Research Agency (RRA) published a partial revision of its electromagnetic compatibility standard under National Radio Research Agency Notice No. 2023-13.EMC, Wireless
South Korea
6/30/2023
South Korea: RRA Publishes Partial Revision of Equipment that Does Not Require Radio Wave Application Permission Other than Communication Equipment
On June 30, 2023, the South Korean Ministry of Science and ICT (MSIT) published a partial revision of Facilities and Devices that Do Not Require Permission Among Radio Wave Application Facilities Other than Communication Facilities under Ministry of Science and ICT Notice No. 2023-22.EMC, Wireless
South Korea
6/30/2023
South Korea: RRA Makes WPT for Electric Vehicles Subject to Electromagnetic Wave Strength and Absorption Rate Measurement
On June 30, 2023, the South Korean National Radio Research Agency (RRA) published a partial revision of Equipment Subject to Measurement of Electromagnetic Wave Strength and Electromagnetic Wave Absorption Rate under National Radio Research Agency Notice No. 2023-12.EMC, Wireless
Canada
6/28/2023
Canada: ISED Publishes Draft Adoption of ANSI C63.10-2020 and C63.25.1-2018
On June 28, 2023, Canada’s Innovation, Science and Economic Development (ISED) department opened public consultation on the following standards:- ANSI C63.10-2020, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices, modified per ANSI C63.10-2020/Cor 1-2023
- ANSI C63.25.1-2018, American National Standard Validation Methods for Radiated Emission Test Sites, 1 GHz to 18 GHz
EMC, Wireless
EU
6/30/2023
European Union: CENELEC Publishes Amended Standard EN IEC 55036:2020/A1:2023 for Electric and Hybrid Electric Road Vehicles
On June 30, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 55036:2020/A1:2023, Electric and Hybrid Road Vehicles – Radio Disturbance Characteristics – Limits and Methods of Measurement for the Protection of Off-Board Receivers Below 30 MHz.EMC, Wireless
Canada
7/8/2023
Canada: ISED Publishes Draft Technical Requirements for the Compliance of Interference-Causing Equipment
On July 8, 2023, Canada’s Innovation, Science and Economic Development (ISED) department opened public consultation on ICES-Gen Issue 2: General Requirements for Compliance of Interference-Causing Equipment.
Comments can be submitted until Sept. 20, 2023.EMC, Wireless
Australia
5/25/2023
Australia: ACMA Updates Supplier’s Declaration of Conformity Form
On May 25, 2023, the Australian Communications and Media Authority (ACMA) updated the supplier’s declaration of conformity (SDoC) form.Energy Efficiency
Philippines
6/20/2023
Philippines: DOE Announces Commencement of PELP Online Company Registration for Manufacturers, Importers and Distributors of Electric Fans and Clothes Washing Machines
On June 20, 2023, the Department of Energy (DOE) announced commencement of online company registration for manufacturers, importers and distributors of electric fans and clothes washing machines.Energy Efficiency
Israel
7/27/2023
Israel: MoE Publishes Import Reform Repealing Energy Source Regulations for Electrical Appliances
On June 27, 2023, the Ministry of Energy (MoE) published a reform for the import of electrical appliances in the records of the cancellation of regulations on energy sources.Energy Efficiency
Saudi Arabia
7/6/2023
Saudi Arabia: SASO Extends Scope of UL-CCIC and UL Italia for Mandatory Standard SASO 3029:2023 Containing Energy and Water Performance Requirements for Electric Dishwashers
On July 6, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) extended the scope of UL-CCIC Company Limited for mandatory standard SASO 3029:2023 for energy and water performance and label requirements of electric dishwasher products.
Please contact your local UL Solutions office for more information.Energy Efficiency
Peru
6/29/2023
Peru: MEM Authorizes Publication of Draft Technical Regulation on the Minimum Energy Efficiency Standard (MEPS) for Domestic Lighting Sources
On June 29, 2023, the Ministry of Energy and Mines authorized the publication of the draft Supreme Decree Approving the Technical Regulation on the Minimum Energy Efficiency Standard for Sources of Household Lighting and Similar Uses for General Lighting.
Interested parties may submit their opinions, comments and/or suggestions until Aug. 29, 2023.Energy Efficiency
Malaysia
6/27/2023
Malaysia: SIRIM Announces Mandatory Inspection of Energy Efficiency (MEPS) Labeling During Consignment Inspection
On June 27, 2023, the Suruhanjaya Tenaga (ST) ordered SIRIM QAS Consignment Lab to inspect the energy efficiency labeling of regulated electrical appliances during consignment inspection, effective immediately.Energy Efficiency
Costa Rica
7/19/2023
Costa Rica: INTECO Publishes New Draft Standard, PN INTE E82-1:2023, Containing Energy Efficiency Requirements for Heat Pumps
On July 19, 2023, the Institute of Technical Standards of Costa Rica (INTECO) published PN INTE E82-1:2023. This standard deals with energy requirements of heat pumps for space heating and cooling and process chillers.
The PN INTE E82-1:2023 draft standard was open for public consultation until Aug. 13, 2023.Energy Efficiency
Chile
7/19/2023
Chile: SEC Releases Draft Energy Efficiency Protocol Update for Air
Conditioners
On July 19, 2023, the Superintendency of Electricity and Fuels (SEC) published draft protocol PE No. 1/26/2:2023, which deals with the energy efficiency protocol for air conditioners.
Comments may be submitted until Sept. 17, 2023.Energy Efficiency
China
6/26/2023
China: SAMR Issues Draft Energy Efficiency Standard for Cold Storage (Boxes) and Refrigerant Compressor Condensing Units
On June 26, 2023, the State Administration for Market Regulation (Standardization Administration of the P.R.C.) issued through WTO Notification G/TBT/N/CHN/1729 the draft standard (GB/T XXXXX—20XX) for the minimum allowable values of energy efficiency and energy efficiency grades for cold storage (boxes) and refrigerant compressor condensing units. This standard aims to eliminate high
energy-consuming products for environmental protection.
The final date for comments is Aug. 24, 2023.Energy Efficiency
Taiwan
7/10/2023
Taiwan: BOE Issues Energy Efficiency Requirements for Energy Saving Label of Non-Ducted Air Conditioners with Interconnection Protocols
On July 10, 2023, the Bureau of Energy (BOE) of the Ministry of Economic Affairs (MOEA) issued a regulation concerning energy efficiency criteria and labeling methods for energy label qualifications for non-ducted air conditioners with interconnection protocols, which will be effective from Jan. 1, 2025.Energy Efficiency
Taiwan
7/10/2023
Taiwan: BOE Issues Revision on Energy Efficiency Requirements for Energy Saving Labels for Air Cleaners (Purifiers)
On July 10, 2023, the Bureau of Energy (BOE) of the Ministry of Economic Affairs (MOEA) issued Order No. 11205005710 for the revision of Energy Efficiency Criteria and Labeling Method for Energy Label Qualified Air Cleaners. This order revised regulations on the energy efficiency benchmark and added common requirements for the energy label certification of air cleaners (purifiers), and will be effective from July 17, 2025.Energy Efficiency
USA
7/26/2023
USA: DOE Publishes Final Rule for Energy Test Procedure for Dehumidifiers
On July 26, 2023, the U.S. Department of Energy (DOE) published a final rule for its test procedure for dehumidifiers.
The changes are as follows:- Amends the test procedure for dehumidifiers to reference the current version of an applicable industry standard
- Changes the test rating period
- Provides additional specifications for testing dehumidifiers with network capabilities
Energy Efficiency, Performance
Kuwait
7/10/2023
Kuwait: PAI Prepares Draft Standard for Energy Efficiency, Functionality and Labeling Requirements for Lighting Products, Part 1
On July 10, 2023, the Public Authority for Industry (PAI) prepared Part 1 of a draft standard for energy efficiency, functionality and labeling requirements for lighting products.
Comments and feedback can be submitted until Sept. 8, 2023.Energy Efficiency, Performance
Kuwait
7/10/2023
Kuwait: PAI Prepares Draft Standard for Energy Efficiency, Functionality and Labeling Requirements for Lighting Products, Part 2
On July 10, 2023, the Public Authority for Industry (PAI) prepared Part 2 of a draft standard for energy efficiency, functionality and labeling requirements for lighting products.
Comments and feedback can be submitted
until Sept. 8, 2023.Energy Efficiency, Performance
Israel
7/16/2023
Israel: MEI Removes Series of Tests Related to Energy Efficiency and Performance of Various Electrical and Electronic Products
On July 16, 2023, the Ministry of Economy and Industry (MEI) removed a series of tests related to energy efficiency and performance for various electrical and electronic products.Energy Efficiency, Safety
Brazil
6/29/2023
Brazil: INMETRO Issues Notice on the Use of Third-Party Certificate of Conformity in Import Licensing Processes
On June 29, 2023, the National Institute of Metrology, Quality and Technology (INMETRO) issued a notice in the SISCOMEX, a computer system that registers all import and export procedures: Import No. 036/2023 on the change in the systematic use of third-party certificates of conformity in import licensing processes, effective June 30, 2023.Energy Efficiency, Safety
Malaysia
6/27/2023
Malaysia: SIRIM Announces Stricter Inspection and Test Failure Policy for Consignment
On June 27, 2023, the Suruhanjaya Tenaga (ST) ordered SIRIM QAS Consignment Lab to issue a failure letter immediately for electrical equipment that fails the consignment test.Energy Efficiency, Safety, Performance
Israel
7/2/2023
Israel: MEI Publishes Draft Order Amendment to Third Addendum of International Standard Route (CASIS)
On July 2, 2023, the Ministry of Economy and Industry (MEI) published a draft order to amend the third addendum to expand the use of the international standard adjustment route (CASIS).
Comments and suggestions were accepted until July 23, 2023.Energy Efficiency, Sustainability
EU
6/16/2023
European Union Adopts Ecodesign and Energy Labeling Requirements for Mobile Phones and Tablets
On June 16, 2023, the European Parliament and the Council of the European Union adopted the latest drafts for ecodesign and energy labeling requirements for mobile phones and tablets, respectively. This will ensure that manufacturers design sustainable mobile phones and tablets. This regulation entered into force 20 days after its publication in the Official Journal of the European Union — July 6, 2023.Explosive Atmospheres
Global
6/27/2023
IEC Publishes New Standard, IEC 60079-11:2023/COR1:2023, for Equipment Protection by Intrinsic Safety “i”
On June 27, 2023, the International Electrotechnical Commission (IEC) released IEC 60079-11:2023/COR1:2023. This standard deals with explosive atmospheres specifically for equipment protection by intrinsic safety “i.”Explosive Atmospheres, Safety
China
6/16/2023
China: MIIT Issues Public Consultation of 12 Mandatory National Standards, Including Safety Requirements for Lithium-Ion Batteries for Electric Bicycles
On June 16, 2023, the Ministry of Industry and Information Technology of the People’s Republic of China (MIIT) published a plan list for formulating and revising 12 mandatory national standards (GB Standards), including requirements for safety technical specifications for packaging containing a variety of dangerous goods; explosion protection for equipment in explosive atmospheres; electrical equipment for measurement, control and laboratory use; industrial automation equipment; and lithium-ion batteries for electric bicycles, etc., for public opinions until Aug. 16, 2023.F Gas, Chemicals
USA
7/13/2023
USA: Washington DoE Updates Proposed Rule on Hydrofluorocarbons (HFCs) and Other Fluorinated Greenhouse Gases for Air Conditioners and Commercial Refrigerators
On July 13, 2023, Washington state’s Department of Ecology proposed to update a rule on hydrofluorocarbons (HFCs) and other fluorinated greenhouse gases for air conditioners and commercial refrigerators.
This proposed rule:- Establishes maximum global warming potential (GWP) thresholds for
hydrofluorocarbons used in new stationary refrigeration and air-conditioning equipment - Establishes a refrigerant management program with registration, leak detection, leak repair, recordkeeping and reporting requirements for owners or operators of large stationary refrigeration and air-conditioning systems
- Amends product labeling and disclosure requirements
- Establishes new labeling and recordkeeping requirements
- Updates Chapter 173-443 WAC to reflect other changes in the law
- Revises the title of the chapter to Hydrofluorocarbons (HFCs) and Other Fluorinated Greenhouse Gases
Performance
Global, CB Scheme
6/29/2023
IEC Publishes New Standard, IEC 60068-3-1:2023, with Guidance for Cold and Dry Heat Tests
On June 29, 2023, the International Electrotechnical Commission (IEC) released IEC 60068-3-1:2023. This standard deals with supporting documentation and guidance for cold and dry heat tests.Performance
EU
6/30/2023
European Union: CENELEC Publishes New Standard, EN IEC 61076-2-115:2023, for Circular Connectors for Electrical and Electronic Equipment
On June 30, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 61076-2-115:2023, for circular connectors for 12-pole shielded connectors with 2 A-rated current and IP65/IP67 metal housing with push-pull locking.Performance
EU
6/30/2023
European Union: CENELEC Publishes New Standard, EN IEC 60076-19-1:2023, for Power Transformers
On June 30, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60076-19-1:2023, Power Transformers – Part 19-1: Rules for the Determination of Uncertainties in the Measurement of the Losses of Power Transformers.
The date of withdrawal of the superseded version is June 27, 2026.Performance
EU
7/7/2023
European Union: CENELEC Publishes New Standard, EN IEC 60728-106:2023, for Optical Equipment for Systems Loaded with Digital Channels
On July 7, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60728-106:2023, Cable Networks for Television Signals, Sound Signals and Interactive Services – Part 106: Optical Equipment for Systems Loaded with Digital Channels Only.Performance
EU
7/7/2023
European Union: CENELEC Publishes New Standard, EN IEC 60728-113:2023, for Optical Systems for Broadcast Signal Transmissions with Digital Channels
On July 7, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60728-113:2023, Cable Networks for Television Signals, Sound Signals and Interactive Services – Part 113: Optical Systems for Broadcast Signal Transmissions Loaded with Digital Channels Only.
The date of withdrawal of the superseded version is July 5, 2026.Performance
EU
7/14/2023
European Union: CENELEC Publishes Corrigendum Standard EN IEC 61300-3-4:2023/AC:2023-07 for Fiber Optic Interconnecting Devices and Passive Components
On July 14, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard, EN IEC 61300-3-4:2023/AC:2023-07, Fiber Optic Interconnecting Devices and Passive Components – Basic Test and Measurement Procedures – Part 3-4: Examinations and Measurements - Attenuation.Performance
Global
7/14/2023
IEC Publishes New Standard, IEC 63241-1:2023, Containing General Requirements for Dust Measurement Procedures for Electric Motor-Operated Tools
On July 14, 2023, the International Electrotechnical Commission (IEC) released IEC 63241-1:2023. This standard deals with the general requirements for dust measurement procedures for electric motor-operated tools.Performance
Global
7/14/2023
IEC Publishes New Standard, IEC 63241-2-6:2023, for Dust Measurement Procedures for Hand-Held Hammers
On July 14, 2023, the International Electrotechnical Commission (IEC) released IEC 63241-2-6:2023. This standard deals with dust measurement procedures with particular requirements for hand-held hammers.Performance
EU
7/14/2023
European Union: CENELEC Publishes Corrigendum Standard EN IEC 61300-3-53:2021/AC:2023-07 for Fiber Optic Interconnecting Devices and Passive Components
On July 14, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard, EN IEC 61300-3-53:2021/AC:2023-07, Fiber Optic Interconnecting Devices and Passive Components – Basic Test and Measurement Procedures – Examinations and Measurements – Encircled Angular Flux (EAF) Measurement Method Based on Two-Dimensional Far Field Data from Multimode Waveguide (Including Fiber).Performance
EU
7/14/2023
European Union: CENELEC Publishes Corrigendum Standard EN IEC 60076-22-7:2020/AC:2023-07 for Power Transformer and Reactor Fittings and Accessories
On July 14, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard, EN IEC 60076-22-7:2020/AC:2023-07, Power Transformers – Part 22-7: Power Transformer and Reactor Fittings – Accessories and Fittings.Performance
Global
7/20/2023
IEC Publishes New Standard, IEC 62885-4:2020+AMD1:2023, for Methods for Measuring Performance of Surface-Cleaning Appliances
On July 20, 2023, the International Electrotechnical Commission (IEC) released IEC 62885-4:2020+AMD1:2023. This standard deals with methods for measuring the performance of surface-cleaning appliances — specifically for cordless dry vacuum cleaners for household or similar use.Performance
Global
7/21/2023
IEC Publishes New Standard, IEC 63086-1:2020+AMD1:2023, for Methods of Measuring Performance of Air-Cleaning Appliances
On July 20, 2023, the International Electrotechnical Commission (IEC) released IEC 63086-1:2020+AMD1:2023. This standard deals with methods for measuring the performance of electrical air-cleaning appliances for household or similar use.Performance
EU
7/21/2023
European Union: CENELEC Publishes New Standard, EN IEC 63474:2023, Electrical and Electronic Household and Office Equipment – Measurement of Networked Standby Power Consumption of Edge Equipment
On July 21, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 63474:2023, Electrical and Electronic Household and Office Equipment – Measurement of Networked Standby Power Consumption of Edge Equipment.Performance
EU
7/21/2023
European Union: CENELEC Publishes New Standard, EN 50411-3-2:2023, for Single-Mode Mechanical Fiber Splices
On July 21, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN 50411-3-2:2023, Fiber Management Systems and Protective Housings to be Used in Optical Fiber Communication Systems – Product Specifications – Part 3-2: Single-Mode Mechanical Fiber Splice.
The date of withdrawal of the superseded version is July 21, 2024.Performance, Safety
EU
5/5/2023
Europe’s ETICS Updates ECS 043 Glossary, Acronyms and Definitions
On May 5, 2023, the European Electrical Products Certification Association (ETICS) updated ECS 043 – Glossary, Acronyms and Definitions. This document may be used as a guide for various standards across ETICS.Performance, Safety
EU
5/31/2023
Europe’s ETICS Updates EN Test Report Format
On May 31, 2023, the European Electrical Products Certification Association (ETICS) updated the OD ECS 040-3 EN test report form. This updated test report format is to be used in the compliance process.Performance, Safety
EU
4/1/2023
Europe’s ETICS Updates CIG 021: Factory Inspection Procedures Harmonized Requirements
On April 2023, the European Electrical Products Certification Association (ETICS) updated CIG 021: Factory Inspection Procedures Harmonized Requirements. This document contains factory inspection procedures and tests for license holders, ensuring that in-scope products are produced to acceptable quality standards.Performance, Safety
EU
4/1/2023
Europe’s ETICS Publishes latest European Certification System (ECS) Scopes
On April 2023, the European Electrical Products Certification Association (ETICS) updated OD ECS 009 ECS scopes. This document provides information and specified instructions concerning the continuous maintenance of scopes in the European Certification System (ECS).Performance, Safety
EU
4/1/2023
Europe’s ETICS Publishes ENEC Requirements for Horticultural Luminaires with LEDs
On April 2023, the European Electrical Products Certification Association (ETICS), published PD ERS 002 ENEC Requirement Sheet 002, Horticultural Luminaires with LEDs. This document details the specifications for granting the ENEC mark for horticultural luminaires with LEDs according to the application of EN standards.Performance, Wireless
India
7/3/2023
India: TEC Exempts Various Parameters/Interfaces of Several Products Under MTCTE Scheme
On July 3, 2023, the Telecommunication Engineering Centre (TEC) published Notification No. 5-5/2021-TC/TEC regarding an exemption pertaining to various parameters/interfaces of essential requirements (ERs) under the Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.RoHS, Chemicals
Global
3/10/2023
IEC Publishes New Standard, IEC 62321-12:2023, for Determining Substances in Electrotechnical Products
On March 10, 2023, the International Electrotechnical Commission (IEC) released IEC 62321-12:2023. This standard deals with the determination of certain substances in electrotechnical products — particularly for simultaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers via gas chromatography.RoHS, Chemicals
EU
7/11/2023
European Union: EC Adopts RoHS Exemption on Mercury in Melt Pressure Transducers for Specific Capillary Rheometers
On July 11, 2023, Commission Delegated Directive (EU) 2023/1437 of 4 May 2023 was published in the Official Journal of the European Union, which amends, for the purposes of adapting to scientific and technical progress, Annex IV to Directive 2011/65/EU (RoHS Directive) of the European Parliament and of the Council regarding an exemption for mercury in melt pressure transducers for capillary rheometers under certain conditions.RoHS, Chemicals
China
6/16/2023
China: MIIT Announces Draft Mandatory National Standard Revision Plan 2023, Including Standard on Restriction of the Use of Hazardous Substances in Electrical and Electronic Products
On June 16, 2023, the Ministry of Industry and Information Technology (MIIT) announced its 2023 plan for 14 mandatory national standard revisions, including a new standard that sets limits on the concentrations of hazardous substances in electrical and electronic products, combining the existing China RoHS standards.
The plan shows the:- Required development time periods
- Background
- Scopes
- Main technical details of the standards
RoHS, Safety, Chemicals
China
6/16/2023
China: MIIT Issues Public Consultation of 14 Mandatory National Standards, Including Lithium-ion Cells and Batteries Used in Various Products
On June 16, 2023, the Ministry of Industry and Information Technology of the People’s Republic of China (MIIT) published the plan list for formulating and revising 14 mandatory national standards (GB standards), including requirements for certain restricted substances in electrical and electronic products, lithium-ion cells and batteries used in electric tools, portable household electric appliances, toys and electric vehicles, etc., for public opinion until July 16, 2023.Safety
Saudi Arabia
6/23/2023
Saudi Arabia: SASO Prepares Draft Technical Regulation for Electric Personal Mobility Devices (Scooters)
On June 23, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) prepared a draft technical regulation for electric personal mobility devices (scooters).
Comments and feedback are accepted until Aug. 22, 2023.Safety
Australia, New Zealand
6/9/2023
Australia and New Zealand Publish AS/NZS 61215.1.4:2023 Containing Special Requirements for Testing Thin-Film Cu(In,Ga)(S,Se)2-Based Photovoltaic (PV) Modules
On June 9, 2023, Standards Australia and New Zealand published AS/NZS 61215.1.4:2023. This standard deals with special requirements for testing thin-film Cu(In,Ga)(S,Se)2-based photovoltaic (PV) modules.Safety
Australia, New Zealand
6/9/2023
Australia and New Zealand Publish AS/NZS 61215.1.2:2023 Containing Special Requirements for Testing Thin-Film Cadmium Telluride (CdTe)-Based Photovoltaic (PV) Modules
On June 9, 2023, Standards Australia and New Zealand published AS/NZS 61215.1.2:2023. This standard deals with special requirements for testing thin-film cadmium telluride (CdTe)-based photovoltaic (PV) modules.Safety
Australia, New Zealand
6/9/2023
Australia and New Zealand Publish AS/NZS 61215.1.3:2023 Containing Special Requirements for Testing Thin-Film Amorphous Silicon-Based Photovoltaic (PV) Modules
On June 9, 2023, Standards Australia and New Zealand published AS/NZS 61215.1.3:2023. This standard deals with special requirements for testing thin-film amorphous silicon-based photovoltaic (PV) modules.Safety
Australia, New Zealand
6/9/2023
Australia and New Zealand Publish AS/NZS 62852:2023 Containing Safety Requirements and Tests for Connectors for DC Application in Photovoltaic Systems
On June 9, 2023, Standards Australia and New Zealand published AS/NZS 62852:2023. This standard deals with safety requirements and tests for connectors for DC application in photovoltaic systems.Safety
United Kingdom
6/29/2023
United Kingdom: DBT Issues Notice of Publication 0085/23 for Designated Standards for Refrigerators Under Low-Voltage Equipment
On June 29, 2023, the department for business and trade of the U.K. government released Notice of Publication 0085/23.
Standards for electrical equipment designed for use within certain voltage limits in support of the Electrical Equipment (Safety) Regulations 2016 (S.I. 2016/1101) were amended.
These are the designated standards under the Electrical Equipment (Safety) Regulations. In order to comply with the legislation, manufacturers can choose whether or not to apply designated standards or parts thereof. Designated standards are not mandatory, but they can simplify the process of meeting the essential requirements set forth in the legislation. For this reason, when designated standards exist, they are commonly used by manufacturers.Safety
Global, CB Scheme
7/1/2023
IECEE Includes New Standards in IECEE System for the Months of May and June 2023
In May and June 2023, new standards were included in the IECEE system.CONT IEC 60255-1:2022 2023-05-31 CONT IEC 60255-27:2023 2023-05-31 MED IEC 60601-2-6:2012/AMD2:2022 2023-05-31 MED IEC 60601-2-33:2022 2023-05-31 LITE IEC 60400:2017/AMD2:2022 2023-06-02 INST IEC 60282-1:2020 2023-06-05 POW IEC 62271-111:2019 2023-06-05 POW IEC 62271-111:2012 2023-06-05 POW IEC 62271-202:2014 2023-06-05 Safety
Canada
6/19/2023
Canada: SCC Publishes New Edition of CSA/ANSI Z21.1-2018/CSA 1.1 for Household Cooking Gas Appliances
On June 19, 2023, the Standards Council of Canada (SCC), published a new edition of CSA/ANSI Z21.1-2018/CSA 1.1. This standard specifies the safety requirements for gas cooking appliances.
Comments were accepted until July 19, 2023.Safety
Australia, New Zealand
6/30/2023
Australia and New Zealand Prepare Draft AS/NZS 61008.1:2015, Amendment 1, Containing General Rules for RCCBs Without Integral Overcurrent Protection for Household and Similar Use
On June 30, 2023, Standards Australia and New Zealand prepared draft standard DR AS/NZS 61008.1:2015, Amendment 1. This standard applies to residual current-operated circuit breakers functionally independent of or functionally dependent on line voltage for household and similar uses that do not incorporate overcurrent protection and are intended principally for protection against shock hazards.
The closing date for comments is Sept. 1, 2023.Safety
Global, CB Scheme
6/30/2023
IECEE Adds New Test Report Forms (TRFs) to IECEE in Week 26
On June 30, 2023, new TRFs were published and added to the IECEE website.Safety
Australia, New Zealand
6/30/2023
Australia and New Zealand Prepare Draft AS/NZS 61009.1:2015, Amendment 1:2023, Containing General Rules for RCBOs with Integral Overcurrent Protection for Household and Similar Use
On June 30, 2023, Standards Australia and New Zealand prepared draft standard DR AS/NZS 61009.1:2015, Amendment 1:2023. This standard applies to RCBOs with integral overcurrent protection functionally independent of or functionally dependent on line voltage for household and similar uses.
The closing date for comments is Sept. 1, 2023.Safety
EU
7/4/2023
European Union: EC Publishes Corrigendum on Recently Released Regulation on Machinery (EU) 2023/1230
On July 4, 2023, the European Parliament and the Council of the European Union published a corrigendum to Regulation (EU) 2023/1230 of the European Parliament and of the Council of 14 June 2023 on machinery and repealing Directive 2006/42/EC of the European Parliament and of the Council and Council Directive 73/361/EEC. The changes consist of modifications to transition dates based on adoptions and implementations.Safety
Chile
6/28/2023
Chile: SEC Releases Draft Safety Protocol Update for Refrigerating Appliances
On June 28, 2023, the Superintendency of Electricity and Fuels (SEC) published draft protocol update PE No. 1/17:2023, which deals with the safety certification procedure for refrigerators, freezers and refrigerator/freezers.
Comments may be submitted until Aug. 27, 2023.Safety
Chile
6/29/2023
Chile: SEC Releases Draft Safety Protocol Update for Air Conditioners
On June 29, 2023, the Superintendency of Electricity and Fuels (SEC) published draft protocol PE No. 1/26:2023, which deals with the safety certification procedure for air conditioners.
Comments may be submitted until Aug. 28, 2023.Safety
Australia, New Zealand
6/30/2023
Australia and New Zealand Publish AS/NZS 60335.2.40:2023 Containing Safety Requirements for Electrical Heat Pumps, Air Conditioners and Dehumidifiers
On June 30, 2023, Standards Australia and New Zealand published AS/NZS 60335.2.40:2023 (excludes IEC text)/AS/NZS 60335.2.40:2023 (includes IEC text). This standard deals with safety requirements for heat pumps, air conditioners and dehumidifiers.Safety
Australia, New Zealand
6/30/2023
Australia and New Zealand Publish AS/NZS 60335.2.2:2020, Amendment 1:2023, Containing Safety Requirements for Vacuum Cleaners and Water Suction Cleaning Appliances
On June 30, 2023, Standards Australia and New Zealand published AS/NZS 60335.2.2:2020, Amendment 1:2023 (excludes IEC text)/AS/NZS 60335.2.2:2020, Amendment 1:2023 (includes IEC text). This standard deals with safety requirements for vacuum cleaners and water suction cleaning appliances.Safety
Chile
7/5/2023
Chile: SEC Releases Draft Safety Protocol Update for Conductors in Electrical Products
On July 5, 2023, the Superintendency of Electricity and Fuels (SEC) published draft protocol update PE No. 2/15:2023, which deals with the safety certification procedure for conductors.
Comments can be submitted until Sept. 3, 2023.Safety
Israel
6/29/2023
Israel: SII Prepares Draft Standard SI 61386, Part 21, for Rigid Conduit Systems for Cable Management
On June 29, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 61386, Part 21, for rigid conduit systems for cable management systems.
Comments and feedback were accepted until July 20, 2023.Safety
Global, CB Scheme
7/3/2023
IEC Publishes New Standard IEC 60061-2:1969/AMD47:2014/COR1:2023 for Lampholders
On July 3, 2023, the International Electrotechnical Commission (IEC) released IEC 60061-2:1969/AMD47:2014/COR1:2023. This standard deals with lamp caps, holders and gauges for controlling interchangeability and safety, specifically for lamp holders.Safety
Canada
7/1/2023
Canada Proposes Amendment on Radiation-Emitting Devices
Regulations (Laser Products)
On July 1, 2023, Canada‘s Department of Health published a proposal to amend the Radiation Emitting Device Regulations (REDR) to include new provisions to replace outdated radiation protection requirements for laser scanners and demonstration lasers with contemporary requirements appropriate for the wide range of laser products currently offered to Canadians and proportionate to their level of hazard.
Interested parties may make representations concerning the proposed regulatory amendment within 75 days after the date of publication of the proposal — Sept. 14, 2023.Safety
Global, CB Scheme
7/7/2023
IECEE Adds New Test Report Forms (TRFs) to IECEE in Week 27
On July 7, 2023, new TRFs were published and added to the IECEE website.Safety
Australia, New Zealand
6/30/2023
Australia and New Zealand Publish AS/NZS 62841.4.7:2023 Containing Safety Requirements for Pedestrian-Controlled Walk-Behind Lawn Scarifiers and Aerators
On June 30, 2023, Standards Australia and New Zealand published AS/NZS 62841.4.7:2023 (includes IEC text)/AS/NZS 62841.4.7:2023 (excludes IEC text). This standard deals with safety requirements for pedestrian-controlled walk-behind lawn scarifiers and aerators.Safety
Australia, New Zealand
6/9/2023
Australia and New Zealand Publish AS/NZS IEC 62109.3:2023 Containing Safety Requirements for Electronic Devices in Combination with Photovoltaic Elements
On June 9, 2023, Standards Australia and New Zealand published AS/NZS IEC 62109.3:2023. This standard deals with safety requirements for electronic devices in combination with photovoltaic elements.Safety
Australia, New Zealand
6/16/2023
Australia and New Zealand Publish AS/NZS 63112:2023 Containing Safety and Safety-Related Functionality of Photovoltaic Earth Fault Protection Equipment
On June 16, 2023, Standards Australia and New Zealand published AS/NZS 63112:2023. This standard deals with safety and safety-related functionality of low-voltage photovoltaic earth fault protection equipment (PV-EFPE) whose function is to detect, interrupt and warn system operators of earth faults in solar photovoltaic arrays.Safety
Australia, New Zealand
6/16/2023
Australia and New Zealand Publish AS/NZS 61215.2:2023 Containing Test Procedures and Requirements for Design Qualification of Terrestrial Photovoltaic Modules
On June 16, 2023, Standards Australia and New Zealand published AS/NZS 61215.2:2023. This standard deals with test procedures and requirements for the design qualification of terrestrial photovoltaic modules suitable for long-term operation in open-air climates.Safety
New Zealand
6/30/2023
New Zealand Publishes SNZ PAS 6010:2023 for Commercial Electric Vehicle (EV) Charging
On June 30, 2023, Standards New Zealand published SNZ PAS 6010:2023. This publicly available specification (PAS) deals with electric vehicle (EV) chargers for commercial applications.Safety
China
6/16/2023
China: CQC Issues Implementation of New Standard and Voluntary Safety Certification Rules for Daily-Use Metallic Tube Electric Heating Elements
On June 16, 2023, the China Quality Certification Centre (CQC) issued a notice on the implementation of new standard JB/T 4088.1-2022 and Voluntary Safety Certification Rules of Daily-Use Metallic Tube Electric Heating Elements CQC11-448311-2023, which involves CQC product certification category 002017.Safety
Canada
7/4/2023
Canada: SCC Reaffirms CAN/CSA-C22.2 No. 60335-2-44:14 (R2018) Containing Safety Requirements for Ironers
On July 4, 2023, the Standards Council of Canada (SCC) started its review of CAN/CSA-C22.2 No. 60335-2-44:14 (R2018). This standard deals with safety requirements for household and similar electrical appliances — particularly ironers.
Comments were accepted until Aug. 1, 2023.Safety
Canada
7/4/2023
Canada: SCC Reaffirms CAN/CSA-C22.2 No. 60335-2-45:14 (R2018) Containing Safety Requirements for Portable Heating Tools and Similar Appliances
On July 4, 2023, the Standards Council of Canada (SCC), started its review of CAN/CSA-C22.2 No. 60335-2-45:14 (R2018). This standard deals with safety requirements for portable heating tools and similar appliances.
Comments were accepted until Aug. 1, 2023.Safety
Canada
7/4/2023
Canada: SCC Reaffirms CSA C22.2 No. 60335-2-52:14 (R2019) Containing Safety Requirements for Oral Hygiene Appliances
On July 4, 2023, the Standards Council of Canada (SCC), started its review of CSA C22.2 No. 60335-2-52:14 (R2019). This standard outlines safety requirements for household and similar electrical appliances — specifically for oral hygiene appliances.
Comments were accepted until Aug. 1, 2023.Safety
Israel
7/5/2023
Israel: MEI Announces Changes in Standard SI 61439, Parts 1 and 2, for Low-Voltage Switchgear and Controlgear Assemblies
On July 5, 2023, the Ministry of Economy and Industry (MEI) announced changes to the SI 61439 standard, Parts 1 and 2, for low-voltage switchgear and controlgear assemblies.
Comments and feedback were accepted until Aug. 4, 2023.Safety
New Zealand
6/30/2023
New Zealand Publishes SNZ PAS 6011:2023 for Residential Electric Vehicle (EV) Charging
On June 30, 2023, Standards New Zealand published SNZ PAS 6011:2023. This publicly available specification (PAS) deals with electric vehicle (EV) chargers for residential applications.Safety
Jordan
5/29/2023
Jordan: JSMO Publishes Various Standards for Plugs, Socket Outlets, Switches, Conduit Systems and Electric Irons for Household or Similar Use
On May 29, 2023, the Jordan Standards and Metrology Organization (JSMO) published various standards: JS IEC 61386-1:2023, JS IEC 60884-1:2023, JS IEC 60669-1:2023 and JS IEC 60311-1:2023. These standards deal with requirements for conduit systems for cable management, plugs, socket outlets and switches for household and similar use, and measuring performance for household electric irons.
Please contact your local UL Solutions office for more information.Safety
EU
7/14/2023
European Union: CENELEC Publishes Corrigendum Standard EN IEC 60947-6-2:2023/AC:2023-07 for Control and Protective Switching Devices
On July 14, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard, EN IEC 60947-6-2:2023/AC:2023-07, Low-Voltage Switchgear and Controlgear – Part 6-2: Multiple Function Equipment – Control and Protective Switching Devices (or Equipment) (CPS).Safety
Jordan
4/16/2023
Jordan: JSMO Publishes Various Standards for Electric Vehicle Conductive Charging Systems
On April 16, 2023, the Jordan Standards and Metrology Organization (JSMO) published various standards: JS IEC 61851-1:2022, JS 61851-23:2022, JS IEC 62196-1:2023, JS IEC 62196-2:2023 and JS IEC 62196-3:2023. These standards deal with requirements for electric vehicle conductive charging systems.
Please contact your local UL Solutions office for more information.Safety
EU
7/14/2023
European Union: CENELEC Publishes Corrigendum Standard EN IEC 62471-7:2023/AC:2023-07 for Photobiological Safety of Lamps and Lamp Systems
On July 14, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard, EN IEC 62471-7:2023/AC:2023-07, Photobiological Safety of Lamps and Lamp Systems – Part 7: Light Sources and Luminaires Primarily Emitting Visible Radiation.Safety
Global
7/17/2023
IEC Publishes New Standard, IEC 61010-2-034, Containing Requirements for Measurement Equipment for Insulation Resistance and Test Equipment for Electric Strength
On July 17, 2023, the International Electrotechnical Commission (IEC) released IEC 61010-2-034:2023. This standard deals with requirements for measurement equipment for insulation resistance and test equipment for electric strength.Safety
Chile
7/14/2023
Chile: SEC Releases New Draft Safety Protocol for Fixed Luminaires for General Use
On July 14, 2023, the Superintendency of Electricity and Fuels (SEC) published a new draft protocol for the analysis and/or safety tests of fixed luminaires for general use.
Comments can be submitted until Sept. 12, 2023.Safety
Australia, New Zealand
6/30/2023
Australia and New Zealand Publish AS/NZS 60320.1:2023 Containing Safety Requirements for Appliance Couplers for Household and Similar General Purposes
On June 30, 2023, Standards Australia and New Zealand published AS/NZS 60320.1:2023. This standard deals with general safety requirements for appliance couplers for household and similar general purposes.Safety
Israel
7/12/2023
Israel: MEI Announces Intention to Replace Official Standard SI 900, Part 2.2, for Vacuum Cleaners and Water Suction Cleaning Appliances
On July 12, 2023, the Ministry of Economy and Industry (MEI) announced its intention to replace the official standard SI 900, Part 2.2, with SI 60335, Part 2.2, for vacuum cleaners and water suction cleaning appliances.
Comments and feedback were accepted until Aug. 13, 2023.Safety
China
7/1/2023
China: CQC Issues Latest Voluntary Certification Rules for Industrial Distribution Appliances (CQC11-462141-2023)
On July 1, 2023, the China Quality Certification Centre (CQC) issued a notice on the revised voluntary certification rules of CQC11-462141-2019, Implementation Rules for Safety Certification of Industrial Distribution Appliances, to new rules, CQC11-462141-2023, involving CQC product category 012030.Safety
Australia, New Zealand
6/30/2023
Australia and New Zealand Publish AS/NZS 61215.1:2023 Containing Test Requirements for Terrestrial Photovoltaic (PV) Modules
On June 30, 2023, Standards Australia and New Zealand published AS/NZS 61215.1:2023. This standard deals with requirements for the design qualification of terrestrial photovoltaic modules suitable for long-term operation in open-air climates.Safety
Somalia
5/15/2023
Somalia: SOBS Issues Provision of the Consignment Based Conformity Assessment (CBCA) Program for All Imported Products
On May 15, 2023, the Somali Bureau of Standards (SOBS) issued a public notice on the provision of the Consignment Based Conformity Assessment (CBCA) program effective July 15, 2023. This program supports the quality of imported goods in Somalia for the benefit of the people, their property, animals and the environment.Safety
Israel
7/16/2023
Israel: MEI Notifies Stakeholders of its Intention to Announce Newly Official Standards
On July 16, 2023, the Ministry of Economy and Industry (MEI) notified stakeholders of its intention to announce the following newly official standards:- SI 900, Part 2.8, for shavers and hair clippers
- SI 900, Part 2.31, for range hoods and other cooking fume extractors
- SI 900, Part 2.32, for massage appliances
- SI 900, Part 2.75, for commercial dispensing appliances and vending machines
- SI 900, Part 2.76, for electric fence energizers
- SI 900, Part 2.89, for commercial refrigerating appliances and ice makers with an incorporated or remote refrigerant unit or motor-compressor
Safety
Australia, New Zealand
6/23/2023
Australia and New Zealand Publish AS/NZS 5263.0:2023 Containing General Requirements and Test Methods for Gas Appliances
On June 23, 2023, Standards Australia and New Zealand published AS/NZS 5263.0:2023. This standard deals with general requirements and test methods for gas appliances and equipment.Safety
Costa Rica
7/19/2023
Costa Rica: INTECO Publishes New Draft Standard, PN INTE/IEC 60335-1:2023, Containing Safety Requirements for Household and Similar Electrical Appliances
On July 19, 2023, the Institute of Technical Standards of Costa Rica (INTECO) published PN INTE/IEC 60335-1:2023, which deals with safety requirements of household and similar electrical appliances.
The PN INTE/IEC 60335-1:2023 draft standard is open for public consultation until Sept. 12, 2023.Safety
Ukraine
7/13/2023
Ukraine Publishes Changes to its List of National Standards Related to Low Voltage Technical Regulation
On July 13, 2023, the Ministry of Economy published Order No. 8139 on the approval of changes made to its list of national standards for the purposes of applying the technical regulations to low-voltage electrical equipment, approved by the Resolution of the Cabinet of Ministers of Ukraine dated 16.12.2015, No. 1067, formed on the basis of European Commission Implementation Decision (EU) 2019/1956.Safety
Jordan
5/29/2023
Jordan: JSMO Announces Updated List of Standards in Annex A of Electrical Equipment Safety Regulation
On May 29, 2023, the Jordan Standards and Metrology Organization (JSMO) announced an updated list of standards in Annex A of the Electrical Equipment Safety Regulation. These standards deal with requirements for electric vehicle conductive charging systems.
Please contact your local UL Solutions office for more information.Safety
Australia, New Zealand
6/30/2023
Australia and New Zealand Publish Various Standards for PV Modules and Devices
On June 30, 2023, Standards Australia and New Zealand published various standards for photovoltaic modules and devices.- AS/NZS 61215.1.1:2023, Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval, Part 1.1: Special Requirements for Testing of Crystalline Silicon Photovoltaic (PV) Modules
- AS/NZS IEC 60904.1:2023, Photovoltaic Devices, Part 1: Measurement of Photovoltaic Current-Voltage Characteristics
- AS/NZS IEC 62716:2023, Photovoltaic (PV) Modules – Ammonia Corrosion Testing
Safety
Trinidad & Tobago
6/14/2023
Trinidad and Tobago: TTBS Announces Third Virtual Stakeholder Consultation on Draft Compulsory National Standards for Labeling of Goods
On June 14, 2023, the Trinidad and Tobago Bureau of Standards (TTBS) announced that it is hosting the third virtual stakeholder consultation on the draft compulsory national standard TTCS 19:20XX, Labelling of Goods – General – Compulsory Requirements. The public can still review and provide feedback on the draft standard using the comment form until Aug. 16, 2023.Safety
Trinidad & Tobago
6/27/2023
Trinidad and Tobago: TTBS Publishes Draft Compulsory National Standards for Electrical Accessories and Components and Electrical Lighting Products for Public Comment
On June 27, 2023, the Trinidad and Tobago Bureau of Standards (TTBS) published the following draft compulsory national standards for public comment:- PCTTCS 23:20XX, Electrical Accessories and Components – Compulsory Requirements
- PCTTCS 25:20XX, Electrical Lighting Products – Compulsory Requirements
Safety
Global
7/19/2023
IEC Publishes New Standard, IEC 61540:2023, for Portable Residual
Current Devices for Household and Similar Uses
On July 19, 2023, the International Electrotechnical Commission (IEC) released IEC 61540:202. This standard deals with portable residual current devices (PRCDs) without integral overcurrent protection for household and similar use.Safety
Global
7/19/2023
IEC Publishes New Standard, IEC 61076-3-106:2023, for Connectors for Electrical and Electronic Equipment
On July 19, 2023, the International Electrotechnical Commission (IEC) released IEC 61076-3-106:2023. This standard deals with detail specifications for protective housings for use with eight-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface.Safety
EU
7/21/2023
European Union: CENELEC Publishes Corrigendum Standard EN
60061-2:1993/A47:2014/AC:2023-07 for Lampholders
On July 21, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard, EN 60061-2:1993/A47:2014/AC:2023-07, Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety – Part 2: Lampholders.Safety
South Korea
6/27/2023
South Korea: Consumer Goods Safety — KATS Publishes Revision of Safety Management Act Operation Guidelines
On June 27, 2023, the South Korean Agency for Technology and Standards (KATS) published under notice No. 2023-0180 a partial revision of the Electrical Appliances and Household Items Safety Management Act operation guidelines.Safety
Peru
7/21/2023
Peru: INACAL Publishes Draft Safety Standard for Various Household Appliances
On July 21, 2023, the following draft standards were published.- PNTP-IEC 60335-2-13:2023, Household and Similar Electrical Appliances – Safety – Part 2-13: Particular Requirements for Deep Fat Fryers, Frying Pans and Similar Appliances
- PNTP-IEC 60335-2-23:2023, Household and Similar Electrical Appliances – Safety – Part 2-23: Particular Requirements for Appliances for Skin or Hair Care
- PNTP-IEC 60335-2-28:2023, Household and Similar Electrical Appliances – Safety – Part 2-28: Particular Requirements for Sewing Machines
Safety
Peru
7/21/2023
Peru: INACAL Publishes Draft Standards PNTP-IEC 60086-2 and PNTP-IEC 60086-5 for Primary Batteries
On July 21, 2023, the following draft standards were published.- PNTP-IEC 60086-2:2023, Primary Batteries – Part 2: Physical and Electrical Specifications
- PNTP-IEC 60086-5:2023, Primary Batteries – Part 5: Safety of Batteries with Aqueous Electrolyte
Safety
Chile
7/19/2023
Chile: SEC Releases Draft Safety Protocol Update for Electric Heat Pumps
On July 19, 2023, the Superintendency of Electricity and Fuels (SEC) published a draft protocol for analyses and/or safety tests for electric heat pumps.
Comments may be submitted until Sept. 17, 2023.Safety
Chile
7/21/2023
Chile: SEC Releases Draft Safety Protocol Update for Electronic Equipment
On July 21, 2023, the Superintendency of Electricity and Fuels (SEC) published a draft protocol for analyses and/or safety tests for electronic equipment.
Comments may be submitted until Sept. 19, 2023.Safety
Chile
6/27/2023
Chile: SEC Releases Draft Safety Protocol Update for Clothes and Towel Dryers and Shoe or Glove Dryers
On June 27, 2023, the Superintendency of Electricity and Fuels (SEC) released PE No. 1/41:2023, a draft protocol for analyses and/or safety tests of dryers for clothing, towels, and shoes or gloves.
Comments may be submitted until Aug. 27, 2023.Safety
Chile
6/23/2023
Chile: SEC Releases Draft Safety Protocol Update for Television Decoders
On June 23, 2023, the Superintendency of Electricity and Fuels (SEC) released PE No. 8/12:2023, a draft protocol for analyses and/or safety tests of decoders for televisions.
Comments may be submitted until Aug. 22, 2023.Safety, Chemicals, Sustainability, Performance
EU
7/28/2023
European Union Publishes New Regulation on Batteries and Waste Batteries
On July 28, 2023, Regulation (EU) 2023/1542 of the European Union Parliament and of the Council of 12 July 2023, concerning batteries and waste batteries, amending Directive 2008/98/EC and Regulation (EU) 2019/1020 and repealing Directive 2006/66/EC, was published in the Official Journal of the European Union and entered into force on Aug. 17, 2023 — 20 days after its publication.Safety, Electrical and Electronic Waste
Tanzania
3/30/2023
Tanzania: TCRA Releases Notice of Implementation of Pre-Inspection and Collection of Advance Eco Levy Fees on Imported Electronic Communication Equipment
On March 30, 2023, the Tanzania Communications Regulatory Authority (TCRA) published a press release to announce that all electronic communication equipment imported into the country will be:- Required to undergo assessment to verify that they have not reached their end of life
- Charged an electronic waste management fee to cover management costs of the equipment if it reaches the end –of its life
Safety, Energy Efficiency
Malaysia
6/27/2023
Malaysia: SIRIM Announces Return of 100% Consignment Physical Inspection
On June 27, 2023, the Suruhanjaya Tenaga (ST) ordered SIRIM QAS Consignment Lab to discontinue its remote or video call inspection services in response to COVID-19’s transition from the pandemic to the endemic phase starting Aug. 1, 2023.Safety, Energy Efficiency, Performance
Taiwan
6/28/2023
Taiwan: MOEA Issues Revised Requirements for Voluntary Product Registration of Photovoltaic Modules
On June 28, 2023, the Ministry of Economic Affairs (MOEA) issued a revised regulation of Directions for Photovoltaic Module Product Registration, which came into effect on the same day. This order changes the requirements for voluntary product registration of PV modules or solar panels for public information. Registries of product specifications and certifications can assist in establishing a list of qualified PV modules to improve installer confidence.Safety, Performance
Argentina, Brazil, Uruguay, Paraguay
6/15/2023
Mercosur Releases Draft Safety and Performance Requirements for Domestic Gas Appliances
On June 15, 2023, the Mercado Común del Sur, or Southern Common Market (MERCOSUR), released MERCOSUR/84 SGT No. 3/P, CASE No. 05/23, Technical Regulation for Domestic Gas Appliances for Cooking. This document establishes essential safety and performance requirements for the manufacture, importation and marketing of domestic gas appliances for cooking for member state countries Argentina, Brazil, Paraguay and Uruguay.
Comments are accepted until Sept. 8, 2023.Safety, Performance
EU
4/26/2023
Europe’s ETICS Updates Routine Tests for Switches for Appliances
On April 26, 2023, the European Testing Inspection Certification System (ETICS) updated ENEC 303, Annex T, Routine Test Requirements for Manufacturers – Cord Switches and Switches for Appliances Covered by EN 61058-1 and Parts 2 (EN 61058-2-1, -2-5 and 2-6). This contains provisions on the routine tests and periodic tests that should be done on the products in its scope to obtain the ENEC mark.Safety, Performance
Global
7/14/2023
IEC Publishes New Standard, IEC 61076-8-106:2023, Containing Requirements for Connectors for Electrical and Electronic Equipment
On July 14, 2023, the International Electrotechnical Commission (IEC) released IEC 61076-8-106:2023. This standard deals with product requirements for connectors for electrical and electronic equipment — specifically, the detail specification for two-pole push-pull coupling rectangular connectors with fuses for 400 VDC-rated voltage and 16 A-rated current.Safety, Performance
EU
7/21/2023
European Union: CENELEC Publishes New Standard, EN 50626-1:2023, for Conduit Systems for Insulated Electrical Cables or Communication Cables
On July 21, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN 50626-1:2023, Conduit Systems Buried Underground for the Protection and Management of Insulated Electrical Cables or Communication Cables – Part 1: General Requirements.
The date of withdrawal of the superseded version is July 21, 2026.Safety, Performance
EU
7/21/2023
European Union: CENELEC Publishes New Standard, EN 50626-2:2023, for Conduit Systems for Solid-Wall Conduits and Fittings Used in Special Applications
On July 21, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN 50626-2:2023, Conduit Systems Buried Underground for the Protection and Management of Insulated Electrical Cables or Communication Cables – Part 2: Polyethylene (PE), Polypropylene (PP) or Unplasticized Poly(Vinyl Chloride) (PVC-U) Conduit Systems – Requirements for Solid Wall Conduits, Fittings and the System Used in Special Applications.Safety, RoHS, Performance, Energy Efficiency, EMC, Chemicals
Israel
7/3/2023
Israel: MEI Reminds Importers of Obligation to Maintain Product Portfolio Through Free Import Order
On July 3, 2023, the Ministry of Economy and Industry (MEI) reminded importers of their obligation to maintain a product portfolio that applies to imports through the approval route according to Regulation 2(C)(2) of the Free Import Order.Sanitation
Australia
5/1/2023
Australia: ABCB Publishes Notices on Certification of Lead-Free Plumbing Products
On May 1, 2023, the Australian Building Codes Board (ABCB) published various notices related to certification requirements for lead-free plumbing products.Sanitation
Luxembourg
6/20/2023
Luxembourg: MA Publishes Preliminary Draft Grand Ducal Regulation on Metal and Alloy Materials and Objects Intended to Come into Contact with Foodstuffs
On June 20, 2023, the Ministry of Agriculture, Viticulture and Rural Development of Luxembourg published a draft Grand Ducal regulation relating to metal and alloy materials and objects intended to come into contact with foodstuffs under the EU TRIS notification procedure.
Comments are accepted until Sept. 21, 2023.Sanitation
EU
7/12/2023
European Union: EC Adopts 16th Amendment to Regulation on Plastic Materials and Articles Intended to Come into Contact with Food
On July 12, 2023, the European Commission (EC) adopted Commission Regulation (EU) 2023/1442 of 11 July 2023 amending Annex I of Regulation (EU) No. 10/2011 concerning plastic materials and articles intended to come into contact with foodstuffs as regards amendments to substance authorizations and the addition of new substances.
Please contact your local UL Solutions office for more information.Sanitation
EU
7/6/2023
European Union: JRC Publishes Technical Report on Testing Conditions for Kitchenware Articles in Contact with Foodstuffs: Plastics, Metals, Silicone and Rubber, Paper and Board
On July 6, 2023, the Joint Research Center (European Commission) published testing conditions for kitchenware articles in contact with foodstuffs: plastics, metals, silicone and rubber, paper and board.Sustainability
Croatia
7/7/2023
Croatia: MINGOR Publishes Draft Proposal for Ordinance on Packaging and Waste Packaging, Single-Use Plastic Products and Fishing Gear Containing Plastic
On July 7, 2023, the Ministry of Economy and Sustainable Development of Croatia published a draft proposal for the Ordinance on Packaging and Packaging Waste, Single-Use Plastic Products and Fishing Gear Containing Plastic.
This draft ordinance specifies procedures for:- Fulfilling the goals of waste packaging recovery
- Conditions for managing packaging and packaging waste
- Requirements regarding the collection, storage and processing of packaging waste
- Requirements for the production, placing on the market and use of packaging
- Methods and conditions for labeling packaging
- Obligations to keep records and submit reports
- Obligations and how to fulfil the obligations of the producers of products packed in packaging
- Obligations and mandatory actions of the owner of waste packaging
- Other issues related to packaging and waste packaging, all in order to achieve waste packaging goals
Wireless
Canada
6/5/2023
Canada: ISED Publishes Draft Technical Requirements for RF Exposure Compliance of Radiocommunication Apparatus
On June 5, 2023, Canada’s Innovation, Science and Economic Development (ISED) department opened public consultation on RSS-102, Issue 6, Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands).
Comments can be submitted until Sept. 1, 2023.Wireless
South Korea
6/20/2023
South Korea: RRA Amends Type of Products that can Use 433 MHz Band on License-Exempt Basis
On June 20, 2023, the South Korean Ministry of Science and ICT (MSIT) published a partial revision of Radio Equipment for Radio Stations that can be Established without Reporting (Enforcement 2023.6.20 — Ministry of Science and Technology Information and Communication Notice No. 2023-19, 2023.6.20, partially revised).Wireless
Tunisia
3/3/2023
Tunisia: ANF Publishes Revised Regulation on Maximum Power and Range of Low-Power and Limited-Range Radio Equipment
On March 3, 2023, the National Frequency Agency (ANF) of Tunisia published an amendment related to setting limits on the maximum power and range of low-power and limited-range radio equipment.Wireless
Singapore
6/30/2023
Singapore: IMDA Opens Public Consultation on Revision of Technical Specifications for SRD
On June 30, 2023, the Infocomm Media Development Authority (IMDA) of Singapore opened a public consultation on the draft technical specification for short-range devices (Draft IMDA TS SRD Issue 1 Revision 3, xxx[LL1] 2023).
Comments were accepted until July 18, 2023.Wireless
Vietnam
6/30/2023
Vietnam: MIC Opens Public Consultation on the Allocation of 3,560 – 4,000 MHz Band for International Mobile Telecommunications (IMT)
On June 30, 2023, the Vietnam Ministry of Information and Communication (MIC) opened a public consultation on a draft of Band Planning 3,560-4,000 MHz for Vietnam's IMT Mobile Communication System.
Comments are accepted until Aug. 30, 2023.Wireless
Vietnam
7/4/2023
Vietnam: MIC Opens Public Consultation on the Allocation of 1,920-1,980 MHz and 2,110-2,170 MHz Band for International Mobile Telecommunications (IMT)
On July 4, 2023, the Vietnam Ministry of Information and Communication (MIC) opened a public consultation on a draft of Band Planning 1,920-1,980 MHz, 2,110-2,170 MHz for Vietnam's IMT Mobile Communication System.
Comments are accepted until Sept. 4, 2023.Wireless
China
6/29/2023
China: MIIT Issues Notification for Using and Promoting New Label of Network Access License (NAL)
On June 29, 2023, the Ministry of Industry and Information Technology (MIIT) published MIIT — Information and Communication Management Bureau Notice No. 79 of 2023 from the Ministry of Industry and Information Technology Notification for Using and Promoting New Label of Network Access License (NAL).Wireless
Papua New Guinea
7/3/2023
Papua New Guinea: NICTA Opens Public Consultation on 60 GHz Band Plan
On July 3, 2023, the National Information and Communications Technology Authority (NICTA) of Papua New Guinea opened a public consultation on its draft 60 GHz Band Plan Consultation.
No details have been provided yet on the deadline for comments and where they can be submitted.Wireless
Mexico
6/23/2023
Mexico: IFT Opens Public Consultation on Technical Specifications for Cellular Broadcasting Service for Risk or Emergency Notification
On June 23, 2023, the Mexico Federal Telecommunications Institute (IFT) opened a public consultation on Draft Technical Provision IFT-011-2022, Technical Specifications of Mobile Terminal Equipment – Part 3: Cellular Broadcasting Service for Notification of Risk or Emergency Situations.
Comments were accepted until July 6, 2023.Wireless
Jordan
7/2/2023
Jordan: TRC Opens Public Consultation on Draft Instruction of Internet of Things; Comments Accepted Until Aug. 10, 2023
On July 2, 2023, the Telecommunications Regulatory Commission (TRC) opened public consultation on its draft instructions for the Internet of Things.
Comments were accepted until Aug. 10, 2023.Wireless
United Kingdom
6/29/2023
United Kingdom: Ofcom Opens Public Consultation on 5 Potential Frequency Bands for the Utilities Sector
On June 29, 2023, the Office of Communications (Ofcom) opened a public consultation for potential spectrum bands to support utilities sector transformation, considering 400 MHz, 450 MHz, 700 MHz, 800/900 MHz and 1,900 MHz bands.
Comments are accepted until Sept. 7, 2023.Wireless
Taiwan
7/10/2023
Taiwan: NCC Publishes Revision of Technical Specifications for Mobile Communication Terminal Equipment
On July 10, 2023, the National Communications Commission of Taiwan (NCC) published revised Technical Specifications for Mobile Communication Terminal Equipment (Announcement No. 11265014581) to conform with international standards, which came into effect on the same day.Wireless
Brazil
7/6/2023
Brazil: Anatel Publishes Technical Requirements for Evaluating Compliance of IPv6 Protocol in Telecommunication Products
On July 6, 2023, the National Telecommunications Agency (Anatel) published Act No. 7971, approving the technical requirements for evaluating the compliance of the IPv6 protocol in telecommunications products, in the form of an annex to the act.Wireless
Brazil
7/6/2023
Brazil: Anatel Updates List of Technical Requirements for Category I Products
On July 6, 2023, the National Telecommunications Agency (Anatel) updated its lists of technical requirements and test procedures applicable to Category I telecommunications products.Wireless
United Kingdom
7/6/2023
United Kingdom: Ofcom Opens Public Consultation on Hybrid Sharing of the Upper 6 GHz Band
On July 6, 2023, the Office of Communications (Ofcom) opened a public consultation on Hybrid Sharing: Enabling Both Licensed Mobile and Wi-Fi Users to Access the Upper 6 GHz Band.
Comments are accepted until Sept. 15, 2023.Wireless
Malaysia
7/13/2023
Malaysia: MCMC Announces Extended Interim Type Approval for IPv6 Cellular Equipment Without Wi-Fi Interface
On July 13, 2023, the Standard and Industrial Research Institute of Malaysia (SIRIM) issued announcement reference No. SQASI/CMCS/1/23/0004 on updates for the certification of IPv6 over cellular equipment without Wi-Fi interface (under terminal/host) or IPv6 equipmentoOver other medium — e.g., fiber optic, etc., except ethernet LAN — under interim type approval.Wireless
China
6/27/2023
China: MIIT Publishes New Version of China Radio Frequency Allocation Regulation
On June 27, 2023, the Ministry of Industry and Information Technology (MIIT) published Announcement No. 62 to update the Regulations on Radio Frequency Allocation of the People’s Republic of China to the newest version and allocate the 6 GHz frequency band to 5G/6G systems, which was effective from July 1, 2023.Wireless
Vietnam
6/30/2023
Vietnam: MIC Publishes Amendment of List and Process of Telecommunications and Radio Equipment Compulsory Inspection
On June 30, 2023, the Vietnam Ministry of Information and Communication (MIC) published through Circular No. 07/2023/TT-BTTTT an amendment to the List and Process of Testing Compulsory Telecommunications Equipment and Radio Stations Required for Inspection.Wireless
Hong Kong
7/14/2023
Hong Kong: OFCA Updates Performance Specification Regulations for User Equipment Employing E-UTRA and FDD
On July 14, 2023, the Office of the Communications Authority (OFCA) published the updated HKCA specification Issue 2 of HKCA 1057, Performance Specification for User Equipment for Use in Public Mobile Communications Services Based on Evolved Universal Terrestrial Radio Access (E-UTRA) Frequency Division Duplex (FDD). Updates include some editorial changes, reference updates and the addition of paired bands.Wireless
Hong Kong
7/14/2023
Hong Kong: OFCA Updates Performance Specification Regulations for Base Station and Repeater Equipment Employing E-UTRA and FDD
On July 14, 2023, the Office of the Communications Authority (OFCA) published the updated HKCA specification Issue 2 of HKCA 1056, Performance Specification for Base Station and Repeater Equipment for Use in Public Mobile Communications Services Based on Evolved Universal Terrestrial Radio Access (E-UTRA) Frequency Division Duplex (FDD). Updates include some editorial changes, reference updates and the addition of paired bands.Wireless
Indonesia
7/12/2023
Indonesia: SDPPI Releases Draft Update of Technical Standards for Short-Range Devices
On July 12, 2023, the Directorate General of Resources and Equipment of Post and Information Technology (SDPPI) released a draft of Technical Standards of Short-Range Devices Telecommunication Tools and/or Equipment. This document contains the conditions to be met for operation, import or sale of in-scope communication devices. This draft includes updates on operating frequencies, output power limits and applicable standards.
Comments were accepted until July 27, 2023.Wireless
Oman
7/5/2023
Oman: TRA Opens Public Consultation on Award Mechanism for mmWave Spectrum
On July 5, 2023, the Telecommunications Regulatory Authority (TRA) of Oman opened a public consultation on the valuation and award mechanisms for the mmWave spectrum in Oman.
Comments were accepted until Aug. 3, 2023.Wireless
Malaysia
7/20/2023
Malaysia: SIRIM Announces Latest Payment Procedure for Label Application/Product Registration of Wireless Products
On July 20, 2023, the Standard and Industrial Research Institute of Malaysia (SIRIM) issued announcement reference No. SQASI/CMCS/1/23/0005 on the latest payment procedure for label application/product registration.Wireless
Egypt
6/28/2023
Egypt’s NTRA Updates Type Approval Procedures
On June 2023, the National Telecommunications Regulatory Authority of Egypt updated its type approval procedures. Changes include reducing the number of schemes to three and provisions on user manuals and market surveillance.
The new updates are already in force.Wireless
Chile
7/24/2023
Chile: SUBTEL to Shut Down 2G
On July 24, 2023, the Undersecretariat of Telecommunications (SUBTEL) announced the shutdown of 2G networks/technology for 4G and 5G expansion.Wireless, Cyber Security
United Kingdom
4/29/2023
United Kingdom: DSIT Publishes Product Security Regime
On April 29, 2023, the United Kingdom Department for Science, Innovation and Technology (DSIT) published the U.K. Product Security and Telecommunications Infrastructure (Product Security) regime, which sets out the minimum security requirements for U.K. consumer connectable products.Wireless, EMC
Brazil
7/11/2023
Brazil: Anatel Publishes Draft Technical Requirements for Certification of 4G and 5G Radio Frequency Repeaters
On July 11, 2023, the National Telecommunications Agency (Anatel) opened Public Consultation No. 33 Technical Requirements for Certification of 4G and 5G Radio Frequency Repeaters.
Comments are accepted until Sept. 18, 2023.Wireless, Safety, EMC, Cyber Security
Brazil
7/5/2023
Brazil: Anatel Publishes Technical Requirements for Conformity Assessment of Smart TV Boxes
On July 5, 2023, the National Telecommunications Agency (Anatel) published Act No. 9281, approving the technical requirements for assessing the conformity of the smart TV box product type.- July 2023 updates
Regulation Country Published Date Summary Cosmetics Europe 7/28/2023 EC Issues Commission Regulation (EU) 2023/1545 of 26 July 2023 amending Regulation (EC) No 1223/2009 of the European Parliament and of the Council as regards labelling of fragrance allergens in cosmetic products
The European Commission (EC) has issued Commission Regulation (EU) 2023/1545 amending Cosmetic Regulation regarding labelling of fragrance allergens in cosmetic products.
This Regulation adds many new allergenic fragrances that shall be labelled on the ingredients list of cosmetic products. It also updates existing entries on fragrance allergens (related to the identification of substances).
Application dates: most of the new requirements apply from 31 July 2026 for placing on the market of cosmetic products and from 31 July 2028 for making available on the market.Consumer Products Europe 6/9/2023 EC Releases Regulation (EU) 2023/1115 on Certain Commodities and Products Associated with Deforestation and Forest Degradation
The European Commission (EC) has released Regulation (EU) 2023/1115 on certain commodities and products associated with deforestation and forest degradation.
This Regulation lays down rules regarding the placing and making available and export on the Union market of a list of commodities (like wood, cocoa, cattle, coffee, palm oil, rubber, soy) and products produced with such commodities: various food products (including chocolate), various products made from wood.
The concerned commodities and products shall be deforestation-free, produced according to local legislation and covered by a due diligence statement.
Application dates of most requirements: December 30, 2024 or later.Hardlines Europe 7/28/2023 EC Issues Regulation (EU) 2023/1542 of the European Parliament and of the Council of 12 July 2023 concerning batteries and waste batteries
The European Commission (EC) has issued Regulation (EU) 2023/1542 of the European Parliament and of the Council of 12 July 2023 concerning batteries and waste batteries.
This regulation lays down requirements on sustainability, safety, labeling, marking and information to allow the placing on the market or putting into service of batteries within the Union. It also lays down minimum requirements for extended producer responsibility, the collection and treatment of waste batteries and for reporting.
This Regulation imposes battery due diligence obligations on economic operators placing batteries on the market or putting them into service.Chemicals Global 7/18/2023 ISO Publishes ISO 11936:2023 Leather — Determination of total content of certain bisphenols
The International Organization for Standardization (ISO) has published ISO 11936:2023 Leather — Determination of total content of certain bisphenols.
This document specifies a method for determining the total content (solvent extractible) of the following bisphenols in leather:
— bisphenol A;
— bisphenol B;
— bisphenol F;
— bisphenol S.
This method requires the use of liquid chromatography (LC) with either a single quadrupole mass spectrometer (MS), a triple quadrupole mass spectrometer (MS/MS), an ultraviolet (UV) detector, a diode array detector (DAD) or a fluorescence detector (FLD) to identify and quantify the bisphenols.Chemicals USA 5/31/2023 USA – Washington adopts rule on safer products restrictions and reporting for several consumer products
On May 31, 2023, the Department of Ecology, State of Washington, adopted a new rule, Chapter 173-337 WAC — Safer Products Restrictions and Reporting. This new chapter establishes a regulatory program to reduce toxic chemicals in consumer products and increase product ingredient transparency.Chemicals USA 6/8/2023 USA – Maine DEP amends notification requirement in PFAS-containing products law
On June 8, 2023, the Maine Department of Environmental Protection (DEP) published Act to Support Manufacturers whose Products Contain Perfluoroalkyl and Polyfluoroalkyl Substances.
Please contact your local UL Solutions office for more information.Chemicals China 6/6/2023 China MEE implements regulations on POPs added to Stockholm Convention
On June 6, 2023, the China Ministry of Ecology and Environment (MEE) announced the implementation of regulation on chemicals that have been added to the Stockholm Convention on Persistent Organic Pollutants (POPs). The chemicals subject to the draft regulations are:
1. Hexachlorobutadiene (HCBD)
2. Pentachlorophenol (PCP) and its salts and esters
3. Polychlorinated naphthalenes (PCNs)
4. Decabromodiphenyl ether (decaBDE)
5. Short-chain chlorinated paraffins (SCCPs)Chemicals, F Gas South Korea 4/18/2023 South Korea MoTIE announces enforcement of act on the management of specific substances for the protection of the ozone layer (Ozone Layer Protection Act)
On April 18, 2023, the Ministry of Trade, Industry and Energy (MoTIE) announced enforcement of Global Warming Substances (HFCs) Regulation to regulate the HFCs according to the Kigali Amendment.REACH, Chemicals EU 6/14/2023 European Union ECHA adds two hazardous chemicals to Candidate List
On June 14, 2023, the European Chemicals Agency (ECHA) added two hazardous chemicals to Candidate List:
1. Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (CAS 75980-60-8)
2. Bis(4-chlorophenyl) sulphone (CAS 80-07-9)
Importers and producers of articles have six months to notify ECHA if their article contains a Candidate List substance.Cyber Security India 6/12/2023 India TEC extends timelines for mandatory security testing of WiFi CPE and IP router under MTCTE
On June 12, 2023, the Telecommunication Engineering Centre (TEC), published Notification No. 1-6/2022-TC/TEC regarding the extension of mandatory security testing of WiFi CPE and IP Router under Mandatory Testing and Certification of Telecommunication Equipment (MTCTE).Electrical and Electronic Waste Australia 6/20/2023 Australia DCCEEW launches discussion paper on potential e-waste regulation for small electrical products and solar photovoltaic systems
On June 20, 2023, the Department of Climate Change, Energy, the Environment and Water (DCEEW) launched a discussion paper on a potential regulation on waste from small electrical products and solar photovoltaic systems.
The goals of the regulation are:
- Reduce waste to landfill
- Increase the recovery of reusable materials
- Provide convenient access to e-stewardship services across Australia
- Support Australia’s transition to a more circular economy
- Foster shared responsibility across the lifecycle of covered products.
Feedback is accepted until July 23, 2023.EMC China 5/29/2023 China CQC issues notice on the implementation of the new EMC standard for the CQC voluntary certification of household and similar electrical appliances (008) and other two categories
On May 29, 2023, the China Quality Certification Centre (CQC) issued a notice on the implementation of the new standard GB 17625.1-2022 and revised certification rules for the CQC voluntary certification of household appliances and similar electrical appliances (CQC product category 008), gas appliances (CQC product category 041) and household appliance accessories (CQC product category 002).EMC China 6/1/2023 China CQC issues notice on the implementation of the new EMC standard requirements for voluntary certification of lighting electrical products
On June 1, 2023, the China Quality Certification Centre (CQC) issued a notice on the implementation of the new version of the standard GB 17625.1-2022 and revised certification rules for the CQC voluntary certification of lighting electrical products (CQC product category 004 and 010).EMC, Energy Efficiency, RoHS, Safety, Chemicals Taiwan 6/2/2023 Taiwan BSMI, MOEA issues draft regulation for mandatory BSMI certification requirements of portable air conditioners
On June 2, 2023, the Bureau of Standards, Metrology and Inspection (BSMI) of the Ministry of Economic Affairs (MOEA) issued draft Legal Inspection Requirements for Portable Air Conditioners Appliances Products to include portable air conditioners into the BSMI certification scope for public comments until Aug. 1, 2023.EMC, Performance, Safety, Wireless India 6/23/2023 India TEC notifies products under phase V of MTCTE scheme
On June 23, 2023, the Telecommunication Engineering Centre (TEC) published Notification No. 5-2/2021-TC/TEC/165 regarding the notification of products under phase V of Mandatory Testing and Certification of Telecommunications Equipment (MTCTE) scheme.EMC, Performance, Safety, Wireless India 6/23/2023 India TEC extends timelines for mandatory certification of phase III and IV products under MTCTE Scheme
On June 23, 2023, the Telecommunication Engineering Centre (TEC) published Notification No. 5-2/2021-TC/TEC/164 regarding the extension of timelines for mandatory certification of Phase-III and IV products under Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.EMC, RoHS, Safety, Energy Efficiency, Chemicals Taiwan 5/29/2023 Taiwan BSMI issues draft amendments to the legal inspection requirements of BSMI certification for freezers
On May 29, 2023, the Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic Affairs (MOEA) issued a draft amendment to Legal Inspection Requirements for Household Electrical Appliances, extending the scope of the BSMI certification of upright freezers for public consultation until July 28, 2023.EMC, Safety Japan 5/1/2023 Japan METI partially revises list of standards harmonized with IEC standards used in conformity assessment
On May 1, 2023, the Ministry of Economy, Trade and Industry (METI) partially revised the Appendix 12 of the Interpretation of Ministerial Ordinance for Establishing Technical Requirements for Electrical Appliances and Materials (adoption of harmonized standards).EMC, Safety, Performance China 5/30/2023 China CQC issues three new voluntary certification rules for air cleaner (purifier) replacing the old rules CQC64-448157-2014
On May 30, 2023, the China Quality Certification Centre (CQC) issued an announcement on the implementation of the new certification rules for safety and electromagnetic compatibility, sterilization and purification, energy saving and environmental protection for air cleaner (purifier), which will be effective on the same day.EMC, Wireless South Korea 5/18/2023 South Korea RRA opens public consultation on partial revision of equipment for electromagnetic wave strength and absorption rate measurement
On May 18, 2023, the South Korean National Radio Research Agency (RRA) opened a public consultation on the partial revision of equipment subject to measurement of electromagnetic wave strength and electromagnetic wave absorption rate under National Radio Research Agency Announcement No. 2023-40.
Comments were accepted until June 19, 2023.Energy Efficiency Australia, New Zealand 5/26/2023 Australia and New Zealand Publish AS/NZ IEC 62552.1:2018 A1 – General Requirements for Household Refrigerating Appliances Characteristic and Test Methods
On May 26, 2023, the Standards Australia and New Zealand published AS/NZ IEC 62552.1:2018 A1. This standard deals with household refrigerating appliances – characteristics and test methods: general requirements.Energy Efficiency Jordan 5/30/2023 Jordan JSMO prepares draft technical regulation on eco-design and labeling requirements for electronic displays
On May 30, 2023, the Jordan Standards and Metrology Organization (JSMO) prepared a draft technical regulation on eco-design and labeling requirement for electronic displays.
The deadline for comments was July 14, 2023.Energy Efficiency USA 5/26/2023 USA DOE Publishes final rule for the energy conservation standards for room air conditioners
On May 26, 2023, the U.S. Department of Energy (DOE) published a final rule regarding the energy conservation standards for room air conditioners.
DOE is implementing amended room air conditioner energy efficiency standards. It has concluded that the amended energy conservation standards for these products would result in significant conservation of energy and are technologically feasible and economically justified.Energy Efficiency Thailand 5/29/2023 Thailand publishes notification on update of energy efficiency standard for room air conditioners
On May 29, 2023, the Ministry of Industry published a notification on the issuance of a new standard for energy efficiency of room air conditioners and the cancellation of the old edition.Energy Efficiency USA 5/30/2023 USA DOE publishes final rule for the energy conservation standards for consumer pool heaters
On May 30, 2023, the U.S. Department of Energy (DOE) published a final rule regarding the energy conservation standards for pool heaters.
DOE is adopting new and amended energy conservation standards for consumer pool heaters. It has concluded that the amended energy conservation standards for these products would result in significant conservation of energy and are technologically feasible and economically justified.Energy Efficiency Jordan 5/30/2023 Jordan JSMO prepares draft technical regulation on eco-design and energy labeling requirements for refrigerating appliances
On May 30, 2023, the Jordan Standards and Metrology Organization (JSMO) prepared a draft technical regulation on eco-design and energy labeling of refrigerating appliances.
The deadline for comments was July 14, 2023.Energy Efficiency Jordan 5/30/2023 Jordan JSMO prepares draft technical regulation on eco-design and energy labeling requirements for light sources and separate control gears
On May 30, 2023, the Jordan Standards and Metrology Organization (JSMO) prepared a draft technical regulation on eco-design and energy labeling requirements for light sources and separate control gears.
The deadline for comments was July 14, 2023.Energy Efficiency Jordan 5/30/2023 Jordan JSMO prepares draft technical regulation on framework for energy labeling
On May 30, 2023, the Jordan Standards and Metrology Organization (JSMO) prepared a draft technical regulation on framework for energy labeling.
The deadline for comments was on July 14, 2023.Energy Efficiency USA 6/1/2023 USA DOE publishes proposed rule for the energy conservation standards for electric motors
On June 1, 2023, the U.S. Department of Energy (DOE) published a proposed rulemaking regarding the energy conservation standards for electric motors.
DOE will accept comments, data, and information regarding this NOPR no later than Sept. 19, 2023.Energy Efficiency USA 6/2/2023 USA DOE publishes final rule of the test procedure for commercial warm air furnaces
On June 2, 2023, the U.S. Department of Energy (DOE) published a final rule of the test procedure for commercial warm air furnaces.
In this final rule, the following are the changes:
- Adopting the most recent versions of industry test standards by amending the Federal test procedures for commercial warm air furnaces (CWAFs);
- Establishing a new metric, Thermal Efficiency Two (TE2), and corresponding test procedure; and
- Adopting additional specifications for CWAFs with multiple flue outlets or small flue outlets.Energy Efficiency USA 6/2/2023 USA DOE publishes final rule of the energy conservation standards for computer room air conditioners
On June 2, 2023, the U.S. Department of Energy (DOE) published a final rule of the energy conservation standards for computer room air conditioners.
For air conditioners in computer rooms, the Department of Energy (DOE) is enacting new energy conservation standards that use a new efficiency metric and are equivalent to the levels outlined in ASHRAE standard 90.1-2019.Energy Efficiency USA 6/2/2023 USA DOE publishes final rule of the energy conservation standards for air cooled, three-phase, small commercial air conditioners and heat pumps
On June 2, 2023, the U.S. Department of Energy (DOE) published a final rule of the energy conservation standards of air cooled, three-phase, small commercial air conditioners and heat pumps with a cooling capacity of less than 65,000 Btu/h and air-cooled, three-phase, variable refrigerant flow air conditioners and heat pumps with a cooling capacity of less than 65,000 Btu/h.Energy Efficiency Israel 5/22/2023 Israel MOE informs stakeholders for interim period of energy rating labels
The Ministry of Energy (MOE) informed stakeholders for the interim period regarding energy rating labels.
The notice is valid until June 30, 2024.Energy Efficiency Serbia 4/28/2023 Serbian amends regulation on energy labeling of products
On April 28, 2023, the Government of the Republic of Serbia published a regulation amending the regulation on energy labeling of products affecting energy consumption to ensure that the QR code on the product energy label contains the required information in Serbian language, effective May 1, 2023.Energy Efficiency Saudi Arabia 6/8/2023 Saudi Arabia SASO announces update for application of energy efficiency labels
On June 8, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) announced an update in application of energy efficiency labels for manufacturer or importer accounts.
Please contact your local UL Solutions office for more information.Energy Efficiency Serbia 6/2/2023 Serbia issues new eco-design requirements for household dishwashers
On June 2, 2023, the Ministry of Mining and Energy published a new regulation on eco-design requirements for household dishwashers (Official Gazette of RS No. 45 of June 2, 2023, page 56) to harmonize with the European legislation effective June 10, 2023, and applicable from June 1, 2024.Energy Efficiency Serbia 6/2/2023 Serbia issues new eco-design requirements for household washing machines and washer-dryers
On June 2, 2023, the Ministry of Mining and Energy published the new regulation on eco-design requirements for household washing machines and household washing and drying machines (Official Gazette of RS No. 45 of June 2, 2023, page 61) to harmonize with the European legislation effective June 10, 2023, and applicable from June 1, 2024.Energy Efficiency Serbia 6/6/2023 Serbia proposes eco-design requirements for standby and off mode electric power consumption of electrical and electronic household and office equipment
On June 6, 2023, the Ministry of Mining and Energy issued a notice on the draft regulations or rulebook on eco-design requirements for standby and off mode, and networked standby, electric power consumption of electrical and electronic household and office equipment, which is under preparation and open for comments until July 5, 2023.
The proposed date of application of the regulations is March 1, 2024.Energy Efficiency Serbia 6/6/2023 Serbia proposes eco-design requirements for simple set-top boxes
On June 6, 2023, the Ministry of Mining and Energy issued a notice on the draft regulations or rulebook on eco-design requirements for simple set-top boxes, which is under preparation and open for comments until July 5, 2023.
The proposed date of application of the regulations on March 1, 2024.Energy Efficiency USA 6/13/2023 USA DOE publishes final rule of the test procedure for portable electric spas
On June 13, 2023, the U.S. Department of Energy (DOE) published a final rule of the test procedure for measuring the standby loss for portable electric spas.Energy Efficiency Vietnam 5/24/2023 Vietnam publishes list of low-efficiency equipment subject to elimination
On May 24, 2023, the Ministry of Science and Technology (MOST) published Decision No. 14/2023/QD-TTg in relation to the list and road map of energy-consuming devices and equipment subject to elimination. With this circular, the energy efficiency standards for new equipment and existing product list in Decision No. 24/2018/QD-TTg dated May 18, 2018, were mandated.
This decision will be implemented immediately on July 15, 2023.Energy Efficiency USA 6/20/2023 USA DOE publishes final rule for the energy conservation standards for microwave ovens
On June 20, 2023, the U.S. Department of Energy (DOE) published a final rule for the energy conservation standards for microwave ovens. It has concluded that the amended energy conservation standards for these products are both technologically and economically feasible and would result in a significant amount of energy conservation.Energy Efficiency Oman 6/8/2023 Oman DGSM publishes list of products subject to new energy efficiency labeling requirements within technical regulation on conformity scheme
On June 8, 2023, the Directorate General for Standards and Metrology (DGSM) shared the list of products subject to new energy efficiency labeling requirements within technical regulation conformity scheme (Document No. MM-QM-1A-23).
Please contact your local UL Solutions office for more information.Energy Efficiency USA 6/21/2023 USA DOE publishes final rule of the test procedure for consumer water heaters and residential-duty commercial water heaters
On June 21, 2023, the U.S. Department of Energy (DOE) published a final rule for the test procedure of consumer water heaters and residential-duty commercial water heaters.
The following includes the changes in this final rule:
- Incorporates by reference the most recent edition of the industry testing standard for consumer water heaters and residential-duty commercial water heaters and adopts relevant portions of those standards into the Federal test procedure
- Expands the scope of coverage of the test procedure to apply to certain consumer water heater designs
- Add definitions for certain specialty water heaters
- Updates test conditions and tolerance requirements to reduce burden
- Clarify test set-up and installation methods
- Address the test conduct for products which can store water at temperatures above the delivery setpoint
- Establish an effective volume calculation
- Extend untested provisions to electric instantaneous water heaters.Energy Efficiency USA 6/22/2023 USA DOE publishes proposed rules for the energy conservation standards for ceiling fans
On June 22, 2023, the U.S. Department of Energy (DOE) published a proposed rule for the energy conservation standards for ceiling fans.
DOE will accept comments, data, and information regarding this NOPR no later than Aug. 21, 2023.Energy Efficiency Philippines 5/25/2023 Philippines DOE publishes implementing guidelines on Philippine energy labeling program for clothes washing machines
On May 25, 2023, the Department of Energy (DOE) published implementing guidelines on Philippine Energy Labeling Program for clothes washing machines.
These implementing guidelines including the Particular Product Requirements (PPR) and Code of Practice (COPE) were issued for the information and guidance of all those concerned and for compliance by all manufacturers, importers, distributors, dealers, retailers and other key stakeholders.Energy Efficiency Philippines 5/25/2023 Philippines DOE publishes implementing guidelines on Philippine energy labeling program for electric fans
On May 25, 2023, the Department of Energy (DOE) published implementing guidelines on Philippine Energy Labeling Program for electric fans. These implementing guidelines including the Particular Product Requirements (PPR) and Code of Practice (COPE) were issued for the information and guidance of all those concerned and for compliance by all manufacturers, importers, distributors, dealers, retailers, and other key stakeholders.Energy Efficiency India 6/23/2023 India BEE releases advisory for manufacturers and star label permittees of self-ballasted light emitting diode (LED) lamp
On June 23, 2023, the Bureau of Energy Efficiency (BEE) published important instructions to all manufacturers and permittees of self-ballasted light emitting diode (LED) lamp regarding upgradation of existing star rating table with validity period of three (03) years (July 1, 2023 to June 30, 2026).Energy Efficiency Mexico 6/22/2023 Mexico CONUEE approves UL Solutions as certification body for NOM-031-ENER-2019
On June 22, 2023, the National Commission for the Efficient Use of Energy (CONUEE) approved UL de Mexico, S.A. DE C.V. as a product certification body for NOM-031-ENER-2019.
NOM-031-ENER-2019 – Energy Efficiency for LED Luminaires for Lighting of Roads and Outdoor Public Areas. Specifications and Test Methods. Modalities: M1 and M2
Please contact your local UL Solutions office for more information.Energy Efficiency, Performance Australia, New Zealand 5/19/2023 Australia and New Zealand published Amendment 1 of AS/NZS IEC 62552.2:2018 & AS/NZS IEC 62552.3:2018 – Performance and Energy Consumption of Household Refrigerating Appliances
On May 19, 2023, the Standards Australia and New Zealand published Amendment 1 of AS/NZS IEC 62552.2:2018 and AS/NZS IEC 62552.3:2018.
AS/NZS IEC 62552.2:2018 A1 – Household Refrigerating Appliances -
Characteristics and Test Methods, Part 2: Performance Requirements
AS/NZS IEC 62552.3:2018 A1 – Household Refrigerating Appliances -
Characteristics and Test Methods, Part 3: Energy Consumption and VolumeEnergy Efficiency, Performance Israel 6/7/2023 Israel SII prepares draft standard SI 62442 Part 1 – Energy Performance of Controlgear for Fluorescent Lamps
On June 7, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 62442 Part 1 for energy performance of lamp controlgear: controlgear for fluorescent lamps – method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear.
Comments and feedback were accepted until July 5, 2023.Energy Efficiency, Performance Canada 6/8/2023 Canada SCC reaffirmation of CAN/CSA-C804-18 – Energy Performance of Refrigerated Bottled or Canned Beverage Vending Machines
On June 8, 2023, the Standards Council of Canada (SCC) started the review on CAN/CSA-C804-18. This standard deals with the energy performance of refrigerated bottled or canned beverage vending machines.
Comments were accepted until July 5, 2023.Energy Efficiency, Performance, Noise Bahrain 5/30/2023 Bahrain MoIC approves energy efficiency regulations for household and commercial air conditioners
Bahrain Testing and Metrology Directorate (BTMD) announced the approval of 2 energy efficiency technical regulations for household and commercial air conditioners, that are now at the final stage of publication by the Ministry of Industry and Commerce (MoIC).
Please contact your local UL Solutions office for more information.Energy Efficiency, RoHS, Safety, Explosive Atmospheres United Arab Emirates 6/26/2023 UAE MoIAT publishes draft ministerial decision regarding national standards logos and conformity marks, energy efficiency and environmental performance labels
On June 26, 2023, the Ministry of Industry and Advanced Technology (MoIAT) published a draft ministerial decision regarding new national standards logo and conformity marks, energy efficiency and environmental performance labels.
Comments and suggestions can be sent until Aug. 25, 2023.Energy Efficiency, Safety United Kingdom, EU 5/17/2023 United Kingdom announces amendment on the Retained EU Law (Revocation and Reform) Bill
On May 17, 2023, the Government of U.K. announced that the Retained EU Law (REUL) will be amended. Changes will be tabled to replace the current sunset in the Bill with a list of retained EU laws that are intended to revoke under the Bill at the end of 2023.Energy Efficiency, Safety China 5/23/2023 China SAC publishes 14 mandatory national standards and four mandatory national standard amendments including gas burning appliances and displays
On May 23, 2023, the Standardization Administration of China (SAC) of the State Administration for Market Regulation of the People's Republic of China (SAMR) published the Announcement No. 3 of 2023 to approve 14 mandatory national standards and four mandatory national standard amendments for a wide range of products and materials which included safety and energy efficiency requirement for gas burning appliances and displays.Energy Efficiency, Safety, Wireless Mexico 5/25/2023 Mexico SE publishes announcement regarding the cancellation of importation folios
On May 25, 2023, the Secretary of Economy issued a document that eliminates the ability to apply for Importation Folios, a mechanism that permits clients to import their non-certified products as long as those products are undergoing certification or testing with an accredited certification body or laboratory.Explosive Atmospheres United Kingdom 6/20/2023 United Kingdom issues Notice of Publication 0082/23 for the designated standards for equipment for explosive atmospheres
On June 20, 2023, the Government of U.K. released Notice of Publication 0082/23.
Standards for equipment and protective systems intended for use in potentially explosive atmospheres in support of the equipment and protective systems intended for use in potentially explosive atmospheres regulations 2016 (S.I. 2016/1107) has been amended.Explosive Atmospheres Vietnam 6/20/2023 Vietnam MOIT prepares draft technical regulation on safety of explosion-proof electric motors used in underground mine
On June 20, 2023, the Ministry of Industry and Trade (MOIT) prepared draft technical on safety of explosion-proof electric motors used in underground mines. This technical regulation prescribes technical safety and management requirements for electric motors used in underground mines with combustible gas and explosive dust.
Any comments on this draft can be sent to the Department of Safety Techniques and Industrial Environment – Ministry of Industry and Trade until Aug. 19, 2023.Explosive Atmospheres Vietnam 6/20/2023 Vietnam MOIT prepares draft technical regulation on safety of explosion-proof electrical cables used in underground mine
On June 20, 2023, the Ministry of Industry and Trade (MOIT) prepared draft technical on safety of explosion-proof electrical cables used in underground mines. This draft technical specifies the technical safety and management requirements for electric cables used in underground mines with combustible gas and explosive dust.
Any comments on this draft can be sent to the Department of Safety Techniques and Industrial Environment – Ministry of Industry and Trade until Aug. 19, 2023.F Gas, Chemicals USA 6/19/2023 USA – California CARB publishes reminder for air conditioning and variable refrigerant flow equipment manufacturers: R4 Program Baseline Report
On June 19, 2023, the California Air Resources Board (CARB) published a reminder related to prohibition on certain hydrofluorocarbons in stationary refrigeration, chillers, aerosols-propellants, and foam end-uses regulation under its HFC Regulation.F Gas, Chemicals China 6/12/2023 China MEE publishes notice on the issuance of the recommended list of substitutes for ozone depleting substances in China
On June 12, 2023, the Ministry of Ecology and Environment published a list of recommended replacements for ozone-depleting substances.Noise Australia, New Zealand 5/26/2023 Australia and New Zealand publish AS/NZS 60076.10.1:2023 – Determination of Sound Levels for Power Transformers
On May 26, 2023, Standards Australia and New Zealand published AS/NZS 60076.10.1:2023. This standard is the application guide for determining the sound levels of power transformers.Performance Canada 5/19/2023 Canada SCC publishes new standard C868 – Performance of LED Replacements for Tubular Fluorescent Lamps
On May 19, 2023, the Standards Council of Canada (SCC) published a new standard C868. This standard deals with the performance of LED replacements for tubular fluorescent lamps.
Comments were accepted until June 20, 2023.Performance Israel 6/11/2023 Israel SII prepares draft standard SI 4064 Part 1 Amendment No. 1 – Water Meters for Cold Potable and Hot Water
On June 11, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 4064 Part 1 Amendment 1 for water meters for cold potable water and hot water: metrological and technical requirements.
Comments and feedback were accepted until July 2, 2023.Performance Israel 6/11/2023 Israel SII prepares draft standard SI 4064 Part 2 Amendment No. 1 – Water Meters for Cold Potable and Hot Water
On June 11, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 4064 Part 2 Amendment 1 for water meters for cold potable water and hot water: test methods.
Comments and feedback were accepted until July 2, 2023.Performance Israel 6/11/2023 Israel SII prepares draft standard SI 4064 Part 3 Amendment No. 1 – Water Meters for Cold Potable and Hot Water
On June 11, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 4064 Part 3 Amendment 1 for water meters for cold potable water and hot water: test report format.
Comments and feedback were accepted until July 2, 2023.Performance EU 6/16/2023 European Union CENELEC publishes new standard EN IEC 61300-3-4:2023 – Fiber Optic Interconnecting Devices and Passive Components
On June 16, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61300-3-4:2023 for examinations and measurements – attenuation of fiber optic interconnecting devices and passive components.
The date of withdrawal of superseded version is June 13, 2024.Performance, Sustainability Israel 5/21/2023 Israel SII publishes draft standards SI 60095 Parts 1 and 7 on general requirements and test methods for lead-acid type starter batteries
On May 21, 2023, the Standards Institution of Israel (SII) published draft
standards series that apply to lead-acid starter batteries. The parts of the series are:
- SI 60095 Part 1 – Lead-acid Type Starter Batteries: General Requirements and Testing Methods; and
- SI 60095 Part 7 – Lead-acid Type Starter Batteries: General Requirements and Testing Methods for Motorcycle Batteries.
Comments were accepted until June 18, 2023.Performance, Wireless EU 6/9/2023 European Union CENELEC publishes new standard EN IEC 61980-2:2023 – electric vehicle wireless power transfer (WPT) systems
On June 9, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61980-2:2023 for electric vehicle wireless power transfer MF-WPT system communication and activities.
The date of withdrawal of superseded version is June 7, 2026.RoHS, Chemicals EU 6/9/2023 European Union CENELEC publishes EN IEC 62321-3-4:2023 screening of phthalates in polymers of electrotechnical products by HPLC-UV, TLC and TD-MS in electrotechnical products
On June 9, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published EN IEC 62321-3-4:2023 Determination of Certain Substances in Electrotechnical Products – Screening – Phthalates in Polymers of Electrotechnical Products by High Performance Liquid Chromatography with Ultraviolet Detector (HPLC-UV), Thin Layer Chromatography (TLC) and Thermal Desorption Mass Spectrometry (TD-MS).RoHS, Chemicals United Kingdom 6/14/2023 United Kingdom DEFRA publishes Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (Amendment) Regulations 2023
On June 14, 2023, the Department for Environment, Food and Rural Affairs (DEFRA) published SI 2023/658 Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (Amendment) Regulations 2023.RoHS, Chemicals EU 6/27/2023 European Union EC publishes draft Directive on RoHS exemption for lead and cadmium in recovered polyvinyl chloride in electric doors and windows
On June 27, 2023, the European Commission (EC) published a draft Directive on RoHS exemption for lead and cadmium in recovered polyvinyl chloride in electric doors and windows.
Feedback are accepted until July 25, 2023.RoHS, Safety Saudi Arabia 6/9/2023 Saudi Arabia SASO amends technical regulations for doors and windows, and amusement park equipment and games
On June 9, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) amended technical regulations for doors, windows and their accessories, and amusement parks games and devices.Safety Israel 5/22/2023 Israel SII prepares draft standard SI 60335 Part 2.103 – drives for gates, doors and windows
On May 22, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 60335 Part 2.103 for drives for gates, doors and windows.
Comments and feedback were accepted until June 19, 2023.Safety Tanzania 4/28/2023 Tanzania TBS prepares draft standard DTZS EDC2 (2191) – Lead Acid Starter Batteries Dimensions of Batteries and Marking of Terminals
On April 28, 2023, the Tanzania Bureau of Standards (TBS) prepared draft DTZS EDC2 (2191)) in reference to IEC 60095-2: 2021, dimension of batteries and dimensions and marking of terminals.
The deadline for comments and suggestions is June 28, 2023.Safety Tanzania 4/28/2023 Tanzania TBS prepares draft standard DTZS EDC2 (2192) – Lead Acid Starter Batteries Dimensions of Batteries for Heavy Vehicles
On April 28, 2023, the Tanzania Bureau of Standards (TBS) prepared draft DTZS EDC2 (2192) in reference to IEC 60095-4: 2021, dimension of batteries for heavy vehicles.
The deadline for comments and suggestions is June 28, 2023.Safety Australia 2/17/2023 Australia and New Zealand publish AS IEC 62619:2023 – Safety Requirements for Secondary Lithium Cells and Batteries for Industrial Applications
On Feb. 17, 2023, the Standards Australia and New Zealand published a new standard AS IEC 62619:2023. This standard deals with the safety requirements for secondary lithium cells and batteries, for use in industrial applications.Safety Australia, New Zealand 5/19/2023 Australia and New Zealand publish various standards for plugs, socket-outlets, vehicle connectors and vehicle inlets – AS/NZS IEC 62619 standards
On May 19, 2023, the Standards Australia and New Zealand released various standards for plugs, socket-outlets, vehicle connectors and vehicle inlets.
AS/NZS 62196.1:2023 Plugs, Socket-outlets, Vehicle Connectors and Vehicle Inlets – Conductive Charging of Electric Vehicles – Part 1: General Requirements
AS/NZS IEC 62196.2:2023 Plugs, Socket-outlets, Vehicle Connectors and Vehicle Inlets – Conductive Charging of Electric Vehicles – Part 2: Dimensional Compatibility Requirements for AC Pin and Contact-tube Accessories
AS/NZS IEC 62196.3:2023 Plugs, Socket-outlets, Vehicle Connectors and Vehicle Inlets – Conductive Charging of Electric Vehicles – Part 3: Dimensional Compatibility Requirements for DC and AC/DC Pin and Contact-tube Vehicle Couplers
AS/NZS IEC 62196.6:2023 Plugs, Socket-outlets, Vehicle Connectors and Vehicle Inlets – Conductive Charging of Electric Vehicles Dimensional Compatibility Requirements for DC Pin and Contact-tube Vehicle Couplers Intended to be Used for DC EV Supply Equipment where Protection Relies on Electrical SeparationSafety Global, CB Scheme 5/26/2023 IECEE adds new test report forms (TRFs) on week 21
On May 26, 2023, TRFs were published and added to the IECEE website.Safety Global 5/26/2023 IEC publishes new standard IEC 62368-1:2023 – Safety Requirements for Audio/video, Information and Communication Technology Equipment
On May 26, 2023, the International Electrotechnical Commission (IEC) released IEC 62368-1:2023. This standard deals with the safety requirements of audio/video, information, and communication technology equipment.Safety Israel 5/23/2023 Israel SII prepares draft standard SI 60730 Part 2.9 – Temperature Sensing Control
On May 23, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 60730 Part 2.9 for automatic electrical temperature sensing control.
Comments and feedback were accepted until June 20, 2023.Safety Global 6/1/2023 IEC Publishes new standard IEC 62208:2023 – General Requirements for Empty enclosures for Low-Voltage Switchgear and Controlgear Assemblies
On June 1, 2023, the International Electrotechnical Commission (IEC) released IEC 62208:2023. This standard deals with the safety requirements of low voltage switchgear and control gear assemblies.Safety South Africa 5/23/2023 South Africa SABS publishes draft standard SANS 60884-1:2023 Ed. 3 Plugs and Socket-outlets for Household and Similar Purposes Part 1: General Requirements
On May 23, 2023, the South African Bureau of Standards (SABS) published draft standard SANS 60884-1:2023 Edition 3 Plugs and Socket-outlets for Household and Similar Purposes Part 1: General Requirements.
The closing date is July 22, 2023.Safety South Africa 5/23/2023 South Africa SABS publishes draft standard SANS 60320-3 Ed. 1.2 Appliance Couplers for Household and Similar General Purposes Part 3: Standard Sheets and Gauges
On May 23, 2023, the South African Bureau of Standards (SABS) published draft standard SANS 60320-3 Edition 1.2 Appliance Couplers for Household and Similar General Purposes Part 3: Standard Sheets and Gauges.
The closing date is July 22, 2023.Safety South Africa 5/23/2023 South Africa SABS publishes draft standard SANS 60799 Ed. 2.1 Electrical Accessories – Cord Sets and Interconnection Cord Sets
On May 23, 2023, the South African Bureau of Standards (SABS) published draft standard SANS 60799 Ed. 2.1 Electrical Accessories – Cord Sets and Interconnection Cord Sets.
The closing date for comments is July 22, 2023.Safety EU 6/2/2023 European Union CENELEC publishes amended standard EN 60335-2-31:2014/A1:2023 – Range Hoods and other Cooking Fume Extractors
On June 2, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60335-2-31:2014/A1:2023 for household and similar electrical appliances safety particular requirements for range hoods and other cooking fume extractors.Safety EU 6/2/2023 European Union CENELEC publishes amended standard EN 60335-2-31:2014/A2:2023 – Range Hoods and other Cooking Fume Extractors
On June 2, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60335-2-31:2014/A2:2023 for household and similar electrical appliances safety particular requirements for range hoods and other cooking fume extractors.Safety EU 6/2/2023 European Union CENELEC publishes amended standard EN 60335-2-31:2014/A11:2023 – Range Hoods and other Cooking Fume Extractors
On June 2, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60335-2-31:2014/A11:2023 for household and similar electrical appliances safety particular requirements for range hoods and other cooking fume extractors.Safety Saudi Arabia 6/1/2023 Saudi Arabia SASO implements new portal MANEH for SASO Quality Mark (SQM)
On June 1, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) implemented a new platform MANEH for SASO Quality Mark (SQM).Safety EU 6/2/2023 European Union CENELEC publishes amended standard EN 60335-2-52:2003/A2:2023 – Oral Hygiene Appliances
On June 2, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60335-2-52:2003/A2:2023 for household and similar electrical appliances safety particular requirements for oral hygiene appliances.Safety EU 6/2/2023 European Union CENELEC publishes amended standard EN 60335-2-52:2003/A13:2023 – Oral Hygiene Appliances
On June 2, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60335-2-52:2003/A13:2023 for household and similar electrical appliances safety particular requirements for oral hygiene appliances.Safety EU 6/2/2023 European Union CENELEC publishes amended standard EN 60335-2-53:2011/A1:2023 – Sauna Heating Appliances and Infrared Cabins
On June 2, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60335-2-53:2011/A1:2023 for household and similar electrical appliances safety particular requirements for sauna heating appliances and infrared cabins.Safety EU 6/2/2023 European Union CENELEC publishes amended standard EN 60335-2-53:2011/A2:2023 – Sauna Heating Appliances and Infrared Cabins
On June 2, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60335-2-53:2011/A2:2023 for household and similar electrical appliances safety particular requirements for sauna heating appliances and infrared cabins.Safety EU 6/2/2023 European Union CENELEC publishes amended standard EN 60335-2-53:2011/A11:2023 – Sauna Heating Appliances and Infrared Cabins
On June 2, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60335-2-53:2011/A11:2023 for household and similar electrical appliances safety particular requirements for sauna heating appliances and infrared cabins.Safety Canada 5/16/2023 Canada SCC reaffirmation of standard for general service directional lamps
On May 16, 2023, the Standards Council of Canada (SCC) initiated a review on the standard CAN/CSA-C875-13 Performance of General Service Directional Lamps.
Comments were accepted until June 14, 2023.Safety Global, CB Scheme 6/2/2023 IECEE adds new test report forms (TRFs) on Week 22
On June 2, 2023, the following TRFs were published and added to the IECEE website.
TRF No. TRF Originator IEC60384_14I SGS Fimko Ltd. JP_ND_IEC60335_2_45J JQA AU_NZ_ND_IEC60335_2_61G NZ Electrotechnical Committee/Standards New Zealand AU_NZ_ND_IEC60335_2_65M NZ Electrotechnical Committee/Standards New Zealand AU_NZ_ND_IEC60335_2_66B NZ Electrotechnical Committee/Standards New Zealand AU_NZ_ND_IEC60335_2_67I NZ Electrotechnical Committee/Standards New Zealand AU_NZ_ND_IEC60335_2_68J NZ Electrotechnical Committee/Standards New Zealand AU_NZ_ND_IEC60335_2_69K NZ Electrotechnical Committee/Standards New Zealand AU_NZ_ND_IEC60335_2_71B NZ Electrotechnical Committee/Standards New Zealand Safety Canada 5/17/2023 Canada SCC publishes new standard for gas-fired domestic illuminating appliances
On May 17, 2023, the Standards Council of Canada (SCC) opened the development of the standard CSA/ANSI Z21.42/CSA 2.15 for gas-fired domestic illuminating appliances. This will provide the industry with harmonized requirements for the gas-fired domestic illuminating appliances.
Comments were accepted until June 14, 2023.Safety Israel 6/5/2023 Israel MEI notifies changes in standards for kitchen appliances, blankets, pillows and similar flexible heating devices, and skin or hair care
On June 5, 2023, the Ministry of Economy and Industry (MEI) notified changes in standards for kitchen appliances, blankets, pads, clothing and similar flexible heating appliances and skin or hair care.
Comments and feedback were accepted until July 9, 2023.Safety EU 6/7/2023 European Union CEN publishes new standard EN 12309-1:2023 – Gas-fired Sorption Appliances
On June 7, 2023, the European Committee for Standardization (CEN) published a new standard EN 12309-1:2023 for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW – terms and definitions.
The date of withdrawal of superseded version is on Dec. 31, 2023.Safety Global 6/2/2023 IEC Publishes new standard IEC 60840:2020+AMD1:2023 CSV – Test
Methods and Requirements for Power Cables
On June 2, 2023, the International Electrotechnical Commission (IEC) released IEC 60840:2020+AMD1:2023 CSV. This standard deals with the test methods of power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV).Safety Global 6/6/2023 IEC publishes new standard IEC 60947-6-2:2020/COR2:2023 -
Multiple Function Equipment – Control and Protective Switching Devices
On June 6, 2023, the International Electrotechnical Commission (IEC) released IEC 60947-6-2:2020/COR2:2023. This standard deals with the control and protective switching devices of multiple function equipment.Safety Global 6/6/2023 IEC publishes new standard IEC 62471-7:2023/COR1:2023 – Light
Sources and Luminaires Primarily Emitting Visible Radiation
On June 6, 2023, the International Electrotechnical Commission (IEC) released IEC 62471-7:2023/COR1:2023. This standard deals with photobiological safety of lamps and lamp systems, particularly for light sources and luminaires primarily emitting visible radiation.Safety EU 6/9/2023 European Union CENELEC publishes amended Standard EN 60838-2-3:2017/A1:2023 – Lampholders for Double-capped Linear LED Lamps
On June 9, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60838-2-3:2017/A1:2023 for double-capped linear LED lampholders.Safety Canada 5/18/2023 Canada SCC publishes amendment of CAN/CSA-E60730-2-9:18 – Requirements for Temperature Sensing Controls
On May 18, 2023, the Standards Council of Canada (SCC) published amendment revision for the standard CAN/CSA-E60730-2-9:18. It deals with automatic electrical controls particular for the requirements of temperature sensing controls.
Comments were accepted until June 14, 2023.Safety Canada 5/18/2023 Canada SCC publishes new edition of CSA Z317.2 – Special Requirements for Heating, Ventilation, & Air-conditioning (HVAC) Systems
On May 18, 2023, the Standards Council of Canada (SCC), published new edition of Z317.2. This standard deals with the special requirements for heating, ventilation, and air-conditioning (HVAC) systems in health care facilities.
Comments were accepted until June 14, 2023.Safety Canada 5/18/2023 Canada SCC reaffirmation of standards for terrestrial photovoltaic (pv) modules
On May 18, 2023, the Standards Council of Canada (SCC) initiated a review on the following standards for terrestrial photovoltaic (PV) modules:
- CAN/CSA-IEC 61215-1-1:18 – Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval – Part 1-1: Special Requirements for Testing of Crystalline Silicon Photovoltaic (PV) Modules
- CAN/CSA-IEC 61215-1-2:18 – Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval – Part 1-2: Special Requirements for Testing of Thin-film Cadmium Telluride (CdTe) based Photovoltaic (PV) Modules
- CAN/CSA-IEC 61215-1-3:18 – Terrestrial photovoltaic (PV) modules – Design Qualification and Type Approval – Part 1-3: Special Requirements for Testing of Thin-film Amorphous Silicon based Photovoltaic (PV) Modules
- CAN/CSA-IEC 61215-1-4:18 – Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval – Part 1-4: Special Requirements for Testing of Thin-film Cu(In,Ga)(S,Se)2 based Photovoltaic (PV) Modules
- CAN/CSA-IEC 61215-1:18 – Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval – Part 1: Test Requirements
- CAN/CSA-IEC 61215-2:18 – Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval – Part 2: Test Procedures
Comments were accepted until June 14, 2023.Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.17:2023 – Safety Standard for Blankets, Pads, Clothing, and Similar Flexible Heating Appliances
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.17:2023. This standard deals with the requirements for blankets, pads, clothing, and similar flexible heating appliances.
The closing date for comments is July 21, 2023.Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.21:2023 – Safety Standard for Storage Water Heaters
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.21:2023. This standard deals with the requirements for storage water heaters.
The closing date for comments is July 21, 2023.Safety Global, CB Scheme 6/9/2023 IEC publishes new standard IEC 60076-22-7:2020/COR1:2023 -
Accessories and Fittings for Power Transformers
On June 9, 2023, the International Electrotechnical Commission (IEC) released IEC 60076-22-7:2020/COR1:2023. This standard deals with accessories and fittings of power transformers.Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.30:2015 Amendment 5:2023 – Safety Standard for Room Heaters
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.30 Amd 5:2023. This standard deals with the requirements for room heaters.
The closing date for comments is July 21, 2023.Safety Global, CB Scheme 6/9/2023 IECEE adds new test report forms (TRFs) on Week 23
On June 9, 2023, the following TRFs were published and added to the IECEE website.TRF No. TRF Originator AU_NZ_ND_IEC60335_2_72H NZ Electrotechnical Committee/Standards New Zealand EU_GD_IEC62423E_II IMQ S.p.A. EU_GD_IEC60598_2_18G_II IMQ S.p.A. EU_GD_IEC60335_2_90J Nemko Group AS JP_ND_IEC60335_2_89K TÜV Rheinland Japan Ltd. EU_GD_IEC60598_2_17G TÜV Rheinland LGA Products GmbH Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.85:2023 – Safety Standard for Fabric Steamers
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.85:2023. This standard deals with the requirements for fabric steamers.
The closing date for comments is July 21, 2023.Safety Canada 5/19/2023 Canada SCC publishes new standard C22.2 No. 354 – Digital Circuit Breakers
On May 19, 2023, the Standards Council of Canada (SCC) published new standard C22.2 No. 354, which deals with digital circuit breakers.
Comments were accepted until June 20, 2023.Safety Canada 5/24/2023 Canada SCC reaffirmation of standard CAN/CSA-C22.2 NO. 111-18 – General-use Snap Switches
On May 24, 2023, the Standards Council of Canada (SCC), started the review on CAN/CSA-C22.2 NO. 111-18, which deals with general-use snap switches.
Comments were accepted until June 20, 2023.Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.3:2023 – Safety Standard for Electric Irons
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.3:2023. This standard deals with the requirements for electric irons.
The closing date for comments is July 21, 2023.Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.16:2023 – Safety Standard for Food Waste Disposers
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.16:2023. This standard deals with the requirements for food waste disposers.
The closing date for comments is July 21, 2023.Safety Israel 6/12/2023 Israel SII prepares draft standard SI 6230 Amendment 1 – Electrically Powered Scooters
On June 12, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 6230 Amendment 1 for safety requirements and test methods electrically powered scooters.
Comments and feedback are accepted until July 12, 2023.Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.54:2023 – Safety Standard for Surface Cleaning Appliances Employing Liquid or Steam
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.54:2023. This standard deals with the requirements for surface-cleaning appliances for household use employing liquids or steam.
The closing date for comments is July 21, 2023.Safety Canada 5/30/2023 Canada SCC reaffirmation of CSA C22.2 NO. 745-2-36:95 (R2018) – Safety Requirements for Hand Motor Tools
On May 30, 2023, the Standards Council of Canada (SCC), started the review on CSA C22.2 NO. 745-2-36:95 (R2018). This standard deals with the safety of portable electric tools, particularly for hand motor tools.
Comments were accepted until June 27, 2023.Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.8:2023 – Safety Standard for Shavers, Hair Clippers and Similar Appliances
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.8:2023. This standard deals with the requirements for shavers, hair clippers and similar appliances.
Comments can be submitted until July 21, 2023.Safety United Kingdom 5/31/2023 United Kingdom issues Notice of Publication 0083/23 for the Designated Standards for Low Voltage Equipment
On May 31, 2023, the Government of U.K. released Notice of Publication 0083/23.
Standards for electrical equipment designed for use within certain voltage limits in support of the Electrical Equipment (Safety) Regulations 2016 (S.I. 2016/1101) has been amended. These are the designated standards under Electrical Equipment (Safety) Regulations. In order to comply with the legislations, manufacturers can choose whether or not to apply designated standards or parts thereof. Designated standards are not mandatory, but they can simplify the process in order to meet the essential requirements set by the legislations. For this reason, when designated standards exist, they are commonly used by manufacturers.Safety Global, CB Scheme 6/14/2023 IEC publishes new standard IEC 61869-1:2023 – General Requirements for Instrument Transformers
On June 14, 2023, the International Electrotechnical Commission (IEC) released IEC 61869-1:2023. This standard deals with the general requirements of instrument transformers.Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.107:2020 Amendment 1 – Safety Standard for Robotic Battery Powered Electrical Lawnmowers
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.107:2020 Amendment 1. This standard deals with the requirements for robotic battery powered electrical lawnmowers.
Comments can be submitted until July 21, 2023.Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.80:2016 Amendment 3 – Safety Standard for Fans
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.80:2016 Amendment 3. This standard deals with the requirements for fans.
Comments can be submitted until July 21, 2023.Safety Chile 6/6/2023 Chile SEC releases draft safety protocol for battery chargers for hand tools, lawn and garden machinery
On June 6, 2023, the Superintendency of Electricity and Fuels (SEC) published protocol PE No. 1/40:2023 which deals with the safety certification procedure for battery chargers for hand tools, lawn and garden machinery.
Submission of comments is until Aug. 5, 2023.Safety Serbia 6/8/2023 Serbia me issues latest list of Serbian standards in the field of general product safety
On June 8, 2023, the Ministry of Economy (ME) published Rulebook on Determining the List of Serbian Standards in the Field of General Product
Safety in the Official Gazette of RS No. 47 of June 8, 2023 (page 8), which
includes the new standard for audio/video, information and communication technology equipment (ICT) effective June 16, 2023, and applicable from July 1, 2023.Safety EU 6/16/2023 European Union CENELEC publishes corrigendum standard EN IEC
60309-1:2022/AC:2023-06 – Plugs, Fixed or Portable Socket-outlets and Appliance Inlets
On June 16, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard EN IEC 60309-1:2022/AC:2023-06 for plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes.Safety Global, CB Scheme 6/13/2023 IECEE adds new test report forms (TRFs) on Week 24
On June 13, 2023, TRFs were published and added to the IECEE website.Safety; Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 60335.2.114:2023 – Safety Standard for Personal e-Transporters
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 60335.2.114:2023. This standard deals with the requirements for personal e-transporters.
Comments can be submitted until July 21, 2023.Safety Australia, New Zealand 6/9/2023 Australia and New Zealand prepare draft AS/NZS 62841.4.6:2023 – Safety Standard for Garden Blowers, Garden Vacuums and Garden Blower/Vacuums
On June 9, 2023, the Standards Australia and New Zealand prepared draft standard DR AS/NZS 62841.4.6:2023. This standard deals with the requirements for electric garden blowers, garden vacuums and garden blower/vacuums.
Comments can be submitted until July 21, 2023.Safety Australia, New Zealand 6/20/2023 Australia and New Zealand EESS publish guidance for room heaters
On June 20, 2023, the Electrical Equipment Safety System (EESS) published a general guidance for room heaters to preclude connection via means of pins for direct insertion into socket outlets.Safety Global 6/19/2023 IEC publishes new standard IEC 60904-2:2023 – Requirements for Photovoltaic Reference Devices
On June 19, 2023, the International Electrotechnical Commission (IEC) released IEC 60904-2:2023. This standard deals with the requirements for photovoltaic reference devices.Safety India 6/12/2023 India BIS extends timelines for pilot project for parallel testing with additional products
On June 12, 2023, the Bureau of Indian Standards (BIS) extended timelines for pilot project for parallel testing of products and included two new product categories under pilot project.Safety Israel 6/19/2023 Israel SII prepares draft standard SI 20 Part 1 – Luminaires General
Requirements and Tests
On June 19, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 20 Part 1 for luminaires general requirements and tests.
Comments and feedback are accepted until July 17, 2023.Safety Israel 6/19/2023 Israel SII prepares draft standard SI 20 Part 2.22 – Luminaires for Emergency Lighting
On June 19, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 20 Part 2.22 Luminaires for Emergency Lighting.
Comments and feedback are accepted until July 17, 2023.Safety Israel 6/19/2023 Israel SII prepares draft standard SI 20 Part 2.4 Amendment 1 – Portable General Purpose Luminaires
On June 19, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 20 Part 2.4 Amendment Number 1 for portable general purpose luminaires.
Comments and feedback are accepted until July 17, 2023.Safety Mozambique 6/18/2023 Mozambique INNOQ, IP announces start of conformity assessment program for imported products
On June 18, 2023, the National Institute of Standardization and Quality, Public Institute (INNOQ, IP) published the Implementation Plan of the Programa de Avaliação da Conformidade or Conformity Assessment Program (PAC) to guarantee the quality of products imported into Mozambique. The program implementation plans are in phases, with Phase I starting on May 24, 2023.Safety EU 6/23/2023 European Union CENELEC publishes amended standard EN 62620:2015/A1:2023 – Secondary Lithium Cells and Batteries
On June 23, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 62620:2015/A1:2023 for secondary lithium cells and batteries for use in industrial applications.Safety Global, CB Scheme 6/23/2023 IEC publishes new standard IEC 61558-2-3:2023 – Requirements and Tests for Ignition Transformers for Gas and Oil Burners
On June 23, 2023, the International Electrotechnical Commission (IEC) released IEC 61558-2-3:2023. This standard deals with the requirements and tests for ignition transformers for gas and oil burners.Safety Global, CB Scheme 6/23/2023 IEC publishes new standard IEC 61558-2-7:2023 – Requirements and
Tests for Transformers and Power Supply Units for Toys
On June 23, 2023, the International Electrotechnical Commission (IEC) released IEC 61558-2-7:2023. This standard deals with the requirements and tests for transformers and power supply units for toys.Safety Global, CB Scheme 6/19/2023 IECEE adds new test report forms (TRFs) on Week 25
On June 19, 2023, TRFs were published and added to the IECEE website.Safety, Performance Israel 5/31/2023 Israel SII prepares draft standard SI 1516 Part 1 – Power Cables with Extruded Insulation and their Accessories
On May 31, 2023, the Standards Institution of Israel (SII) prepared draft standard SI 1516 Part 1 for power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV): cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV).
Comments and feedback were accepted until June 21, 2023.Safety, Performance EU 6/9/2023 European Union CENELEC publishes new standard EN IEC 63027:2023 – Photovoltaic Power Systems
On June 9, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 63027:2023 for photovoltaic power systems DC arc detection and interruption.Safety, Performance Israel 6/11/2023 Israel MEI notifies changes in standard SI 60974 Part 1 – Arc Welding Equipment
On June 11, 2023, the Ministry of Economy and Industry (MEI) notified changes in standard SI 60974 Part 1 for arc welding equipment – welding power sources.
Comments and feedback are accepted until July 11, 2023.Safety, Performance Global 5/12/2023 ISO publishes new standard for the Performance and Safe Use of Lithium-ion Batteries in Wheelchairs (ISO 7176-31:2023)
On May 12, 2023, the International Organization for Standardization (ISO) published the first edition of the standard ISO 7176-31:2023 Wheelchairs — Part 31: Lithium-ion Battery Systems and Chargers for Powered Wheelchairs — Requirements and Test Methods.Safety, RoHS, Performance Israel 6/22/2023 Israel MEI publishes proposal for fundamental reform of import of products to which official standard applies
On June 22, 2023, the Ministry of Economy and Industry (MEI) published a proposal for fundamental reform of import products to which an official standard applies.
Comments and suggestions for:
- Members of the Chamber of Commerce were accepted until June 29, 2023; and
- Independent party was accepted until July 6, 2023.Sanitation Japan 6/22/2023 Japan MHLW publishes draft amendment to synthetic resin positive list for food contact application
On June 22, 2023, the Ministry of Health, Labour and Welfare (MHLW) published through World Trade Organization (WTO) a draft amendment to the specifications and standards for foods, food additives, etc.
Comments are accepted until Aug. 21, 2023.Sustainability Taiwan 5/26/2023 Taiwan EPA plans to introduce guidelines for electronic product repairability index
On May 26, 2023, the Environmental Protection Administration (EPA) released a press release on future plan to introduce Electronic Product Repairability Index based on existing EU requirements.Sustainability South Korea 3/28/2023 South Korea ME announces partial revision of resource saving and recycling promotion act amending provisions on plastic packaging
On March 28, 2023, the Ministry of Environment announced partial revision of Act on the Conservation and Promotion of Recycling of Resources adding color and weight criteria items to the criteria for the structure of packaging materials and the evaluation criteria for recyclability standards.Sustainability EU 6/14/2023 European Union EP adopts new rules for the design, production and waste management of all types of batteries
On June 14, 2023, the European Parliament approved new rules for the design, production and waste management of all types of batteries sold in the EU.
Following the final vote in plenary, the Council will now have to formally
endorse the text before its publication in the EU Official Journal.Sustainability South Korea 6/5/2023 South Korea proposes special act on the reduction and management of microplastics
On June 5, 2023, 13 members of South Korea Environment and Labor Committee of the National Assembly proposed Special Act on the Reduction and Management of Microplastics, including prohibition on products that, during their use, can cause microplastics release, such as electrical and electronic products.Sustainability Belgium 6/2/2023 Belgium approves draft laws on reparability and durability index
On June 2, 2023, the Council of Ministers approved a draft law and two draft royal decrees establishing a reparability and durability index for goods.
The objective is for the reparability index and the durability index to be
exactly the same as the indices used in France, which has already implemented a reparability index as part of the anti-waste and circular economy law since January 2021
The drafts have now been forwarded to the European Commission.Sustainability Philippines 1/24/2023 Philippines DENR issues Implementing Rules and Regulations (IRR) for Extended Producer Responsibility Act of 2022
On Jan. 24, 2023, the Department of Environment and Natural Resources (DENR) issued the implementing rules and regulations (IRR) of Republic Act 11898, also known as the Extended Producer Responsibility Act (EPRA) of 2022, which is the environmental law that mandates companies to develop recovery programs for their plastic packaging waste.Wireless Argentina 5/8/2023 Argentina Enacom amends RAMATEL marking requirements
On May 8, 2023, the Ente Nacional de Comunicaciones (ENACOM) published Resolution 586/2023 amending the minimum mandatory guidelines for the marking of equipment registered in RAMATEL.Wireless Ethiopia 5/26/2023 Ethiopia ECA publishes draft directive on type approval fees
On May 26, 2023, the Ethiopian Communications Authority (ECA) opened a public consultation on the directive to provide for the determination of communication services and radio frequency licenses, telecommunications number assignment, and radio communications and telecommunications equipment type approval services.
Comments are accepted until June 15, 2023.Wireless China 5/26/2023 China MIIT publishes draft for comments regarding wireless LAN equipment supporting IPv6 protocol for testing capability in SRRC
On May 26, 2023, the Ministry of Industry and Information Technology (MIIT) opened public consultation Notice of the Ministry of Industry and Information Technology on Matters Concerning Testing Capability of Wireless Local Area Network Equipment Supporting IPv6 Protocol in Type Approval (SRRC).
Comments were submitted until June 26, 2023.Wireless EU 5/24/2023 European Union EC postpones implementation of ER for cybersecurity under RED to 2025
On May 24, 2023, the European Commission (EC) opened a public consultation amending the Delegated Regulation (EU) 2022/30 as regards the date of application of the essential requirements for radio equipment and correcting that Regulation.
Comments were accepted until June 21, 2023.Wireless Thailand 5/22/2023 Thailand NBTC opens public consultation on technical standards for GSM-R base station and user equipment
On May 22, 2023, the Office of the National Broadcasting and Telecommunications Commission (NBTC) opened a public consultation on the following technical standards:
- Draft NBTC Notification on the Technical Standards of Telecommunication Equipment for Radiocommunication Equipment (User Equipment) Used in Land Mobile Services, Cellular Phone System Using GSM-R Technology
- Draft NBTC Notification on the Technical Standards of Telecommunication Equipment for Radiocommunication Equipment (Base Stations and Repeaters) Used in Land Mobile Services, Cellular Phone System Using GSM-R Technology
Comments are accepted until July 20, 2023.Wireless United Arab Emirates 5/22/2023 UAE TDRA opens public consultation on the UWB and SRD regulations
On May 22, 2023, the Telecommunications and Digital Government Regulatory Authority (TDRA) of United Arab Emirates opened a public consultation on the revision of Regulations Ultra-Wide Band and Short-Range Devices.
Comments were accepted until July 7, 2023.Wireless China 5/22/2023 China MIIT publishes interim regulations on radio management of wireless charging (power transmission) equipment
On May 22, 2023, the Ministry of Industry and Information Technology (MIIT) published MIIT-Radio Committee Notice No. 62 Interim Regulations on Radio Management of Wireless Charging (Power Transmission) Equipment to regulate the usage of wireless charging equipment, which will be put into force from Sept. 1, 2024.Wireless China 6/1/2023 China MIIT releases public consultation for adding new technical
requirements and test methods for WLAN equipment adopting IEEE 802.11be for SRRC
On June 1, 2023, the Ministry of Industry and Information Technology (MIIT) opened public consultation Notice of the State Radio Office on New Technical Requirements and Test Methods for Wireless LAN Equipment Adopting Technical Standard IEEE 802.11be for Type Approval (SRRC).
Comments were submitted until July 1, 2023.Wireless Costa Rica 6/2/2023 Costa Rica SUTEL publishes new National Frequency Allocation Plan (PNAF)
On June 2, 2023, the Superintendence of Telecommunications (SUTEL) published the new National Frequency Allocation Plan (PNAF), which was published in the La Gaceta newspaper, through Executive Decree No. 44010-MICITT.Wireless Indonesia 3/21/2023 Indonesia MoC Publishes new regulation regarding class permits of the use of radio frequency spectrum
On March 21, 2023, the Ministry of Communication and Informatics (MoC) published the new Regulation of the Minister of Communication and Informatics (PERMENKOMINFO) Number 2 of 2023 concerning Use of Radio Frequency Spectrum Based on Class Permits.Wireless Vietnam 5/31/2023 Vietnam MIC publishes amendment of regulation regarding list of products requiring type approval and/or DoC
On May 31, 2023, the Vietnam Ministry of Information and Communications (MIC) published Regulations on the List of Potentially Unsafe Products and Goods under the Management Responsibility of the Ministry of Information and Communications (MIC Circular No. 04/2023/TT-BTTTT). The document covers the list of products requiring type approval and/or Declaration of Conformity (DoC).Wireless Laos 5/29/2023 Laos MTC publishes agreement on the certification of telecommunication and ICT Equipment
On May 29, 2023, the Ministry of Technology and Communication (MTC) of Laos published Agreement on the Technical Certification of Telecommunications and ICT Equipment (No. 1495/MTC), which sets out the marking requirements such as marking appearance, equipment approval details in the QR code, required placement and procedure on how to obtain the mark for type 1 (need Certification and DoC) and type 2 (DoC only) equipment.Wireless Bahrain 6/12/2023 Bahrain iGA announces launch of the new feature on their national portal
On June 12, 2023, the Information & eGovernment Authority (iGA) and Minister of Interior, Chairman of the Ministerial Committee for Information and Communication Technology (MCICT) announced new features added to the National portal Bahrain.bh that will reinforce user experience of the portal.Wireless India 6/14/2023 India TEC exempts certain parameters for repeater for cellular network under MTCTE scheme
On June 14, 2023, the Telecommunication Engineering Centre (TEC) published Notification No. 5-5/2021-TC/TEC regarding the exemption pertaining to essential requirements (ERs) of Repeater for Cellular Network under Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.Wireless Guinea 6/12/2023 Guinea ARPT publishes type approval regulation
On June 12, 2023, the Post and Telecommunications Regulatory Authority (ARPT) released Decision No. 003 Approval Procedures in the Telecommunication/ICT Sector in the Republic of Guinea.Wireless Kuwait 6/11/2023 Kuwait CITRA publishes resolution to stop importing 2G and 3G peripheral communication devices
On June 11, 2023, the Communication and Information Technology Regulatory Authority (CITRA) published Resolution 297/2023 regarding the suspension of granting permissions to import and introduce telecommunications peripheral devices that operate only on the technology of the second generation or the third generation of communications or both of them.Wireless Australia 6/20/2023 Australia ACMA publishes draft allocation for AWLs in 3.8GHz
On June 20, 2023, the Australian Communications and Media Authority (ACMA) opened a public consultation regarding the allocation of area-wide apparatus licenses (AWLs) in the 3.8 GHz band.
Comments can be submitted until Aug. 1, 2023.Wireless, Cyber Security Brazil 6/16/2023 Brazil Anatel reschedules cybersecurity requirements for CPE effective date to July 1, 2023
On June 16, 2023, the National Telecommunications Agency (Anatel) published Act No. 7344, which amended article 2 of Act No. 2436 Approve the Minimum Mandatory Cybersecurity Requirements for Assessing the Conformity of CPE (Customer Premises Equipment) Equipment.Wireless, Safety, EMC Iraq 4/1/2023 Iraq CMC amends type approval regulation
On April 1, 2023, the Communications and Media Commission (CMC) amended the Regulation for the system of approving type approval certificates for wired and wireless telecommunication equipment. Official source- June 2023 updates
Regulation Country Published Date Summary Cosmetics Europe 7/28/2023 EC Issues Commission Regulation (EU) 2023/1545 of 26 July 2023 amending Regulation (EC) No 1223/2009 of the European Parliament and of the Council as regards labelling of fragrance allergens in cosmetic products
The European Commission (EC) has issued Commission Regulation (EU) 2023/1545 amending Cosmetic Regulation regarding labelling of fragrance allergens in cosmetic products.
This Regulation adds many new allergenic fragrances that shall be labelled on the ingredients list of cosmetic products. It also updates existing entries on fragrance allergens (related to the identification of substances).
Application dates: most of the new requirements apply from 31 July 2026 for placing on the market of cosmetic products and from 31 July 2028 for making available on the market.Chemicals Europe 7/13/2023 EC Publishes Commission Regulation (EU) 2023/1464 to Amend Annex XVII to REACH Regulation as regards Formaldehyde and Formaldehyde Releasers
The European Commission (EC) has published Commission Regulation (EU) 2023/1464 of 14 July 2023 amending Annex XVII to Regulation (EC) No 1907/2006 of the European Parliament and of the Council as regards formaldehyde and formaldehyde releasers.
The Regulation specifies that formaldehyde and formaldehyde releasers shall not be placed on the market in articles, after August 6, 2026, if, under the test conditions specified in Appendix 14, the concentration of formaldehyde released from those articles exceeds:
(a) 0,062 mg/m3 for furniture and wood-based articles;
(b) 0,080 mg/m3 for articles other than furniture and wood-based articles.
Official sourceChemicals Taiwan 2/15/2023 Taiwan Issues Presidential Order Banning Electronic Cigarettes and their Parts
On Feb. 15, 2023, the government of Taiwan issued a Presidential Order amending the Tobacco Hazards Prevention Act, which bans electronic cigarettes and other vaping products, and was effective on March 22, 2023.
Official sourceChemicals Taiwan 3/22/2023 Taiwan: MOEA Adds CCC Codes of Electronic Cigarettes (E-Cigarettes) in Restricted Imported Products
On March 22, 2023, Taiwan’s Ministry of Economic Affairs (MOEA) issued an amendment to the List of Commodities Subject to Import Restriction, which includes electronic cigarettes. This aims to prevent smoking hazards and maintain national health, and went into effect on the same day.
Official source, Official sourceChemicals EU 4/28/2023 European Union: EC Publishes Draft Updated List of Prohibited Mercury-Added Products
On April 28, 2023, the European Commission (EC) released the draft Commission Delegated Regulation (EU) amending Regulation (EU) 2017/852 of the European Parliament and of the Council regarding mercury-added products subject to manufacturing, import and export prohibitions. This draft regulation updates the list of mercury-added products (MAPs) not allowed in the EU by including some fluorescent products and measuring devices, among others. This initiative supports the EU strategy of phasing out MAPs, where viable alternatives exist, as completely as possible.
Comments were accepted until May 26, 2023.
Official sourceChemicals USA 4/21/2023 USA: California OEHHA Lists Chemicals Known to the State of California to Cause Cancer: 1,1,1-Trichloroethane and Leucomalachite Green
On April 21, 2023, California’s Office of Environmental Health Hazard Assessment (OEHHA) added two new substances to the list of chemicals known to the State of California to cause cancer for purposes of Proposition 65.
Official source, Official source, Official sourceChemicals EU 4/28/2023 European Union: EC Publishes Amendment on Regulation Related to Perfluorooctanoic Acid (PFOA), its Salts and PFOA-Related Compounds
On April 28, 2023, the European Commission (EC) published Commission Delegated Regulation (EU) 2023/866 of 24 February 2023 amending Regulation (EU) 2019/1021 of the European Parliament and of the Council regarding perfluorooctanoic acid (PFOA), its salts and PFOA-related compounds.
Official source, Official sourceF Gas, Chemicals USA 5/24/2023 USA: EPA Publishes Proposed Rules on Listing of Substitutes Under the Significant New Alternatives Policy Program in Commercial and Industrial Refrigeration
On May 24, 2023, the U.S. Environmental Protection Agency (EPA) published proposed rules on listing substitutes under the significant new alternatives policy program in commercial and industrial refrigeration.
Comments must be received on or before July 10, 2023.
Official sourceCyber Security Israel 1/31/2023 Israel: SII Publishes New Voluntary Standard SI 27001:2023, Information Security Management Systems Requirements
On Jan. 31, 2023, the Standards Institution of Israel (SII) published voluntary standard SI 27001:2023 for information security, SVR security and privacy protection — Information Security Management Systems: Requirements.
Official source, Official source, Official sourceCyber Security Israel 1/31/2023 Israel: SII Publishes New Voluntary Standard SI 27002:2023, Information Security Controls, Cybersecurity and Privacy Protection
On Jan. 31, 2023, the Standards Institution of Israel (SII) published voluntary standard SI 27002:2023, Information Security, Cybersecurity and Privacy Protection – Information Security Controls.
Official source, Official source, Official sourceElectrical and Electronic Waste, RoHS, Chemicals India 4/1/2023 India: CPCB Publishes SOP for Grant of Registration to Producers Under E-Waste (Management) Rules 2022
On April 1, 2023, India’s Central Pollution Control Board (CPCB) published Standard Operating Procedure (SOP) for Grant of Registration to Producers Under E-Waste (Management) Rules 2022.
Official sourceElectrical and Electronic Waste, Sustainability Kenya 4/26/2023 Kenya: NEMA Publishes Draft Sustainable Waste Management Act (Extended Producer Responsibility) Regulations 2022
On April 26, 2023, Kenya’s National Environment Management Authority (NEMA) published draft Sustainable Waste Management Act (No. 31 of 2022) (Extended Producer Responsibility) Regulations 2022.
The final date for comments was June 25, 2023.
Official sourceEMC Taiwan 4/17/2023 Taiwan: BSMI Publishes Updated List of Recognized EMC Testing Laboratories in Foreign Countries (April 2023 Update)
On April 17, 2023, Taiwan’s Bureau of Standards, Metrology and Inspection (BSMI) published its List of EMC Testing Laboratories Recognized by the BSMI in Foreign Countries.
Official sourceEMC Australia, New Zealand 5/5/2023 Australia and New Zealand Publish AS/NZS IEC 61000.3.3:2023 — EMC Limitation of Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems
On May 5, 2023, Standards Australia and New Zealand published a new standard, AS/NZS IEC 61000.3.3:2023. This standard deals with electromagnetic compatibility, particularly for limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤ 16 A per phase and not subject to conditional connection.
Official source, Official sourceEMC, Energy Efficiency, RoHS, Safety, Chemicals Taiwan 5/9/2023 Taiwan: BSMI Publishes New Certification Information Booklet Version 1.82
On May 9, 2023, Taiwan’s Bureau of Standards, Metrology and Inspection (BSMI) published the latest Taiwan Commodity Inspection Schemes for Electrical and Electronic Products (Conformity Assessment) Information Booklet Version 1.82, which guides interested parties on updating the recognition status and scope of testing laboratories related to BSMI certification.
Official sourceEMC, Energy Efficiency, Safety Global 5/22/2023 IEC Publishes 59th Amendment of IEC 60061-2 and IEC 60061-3
— Lamp Caps and Holders Together with Gauges for the Control of
Interchangeability and Safety
On May 22, 2023, the International Electrotechnical Commission (IEC) released IEC 60061-2:1969/AMD59:2023 and IEC 60061-3:1969/AMD59:2023. These standards are the 59th amendment and deal with lamp caps and holders together with gauges for the control of interchangeability and safety.
Official source, Official sourceEMC, Energy Efficiency, Safety, Performance Global, CB Scheme 5/1/2023 IECEE Includes New Standards in the System for March and April 2023
In March and April 2023, new standards were included in the IECEE system.MED IEC 60601-2-43:2022 March 21, 2023 BATT IEC 62281:2019/AMD2:2023 April 17, 2023 CONT IEC 60730-2-5:2013/AMD2:2021 April 27, 2023 EMC IEC 62920:2017 April 20, 2023 EMC IEC 62920:2017/AMD1:2021 April 20, 2023 INST IEC 61535:2023 April 17,2023 MED IEC 60601-2-2:2017/AMD1:2023 April 17, 2023 POW IEC 62271-215:2021 April 19, 2023 POW IEC 62271-201:2014 April 19, 2023 POW IEC 62271-202:2022 April 19, 2023 POW IEC TR 62271-208:2009 April 19, 2023 POW IEC 62271-212:2022 April 19, 2023 POW IEC 62271-213:2021 April 19, 2023 POW IEC 62271-214:2019 April 19, 2023 POW IEC TS 60076-20:2017 April 19, 2023 EMC, Performance Taiwan 4/25/2023 Taiwan: BSMI Announces New and Revised Electromagnetic Compatibility (EMC) Immunity Standards, Including New Standards for Smoke and Heat Control Systems (SHCS)
On April 25, 2023, Taiwan’s Bureau of Standards, Metrology and Inspection (BSMI) announced in the National Standards of the Republic of China (CNS) service system the release of newly formulated and revised national standards for electromagnetic compatibility (EMC) immunity requirements for multimedia equipment (MME) and electrical and electronic equipment, including new standards for smoke and heat control systems (SHCS).
Official sourceEMC, Performance, Safety, Wireless India 5/3/2023
India: TEC Exempts Certain Parameters for Precision Timing Protocol Grand Master Equipment and VHF UHF Radio System Equipment Under MTCTE Scheme
On May 3, 2023, India‘s Telecommunication Engineering Centre (TEC) published Notification No. 5-5/2021-TC/TEC regarding the exemption pertaining to certain parameters of precision timing protocol grand master equipment and VHF UHF radio system equipment under the Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.
Official source, Official sourceEMC, Performance, Safety, Wireless India 5/22/2023 India: TEC Exempts Certain Parameters for ADSLx and VDSLx Interfaces Under MTCTE Scheme
On May 22, 2023, India’s Telecommunication Engineering Centre (TEC), published Notification No. 5-5/2021-TC/TEC regarding the exemption pertaining to essential requirements (ERs) of ADSLx and VDSLx interfaces under the Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.
Official source, Official sourceEMC, Performance, Safety, Wireless India 5/22/2023 India: TEC Revises Labelling Guidelines for MTCTE Scheme
On May 22, 2023, India‘s Telecommunication Engineering Centre (TEC), published Notification No. 6-6/2021-TC/TEC, Part 1, regarding the revision of the labelling guidelines in the Mandatory Testing and Certification of Telecommunication Equipment (MTCTE) scheme.
Official source, Official sourceEMC, Safety Oman, GCC 4/28/2023 Oman: DGSM Accredits UL International Demko A/S as Notified Body for Low-Voltage Electrical Equipment and Appliances
Oman’s Directorate General of Standards and Metrology (DGSM) accredited UL International Demko A/S as a notified body for Oman certification. The scope covers technical regulation for low-voltage electrical equipment and appliances (LV-TR-OM) and the three product categories impacted: washing machines, dishwashers and vacuum cleaners.
Official source, Official sourceEMC, Safety Global, CB Scheme 5/5/2023 IECEE Adds New Test Report Forms (TRFs) in Week 18
On May 5, 2023, the following TRFs were published and added to the website.TRF No. TRF originator IEC61000_6_8A EMITECH SAS IEC61000_6_8 and 1A EMITECH SAS SA_ND_IEC60598_2_4I Saudi Standards, Metrology and Quality Organization (SASO) EU_GD_IEC60335_2_102F_II Nemko Group ASCA_ND_ IEC61010_2_081C CSA Group CA_ND_IEC61010_2_101C CSA Group EU_GD_IEC61010_2_011C_II CSA Group EU_GD_IEC62841_4_5A DEKRA Certification B.V. EMC, Safety Uzbekistan 5/17/2023 Uzbekistan: MIIT Issues Amendments to Product Certification Rules
On May 17, 2023, the Ministry of Investment, Industry and Trade (MIIT) of the Republic of Uzbekistan issued an order making changes and additions to the rules of product certification, which includes the verification of compliance with the rights to intellectual property objects (IPO), effective on the same day.
Official sourceEMC, Safety China 5/4/2023 China: CQC Issues Revised Voluntary Safety and EMC Certification Rules for Commercial Dispensing Appliances and Vending Machines On May 4, 2023, the China Quality Certification Centre (CQC) issued a notice on the second revision of CQC12-439341-2009, Safety and Electromagnetic Compatibility Certification Rules for Commercial Vending Machines, effective on the same day.
EMC, Safety, Cyber Security, Performance, Noise, Sanitation China 3/17/2023 China: SAC Publishes 373 Recommended National Standards and 6 National Standard Revisions, Including a Part of Electrical and Electronic Equipment On March 17, 2023, the Standardization Administration of China (SAC) of the State Administration for Market Regulation (SAMR) of the People's Republic of China published Announcement No. 1 of 2023 to approve 373 recommended national standards and six national standards for a wide range of products and materials, including various household products, electrical components, IT products, tools and industrial products, etc., but not limited to electronic products.
These standards address electromagnetic compatibility (EMC), performance, noise, environment and cybersecurity requirements, etc., with different implementation dates.
EMC, Safety, Performance EU 5/19/2023 European Union: CENELEC Publishes New Standard, EN IEC 60947-6-1:2023 — Transfer Switching Equipment
On May 19, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60947-6-1:2023, for low-voltage switchgear and controlgear in multiple-function transfer switching equipment.
The date of withdrawal of the superseded version is May 19, 2026.
Official source, Official sourceEMC, Wireless South Korea 4/18/2023 South Korea: RRA Publishes Revised Conformity Assessment of Broadcasting and Communication Equipment
On April 18, 2023, the South Korean National Radio Research Agency (RRA) published under Notice No. 2023-6 a partial revision of its Notice on Conformity Assessment of Broadcasting and Communication Equipment, etc.
Official source, Official sourceEMC, Wireless South Korea 5/23/2023 South Korea: RRA Opens Public Consultation on Partial Revision of Equipment that Does Not Require Radio Wave Application Permission Other than Communication Equipment
On May 23, 2023, the South Korean Ministry of Science and ICT (MSIT) opened a public consultation on a partial revision of Facilities and Devices that Do Not Require Permission Among Radio Wave Application Facilities Other than Communication Facilities under Ministry of Science and ICT Announcement No. 2023-0564.
Comments are accepted until June 14, 2023.
Official sourceEnergy Efficiency USA 5/1/2023 USA: DOE Publishes Final Rule for Test Procedure for Fans and Blowers
On May 1, 2023, the U.S. Department of Energy (DOE) issued a final rule regarding its test procedure of fans and blowers.
Official sourceEnergy Efficiency Taiwan 4/10/2023 Taiwan: MOEA Issues Draft of New Energy Efficiency Requirements of Three-Phase AC Motor Driven Fans
On April 10, 2023, Taiwan’s Ministry of Economic Affairs issued draft requirements on its minimum energy performance standard, labelling and inspection of fans. It was open for public consultation until June 9, 2023.
Official source, Official sourceEnergy Efficiency Taiwan 3/23/2023 Taiwan: BOE Abolishes Criteria and Labelling Method of Energy Saving Label for DVD Recorders or Players
On March 23, 2023, Taiwan’s Bureau of Energy (BOE) of the Ministry of Economic Affairs (MOEA) issued an order for the abolition of Energy Conservation Labeling Program requirements for DVD recorders and Players. It will be effective on Oct. 1, 2023.
Official sourceEnergy Efficiency USA 5/4/2023 USA: DOE Publishes Final Rule for Test Procedure for Refrigerated Bottled or Canned Beverage Vending Machines
On May 4, 2023, the U.S. Department of Energy (DOE) issued a final rule regarding its test procedure for refrigerated bottled or canned beverage vending machines.
Official sourceEnergy Efficiency USA 5/4/2023 USA: DOE Publishes Final Rule for Test Procedure for Walk-In Coolers and Walk-In Freezers
On May 4, 2023, the U.S. Department of Energy (DOE) issued a final rule regarding its test procedure for walk-in coolers and walk-in freezers.
Official sourceEnergy Efficiency India 5/4/2023 India: BEE Extends Voluntary Regime of Star Labelling for Washing Machines
On May 4, 2023, India’s Bureau of Energy Efficiency (BEE) published important instructions to all manufacturers/permittees registered under the S&L program for washing machines regarding an extension for the voluntary regime of star labelling.
Official sourceEnergy Efficiency Ghana 1/27/2023 Ghana: EC Publishes New Regulation for Energy Efficiency and Labelling of Set-Top Boxes
On Jan. 27, 2023, Ghana’s Energy Commission (EC) published a new regulation for energy efficiency standards and labelling of set-top boxes.
This regulation entered into force on Nov. 2, 2022.
Official source, Official sourceEnergy Efficiency Ghana 1/27/2023 Ghana: EC Publishes New Regulation for Energy Efficiency and Labelling of Microwave Ovens
On Jan. 27, 2023, Ghana’s Energy Commission (EC) published a new regulation for energy efficiency standards and labelling of microwave ovens.
This regulation entered into force on Nov. 2, 2022.
Official source, Official sourceEnergy Efficiency USA 5/11/2023 USA: DOE Publishes Proposed Rules for Energy Conservation Standards of Automatic Commercial Ice Makers
On May 11, 2023, the U.S. Department of Energy (DOE) published a proposed rule regarding energy conservation standards for automatic commercial ice makers.
Official sourceEnergy Efficiency Tunisia 4/28/2023 Tunisia Issues New Energy Efficiency Labeling Requirements for Washing Machines
On April 28, 2023, the Ministry of Industry, Mines and Energy and the Ministry of Trade and Export Development published a joint order dated April 24, 2023, in the Official Journal of the Republic of Tunisia (JORT) No. 043 of April 28, 2023. The order amends the Order of the Ministry of Industry and Small and Medium-Sized Enterprises and of the Ministry of Trade of July 24, 2019, relating to the energy labeling of automatic washing machines.
Official sourceEnergy Efficiency USA 5/12/2023 USA: DOE Publishes Proposed Rules for Test Procedure of Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps
On May 12, 2023, the U.S. Department of Energy (DOE) published a proposed rule regarding the energy test procedure for packaged terminal air conditioners and packaged terminal heat pumps.
In this notice of proposed rulemaking, the DOE proposes the following:-
Amend the test procedures for packaged terminal air conditioners (PTACs) and packaged terminal heat pumps (PTHPs) to establish seasonal energy efficiency metrics for heating and cooling
-
Update the test procedure currently used to measure dehumidification energy use of make-up air PTACs and PTHPs
The DOE will accept comments, data and information regarding this proposal no later than July 11, 2023.
Official sourceEnergy Efficiency Tunisia 4/28/2023 Tunisia Issues New Energy Efficiency Labeling Requirements for Refrigerators
On April 28, 2023, the Ministry of Industry, Mines and Energy and the Ministry of Trade and Export Development published a joint order dated April 24, 2023, in the Official Journal of the Republic of Tunisia (JORT) No. 043 of April 28, 2023. The order amends the Order of the Ministry of Industry, Energy and Trade of Sept. 10, 2004, relating to the labeling of refrigerators, freezers and combined appliances.
Official sourceEnergy Efficiency USA 5/15/2023 USA: DOE Publishes Final Rule for Test Procedure of Portable Air Conditioners
On May 15, 2023, the U.S. Department of Energy (DOE) published a final rule regarding its test procedure for portable air conditioners.
This final rule includes the following changes:- Amends the current test procedure for portable air conditioners
- Establishes a new test procedure for portable air conditioners that offers more accurate measurements of cooling capability and energy usage
Energy Efficiency Australia, New Zealand 5/15/2023 Australia and New Zealand Introduce Minimum Energy Performance Standards for Commercial Ice Makers
On May 15, 2023, the GEMS regulator (Australia) and EECA (New Zealand) started the consultation period for introducing minimum energy performance standards (MEPS) for commercial ice makers.
The consultation period will end on June 12, 2023.
Official source, Official sourceEnergy Efficiency Canada 5/8/2023 Canada: SCC Reaffirmation of Standards for Energy Performance of Displays
On May 8, 2023, the Standards Council of Canada (SCC) initiated a review of the standard CAN/CSA-C383-13, Energy Performance of Displays.
Comments were accepted until June 7, 2023.
Official sourceEnergy Efficiency Mexico 4/26/2023 Mexico: CONUEE Approves UL Mexico Laboratory for Testing LED Lamps and Luminaires for Outdoor Use
On April 26, 2023, Mexico’s National Commission for the Efficient Use of Energy (CONUEE) approved the UL Mexico laboratory in Queretaro as a laboratory for testing LED lamps and luminaires for outdoor use under the applicable Mexican standards.
Please contact your local UL Solutions office for more information.Energy Efficiency Ukraine 4/4/2023 Ukraine Publishes Draft Technical Regulations for Energy Labeling of Household Dishwashers
On April 4, 2023, Ukraine’s Ministry for Communities, Territories and Infrastructure Development published its Draft Order on Approval of the Technical Regulations for Energy Labeling of Household Dishwashers, developed by the State Agency for Energy Efficiency and Energy Saving of Ukraine on the basis of the updated European requirements.
Please contact your local UL Solutions office for more information.Energy Efficiency Saudi Arabia 5/22/2023 Saudi Arabia: SASO Directs Stakeholders to Comply with SASO 3029:2023 for Electric Dishwasher Products
On May 22, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) directed stakeholders to comply with SASO 3029:2023 for IECEE applications and recognition certificates for energy and water performance and label requirements for electric dishwasher products.
Please contact your local UL Solutions office for more information.Energy Efficiency South Korea 5/11/2023 South Korea: MOTIE Opens Public Consultation on Partial Revision of Efficiency Management Equipment Operation Regulations
On May 11, 2023, the South Korean Ministry of Trade, Industry and Energy opened a public consultation on the partial revision of Efficiency Management Equipment Operation Regulations (MOTIE Notice No. 2023-433).
Comments are accepted until July 10, 2023.
Official sourceEnergy Efficiency USA 5/19/2023 USA: DOE Publishes Proposed Rules for the Energy Conservation Standards for Dishwashers
On May 19, 2023, the U.S. Department of Energy (DOE) published a proposed rule regarding the energy conservation standards of dishwashers.
The DOE will accept comments, data and information regarding this NOPR until July 18, 2023.
Official sourceEnergy Efficiency Philippines 4/27/2023 Philippines: DOE Announces Clarification of Energy Label Specification
On April 27, 2023, the Philippines’ Department of Energy (DOE) announced a clarification of its energy label specification.
Official sourceEnergy Efficiency USA 5/24/2023 USA: DOE Publishes Final Rule for Test Procedure of Faucets and Showerheads
On May 24, 2023, the U.S. Department of Energy (DOE) published a final rule regarding its test procedure for portable air conditioners.
In this final rule, the following are the changes:- Updates faucet and showerhead testing procedures to reflect the most recent version of the referenced industry standard
- Adds definitions for low-pressure water dispensers and pot fillers and excludes them from the faucet definition
- Provides additional information for conducting flow rate measurements
Energy Efficiency USA 5/25/2023 USA: DOE Publishes Proposed Rules for Energy Conservation Standard for Refrigerated Bottled or Canned Beverage Vending Machines
On May 25, 2023, the U.S. Department of Energy (DOE) published a proposed rule regarding the energy conservation standards of refrigerated bottled or canned beverage vending machines.
The DOE will accept comments, data and information regarding this NOPR no later than July 24, 2023.
Official sourceEnergy Efficiency Australia, New Zealand 5/23/2023 Australia and New Zealand Introduce Energy Efficiency Requirements
for Digital Displays
On May 23, 2023, the GEMS regulator (Australia) and EECA (New Zealand) started the consultation period on possible changes to the energy efficiency requirements applying to televisions and computer monitors sold, supplied or imported into Australia or New Zealand.
The consultation period will end on July 4, 2023.
Official source, Official sourceEnergy Efficiency, Performance Ghana 1/27/2023
Ghana: EC Publishes New Regulation for Energy Efficiency and Labelling of Ventilating Fans
On January 27, 2023, Ghana’s Energy Commission (EC) published a new regulation for energy efficiency standards and labelling of ventilating fans.
This regulation entered into force on Nov. 2, 2022.
Official source, Official sourceEnergy Efficiency, Performance Oman 5/14/2023 Oman: DGSM Publishes Energy Efficiency Standards for Electric Washing Machines, Water Heaters, Refrigerators and Freezers
Oman’s Directorate General for Standards and Metrology (DGSM) published energy efficiency and performance standards for laundry-type washing machines, electric water heaters, refrigerators and freezers.
Official source, Official source, Official source, Official source, Official sourceEnergy Efficiency, Performance Canada 5/8/2023 Canada: SCC Reaffirms the Standard for Energy performance of Household Clothes Washers
On May 8, 2023, the Standards Council of Canada (SCC) initiated a review of CAN/CSA-C360-13 (R2018), Energy Performance, Water Consumption and Capacity of Household Clothes Washers.
Comments were accepted until June 7, 2023.
Official sourceEnergy Efficiency, Performance Saudi Arabia 5/19/2023 Saudi Arabia: SASO Publishes Technical Regulation for Standby and Sleep Mode Electrical and Electronic Equipment
On May 19, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) published a technical regulation for standby and sleep mode electric power consumption of electrical and electronic equipment.
Please contact your local UL Solutions office for more information.Energy Efficiency, Performance EU 5/24/2023 European Union: CEN Publishes New Standard, EN ISO 6369:2023 — Ice Makers for Commercial Use
On May 24, 2023, the European Committee for Standardization (CEN) published a new standard, EN ISO 6369:2023, Ice Makers for Commercial Use – Classification, Requirements and Test Conditions.
Official source, Official sourceEnergy Efficiency, Performance South Africa 5/24/2023 South Africa Publishes Compulsory Specifications for Energy Efficiency and Functional Performance Requirements of General Service Lamps (GSLs)
On May 24, 2023, South Africa’s Department of Trade, Industry and Competition published compulsory specifications for energy efficiency and functional performance requirements of general service lamps (GSLs).
Official sourceEnergy Efficiency, Performance, Sustainability EU 5/2/2023 European Union: EC Reviews Energy Requirements for Cooking Appliances
On May 2, 2023, the European Commission (EC) organized initiatives to review eco-design and energy labelling requirements for cooking appliances. This aims to update minimum energy efficiency and reparability for products, including ovens, hobs and range hoods.
Comments were accepted until May 30, 2023.
Official source, Official sourceEnergy Efficiency, Safety South Africa 5/24/2023 South Africa Publishes Compulsory Specifications for Safety Requirements of General Service Lamps (GSLs)
On May 24, 2023, South Africa’s Department of Trade, Industry and Competition published compulsory specifications for safety requirements for general service lamps (GSLs).
Official sourceEnergy Efficiency, Safety, Performance Taiwan 3/6/2023 Taiwan: BSMI Issues Revised Output Performance Requirements for Photovoltaic Modules for Voluntary Product Certification (VPC)
On March 6, 2023, Taiwan’s Bureau of Standards, Metrology and Inspection (BSMI) of the Ministry of Economic Affairs (MOEA) issued a revision of the PV Taiwan Plus Technical Specification, which has been effective since March 3, 2023. The photovoltaic (PV) modules in the declaration of conformity-to-type for the voluntary product certification (VPC) must conform with those in the type-test report.
Official sourceExplosive Atmospheres Australia, New Zealand 5/1/2023 Australia and New Zealand Publish DR AS/NZS 60079.5:2015 Amendment 1:2023 — Explosive Atmospheres, Equipment Protection by Powder Filling “q”
On April 22, 2023, Standards Australia and New Zealand released draft DR AS/NZS IEC 60079.5:2015 Amd 1:2023. This standard deals with explosive atmospheres — particularly for equipment protection by power filling “q.”
The closing date for comments is June 12, 2023.
Official sourceF Gas, Chemicals USA 4/28/2023 USA: EPA Publishes Final Rule 25 — Listing of Substitutes Under the Significant New Alternatives Policy Program in Refrigeration, Air Conditioning and Fire Suppression
On April 28, 2023, the U.S. Environmental Protection Agency (EPA) published a final rule for Protection of Stratospheric Ozone: Listing of Substitutes under the Significant New Alternatives Policy Program in Refrigeration, Air Conditioning and Fire Suppression.
Official source, Official source, Official sourceNoise EU 4/24/2023 European Union: EC Updates UN Rules on Noise Emissions from Motorcycles
On April 24, 2023, the European Commission (EC) released a draft delegated regulation amending and correcting Delegated Regulation (EU) No. 134/2014 regarding certain references to regulations of the United Nations Economic Commission for Europe (UNECE) and the availability of certain pure gases. This regulation brings EU law into line with recently updated UN rules on noise emissions from motorcycles (amendments to UNECE Regulation 41).
Comments were accepted until May 22, 2023.
Official sourceNoise EU 4/28/2023 European Union: EC Publishes Draft Directive Updating Requirements on Noise Emitted by Equipment for Use Outdoors
On April 28, 2023, the European Commission (EC) released a draft Commission Delegated Regulation (EU) amending Directive 2000/14/EC of the European Parliament and of the Council regarding the methods to measure airborne noise emitted by equipment for use outdoors. This initiative will transform the current directive to align it with the technical progress of the market.
Comments were accepted until June 2, 2023.
Official sourcePerformance EU 4/28/2023 European Union: EC Creates Initiatives for the Use of Heat Pumps to Cut Greenhouse Gases
On April 28, 2023, the European Commission (EC) progressed on the initiatives for the use of efficient heat pumps in buildings, industry and local heat networks. This initiative will support the cutting of greenhouse gases and achieving the Green Deal and REPowerEU targets.
Comments were accepted until May 26, 2023.
Official sourcePerformance EU 5/3/2023 European Union: CEN Publishes Amended Standard EN 549:2019+A1:2023 — Rubber Materials for Gas Appliances and Equipment
On May 3, 2023, the European Committee for Standardization (CEN) published an amended standard, EN 549:2019+A1:2023, Rubber Materials for Seals and Diaphragms for Gas Appliances and Gas Equipment.
The date of withdrawal of the superseded version is Nov. 30, 2023.
Official source, Official sourcePerformance China 4/6/2023 China: CQC Revises Voluntary Performance Certification Rules for Table Lamps for Paper Tasks (CQC16-465316-2023)
On April 6, 2023, the China Quality Certification Centre (CQC) issued a notice on the revised performance certification rules for table lamps for paper tasks (CQC16-465316-2023), which came into effect on May 1, 2023.Performance EU 5/12/2023 European Union: CENELEC Publishes New Standard EN IEC 60794-1-301:2023 — Optical Fiber Cables Bend Test
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60794-1-301:2023, for basic optical cable test procedures of cable elements, including bend Test Method G1.
The date of withdrawal of the superseded version is May 10, 2026.
Official source, Official sourcePerformance EU 5/12/2023 European Union: CENELEC Publishes New Standard EN IEC 60794-1-303:2023 — Optical Fiber Cables Aperture Gauge Test
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60794-1-303:2023, for basic optical cable test procedures of aperture gauges, including Test Method G4 for ribbon dimensions.
The date of withdrawal of the superseded version is May 10, 2026.
Official source, Official sourcePerformance EU 5/12/2023 European Union: CENELEC Publishes New Standard EN IEC 60794-2-22:2023 — Multi-Simplex Breakout Optical Cables
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60794-2-22:2023, for multi-simplex breakout optical cables for use in terminated breakout cable assemblies.
The date of withdrawal of the superseded version is May 5, 2026.
Official source, Official sourcePerformance EU 5/12/2023 European Union: CENELEC Publishes New Standard EN IEC 60794-2-50:2023 — Simplex and Duplex Indoor Cables
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60794-2-50:2023, for family specification for simplex and duplex indoor cables for use in terminated cable assemblies.
The date of withdrawal of the superseded version is May 5, 2026.
Official source, Official sourcePerformance EU 5/26/2023 European Union: CENELEC Publishes Corrigendum Standard EN IEC
62439-2:2022/AC:2023-05 — Industrial Communication Networks Media Redundancy Protocol (MRP)
On May 26, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard, EN IEC 62439-2:2022/AC:2023-05, Industrial Communication Networks – High Availability Automation Networks – Part 2: Media Redundancy Protocol (MRP).
Official source, Official sourcePerformance EU 5/26/2023 European Union: CENELEC Publishes New Standard EN IEC 60794-1-309:2023 — Optical Fiber Cables Test Methods
On May 26, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60794-1-309:2023, for optical fiber cable element test methods, including bleeding and evaporation of filling or flooding compounds using Method G9.
The date of withdrawal of the superseded version is May 23, 2026.
Official source, Official sourcePerformance, Safety Global, CB Scheme 5/12/2023 IECEE Adds New Test Report Forms (TRFs) in Week 19
On May 12, 2023, the following TRFs were published and added to the website.TRF No. TRF originator IEC60335_2_113B TÜV Rheinland Japan Ltd. IEC60598_2_12H Intertek Semko AB EU_GD_IEC60598_2_22I TÜV Rheinland LGA Products GmbH CA_ND_IEC60601_1_6K CSA Group EU_GD_IEC61643_11C_II UL Solutions (Demko) JP_ND_IEC62368_1E UL Solutions (JP) US_ND_IEC61010_031E UL Solutions (US) JP_ND_IEC60335_2_41M Japan Quality Assurance Organization (JQA) US_ND_IEC61010_1M UL Solutions (US) Performance, Sanitation Rwanda 4/25/2023 Rwanda: RSB Publishes Draft Standard DRS 561:2023 — Ceramic Water Filters
On April 25, 2023, the Rwanda Standards Board (RSB) published draft standard DRS 561:2023 for specifications of ceramic water filters.
The final date for submission of comments and opinions for stakeholders was May 26, 2023.
Official source, Official sourceREACH, Chemicals EU 5/8/2023 European Union: EC Publishes Regulation on Lead Restriction in PVC Under REACH Regulation Annex XVII
On May 8, 2023, the European Commission (EC) published Commission Regulation (EU) 2023/923 of 3 May 2023, amending Annex XVII to Regulation (EC) No. 1907/2006 of the European Parliament and of the Council regarding lead and its compounds in PVC.
Official source, Official sourceRoHS, Chemicals Ukraine 4/21/2023 Ukraine Publishes Resolution on the Amendment to the Technical Regulation on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
On April 21, 2023, the Cabinet of Ministers of Ukraine published under Decree No. 370 a resolution on the amendments to the technical regulation on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Official source, Official sourceRoHS, Chemicals EU 5/4/2023 European Union: EC Publishes Adoption Related to Exemption for Mercury in Melt Pressure Transducers for Capillary Rheometers Under Certain Conditions
On May 4, 2023, the European Commission (EC) published an adoption related to mercury in melt pressure transducers for specific capillary rheometers (RoHS exemption). The document awaits publication in the EUOJ.
Official sourceSafety Mauritania 1/27/2023 Mauritania Implements Verification of Conformity for Importing Products
Starting March 15, 2023, Mauritania’s Ministry of Trade, Industry, Handicrafts and Tourism enforced its conformity assessment procedure (PVCM) for the import of products shipped to Mauritania. Compliance of covered goods to applicable standards will be demonstrated with conformity documents issued by accredited entities, manufacturers’ in-house laboratories and/or testing.
Products that meet requirements are issued a Certificate of Conformity (CoC) (Certificat de Conformité, CdC). A certificate is required for any shipment made from June 1, 2023 (date of shipment).
Official sourceSafety United Kingdom 4/12/2023 United Kingdom Issues Notice of Publication for Reference Standards for Machinery
On April 12, 2023, the U.K. government released Notice of Publication 0081/23. It deals with references to standards for machinery in support of Supply of Machinery (Safety) Regulations 2008 (S.I. 2008/1597).
These are the designated standards under the Supply of Machinery (Safety) Regulations. In order to comply with the legislations, manufacturers can choose whether or not to apply designated standards or parts thereof. Designated standards are not mandatory, but they can simplify the process to meet the essential requirements set by the legislations. For this reason, when designated standards exist, they are commonly used by manufacturers.
Official sourceSafety Canada 4/14/2023 Canada: SCC Publishes Amendment Revision of CSA C22.2 NO. 0:20 — Canadian Electrical Code, Part II General Requirements
On April 14, 2023, the Standards Council of Canada (SCC) published an amendment revision of CSA C22.2 NO. 0:20. The standard deals with the general requirements of the Canadian electrical code, Part II.
Comments were accepted until May 16, 2023.
Official sourceSafety Global, CB Scheme 4/28/2023 IECEE Adds New Test Report Forms (TRFs) in Week 17
On April 28, 2023, new TRFs were published and added to the website.
Official sourceSafety Jordan 4/16/2023 Jordan: JSMO Adopts Jordanian Standards for Electrical and Electronic Products
On April 16, 2023, the Jordanian Standards and Metrology Organization (JSMO) approved some Jordanian standards addressing the charging system for the electric vehicles.
Please contact your local UL Solutions office for more information.Safety Kenya 4/20/2023 Kenya: KEBS Publishes Notice for Verification of Product Standardization Marks
On April 20, 2023, the Kenya Bureau of Standards (KEBS) published a notification for verification of standardization marks for imported products prior to placing them in the market and will be verifiable at the point of sale.
Official sourceSafety India 4/26/2023 India: MeitY Adds Additional Product Under Compulsory Registration Scheme for Electronics and IT Products
On April 26, 2023, India’s Ministry of Electronics and Information Technology (MeitY) published an amendment to Electronics and Information Technology Goods (Requirement of Compulsory Registration) Order 2021 to add additional products under the scheme.
Official sourceSafety USA 4/28/2023 USA: UL Solutions Publishes CSDS Proposal for Various Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery Standards
On April 28, 2023, UL Solutions published a CSDS proposal for various electric motor-operated hand-held tools, transportable tools and lawn and garden machinery standards.- UL 62841-3-6, Ed. 1, the Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 3-6: Transportable Diamond Drills with Liquid System
- UL 62841-3-10, Ed. 1, the Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery – Safety – Part 3-10: Particular Requirements for Transportable Cut-Off Machines
Safety EU 5/5/2023 European Union: CENELEC Publishes New Standard EN IEC 60335-2-34:2023 — Motor-Compressors
On May 5, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60335-2-34:2023, Household and Similar Electrical Appliances – Safety – Part 2-34: Particular Requirements for Motor-Compressors.
The date of withdrawal of the superseded version is May 5, 2026.
Official source, Official sourceSafety New Zealand 5/3/2023 New Zealand Publishes Draft DZ SNZ PAS 6010:2023 — Electric Vehicle (EV) Chargers for Commercial Applications
On May 3, 2023, Standards New Zealand released draft DZ SNZ PAS 6010:2023. This publicly available specification (PAS) deals with electric vehicle (EV) chargers for commercial applications.
The closing date for comments was May 19, 2023.
Official sourceSafety EU 5/5/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-34:2023/A11:2023 — Motor-Compressors
On May 5, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-34:2023/A11:2023, Household and Similar Electrical Appliances – Safety – Part 2-34: Particular Requirements for Motor-Compressors.
The date of withdrawal is May 5, 2026.
Official source, Official sourceSafety EU 5/5/2023 European Union: CENELEC Publishes New Standard EN IEC 60335-2-40:2023 — Electrical Heat Pumps, Air Conditioners and Dehumidifiers
On May 5, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60335-2-40:2023, Household and Similar Electrical Appliances – Safety – Part 2-40: Particular Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers.
The date of withdrawal of the superseded version is March 1, 2026.
Official source, Official sourceSafety EU 5/5/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-40:2023/A11:2023 — Electrical Heat Pumps, Air Conditioners and Dehumidifiers
On May 5, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-40:2023/A11:2023, Household and Similar Electrical Appliances – Safety – Part 2-40: Particular Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers.
Official source, Official sourceSafety EU 5/5/2023 European Union: CENELEC Publishes New Standard EN IEC 60335-2-75:2023 — Commercial Dispensing Appliances and Vending Machines
On May 5, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60335-2-75:2023, Household and Similar Electrical Appliances – Safety – Part 2-75: Particular Requirements for Commercial Dispensing Appliances and Vending Machines.
The date of withdrawal of the superseded version is May 5, 2026.
Official source, Official sourceSafety Singapore 4/6/2023 Enterprise Singapore Opens Public Consultation on Revision of Standard for Portable Gas Appliances
On April 6, 2023, Enterprise Singapore opened public consultation on the revision of the SS 401:1997 specification, Portable Gas Cookers – General Specifications and Test Methods (modified adoption of JIS S 2147:2017).
Comments were accepted until June 7, 2023.
Official source, Official sourceSafety EU 5/5/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-75:2023/A1:2023 — Commercial Dispensing Appliances and Vending Machines
On May 5, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-75:2023/A1:2023, Household and Similar Electrical Appliances – Safety – Part 2-75: Particular Requirements for Commercial Dispensing Appliances and Vending Machines.
Official source, Official sourceSafety Global 5/4/2023 IEC Publishes New Standard, IEC 61439-5:2023 — Assemblies for
Power Distribution in Public Networks
On May 4, 2023, the International Electrotechnical Commission (IEC) released IEC 61439-5:2023. This standard deals with low-voltage switchgear and control gear assemblies, particularly for assemblies for power distribution in public networks.
Official sourceSafety EU 5/5/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-75:2023/A2:2023 — Commercial Dispensing Appliances and Vending Machines
On May 5, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-75:2023/A2:2023, Household and Similar Electrical Appliances – Safety – Part 2-75: Particular Requirements for Commercial Dispensing Appliances and Vending Machines.
Official source, Official sourceSafety EU 5/5/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-75:2023/A11:2023 — Commercial Dispensing Appliances and Vending Machines
On May 5, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-75:2023/A11:2023, Household and Similar Electrical Appliances – Safety – Part 2-75: Particular Requirements for Commercial Dispensing Appliances and Vending Machines.
Official source, Official sourceSafety EU 5/5/2023 European Union: CENELEC Publishes Amended Standard EN 60670-24:2013/A11:2023 — Enclosures for Housing Protective Devices
On May 5, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN 60670-24:2013/A11:2023, for enclosures for housing protective devices and other power-dissipating electrical equipment.
Official source, Official sourceSafety USA 5/5/2023 USA: UL Solutions Publishes CSDS Proposal for Various Standards for Automatic Electrical Controls for Household and Similar Use
On May 5, 2023, UL Solutions published a CSDS proposal for various automatic electrical controls for household and similar use standards.- UL 60730-2-3, Ed. 2, the Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps
- UL 60730-2-14, Ed. 3, the Standard for Automatic Electrical Controls – Part 2-14: Particular Requirements for Electric Actuators
Safety Nepal 4/17/2023 Nepal: NBSM Publishes Draft Standard for Household and Similar Electrical Appliances, Safety Requirements for Infrared Hobs
On April 17, 2023, the Nepal Bureau of Standards and Metrology (NBSM) published a draft standard for household and similar electrical appliances detailing safety requirements for infrared hobs.
Official source, Official sourceSafety New Zealand 5/6/2023 New Zealand Publishes Draft DZ SNZ PAS 6011:2023 — Electric Vehicle (EV) Chargers for Residential Use
On May 6, 2023, Standards New Zealand released a draft of DZ SNZ PAS 6011:2023. This publicly available specification (PAS) deals with electric vehicle (EV) chargers for residential use.
The closing date for comments was May 19, 2023.
Official sourceSafety India 5/9/2023 India: MHI Amends Scheme and Implementation Timelines for Quality Control Order for Low-Voltage Switchgears and Control Gears
On May 9, 2023, India’s Ministry of Heavy Industries issued Electrical Equipment (Quality Control) Amendment Order 2023 to amend the applicable scheme as well as implementation timelines for quality control of low-voltage switchgears and control gears.
Official source, Official sourceSafety Canada 5/9/2023 Canada: SCC Publishes New Edition of C22.2 No. 60730-2-11 — Requirements for Energy Regulators
On May 9, 2023, the Standards Council of Canada (SCC) published a new edition of C22.2 No. 60730-2-11. This standard deals with automatic electrical controls, particularly for energy regulators.
Comments were accepted until May 31, 2023.
Official sourceSafety Tunisia 4/25/2023 Tunisia: INNORPI Publishes National Draft Standards for Various Household and Similar Electrical Equipment
On April 25, 2023, Tunisia’s National Institute for Standardization and Industrial Property (INNORPI) issued the Tunisian draft standards under Public Enquiry No. 428, which include the draft standards for household and similar electrical equipment, electrical installation and appliances in buildings, as well as electronic materials and components. Information about the relevant standards could be obtained or purchased from INNORPI during the public consultation period until June 24, 2023.
Official source, Official sourceSafety Global 5/12/2023 IEC Publishes New Standard, IEC 62620:2014+AMD1:2023 — Secondary Lithium Cells and Batteries for Use in Industrial Applications
On May 12, 2023, the International Electrotechnical Commission (IEC) released IEC 62620:2014+AMD1:2023. This standard is an amendment that deals with secondary lithium cells and batteries for use in industrial applications.
Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes New Standard, EN IEC 60335-2-23:2023 — Household Electrical Appliances for Skin or Hair Care
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60335-2-23:2023, Household and Similar Electrical Appliances – Safety – Part 2-23: Particular Requirements for Skin or Hair Care.
The date of withdrawal of the superseded version is March 1, 2026.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-23:2023/A1:2023 — Household Electrical Appliances for Skin or Hair Care
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-23:2023/A1:2023, Household and Similar Electrical Appliances – Safety – Part 2-23: Particular Requirements for Skin or Hair Care.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-23:2023/A11:2023 — Household Electrical Appliances for Skin or Hair Care
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-23:2023/A11:2023, Household and Similar Electrical Appliances – Safety – Part 2-23: Particular Requirements for Skin or Hair Care.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Amended Standard EN 60335-2-45:2002/A11:2023 — Household Electrical Appliances for Portable Heating Tools
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN 60335-2-45:2002/A11:2023, Household and Similar Electrical Appliances – Safety – Part 2-45: Particular Requirements for Portable Heating Tools and Similar Appliances.
Official source, Official sourceSafety EU 5/12/2023 European Union CENELEC Publishes New Standard, EN IEC 60335-2-95:2023 — Drives for Vertically Moving Garage Doors for Residential Use
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60335-2-95:2023, Household and Similar Electrical Appliances – Safety – Part 2-95: Particular Requirements for Drives for Vertically Moving Garage Doors for Residential Use.
The date of withdrawal of the superseded version is May 12, 2026.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-95:2023/A11:2023 — Drives for Vertically Moving Garage Doors for Residential Use
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-95:2023/A11:2023, Household and Similar Electrical Appliances – Safety – Part 2-95: Particular Requirements for Drives for Vertically Moving Garage Doors for Residential Use.
Official source, Official sourceSafety Uruguay 4/28/2023 Uruguay: URSEA Publishes Draft Amendments to Annex II of Safety Regulations for Low-Voltage Electrical Products
On April 28, 2023, Uruguay’s Regulatory Unit for Energy and Water Services (URSEA) published Public Consultation No. 59 Amendments to Annex II of the Safety Regulations for Low-Voltage Electrical Products.
Contributions and/or observations could be submitted until June 26, 2023.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes New Standard, EN IEC 60335-2-97:2023 — Drives for Shutters, Awnings, Blinds and Similar Equipment
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60335-2-97:2023, Household and Similar Electrical Appliances – Safety – Part 2-97: Particular Requirements for Drives for Shutters, Awnings, Blinds and Similar Equipment.
The date of withdrawal of the superseded version is March 1, 2026.
Official source, Official sourceSafety Canada 5/8/2023 Canada: SCC Publishes New Edition of C22.2 NO. 62109-3 — Requirements for Electronic Devices in Combination with Photovoltaic Elements
On May 8, 2023, the Standards Council of Canada (SCC) published a new standard, C22.2 NO. 62109-3.
Comments were accepted until May 16, 2023.
Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-97:2023/A1:2023 — Drives for Shutters, Awnings, Blinds and Similar Equipment
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-97:2023/A1:2023, Household and Similar Electrical Appliances – Safety – Part 2-97: Particular Requirements for Drives for Shutters, Awnings, Blinds and Similar Equipment.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-97:2023/A11:2023 — Drives for Shutters, Awnings, Blinds and Similar Equipment
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-97:2023/A11:2023, Household and Similar Electrical Appliances – Safety – Part 2-97: Particular Requirements for Drives for Shutters, Awnings, Blinds and Similar Equipment.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Amended Standard EN 60335-2-99:2003/A11:2023 — Commercial Electric Hoods
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN 60335-2-99:2003/A11:2023, for safety with particular requirements for commercial electric hoods.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes New Standard, EN IEC 60335-2-103:2023 — Drives for Gates, Doors and Windows
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60335-2-103:2023, Household and Similar Electrical Appliances – Safety – Part 2-103: Particular Requirements for Drives for Gates, Doors and Windows.
The date of withdrawal of the superseded version is May 12, 2026.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-103:2023/A1:2023 — Drives for Gates, Doors and Windows
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-103:2023/A1:2023, Household and Similar Electrical Appliances – Safety – Part 2-103: Particular Requirements for Drives for Gates, Doors and Windows.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-103:2023/A2:2023 — Drives for Gates, Doors and Windows
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-103:2023/A2:2023, Household and Similar Electrical Appliances – Safety – Part 2-103: Particular Requirements for Drives for Gates, Doors and Windows.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-103:2023/A11:2023 — Drives for Gates, Doors and Windows
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-103:2023/A11:2023, Household and Similar Electrical Appliances – Safety – Part 2-103: Particular Requirements for Drives for Gates, Doors and Windows.
Official source, Official sourceSafety EU 5/12/2023 European Union: CENELEC Publishes Corrigendum Standard EN IEC 62841-4-7:2022/AC:2023-05 — Pedestrian-Controlled Walk-Behind Lawn Scarifiers and Aerators
On May 12, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a corrigendum standard, EN IEC 62841-4-7:2022/AC:2023-05, for electric motor-operated hand-held tools, transportable tools and lawn and garden machinery safety requirements particular to pedestrian-controlled walk-behind lawn scarifiers and aerators.
Official source, Official sourceSafety Global, CB Scheme 5/16/2023 IECEE Adds New Test Report Forms (TRFs) in Week 20
On May 16, 2023, the following TRFs were published and added to the website.TRF No. TRF originator AU_NZ_ND_IEC60335_2_100D NZ Electrotechnical Committee/Standards New
ZealandAU_NZ_ND_IEC60335_2_101J NZ Electrotechnical Committee/Standards New
ZealandAU_NZ_ND_IEC60335_2_102H NZ Electrotechnical Committee/Standards New
ZealandAU_NZ_ND_IEC60335_2_103J NZ Electrotechnical Committee/Standards New
ZealandAU_NZ_ND_IEC60335_2_105G NZ Electrotechnical Committee/Standards New
ZealandAU_NZ_ND_IEC60335_2_105H NZ Electrotechnical Committee/Standards New
ZealandSafety EU 5/19/2023 European Union: CENELEC Publishes New Standard, EN IEC 60335-2-81:2023 - Foot Warmers and Heating Mats
On May 19, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60335-2-81:2023, Household and Similar Electrical Appliances – Safety – Part 2-81: Particular Requirements for Foot Warmers and Heating Mats.
The date of withdrawal of the superseded version is May 19, 2026.
Official source, Official sourceSafety EU 5/19/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-81:2023/A1:2023 — Foot Warmers and Heating Mats
On May 19, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-81:2023/A1:2023, Household and Similar Electrical Appliances – Safety – Part 2-81: Particular Requirements for Foot Warmers and Heating Mats.
Official source, Official sourceSafety EU 5/19/2023 European Union: CENELEC Publishes Amended Standard EN IEC
60335-2-81:2023/A2:2023 — Foot Warmers and Heating Mats
On May 19, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60335-2-81:2023/A2:2023, Household and Similar Electrical Appliances – Safety – Part 2-81: Particular Requirements for Foot Warmers and Heating Mats.
Official source, Official sourceSafety EU 5/23/2023 European Union: Parliament Publishes Latest Version of General Product Safety Regulation
On May 23, 2023, the European Parliament and the Council of the European Union published Regulation (EU) 2023/988 of the European Parliament and of the Council of 10 May 2023 on general product safety, amending Regulation (EU) No. 1025/2012 of the European Parliament and of the Council and Directive (EU) 2020/1828 of the European Parliament and the Council, and repealing Directive 2001/95/EC of the European Parliament and of the Council and Council Directive 87/357/EEC. This latest version incorporates elements of the regulation on standardization organizations, rules on representative action mechanisms for the protection of consumers and a number of product safety regulations into one single directive.
This new directive will be mandatory starting Dec. 13, 2024.
Official sourceSafety Taiwan 5/11/2023 Taiwan: BSMI Announces New Safety Standard for Heated Tobacco Devices and the Revised Standard for Secondary Lithium Cells and Batteries
On May 11, 2023, Taiwan‘s Bureau of Standards, Metrology and Inspection (BSMI) announced in the National Standards of the Republic of China (CNS) service system the release of the national standards for safety testing of heated tobacco devices and secondary lithium cells and batteries for use in industrial applications.
Official source, Official sourceSafety China 5/4/2023 China: CQC Revises Voluntary Safety Certification Rules of Low-Voltage Reactive Power Compensation Switchgear Components (CQC11-462197-2023) On May 4, 2023, the China Quality Certification Centre issued a notice on the revised safety certification rules for low-voltage reactive power compensation switching devices (CQC11-462197-2023), which was effective on the same day.
Safety South Africa 3/9/2023 South Africa: SABS Publishes Draft Standard SANS 60335-2-115 Ed. 1, Household and Similar Electrical Appliances – Safety – Part 2-115: Particular Requirements for Skin Beauty Care Appliances
On March 9, 2023, the South African Bureau of Standards (SABS) published draft standard SANS 60335-2-115:2023 Ed. 1, Household and Similar Electrical Appliances – Safety – Part 2-115: Particular Requirements for Skin Beauty Care Appliances.
The closing date for comments was May 12, 2023.
Official source, Official sourceSafety South Africa 3/9/2023 South Africa: SABS Publishes Draft Standard SANS 60335-2-113, Ed. 1, Household and Similar Electrical Appliances – Safety – Part 2-113: Particular Requirements for Cosmetic and Beauty Care Appliances Incorporating Lasers and Intense Light Sources
On March 9, 2023, the South African Bureau of Standards (SABS) published draft standard SANS 60335-2-113:2023, Ed. 1, Household and Similar Electrical Appliances – Safety – Part 2-113: Particular Requirements for Cosmetic and Beauty Care Appliances Incorporating Lasers and Intense Light Sources.
The closing date for comments was May 12, 2023.
Official source, Official sourceSafety South Africa 3/9/2023 South Africa: SABS Publishes Draft Standard SANS 60335-2-111, Ed. 1, Safety Requirements for Electric Ondol Mattresses with Non-Flexible Heated Parts
On March 9, 2023, the South African Bureau of Standards (SABS) published draft standard SANS 60335-2-111:2023, Ed. 1, Household and Similar Electrical Appliances – Safety – Part 2-111: Particular Requirements for Electric Ondol Mattress with a Non-flexible Heated Part.
The closing date for comments was May 12, 2023.
Official source, Official sourceSafety South Africa 3/9/2023 South Africa: SABS Publishes Draft Standard SANS 60335-2-34, Ed. 6, Household and Similar Electrical Appliances – Safety – Part 2-34: Particular Requirements for Motor-Compressors
On March 9, 2023, the South African Bureau of Standards (SABS) published draft standard SANS 60335-2-34:2023, Ed. 6, Household and Similar Electrical Appliances – Safety – Part 2-34: Particular Requirements for Motor-Compressors.
The closing date for comments was May 12, 2023.
Official source, Official sourceSafety South Africa 3/30/2023 South Africa: SABS Publishes Draft Standard SANS 60335-1, Ed. 4, Household and Similar Electrical Appliances – Safety – Part 1: General Requirements
On March 30, 2023, the South African Bureau of Standards (SABS) published draft standard SANS 60335-1, Ed. 4, Household and Similar Electrical Appliances – Safety – Part 1: General Requirements.
The closing date for comments was May 31, 2023.
Official source, Official sourceSafety Global, CB Scheme 5/17/2023 IECEE Adds New Equipment List in Week 20
On May 17, 2023, the following testing equipment list with provisional status was published and added to the website.- IEC 62275:2022
- IEC 62275:2018
- IEC 62275:2013
- IEC 62275:2006
- IEC 62893-4-1:2020
Safety Global 5/23/2023 IEC Publishes New Standard, IEC 60076-19-1:2023, Detailing Rules for the Determination of Uncertainties in the Measurement of the Losses of Power Transformers
On May 23, 2023, the International Electrotechnical Commission (IEC) released IEC 60076-19-1:2023. This standard deals with rules for the determination of uncertainties in the measurement of the losses of power transformers.
Official sourceSafety Global 5/23/2023 IEC Publishes New Standard, IEC 63474:2023, for Measuring Networked Standby Power Consumption of Edge Equipment
On May 23, 2023, the International Electrotechnical Commission (IEC) released IEC 63474:2023. This standard deals with electrical and electronic household and office equipment, and particularly the measurement of networked standby power consumption of edge equipment.
Official sourceSafety Tanzania 4/28/2023 Tanzania: TBS Prepares Draft Standard DTZS EDC1 (1960) — High-Pressure Cleaners and Steam Cleaners
On April 28, 2023, the Tanzania Bureau of Standards (TBS) prepared a draft of DTZS EDC1 (1960) in reference to IEC 60335-2-79 for high-pressure cleaners and steam cleaners.
The deadline for comments and suggestions was June 28, 2023.
Official source, Official source, Official sourceSafety EU 5/26/2023 European Union: CENELEC Publishes New Standard, EN IEC 61010-031:2023 — Hand-Held and Hand-Manipulated Probe Assemblies
On May 26, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 61010-031:2023, Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use – Part 031: Safety Requirements for Hand-Held and Hand-Manipulated Probe Assemblies for Electrical Test and Measurement.
The date of withdrawal of superseded version is March 6, 2026.
Official source, Official sourceSafety Tanzania 4/28/2023 Tanzania: TBS Prepares Draft Standard DTZS EDC1 (1961) — Amusement Machines and Personal Service Machines
On April 28, 2023, the Tanzania Bureau of Standards (TBS) prepared a draft of DTZS EDC1 (1961) in reference to IEC 60335-2-82 for amusement machines and personal service machines.
The deadline for comments and suggestions was June 28, 2023.
Official source, Official source, Official sourceSafety Tanzania 4/28/2023 Tanzania: TBS Prepares Draft Standard DTZS EDC1 (1962) — Fabric Steamers
On April 28, 2023, the Tanzania Bureau of Standards (TBS) prepared a draft of DTZS EDC1 (1962) in reference to IEC 60335-2-85 for fabric steamers.
The deadline for comments and suggestions was June 28, 2023.
Official source, Official source, Official sourceSafety Tanzania 4/28/2023 Tanzania: TBS Prepares Draft Standard DTZS EDC1 (1963) — Commercial Refrigerating Appliances and Ice Makers
On April 28, 2023, the Tanzania Bureau of Standards (TBS) prepared a draft of DTZS EDC1 (1963) in reference to IEC 60335-2-89 for commercial refrigerating appliances and ice makers with an incorporated or remote refrigerant unit or motor-compressor.
The deadline for comments and suggestions was June 28, 2023.
Official source, Official source, Official sourceSafety China 5/11/2023 China: CQC Publishes Notice on Implementation of New Standards and Amended Voluntary Safety Certification Rules for Automatic Electrical Controls for Household and Similar Use
On May 11, 2023, the China Quality Certification Centre (CQC) issued a notice on the implementation of new standards and the second revision of CQC11-448321-2016 for the CQC voluntary safety certification of automatic electrical controls for household and similar use.
Official sourceSafety South Korea 4/17/2023 South Korea: Consumer Goods Safety KATS Opens Public Consultation on Safety Standards for Reusable Batteries (KC 10031)
On April 17, 2023, the South Korean Agency for Technology and Standards (KATS) opened a public consultation under Notice No. 2023-0114 on the establishment of secondary cells and batteries containing alkaline or other non-acid electrolytes related to safety requirements for secondary lithium batteries to repurpose used lithium batteries (KC 10031).
Comments were accepted until June 16, 2023.
Official source, Official sourceSafety South Korea 4/17/2023 South Korea: Consumer Goods Safety KATS Opens Public Consultation on Safety Management Operation Guidelines
On April 17, 2023, the South Korean Agency for Technology and Standards (KATS) opened a public consultation under Notice No. 2023-0113 on the partial revision of Electrical Appliances and Household Items Safety Management Operation Guidelines.
Comments were accepted until June 16, 2023.
Official sourceSafety Mauritania 4/6/2023 Mauritania Terminates PVOC Program
On April 6, 2023, the Ministry of Trade, Industry, Handicrafts and Tourism of Mauritania issued a notice via their designated certification body that they are stopping their conformity assessment program (PVCM) indefinitely. This means the program will not be implemented at all.
Please contact your local UL Solutions office for more information.Safety, Performance Global 4/26/2023 ISO Publishes 5th Edition of Standard for Safety-Related Parts of Control Systems (ISO 13849-1:2023)
On April 26, 2023, the International Organization for Standardization (ISO) published ISO 13849-1:2023, Safety of Machinery – Safety-Related Parts of Control Systems – Part 1: General Principles for Design. This standard’s fourth edition guides manufacturers in designing and integrating safety-related parts of control systems (SRP/CS) that perform safety functions in their machines (of all kinds), including software design.
Official sourceSafety, Performance Global 5/23/2023 IEC Publishes New Standard, IEC 62282-8-301:2023 — Performance
Test Methods of Energy Storage Systems
On May 23, 2023, the International Electrotechnical Commission (IEC) released IEC 62282-8-301:2023. This standard deals with performance and test methods of energy storage systems using fuel cell modules in reverse mode — specifically, power-to-methane energy systems based on solid oxide cells including reversible operation.
Official sourceSafety, Performance China 5/23/2023 China: CQC Revises Voluntary Safety and Performance Certification Rules of Storage Batteries for Photovoltaic Energy Systems (PVES)
On May 23, 2023, the China Quality Certification Centre (CQC) issued a notice on an amendment of Certification Requirements for Storage Batteries Used in Photovoltaic Power Generation Systems, which came into effect on May 26, 2023.
Official sourceSanitation China 4/19/2023 China: CFSA Publishes Draft National Food Safety Standard on General Safety Requirements for Food Contact Materials and Articles (GB 4806.1)
On April 19, 2023, the National Center for Food Safety Risk Assessment published a draft national food safety standard on general safety requirements for food contact materials and articles which would replace standard GB 4806.1-2016.
The proposed new edition standard received public comments until May 15, 2023.
Official sourceSanitation Germany 5/2/2023 Germany Publishes Draft Change in Assessment Basis for Enamel and Ceramic Materials in Contact with Drinking Water (Enamel Assessment Basis)
On May 2, 2023, Germany’s Federal Ministry for Economic Affairs and Climate Protection published a draft change in the assessment basis for enamel and ceramic materials in contact with drinking water (enamel assessment basis).
Comments are accepted until Aug. 10, 2023.
Official sourceSustainability Ukraine 4/18/2023 Ukraine Opens Public Consultation on Procedure for Warranty Repair or Replacement of Technically Complex Household Goods
On April 18, 2023, the Cabinet of Ministers of Ukraine opened a public consultation on the approval of the procedure for warranty repair (maintenance) or warranty replacement of technically complex household goods.
Comments were accepted until May 18, 2023.
Please contact your local UL Solutions office for more information.Sustainability Canada 4/18/2023 Canada: ECCC Publishes Draft Regulatory Framework Paper on Recycled Content and Labelling Rules for Plastics
On April 18, 2023, Environment and Climate Change Canada (ECCC) published a draft regulatory framework paper on recycled content and labeling rules for plastics.
Partners, stakeholders and the public were invited to provide feedback on anything raised in this document until May 18, 2023.
Official source, Official sourceSustainability Canada 4/18/2023 Canada: ECCC Publishes Draft Technical Paper on Plastics Registry
On April 18, 2023, Environment and Climate Change Canada (ECCC) published a draft technical paper on a plastics registry.
The government of Canada invited interested partners, stakeholders and members of the public to provide written comments until May 18, 2023.
Official source, Official sourceSustainability Ukraine 4/21/2023 Ukraine Publishes Draft Law on Packaging and Packaging Waste
On April 21, 2023, Ukraine’s Ministry of Environmental Protection and Natural Resources published a draft law on packaging and packaging waste through the World Trade Organization (WTO) website.
The deadline for accepting comments and proposals to the specified normative act was May 20, 2023.
Official source, Official source, Official sourceSustainability EU 5/22/2023 European Union Council Adopts its Position on Commission Proposal for Establishing a Framework for Setting Eco-Design Requirements for Sustainable Products
On May 22, 2023, the EU Council adopted its position on the proposed European Commission (EC) regulation establishing a framework for setting eco-design requirements for sustainable products.
The agreed general approach formalizes the Council’s negotiating position. It provides the Council presidency with a mandate for negotiations with the European Parliament, which will start as soon as the Parliament adopts its position.
Official source, Official sourceWater Efficiency GCC 5/22/2023 GSO Publishes Gulf Technical Regulations on Water Conservation Tools
The GCC Standardization Organization (GSO) announced the final approval of Gulf Technical Regulations for Water Conservation Tools, with the purpose of introducing new requirements for water conservation tools and the use of the green label.
Official sourceWireless Taiwan 4/26/2023 Taiwan: NCC Publishes Revision of Technical Specifications for Radio Frequency Equipment of Mobile Communication Base Stations
On April 26, 2023, the National Communications Commission of Taiwan published a revision of Technical Specifications for Radio Frequency Equipment of Mobile Communication Base Stations (No. 11265006491) to conform to international standards, which came into effect on the same day.
Official source, Official sourceWireless India 4/27/2023 India: TEC Exempts Certain Parameters for Mobile Radio Trunking System Under MTCTE Scheme
On April 27, 2023, India’s Telecommunication Engineering Centre (TEC) published Notification No. 5-5/2021-TC/TEC regarding an exemption pertaining to certain parameters of mobile radio trunking systems under the Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.
Official source, Official sourceWireless Taiwan 4/26/2023 Taiwan: NCC Opens Public Consultation on Revision of Technical Specifications for Mobile Communication and Telecommunications Terminal Equipment
On April 26, 2023, the National Communications Commission of Taiwan opened a public consultation period on the revision of Technical Specifications for Mobile Communication and Telecommunications Terminal Equipment (No. 11265006191).
Comments were accepted until May 10, 2023.
Official source, Official sourceWireless Thailand 4/28/2023 Thailand: NBTC Publishes Technical Requirements for Equipment that Uses the 6 GHz Band
On April 28, 2023, the Office of the National Broadcasting and
Telecommunications Commission (NBTC) of Thailand published the following documents:- Criteria of Authorization to Use Frequency 5.725-6.425 GHz
- Technical Standards of Telecommunication Equipment and Radio Communication Equipment that Uses a Frequency of 5.925-6.425 GHz (NBTC TS 1039-2566)
- Criteria of the Use of Frequency and Radiocommunication Equipment that are Authorized for General Use (Issue 2)
Official source, Official source, Official source, Official source
Wireless Iraq 4/30/2023 Iraq: CMC Publishes Draft Regulation for Unmanned Aircraft (UAV)
On April 30, 2023, Iraq’s Communications and Media Commission (CMC) opened a public consultation regarding the draft regulation for unmanned aircraft (UAV) or drones.
Comments were accepted until May 30, 2023.
Official source, Official sourceWireless Canada 5/1/2023 Canada: ISED Publishes Draft Technical Requirement for Flexible Use of Broadband Equipment Operating in the Band 3900-3980 MHz
On May 1, 2023, Canada’s Innovation, Science and Economic Development (ISED) department opened public consultation RSS-198, Issue 1, Flexible-Use Broadband Equipment Operating in the Band 3900-3980 MHz.
Comments can be submitted until July 14, 2023.
Official source, Official sourceWireless Thailand 5/9/2023 Thailand: NBTC Publishes Guide for Equipment Using 6 GHz Band
On May 9, 2023, Thailand’s Office of the National Broadcasting and Telecommunications Commission (NBTC) published a guide for communications equipment that uses the 5.925-6.425 GHz frequency.
Official source, Official sourceWireless Hong Kong 4/3/2023 Hong Kong: OFCA Publishes Frequency Allocation Table of April 2023
On April 3, 2023, Hong Kong’s Office of the Communications Authority (OFCA) published the Hong Kong Table of Frequency Allocations to provide the latest overview of frequency allocations in Hong Kong, which came into effect on the announcement date.
Official source, Official sourceWireless Bahamas 5/5/2023 Bahamas: URCA Opens Public Consultation on Demand for Enhanced Internet Connectivity and 5G
On May 5, 2023, the Bahamian Utilities Regulation and Competition Authority (URCA) opened a public consultation on the demand for enhanced internet connectivity and 5G.
Comments were accepted until June 5, 2023.
Official source, Official sourceWireless Nepal 5/13/2023 Nepal: NTA Publishes Update on Type Approval of Cellular Devices
On May 13, 2023, the Nepal Telecommunications Authority (NTA) published a notice on the implementation of mobile device management system (MDMS). This notice also provides information on another notice issued by the Customs Department related to mobile phones that passengers can bring with them to customs facilities.
Official source, Official sourceWireless Sinre
5/12/2023 Singapore: IMDA Announces Allocation of 6 GHz Band for WLAN
On May 12, 2023, the Infocomm Media Development Authority (IMDA) of Singapore announced that it will allocate 500 MHz of spectrum in the 6 GHz band (5,925-6,425 MHz) for RLAN/Wi-Fi use.
Official sourceWireless South Africa 5/23/2023 South Africa: ICASA Announces Allocation of 6 GHz Band for WLAN
On May 23, 2023, the Independent Communications Authority of South Africa (ICASA) released a media statement to its stakeholders that it will allocate the lower 6 GHz band (5,925-6,425 MHz) for RLAN/Wi-Fi use. In the same media statement, ICASA also announced the publication of Amended Radio Frequency Spectrum Regulations 2023.
Official source, Official sourceWireless Argentina 5/16/2023 Argentina: Enacom Allocates 5925 and 7125 MHz for Wi-Fi 6E
On May 16, 2023, Argentina’s National Communication Entity (ENACOM) published Resolution 756/2023, attributing the 5925 and 7125 MHz frequency bands for Wi-Fi 6E services.
Official source, Official sourceWireless Australia 5/18/2023 Australia: ACMA Amends Radiocommunications (Low Interference Potential Devices) Regulation
On May 18, 2023, the Australian Communications and Media Authority (ACMA) published Radiocommunications (Low Interference Potential Devices) Class License Variation 2023 (No. 2).
Official source, Official sourceWireless Brazil 5/19/2023 Brazil: Anatel Updates List of Technical Requirements for Categories I and III
On May 19, 2023, Brazil’s National Telecommunications Agency (Anatel) updated its lists of technical requirements and test procedures applicable to Category I and III telecommunications products.
Official source, Official source, Official sourceWireless Canada 5/17/2023 Canada: ISED Publishes Draft Technical Requirements for Equipment Certification of License — Exempt C-V2X Radio Apparatuses Operating in the 5895-5925 MHz Band
On May 17, 2023, Canada’s Innovation, Science and Economic Development (ISED) department opened public consultation RSS-252, Issue 2, Intelligent Transportation Systems (ITS) On-Board Units (OBUs) in the 5895-5925 MHz Band.
Comments can be submitted until July 28, 2023.
Official source, Official source-
- May 2023 updates
Regulation
Country
Published Date
Summary
Chemicals
Europe
6/21/2023
EC Drafts Regulation to Revise Restriction for Cyclosiloxaneunder REACH Regulation entry 70
The European Commission (EC) has drafted Commission Regulation (EU) amending Annex XVII to Regulation (EC) No 1907/2006 (REACH) as regards octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6).
The draft will replace Entry 70 of Annex XVII to specify that D4, D5 and D6 shall not be placed on the market- as a substance on its own,
- as a constituent of other substances, or
- in mixtures
Chemicals
USA
7/24/2023
U.S. - Minnesota Prohibits Lead and Cadmium in Consumer Products
Minnesota has enacted the law that will prohibit the manufacture, sale or distribution of product containing:
- Lead above 90 ppm; or
- Cadmium above 75 ppm.
Covered products are:- jewelry
- toys
- cosmetics and personal care products
- puzzles, board games, and similar games
- play sets and structures
- outdoor games
- school games
- pots and pans
- cups, bowls, other food containers
- craft supplies and jewelry-making supplies
- chalk, crayons, other art supplies
- fidget spinners
- costumes, accessories, and seasonal party supplies
- keys, key chains and key ring
- clothing, footwear
Appliances
Europe
6/29/2023
On June 29, 2023 the Regulation (Eu) 2023/1230 Of The European Parliament And Of The Council on Machinery and Repealing Directive 2006/42/EC has been published on the Official Journal of the European Union. The new regulation enters into force twenty days after its publication in the OJ and it shall apply from 14 January 2027. Regulation (EU) 2023/1230 establishes new rules to adapt to emerging risks deriving from new machine technologies and guarantee the general safety of users.
Toys
Canada
6/23/2023
Health Canada Proposes Changes to SOR/2011-17 Toys Regulations; Seeks Feedback until September 2023
Health Canada is proposing changes to SOR/2011-17 Toys Regulations. The notice outlines the proposed changes and includes a questionnaire for people in Canada to provide feedback.
Key considerations for sending feedback on changes to the regulations being considered:- toxic substances
- corrosive, irritant or sensitizing substances
- specific toxic substances (boric acid and salts of boric acid)
- migration of certain elements
- finger paints
- liquids, pastes, putties, gels, powders and items of avian feather origin
- chemical toys (sets) other than experimental sets
Chemicals
Europe
6/14/2023
The European Chemicals Agency (ECHA) has added two new chemicals to the Candidate List of substances of very high concern.
Entries added to the Candidate List on 14 June 2023:1. Diphenyl (2,4,6-trimethylbenzoyl)phosphine oxide
- Reason for inclusion: Toxic for reproduction (Article 57c)
- Examples of use(s): Inks and toners, coating products, photo-chemicals, polymers, adhesives and sealants and fillers, putties, plasters, modelling clay
2. Bis (4-chlorophenyl) sulphone
- Reason for inclusion: vPvB (Article 57 e)
- Examples of use(s): Manufacture of chemicals, plastic products and rubber products.
Medical products
Global
6/15/2023
IECEE CTL Provides Decision on ITAV Equipment Certifications to IEC 60601-1
On June 15th, the IECEE CTL published PDSH-2208, which provides clarification on certifying information technology equipment to IEC 60601-1. The decision is clear that test labs may no longer issue IECEE CB Test Reports to IEC 60601-1. The decision is based on the coverage of IEC 60601-1 as documented in the scope and defined terms of the standard, as well as additional requirements documented in multiple revisions of OD-2055 over the past several years. Valid evaluation options and services do remain for information technology equipment that may require evaluation to IEC 60601-1.Consumer Products
Europe
3/22/2023
EU Proposes Green Claims Directive
The European Commission (EC) issued a proposal of Directive on the substantiation and communication of explicit environmental claims (Green Claims Directive) on consumer products.
The Directive aims at protecting consumers and companies from unclear or poorly substantiated environmental claims ('greenwashing') and complements the proposed changes to the Unfair Commercial Practices Directive.
The proposed text includes rules on the assessment required to substantiate explicit environmental claims, the communication of such claims, the verification of claims and labelling schemes, including from a third party verification body.Juvenile Products
Canada
6/7/2023
Canada Publishes SOR/2023-101 Carriages and Strollers Regulations
Canada has published SOR/2023-101 Carriages and Strollers Regulations that repeals and replaces the Carriages and Strollers Regulations (SOR/2016-167) made under the Canada Consumer Product Safety Act.
The new regulations address five categories of requirements for carriages and strollers:- 1. Mechanical requirements
- Applied coating materials requirements
- Toxicological requirements
- Phthalates requirements
- Information and warning requirements
Official sourceToys
Global
5/23/2023
The International Organization for Standardization (ISO) has released ISO 8124-2:2023 Safety of toys — Part 2: Flammability.
This document specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a small source of ignition.
The test methods described in Clause 5 are used for the purposes of determining the flammability of toys under the particular test conditions specified. The test results thus obtained cannot be considered as providing an overall indication of the potential fire hazard of toys or materials when subjected to other sources of ignition.
Official sourceWireless
China
6/1/2023
On October 13, 2021 Ministry of Industry and Information Technology (MIIT) in China issued "Notice No (2021) No. 129: Notice of the Ministry of Industry and Information Technology on Strengthening and Regulating the Radio Management of the 2400MHz, 5100MHz and 5800MHz Frequency Bands." which will become mandatory from 15 October 2023. This notice includes IPv6 requirements, adjusts slightly the requirements for spurious emission, and introduces a new test requirement of the interference avoidance mechanism defined in Appendix 2 in the notice.
Official sourceIEC 62368-1
Global
5/26/2023
The IEC 62368-1 4th edition was published on May 26th.
Official sourceChemicals
EU
5/8/2023
EU Publishes Commission Regulation (EU) 2023/923 of 3 May 2023 amending Annex XVII to Regulation (EC) No 1907/2006 of the European Parliament and of the Council as regards lead and its compounds in PVC
The European Commission has published Commission Regulation (EU) 2023/923 amending Annex XVII to Regulation (EC) No. 1907/2006 of the European Parliament and of the Council as regards lead and its compounds in PVC.
This revises the REACH's restriction for lead and its compounds falling under entry 63 to Annex XVII. Lead shall not be detected in concentrations of equal to more than 0.1% in PVC polymer and copolymer articles. The amendment also adds some derogations such as packaging, toys, electric products and food contact materials.
Official sourceChemicals
South Africa
3/24/2023
South Africa DFFE Publishes Consultation on the Draft National Regulations for the Management of Mercury
On March 24, 2023, the Department of Forestry, Fisheries and the Environment (DFFE) issued Consultation on the Draft National Regulations for the Management of Mercury in South Africa, which includes phase-out of mercury-added products such as batteries and lamps.
Comments were accepted until April 22, 2023.
Official sourceChemicals
EU
3/22/2023
European Union ECHA Publishes Proposals for New Persistent Organic Pollutants (POPs)
On March 22, 2023, the European Chemicals Agency (ECHA) published draft reports for substances, including chlorinated paraffins and long-chain perfluorocarboxylic acids, that are expected to be or have already been proposed for listing as POPs under the Stockholm Convention.
The public consultations will close on May 17, 2023 at 23:59 Helsinki time (EET/EEST).
Official sourceChemicals
China
3/15/2023
China MEE Publishes Draft Regulations on POPs Added to Stockholm Convention
On March 15, 2023, the China Ministry of Ecology and Environment (MEE) published a draft regulation on chemicals that have been added to the Stockholm Convention on Persistent Organic Pollutants (POPs). The chemicals subject to the draft regulations are hexachlorobutadiene (HCBD), pentachlorophenol (PCP) and its salts and esters, polychlorinated naphthalenes (PCNs), decabromodiphenyl ether (decaBDE) and short-chain chlorinated paraffins (SCCPs).
Official source, Official sourceChemicals
South Korea
4/11/2023
South Korea ME Publishes Draft Administrative Notice for All Types of Persistent Pollutants
On April 11, 2023, the Ministry of Environment (ME) published a draft administrative notice to amend the list of POPs and specify uses exempted from restrictions.
Individuals or organizations who have opinions on this amendment were requested to submit a written opinion to the Minister of Environment until May 2, 2023.
Official source, Official sourceCyber Security
Kosovo
2/27/2023
Kosovo Government Issues Law on Cyber Security
On February 27, 2023, the Assembly of the Republic of Kosovo issued Law No. 08/L-173 for Cyber Security to establish a legal basis to prevent cybercrime and improve computer security. This law comes into force fifteen (15) days after publication in the Official Journal of the Republic of Kosovo, which is March 14, 2023.
Official sourceCyber Security
Tanzania
3/28/2023
Tanzania TBS Prepares Draft Standard DTZS EDC6 (1938) - Information Technology Home Network Security
On March 28, 2023, the Tanzania Bureau of Standards (TBS) prepared draft DTZS EDC6 (1938) standard in reference to ISO/IEC 24767-1:2008 for security requirements of home network.
The final date for submission of comments and opinions for stakeholders is May 28, 2023.
Official source, Official sourceCyber Security
Tanzania
3/28/2023
Tanzania TBS Prepares Draft Standard DTZS EDC4 (1927) - General Requirements for Information Security, Cybersecurity and Privacy Protection
On March 28, 2023, the Tanzania Bureau of Standards (TBS) prepared draft DTZS EDC4 (1927) standard in reference to ISO/IEC 15408-1:2022 for introduction and general model of evaluation criteria for IT security.
The final date for submission of comments and opinions for stakeholders is May 28, 2023.
Official sourceCyber Security
Tanzania
3/28/2023
Tanzania TBS Prepares Draft Standard DTZS EDC4 (1928) - Security Functional Components of Information Security, Cybersecurity and Privacy Protection
On March 28, 2023, the Tanzania Bureau of Standards (TBS) prepared draft DTZS EDC4 (1928) standard in reference to ISO/IEC 15408-2:2022 for security functional components of evaluation criteria for IT security.
The final date for submission of comments and opinions for stakeholders is May 28, 2023.
Official sourceCyber Security
Tanzania
3/28/2023
Tanzania TBS Prepares Draft Standard DTZS EDC4 (1929) - Security Assurance Components for Information Security, Cybersecurity and Privacy Protection
On March 28, 2023, the Tanzania Bureau of Standards (TBS) prepared draft DTZS EDC4 (1929) standard in reference to ISO/IEC 15408-3:2022 for security assurance components of evaluation criteria for IT security.
The final date for submission of comments and opinions for stakeholders is May 28, 2023.
Official sourceCyber Security
Malaysia
4/18/2023
Malaysia MCMC Opens Public Consultation on 5 Security Technical Codes
On April 18, 2023, the Malaysian Communications and Multimedia Commission (MCMC) opened a public consultation on 5 technical codes as follows:
• Internet Protocol version 6 (IPv6) – Security Requirements
• Internet of Things – Device Security Requirements
• Information Security Management – Incident Management (First Revision)
• Information Security Management – Requirements (Second Revision)
• Fixed Network Facilities – In-Building and External (First Revision).
Comments are accepted until May 17, 2023.
Please contact your local UL Solutions office for more information.Electrical and Electronic Waste, Sustainability
South Africa
3/23/2023
South Africa DFFE Publishes Extended Producer Responsibility Scheme for Portable Battery Sector
On March 23, 2023, the Department of Forestry, Fisheries and the Environment (DFFE) identified portable batteries as products for which extended producer responsibility measures will be implemented according to National Environmental Management: Waste Act, 2008.
These measures include:
- collection, transportation, storage of products in the post-consumer stage; and
- recycling and recovery obligations.
Official sourceElectrical and Electronic Waste, Sustainability
Hungary
3/14/2023
Hungary MOE Publishes Decree on Detailed Rules for the Functioning of Extended Producer Responsibility Scheme
On March 14, 2023, the Ministry of Energy published a decree on detailed requirements for circular products subject to extended producer responsibility, such as packaging, certain single-use plastic products, electrical and electronic equipment, batteries and accumulators and more.
The Decree entered into force on April 1, 2023.
Official source, Official sourceElectrical and Electronic Waste, Sustainability,
Ukraine
4/19/2023
Ukraine Notifies Law on Waste Management
On April 19, 2023, the Ministry of Environmental Protection and Natural Resources notified to the WTO the Law of Ukraine No. 2320-IX on Waste Management of 20.06.2022.
Official source, Official sourceEMC
Ecuador
3/24/2023
Ecuador INEN Opens Public Consultation on EMC Immunity Standards for General Lighting Equipment
On March 24, 2023, the Ecuadorian Standardization Service (INEN) opened a public consultation on Equipment for General Lighting Purposes – EMC Immunity Requirements (NTE INEN-IEC 61547) which sets out the electromagnetic immunity requirements for lighting equipment that falls within the scope and scope of IEC technical committee 34, which includes apparatus such as lamps, luminaires and modules.
Comments are accepted until May 23, 2023.
Official sourceEMC
China
4/4/2023
China CQC Issues Notice on the Implementation of the New EMC Standard GB 17625.1-2022 for CCC Certification of Electronic Products and Safety Accessories, Lighting Appliances, Household and Similar Equipment
On April 4, 2023, the China Quality Certification Center (CQC) issued a notice on relevant requirements of implementing new version of standards GB 17625.1-2022 for Compulsory Product Certification of electronic products and safety accessories, lighting appliances, household and similar equipment in accordance with the Certification Implementation of GB 17625.1-2022 Version Upgrades Technical Resolution by TC10 Technical Expert Group of the Certification and Accreditation Administration China (CNCA).
Official sourceEMC
EU
4/7/2023
European Union CENELEC Publishes New Standard EN IEC 61547:2023 - Equipment for General Lighting Purposes
On April 7, 2023, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61547:2023 for EMC immunity requirements of equipment for general lighting purposes.
Date of withdrawal of superseded version is on March 8, 2026.
Official sourceEMC
EAEU
3/14/2023
EAC EEC Publishes Updated List of Products HS Codes Subject to Mandatory Certification According to EMC Technical Regulation
On March 14, 2023, the Eurasian Economic Commission (EEC) published Decision No. 28, which amends the list of equipment and reference HS codes subject to mandatory certification according to TR CU 020/2011 on Electromagnetic Compatibility of Technical Means (EMC).
The list is aligned with the amendment to TR CU 020/2011 already published and implemented (EEC Decision no. 91 of June 2022).
Please contact your local UL Solutions office for more information.EMC, Energy Efficiency, RoHS, Safety, Wireless, Chemicals
Serbia
3/3/2023
Serbian Government Issues Regulation on Notification of Conformity
Assessment Bodies
On March 3, 2023, the Government of the Republic of Serbia issued Regulation on Notification of Conformity Assessment Bodies to harmonize with the European Union's legislation, effective March 11, 2023.
Official source, Official sourceEMC, Energy Efficiency, RoHS, Safety, Wireless, Chemicals, Cyber Security, Explosive Atmospheres, F Gas, Noise, Performance, Electrical and Electronic Waste, REACH, Sustainability, Sanitation, Water Efficiency
Serbia
1/20/2023
Serbian Government Issues Regulation on Special Requirements for Accredited Bodies in the Composition of Producers
On January 20, 2023, the Government of the Republic of Serbia issued Regulation on Special Requirements for Accredited Bodies in the Composition of Producers to harmonize with the European Union's legislation, effective January 28, 2023.
Official sourceEMC, Energy Efficiency, RoHS, Safety, Wireless, Chemicals, Cyber Security, Explosive Atmospheres, F Gas, Noise, Performance, REACH, Electrical and Electronic Waste, Sustainability, Sanitation, Water Efficiency
Serbia
3/10/2023
Serbian Government Issues Regulation on the Method of Recognition of Foreign Conformity Documents
On March 10, 2023, the Government of the Republic of Serbia issued Regulation on the Method of Recognition of Foreign Conformity Documents to ensure the free flow of goods and remove technical barriers in trade, effective March 18, 2023.
Official source, Official sourceEMC, Performance, Safety
India
3/29/2023
India TEC Notifies Non-Applicability of Certain Testing Parameters for IP Multimedia Conferencing Equipment, LAN Switch and IoT Gateway
On March 29, 2023, the Telecommunication Engineering Centre (TEC) published Notification No. 5-3/2021-TC/TEC (Pt.) specifying the non-applicability of certain test parameters pertaining to Essential Requirements (ER) for IP Multimedia Conferencing Equipment, LAN Switch and IoT Gateway under Mandatory Testing and Certification of Telecommunication Equipment (MTCTE) scheme.
Official source, Official sourceEMC, Performance, Safety
India
4/13/2023
India TEC Defines Criteria for Family/Associated Models of Optical Fiber Cable (OFC) under MTCTE Scheme
On April 13, 2023, the Telecommunication Engineering Centre (TEC) published Notification No. 6-6/2021-TC/TEC regarding the clarification on submission of Family or Associated Models of Optical Fiber Cable (OFC) under Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.
Official source, Official sourceEMC, Performance, Safety, Wireless
India
4/5/2023
India TEC Issues Interim Exemption to Certain Test Parameters of Session Border Controller under MTCTE
On April 5, 2023, the Telecommunication Engineering Centre (TEC) published Notification No. 5-5/2021-TC/TEC regarding the interim exemption of certain test parameters of Session Border Controller under Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.
Official source, Official sourceEMC, Performance, Safety, Wireless
India
4/18/2023
India TEC Defines Criteria for Certification of Routers, LAN Switches and DWDM Equipment Having Specialized Test Requirements Under MTCTE Scheme
On April 18, 2023, the Telecommunication Engineering Centre (TEC), published Notification No. 6-6/2021-TC/TEC (Pt II) regarding the criteria for certification of Routers, LAN switches, and DWDM equipment having specialized test requirements under Mandatory Testing and Certification of Telecom Equipment (MTCTE) scheme.
Official source, Official sourceEMC, Safety
Vietnam
12/30/2022
Vietnam MOST Issues Latest List of Group-2 Products and Goods for CR Mark Certification
On December 30, 2022, the Ministry of Science and Technology (MOST) issued Decision No. 2711/QD-BKHCN on the announcement of group-2 products and goods under their management responsibility, in accordance with the most recent policies and regulations on product and goods quality.
Official sourceEMC, Safety
GCC
4/4/2023
The GCC 5th Open Day for Economic Operators Organized by GSO
GCC Standardization Organization (GSO) is organizing a workshop for all economic operators to discuss the benefits and challenges of GSO Low Voltage Regulation.
Event details:
• The GCC 5th Open Day for Economic Operators
• May 23, 2023 (Tuesday), 9:00am to 13:00pm KSA time (+3 GMT)
• Hybrid meeting format online and face-to-face in Riyadh
To register please use this link: The 5th GSO-Economic Operators Meeting (Registration Form)Please contact your local UL Solutions office for more information.
EMC, Safety
Japan
12/28/2022
Japan METI Revises Technical Standards Applicable to Lithium-Ion Storage Batteries
On December 28, 2022, the Ministry of Economy, Trade and Industry (METI) published a partial revision of Interpretation of the Ministerial Ordinance that Stipulates Technical Standards for Electrical Appliances (20130605 Commercial Bureau No. 3) and Examination Criteria for Dispositions by the Minister of Economy, Trade and Industry Based on the Electrical Appliance and Material Safety Law, etc. (20131220 Sho No. 27).
Official source, Official source, Official sourceEMC, Safety, Wireless
Uzbekistan
2/28/2023
Uzbekistan Cabinet of Ministers Publishes New Law on Accreditation of Conformity Assessment Bodies
On February 28, 2023, the Cabinet of Ministers published Law of the Republic of Uzbekistan on Accreditation of Conformity Assessment Bodies to ensure the implementation of a unified state policy in the field of accreditation, effective August 29, 2023.
Official sourceEMC, Safety, Wireless, Cyber Security, Energy Efficiency, Explosive Atmospheres, Electrical and Electronic Waste
Uzbekistan
2/28/2023
Uzbekistan Publishes New Law on Technical Regulation
On February 28, 2023, the Cabinet of Ministers of the Republic of Uzbekistan published a new law about technical regulation to align with the international requirements, effective August 29, 2023.
Official sourceEMC, Wireless
South Korea
4/3/2023
South Korea RRA Publishes Revised Conformity Assessment of Broadcasting and Communication Equipment
On April 3, 2023, the South Korean National Radio Research Agency (RRA) published National Radio Research Agency Notification No. 2023-5, 2023, 4.3 partially revising the Notice on Conformity Assessment of Broadcasting and Communications Equipment, etc.
Official source, Official sourceEnergy Efficiency
USA
3/24/2023
USA DOE Publishes Final Rule for the Test Procedure of Commercial and Industrial Pumps
On March 24, 2023, the US Department of Energy (DOE) published final rule for the test procedure of commercial and industrial pumps.
The effective date of this rule is April 24, 2023. The amendments will be mandatory for product testing starting September 20, 2023.
Official sourceEnergy Efficiency
USA
3/30/2023
USA DOE Publishes Final Rule for the Energy Conservation Standards for Variable Refrigerant Flow Multi-Split Air Conditioners and Heat Pumps
On March 30, 2023, the US Department of Energy (DOE) published final rule for the energy conservation standards of variable refrigerant flow multi-split air conditioners and heat pumps.
Official source, Official sourceEnergy Efficiency
India
3/31/2023
India BEE Launches Star Labelling Program for Induction Hobs Under Voluntary Regime
On March 31, 2023, the Bureau of Energy Efficiency (BEE) published important instructions regarding launch of Star Labelling Program for induction hobs under voluntary regime.
Official sourceEnergy Efficiency
India
3/31/2023
India BEE Releases Instructions Regarding BEE Star Labelling Program for Side by Side Refrigerator/Multidoor Refrigerator
On March 31, 2023, the Bureau of Energy Efficiency (BEE) published important instructions regarding Star Labelling Program for side by side refrigerator/multidoor refrigerator.
Official sourceEnergy Efficiency
India
3/31/2023
India BEE Launches Star Labelling Program for Table Fan and Wall Mounted Fan on Voluntary Basis
On March 31, 2023, the Bureau of Energy Efficiency (BEE) published instructions to all manufacturers of table fan and wall mounted fan regarding applicability of Star Labelling Program on voluntary basis.
Official sourceEnergy Efficiency
India
3/31/2023
India BEE Launches Star Labelling Program for Pedestal Fans on Voluntary Basis
On March 31, 2023, the Bureau of Energy Efficiency (BEE) published instructions to all manufacturers of pedestal fans regarding applicability of voluntary regime of Star Labelling Program.
Official sourceEnergy Efficiency
India
3/31/2023
India BEE Releases Important Instructions to All Manufacturers and Star Labelling Permitees of Deep Freezer
On March 31, 2023, the Bureau of Energy Efficiency (BEE) published important instructions to all manufacturers and permitees of deep freezer regarding implementation of mandatory regime with effect from July 1, 2023.
Official sourceEnergy Efficiency
India
3/31/2023
India BEE Releases Important Instructions to All Manufacturers and Star Labelling Permitees of Light Commercial Air Conditioner (LCAC)
On March 31, 2023, the Bureau of Energy Efficiency (BEE) published important instructions to all manufacturers permitees of Light Commercial Air Conditioner (LCAC) regarding changeover to mandatory Star Labelling regime with effect from July 1, 2023.
Official sourceEnergy Efficiency
Costa Rica
4/4/2023
UL Mexico CO Accreditation Update for New Refrigeration Standards of Costa Rica
UL Mexico was given an approval to carry out activities of evaluation of conformity for the latest standard for refrigeration products in Costa Rica. The updated standards are INTE E11-1: 2021, INTE E11-2: 2021 Amendment 1 from 2022 and INTE E11-3: 2021.
Please contact your local UL Solutions office for more information.Energy Efficiency
USA
3/31/2023
USA DOE Publishes Proposed Rule for the Energy Conservation Standard of Miscellaneous Refrigeration Products
On March 31, 2023, the U.S. Department of Energy (DOE) published proposed rule for the energy conservation standard of miscellaneous refrigeration products.
DOE will accept comments, data, and information regarding this NOPR until May 30, 2023.
Official sourceEnergy Efficiency
Hong Kong
3/17/2023
Hong Kong EMSD Issues Mandatory Energy Efficiency Labelling Scheme (MEELS) for LED Lamps, Gas Cookers, and Gas Instantaneous Water Heaters
On March 17, 2023, the Electrical and Mechanical Services Department (ESMD) of the Environment and Ecology Bureau (EBB) issued Energy Efficiency (Labelling of Products) Ordinance (Amendment of Schedules 1 and 2) Order 2023, approving the fourth phase of the Mandatory Energy Efficiency Labelling Scheme (MEELS) by extending the scope to Light Emitting Diode (LED) lamps, gas cookers and gas instantaneous water heaters. This Order comes into operation on a day to be appointed by the Secretary for Environment and Ecology by notice published in the Gazette.
Official sourceEnergy Efficiency
USA
4/10/2023
U.S.A. DOE Publishes Final Rule for the Test Procedure of Ceiling Fan Light Kits
On April 10, 2023, the U.S. Department of Energy (DOE) published final rule for the energy test procedure for ceiling fan light kits.
Official sourceEnergy Efficiency
India
4/11/2023
India BEE Releases Instructions Regarding Changeover to Mandatory Regime of Star Labelling for Ultra-High Definition (UHD) Televisions
On April 11, 2023, the Bureau of Energy Efficiency (BEE) published important instructions to all manufacturers and permitees of Ultra-High Definition (UHD) televisions regarding implementation of mandatory regime of Star Labelling with effect from July 1, 2023.
Official sourceEnergy Efficiency
India
4/13/2023
India BEE Releases Instructions to All Manufacturers of Air Compressors
On April 13, 2023, the Bureau of Energy Efficiency (BEE) published instructions to all manufacturers of air compressors regarding voluntary regime of Star Labelling.
Official sourceEnergy Efficiency
India
4/13/2023
India BEE Releases Important Instructions to All Manufacturers and Permitees of Star Labelling for Light Commercial Air Conditioner (LCAC)
On April 13, 2023, the Bureau of Energy Efficiency (BEE) published important instructions to all manufacturers and permitees of Light Commercial Air Conditioner (LCAC) pertaining to changeover to mandatory regime of Star Labelling with effect from July 1, 2023.
Official sourceEnergy Efficiency
USA
4/11/2023
USA DOE Publishes Final Rule for the Test Procedure for Computer Room Air Conditioners
On April 11, 2023, the U.S. Department of Energy (DOE) published the final rule for the energy test procedure of computer room air conditioners.
Official sourceEnergy Efficiency
Tunisia
4/7/2023
Tunisia MIME Issues Order for the Amendment of Energy Efficiency Labeling of Air Conditioners
On April 7, 2023, the Ministry of Industry, Mines and Energy (MIME) and the Ministry of Trade and Export Development (MTED) published in the Official Journal of the Republic of Tunisia (JORT) No. 035 the Order of March 23, 2023, regarding the amendment of the energy efficiency labeling of individual air conditioning units with a cooling capacity of less than 12 KW, effective on the same date.
Official sourceEnergy Efficiency
USA
4/11/2023
U.S.A. DOE Publishes Direct Final Rule for the Energy Conservation Standards for Air Cleaners
On April 11, 2023, the U.S. Department of Energy (DOE) published a final rule for the energy test conservation standards for air cleaners.
Official sourceEnergy Efficiency
Uruguay
4/18/2023
Uruguay MIEM Approves Decree on Energy Efficiency for EV
On April 18, 2023, the Ministry of Industry, Energy and Mining (MIEM) announced the adoption and publication of decree on energy efficiency through World Trade Organization (WTO) website.
Official source, Official source, Official sourceEnergy Efficiency
Serbia
3/17/2023
Serbian Government Issues Regulation on Energy Labeling of Products
On March 17, 2023, the Government of the Republic of Serbia issued a regulation on energy labeling of products that affect energy consumption, which included the requirement for a QR code. This regulation became effective on March 25, 2023 and will apply as of May 1, 2023.
Official source, Official sourceEnergy Efficiency
USA
3/13/2023
U.S.A. DOE Publishes Direct Final Rule for the Test Procedure for Consumer Boilers
On March 13, 2023, the U.S. Department of Energy (DOE) published a final rule for the energy test procedure for consumer boilers.
Official sourceEnergy Efficiency
USA
4/21/2023
USA DOE Publishes Correction on the Final Rule of the Test Procedure for Commercial and Industrial Pumps
On April 21, 2023, the US Department of Energy (DOE) published a correction on the final rule published last March 24, 2023 in the Federal Register regarding the test procedure for commercial and industrial pumps.
Official sourceEnergy Efficiency, Noise
Tunisia
4/7/2023
Tunisia MIME Issues New Energy Efficiency Requirements for Domestic Electric Ovens
On April 7, 2023, the Ministry of Industry, Mines and Energy (MIME) and the Ministry of Trade and Export Development (MTED) published in the Official Journal of the Republic of Tunisia (JORT) No. 035 the Order of March 23, 2023, about the new energy labeling requirements for domestic electric ovens. This Order comes into force 3 months from the date of its publication, that is July 7, 2023.
Official sourceEnergy Efficiency, Performance
Saudi Arabia
3/29/2023
Saudi Arabia SASO Informs Stakeholders to Adhere to The Revised Technical Requirements of Air-conditioners - Minimum Energy Performance, Labelling and Testing Requirements
On March 29, 2023, the Saudi Standards, Metrology and Quality Organization (SASO) circulated an announcement to stakeholders to adhere to the revised technical requirements of SASO 2663:2021 / AMD1:2023 for minimum energy performance, labelling and testing requirements for low capacity window type and single-split type air conditioners.
Please contact your local UL Solutions office for more information.Energy Efficiency, Performance
EU
4/18/2023
European Union EC Publishes Ecodesign Requirements for Electrical and Electronic Household and Office Equipment
On April 18, 2023, the European Commission (EC) released Commission Regulation (EU) 2023/826 of April 17, 2023, laying down ecodesign requirements for off mode, standby mode, and networked standby energy consumption of electrical and electronic household and office equipment pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulations (EC) No 1275/2008 and (EC) No 107/2009.
This Regulation establishes ecodesign requirements in the light of technological progress continued and improved requirements, adapted to technological progress, regarding the energy consumpt
