最新の規制情報をご覧ください
毎月更新される本ページでは、世界各国の最新の規制情報や安全性に関する最新情報を掲載し、豊富な情報をお届けすることでお客様のニーズにお応えします。安全、エネルギー効率、ワイヤレス、EMCなど、お客様の業界に関連する様々な規制を取り上げています。
世界の規制に関するUL Solutions の専門知識を活用し、ターゲット市場への迅速な参入や継続的な市場参入を実現してください。詳細については、こちらからまたは弊社GMA担当者にお問合せください。
Previous updates
- October 2024 updates
Regulation
Country
Summary
Hardlines Canada Health Canada Publishes SOR/2024-217 Tents Regulations
On November 20, Health Canada has published SOR/2024-217 Tents Regulations to update the flammability and fire-safety labelling requirements in the Tents Regulations.
This Regulation specifies contemporary requirements set out in the Canadian General Standards Board standard CAN/CGSB-182.1-2020 Flammability and Labelling Requirements for Tents.
As part of the Regulations, the Toys Regulations have been amended to add flammability performance and fire-safety labelling requirements to continue regulating children’s play tents not intended to be used as outdoor shelters. Finally, the Textile Flammability Regulations have also been amended to exclude products that are regulated under the amended Toys Regulations.Chemicals European Union ECHA and Five European Countries Issues Progress Update on PFAS Restriction
On November 20, the European Chemicals Agency (ECHA) and authorities from Denmark, Germany, the Netherlands, Norway and Sweden have released a progress update on the process to restrict per- and polyfluoroalkyl substances (PFAS) in Europe.
The five authorities (Dossier Submitters) and ECHA’s scientific committees for Risk Assessment (RAC) and for Socio-Economic Analysis (SEAC) are evaluating over 5,600 scientific and technical comments from third parties during the 2023 consultation.
This input helps update PFAS information, identify unnamed uses, and evaluate alternative restriction options.
The proportionality of each alternative option will be evaluated and compared to the initial two restriction options of a full ban or a ban with time-limited derogations. All this updated information is feeding into ECHA committees’ ongoing evaluation of the proposal.Consumer Products USA U.S. CPSC Sets to Finalize Rule to Revise 16 C.F.R. part 1110, Certificates of Compliance and to Implement eFiling of Certificates for Regulated, Imported Consumer Products
The U.S. Consumer Product Safety Commission (CPSC) is set to finalize rule to revise 16 C.F.R. part 1110, Certificates of Compliance and to Implement eFiling of Certificates for Regulated, Imported Consumer Products.
The draft Final Rule standardizes the certificates and implements electronic filing (eFiling) of the certificate data with U.S. Customs and Border Protection (CBP) for imported, Commission-regulated finished products and substances.
The Final Rule applies to importers, domestic manufacturers, and private labelers who are required to issue certificates for consumer products and substances regulated by CPSC that are imported for consumption or warehousing into the United States or are distributed in commerce in the United States.
A decisional meeting for this matter is scheduled on December 18, 2024Toys European Union European Union Publishes Updated Guidance Documents On the Application of Directive 2009/48/EC on the Safety of Toys for Craft Kits and also for Decorative Objects & Products for Collectors.
The European Commission has published updated guidance documents on the application of Directive 2009/48/EC on the Safety of Toys for craft kits and also for decorative objects & products for collectors.
Guidance Document No 13
Guidance document No 13 is intended to help to differentiate between craft kits with play value which should be considered as toys and craft kits for children which should be considered as products covered by the General Product Safety Directive 2001/95/EC (GPSD) or the Regulation (EU) 2023/988 on general product safety (GPSR), which shall apply from 13 December 2024.
Guidance No. 20
Guidance document No 20 is intended to help to classify decorative objects for festivities and celebrations, and products for collectors as toys or not toys.Artificial Intelligence
Singapore, Rwanda
Singapore IMDA and Rwanda MINICT Publish AI Playbook for Small States
On September 22, 2024, the Infocomm Media Development Authority (IMDA) and Rwanda Ministry of Information Communication Technology and Innovation (MINICT) published the AI Playbook for Small States.
Official sourceArtificial Intelligence
Malaysia
Malaysia MOSTI Publishes National Guidelines on AI Governance and Ethics
On September 24, 2024, the Ministry of Science, Technology and Innovation (MOSTI) of Malaysia published The National Guidelines on AI Governance and Ethics.
Official sourceArtificial Intelligence
Singapore
Singapore CSA Publishes Guidelines and Companion Guide on Securing AI Systems
On October 15, 2024, the Cyber Security Agency of Singapore (CSA) published the following documents:- Guidelines on Securing AI Systems
- Companion Guide on Securing AI Systems
Chemicals
EU
European Union EC Publishes POP Amending Regulation Adding Methoxychlor
On September 27, 2024, the European Commission (EC) published Commission Delegated Regulation (EU) 2024/2570 in the Official Journal of the European Union. This amends Regulation (EU) 2019/1021 of the European Parliament and of the Council as regards to methoxychlor.
The Regulation entered into force on October 17, 2024.
Official sourceChemicals
EU
European Union EC Publishes POP Amending Regulation Regarding Hexabromocyclododecane
On September 27, 2024, the European Commission (EC) published (EU) 2024/2555 in the Official Journal of the European Union. This amends Regulation (EU) 2019/1021 of the European Parliament and of the Council as regards to hexabromocyclododecane.
The Regulation entered into force on October 17, 2024.
Official sourceChemicals
Australia
Australia DCCEEW Opens Consultation on IChEMS Proposed Standards for Internationally Recognized Chemicals of Concern
On September 27, 2024, the Australia Department of Climate Change, Energy, the Environment and Water (DCCEEW) invited public comments on proposed standards for three chemicals of high concern, two chemicals of lower concern, and proposed variations on four existing standards.
The deadline for feedback was October 25, 2024.
Official sourceChemicals
Australia
Australian DHAC Seeks Comments for Eight Draft Evaluation Statements on Chemical Safety Information
On October 3, 2024, the Australian Department of Health and Aged Care (DHAC) called for feedback on eight draft evaluation statements that cover 1,100 chemicals and offer safety information on the use, importation, or production of industrial chemicals.
The feedback period is open until November 29, 2024.
Official sourceChemicals
U.S.
U.S. EPA Publishes Notice of Data Availability Relevant to Data Reported Under the American Innovation and Manufacturing Act of 2020
On October 7, 2024, the U.S. Environmental Protection Agency (EPA) published the Notice of Data Availability Relevant to Data Reported Under the American Innovation and Manufacturing Act of 2020. This information comes from the 2023 mandatory reporting under Part 84, supporting the HFC phasedown of the American Innovation and Manufacturing (AIM) Act of 2020, including HFC allowance U.S.ge by entities.
Official sourceChemicals
Canada
Canadian Government Publishes Risk Management of Chemical Substances
On October 4, 2024, the Government of Canada published Risk Management of Chemical Substances. This describes the implementation of the Canadian Pollution Prevention Program (CMP) to control chemical substance use, storage and disposal, focusing on reducing environmental and human health risks through risk assessment, risk management instruments and performance measurement evaluation.
Official sourceChemicals
U.S.
U.S. EPA Publishes Rule on Addition of Certain Per- and Polyfluoroalkyl Substances (PFAS) to the Toxics Release Inventory (TRI)
On October 8, 2024, the U.S. Environmental Protection Agency (EPA) published a proposed rule on the Addition of certain Per- and Polyfluoroalkyl Substances (PFAS) to the Toxics Release Inventory (TRI). This is a list of toxic chemicals subject to reporting under the Emergency Planning and Community Right-to-Know Act (EPCRA) and the Pollution Prevention Act (PPA) to comply with the National Defense Authorization Act for Fiscal Year 2020 (NDAA).
Comments must be received on or before December 9, 2024.
Official sourceChemicals
U.S.
U.S. EPA Publishes Notice on Tris(2-Chloroethyl) Phosphate (TCEP) Risk Evaluation Under the Toxic Substances Control Act (TSCA)
On September 26, 2024, the U.S. Environmental Protection Agency (EPA) published Tris(2-chloroethyl) Phosphate (TCEP); Risk Evaluation Under the Toxic Substances Control Act (TSCA); Notice of Availability. The purpose of risk evaluations under TSCA is to assess whether a chemical substance poses an unreasonable risk to human health or the environment. Under TSCA, the EPA must initiate risk management actions to address this final evaluation.
Official sourceChemicals
U.S.
U.S. EPA Extends the Enforcement Statement Regarding DecaBDE-Containing Wire and Cable Insulation in Nuclear Power Generation Facilities
On September 27, 2024, the U.S. Environmental Protection Agency (EPA) published the Extension to Enforcement Statement Regarding the Prohibition of Processing and Distribution in Commerce of Decabromodiphenyl Ether (DecaBDE)-Containing Wire and Cable Insulation in Nuclear Power Generation Facilities under 40 C.F.R. §751.405(a)(2)(ii). This temporary statement indicates that it won't pursue violations of the DecaBDE prohibition for nuclear power plants, effective January 6, 2023, as long as involved entities are actively working to qualify alternative components per U.S. Nuclear Regulatory Commission (NRC) regulations.
Official sourceChemicals
Canada
Canadian ECCC Seeks Feedback for the Proposed Plan of Priorities for Management of Substances
On October 5, 2024, the Environment and Climate Change Canada (ECCC) and Health Canada requested feedback regarding the Proposed Plan of Priorities for Substances Management. An integrated multi-year plan is being developed for Canada's substance assessment, and additional actions are being established to enhance substance management.
The feedback period is until December 4, 2024.
Official sourceChemicals
Japan
Japan MHLW Publishes Draft Ministerial Ordinance Specifying PFOA-Related Substances as Class I Chemical Substances
On September 9, 2024, the Japan Ministry of Health, Labor and Welfare (MHLW), Ministry of Economy, Trade and Industry (METI) and Ministry of the Environment (MOE), solicited opinions regarding the draft ordinance specifying perfluoroalkanoic acids (limited to those with a branched structure and eight carbon atoms) or their salts, and perfluorooctanoic acid (PFOA) related substances as Class I Specified Chemical Substances under the Act on the Examination of Chemical Substances and Regulation of Their Manufacture, etc. (Act No. 117 of 1973).
The public consultation ended on October 9, 2024.
Please contact your local UL Solutions office for more information.Chemicals
China
China MEE Announces the Control Requirements for Eight Mercury-Added Products and Dental Amalgam
On October 14, 2024, the Ministry of Ecology and Environment (MEE), along with 16 other ministries, announced the control requirements for eight types of mercury-added products such as mercury vacuum pumps and dental amalgam through Announcement No. 21 of 2024.
The production, import and export of the specified mercury-added products will be prohibited beginning January 1, 2026.
Official sourceChemicals
Lithuania
Lithuania SCRPA Publishes Order Regarding Authorized Chemicals for Use in Electronic Cigarettes Liquid Fillers and Fragrance
On October 15, 2024, the Lithuania State Consumer Rights Protection Authority (SCRPA) published an Order regarding chemicals permitted for use in the Republic of Lithuania by providers of electronic cigarettes and electronic cigarette liquid fillers that imitate the taste and smell of tobacco.
This Order entered into force on November 1, 2024.
Official sourceCybersecurity
Malaysia
Malaysia NACSA Publishes Instruction for Determination of National Critical Information Infrastructure Entities
On September 18, 2024, the National Cyber Security Agency (NACSA) of Malaysia published the Determination of National Critical Information Infrastructure Entities (Instruction No. 3 Year 2024) under the Cyber Security Act 2024 (Act 854), which took effect on the same date.
Official sourceCybersecurity
EU
European Union CEN Publishes New Standards for Information Security, Cybersecurity and Privacy Protection
On September 25, 2024, the European Committee for Standardization (CEN) published the following standards:
1. CEN/CLC ISO/IEC/TS 23532-1:2024 - Information security, cybersecurity and privacy protection - Requirements for the competence of IT security testing and evaluation laboratories - Part 1: Evaluation for ISO/IEC 15408
2.CEN/CLC ISO/IEC/TS 23532-2:2024 - Information security, cybersecurity and privacy protection - Requirements for the competence of IT security testing and evaluation laboratories - Part 2: Testing for ISO/IEC 19790.
The documents complement the procedures and general requirements found in ISO/IEC 17025:2017.
Official sourceCybersecurity
EU
European Union EC Releases Draft Amendment to the Adoption of the European Common Criteria-Based Cybersecurity Certification Scheme (EUCC)
On September 20, 2024, the European Commission (EC) published a draft amending Implementing Regulation (EU) 2024/482, correcting the regulation as regards to applicable international standards. This document supports the European Common Criteria-based cybersecurity certification scheme (EUCC) with state-of-the-art documents that specify evaluation methods, techniques and tools that apply to the certification of ICT products or security requirements.
Comments were accepted until October 18, 2024.
Official sourceCybersecurity
EU
European Union EC Releases Draft Rules for Notifications of Conformity Assessment Bodies for the Cyber Security Act
On September 20, 2024, the European Commission (EC) published a draft Commission Implementing Regulation establishing the circumstances, formats and procedures for notifications of conformity assessment bodies by National Cybersecurity Certification Authorities (NCCAs). This Regulation is pursuant to Article 61(5) of Regulation (EU) 2019/881 of the European Parliament and of the Council on ENISA (the European Union Agency for Cybersecurity) and regards information on communications technology cybersecurity certification.
Comments were accepted until October 18, 2024.
Official sourceCybersecurity
EU
European Union CEN Publishes Standard on Information Security Management Systems Requirements
On September 11, 2024, the European Committee for Standardization (CEN) published EN ISO/IEC 27001:2023/A1:2024 - Information security, cybersecurity and privacy protection - Information security management systems - Requirements - Amendment 1: Climate action changes (ISO/IEC 27001:2022/Amd1:2024).
This modification adds a few additional clauses about incorporating climate change into the system.
Official sourceCybersecurity
Australia
Australia ACSC Releases New Cybersecurity Guidance for Operational Technology
On October 2, 2024, the Australian Signals Directorate’s Australian Cyber Security Centre (ACSC) released new guidance to help critical infrastructure organizations protect their systems and online supply chains. This supports the importance of designing robust cybersecurity measures for operational technology (OT) environments.
Official sourceCybersecurity
Malaysia
Malaysia NACSA Publishes Instructions for Cybersecurity Baseline Self-Assessment and Risk Assessment
On October 10, 2024, the National Cyber Security Agency (NACSA) of Malaysia published the following instructions under the Cyber Security Act 2024 (Act 854).
- National Cyber Security Baseline Self-Assessment (Instruction No. 4 Year 2024)
- Cyber Security Risk Assessment (Instruction No. 5 Year 2024).
These documents took effect on October 10, 2024.
Official sourceCybersecurity
Malaysia
Malaysia NACSA Publishes National Cybersecurity Baseline
On October 3, 2024, the National Cyber Security Agency (NACSA) of Malaysia published National Cyber Security Baseline (NCSB) Version 1.0 under the Cyber Security Act 2024 (Act 854).
Official sourceCybersecurity
Singapore
Singapore CSA Updates Publications Under Cybersecurity Labeling Scheme for IoT
On October 16, 2024, the Cyber Security Agency of Singapore (CSA) published the following documents:
- Cybersecurity Labelling Scheme for IoT Publication No. 4 Assessment Methodology Version 1.1 (CCC SP-151-4)
- Cybersecurity Labelling Scheme for IoT Publication No. 4A Assessment Methodology for Home Gateway Version 1.0 (CCC SP-151-4A).
Official sourceCybersecurity
Brazil
Brazil Anatel Opens Consultations for the Update on the Mandatory Minimum Cybersecurity Requirements for CPE
On October 15, 2024, the National Telecommunications Agency of Brazil (ANATEL) opened Consultation No. 50 on the Updated Weak Password Definition for CPE Certification Requirements. This modifies Act No. 2436, of March 7, 2023, after stakeholders identified a semantic error.
Comments were accepted until October 24, 2024.
Official sourceElectrical and Electronic Waste
United Kingdom
United Kingdom DEFRA Confirms New Legislation to Ban the Sale and Supply of Single-Use Vapes
On October 24, 2024, the Department for Environment, Food & Rural Affairs (DEFRA) confirmed a new legislation to ban the sale and supply of single-use vapes from June 1, 2025, has been laid in Parliament.
Official sourceEMC
Taiwan
Taiwan BSMI Publishes Updated List of Recognized EMC Testing Laboratories in Foreign Countries (October 7, 2024 Update)
On October 7, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) published the List of EMC Testing Laboratories Recognized by the BSMI in Foreign Countries, updating the previous version.
Official sourceEMC
Taiwan
Taiwan BSMI Publishes Updated List of Recognized EMC Testing Laboratories in Foreign Countries (October 15, 2024 Update)
On October 15, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) published the List of EMC Testing Laboratories Recognized by the BSMI in Foreign Countries, updating the previous version.
Official sourceEMC, Energy Efficiency, Safety
CB Scheme
IECEE Summary of Rules, Operational Documents and Guides Published from January to September 2024
The IECEE framework ensures clear guidelines and operational documents for all parties involved in electrotechnical equipment certification, thereby maintaining high global safety and compliance standards.
The summary of rules, operational documents and guides published from January 2024 to September 2024 can be accessed through the official IECEE website.
Official sourceEMC, Energy Efficiency, Safety
Israel
Israel MEI Publishes Amendment to Standards Law
On September 17, 2024, the Ministry of Economy and Industry (MEI) published an amendment to the Standards Law (File No. 11463) to remove the obligation to comply with the standard for SI 1049 - Household appliances that consume gas and electricity for baking, cooking and grilling, which was effective on the same day.
Official sourceEMC, Performance, Safety
CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 41 (2024-W41)
On October 11, 2024, new TRFs were published and added to the IECEE website.
Official sourceEMC, Performance, Safety
CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 42 (2024-W42)
On October 18, 2024, new TRFs were published and added to the IECEE website.
Official sourceEMC, Safety
Israel
Israel MEI Updates Director General's Directive 2.6 - Exemption for Goods Imported by Commercial Import
On September 9, 2024, the Ministry of Economy and Industry (MEI) updated the Director General's Directive 2.6 - Exemption for goods imported through commercial import. The purpose of this provision is to establish a uniform handling policy for requests for exemption under Section 2(c)(2) of the free import order as well as to regulate the handling procedures for these requests.
Updating General Director Directive 2.6, which operates pursuant to section 2(c)(2) of the Free Import Order, creates an additional assistance package for importers of goods from Import Group 1, and enables them to receive an exemption according to the grounds and conditions specified therein.
The updated directive is effective on September 1, 2024.
Official sourceEMC, Safety
China
China CQC Issues Notice on the Revised Standards for Household Power Adapters, Chargers and Power Supplies
On October 12, 2024, the China Quality Certification Centre (CQC) issued a notice to implement the new version of standards GB/T 4706.1-2024 and GB 4343.1-2024 for CQC voluntary certification (Product Category 002022) for external power adapters, chargers and built-in switching power supplies for household and similar electrical appliances. This notice is a guideline for the enterprise to apply for the new CQC certificate and a conversion for the old CQC certificate during the transition period.
Official sourceEMC, Safety
EAEU
EAEU EEC Publishes Decision on Harmonized System Code for LCD TV
On October 3, 2024, the Board of Eurasian Economic Commission (EEC) published the decision of the EEC Board No. 111 on the classification of LCD TV in accordance with the Unified Commodity Nomenclature of Foreign Economic Activity of the Eurasian Economic Union. Under this Decision, LCD TVs are classified in subheading 8528 72 200 1 of the uniform heading nomenclature of foreign economic union.
This Decision took effect on November 7, 2024.
Official sourceEMC, Safety, Performance
Global, CB Scheme
IECEE Includes New Standards in the System for September 2024
In September 2024, new standards were included in the IECEE System.
Official sourceEMC, Safety, Wireless
Pakistan
Pakistan PTA Publishes WLAN Framework
On September 24, 2024, the Pakistan Telecommunication Authority (PTA) published the Framework for Wireless Local Area Network - 2024.
Official sourceEMC, Safety, Wireless, Sustainability, Cyber Security
United Kingdom
United Kingdom DBT Calls for Evidence on Common Charger for Electrical Devices
On October 9, 2024, the Department for Business and Trade (DBT) of the United Kingdom opened a call for evidence on having a common charger for mobile phones and other portable electrical and electronic devices.
The Department is keen to hear views from the following:- Trade Associations
- Manufacturers
- Importers
- Distributors
- Consumers
This call for evidence will close at 11:59pm on December 4, 2024. Responses may be sent in three ways:- Through Email at: commonchargercfe@businessandtrade.gov.uk
- Through this online form
- Or by writing to:
Common Charger Call for Evidence
Office for Product Safety and Standards
1st Floor Caxton House
Tothill Street
London
SW1H 9NA
Official sourceEnergy Efficiency
U.S.
U.S. EPA Releases Public Notice on the Final Recognition Criteria for Energy Star Most Efficient 2025
On September 23, 2024, the U.S. Environmental Protection Agency (EPA) announced the final recognition criteria for ENERGY STAR Most Efficient 2025.
Starting January 1, 2025, ENERGY STAR-certified products meeting specific requirements will be highlighted as ENERGY STAR Most Efficient 2025 on www.energystar.gov/mostefficient.
Official sourceEnergy Efficiency
Chile
Chile Ministry of Energy Publishes Final Technical Specification for Refrigeration Appliances
On September 4, 2024, the Chilean Ministry of Energy approved Resolution 35, which outlines the final technical specifications for energy efficiency of domestic refrigeration appliances, and establishes the corresponding energy efficiency label.
Official sourceEnergy Efficiency;
Israel
Israel MEI Publishes Amendment to the Free Import Order
On September 18, 2024, Isreal’s Ministry of Economy and Industry (MEI) published an amendment to the free import order (file no. 2130) in relation to microwaves, digital converters and televisions.
Official sourceEnergy Efficiency
Mexico
Mexico SE Publishes Draft Energy Efficiency Standard for Central, Packaged or Split-Type Air Conditioners
On September 6, 2024, the Mexico Secretary of Economy (SE) published the draft Mexican official standard PROY-NOM-011-ENER-2024. This standard deals with energy efficiency limits, test methods and labeling of central, package or split-type air conditioners.
Comments were submitted until November 5, 2024.
Official sourceEnergy Efficiency
Mexico
Mexico SE Publishes Draft Energy Efficiency Standard for Motor Pumps and Motor Pump Sets
On September 5, 2024, the Mexico Secretary of Economy (SE) published the draft Mexican official standard PROY-NOM004ENER2024. This standard deals with energy efficiency limits, test methods and labeling of motor pumps and motor pump sets for clean water, in powers from 0.149 kW (1/5 HP) to 1.492 kW (2 HP).
Comments were submitted until November 4, 2024.
Official sourceEnergy Efficiency
Saudi Arabia
Saudi Arabia SASO Circulates Revision to Draft Standard for Large Capacity Air Conditioners
On September 26, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) circulated a revision to draft standard SASO 2874 for large-capacity air conditioners – performance requirements and methods of testing.
This is an update to the previous notification.
Official sourceEnergy Efficiency
U.S.
U.S. EPA Releases Public Notice Regarding the Clarification Memo of the Energy Star of Computer Servers SERT V2.0.8
On September 25, 2024, the U.S. Environmental Protection Agency (EPA) released a clarification memo regarding the update to the Standard Performance Evaluation Corporation (SPEC) Server Efficiency Rating Tool (SERT).
Official sourceEnergy Efficiency
United Arab Emirates
UAE MoIAT Circulates Draft Standard for Energy Efficiency Label for Vacuum Cleaners
On October 2, 2024, the Ministry of Industry and Advanced Technology (MoIAT) circulated the draft standard UAE.S 5010-9:202x for the Energy Efficiency label for vacuum cleaners. This standard applies to household electric mains-operated vacuum cleaners, including hybrid vacuum cleaners.
Comments and feedback for this new draft standard were submitted until October 24, 2024.
Official sourceEnergy Efficiency
U.S.
U.S. EPA Releases Public Notice for the Energy Star Laboratory Grade Refrigerator and FreezerVersion 2.0 Final Specification
On October 1, 2024, the U.S. Environmental Protection Agency (EPA) released the Final Version 2.0 ENERGY STAR Laboratory Grade Refrigeration and Freezers Specification.
These Version 2.0 requirements will take effect on June 30, 2025.
Official sourceEnergy Efficiency
India
India BEE Releases Draft Regulation on Labels for Refrigerators
On September 26, 2024, the Bureau of Energy Efficiency (BEE) released an advisory regarding the pre-published amendment regulation for refrigerators.
Comments and feedback were accepted until October 19, 2024.
Official sourceEnergy Efficiency
India
India BEE Issues Advisory on QR Code Implementation of Self-Ballasted LED Lamp
On September 25, 2024, the Bureau of Energy Efficiency (BEE) issued an advisory for manufacturers and permittees of self-ballasted LED lamps regarding the implementation of a QR Code on the product, under the Standards and Labeling (S&L) program which will be mandatory on January 1, 2025.
Official sourceEnergy Efficiency
U.S.
U.S. DOE Publishes Direct Final Rule for the Energy Conservation Standards for Miscellaneous Refrigeration Products
On September 30, 2024, the U.S. Department of Energy (DOE) published a direct final rule for the energy conservation standards for miscellaneous refrigeration products. It also corrects an error in the amended regulatory text as it appeared in the direct final rule published on May 7, 2024.
The technical correction in this document was effective September 30, 2024. The direct final rule implementing energy conservation standards became effective on September 4, 2024.
Official sourceEnergy Efficiency
South Korea
South Korea MOTIE Publishes Revision to Regulations on the Promotion of High-Efficiency Energy Equipment Distribution
On September 30, 2024, the Ministry of Trade, Industry and Energy (MOTIE) of South Korea published a partial revision of the Regulations on the Promotion of High-Efficiency Energy Equipment Distribution through Notice No. 2024-153. This revision took effect from the date of publication.
Official sourceEnergy Efficiency
U.S.
U.S. DOE Publishes Final Rule for the Energy Conservation Standards for Air-Cooled Commercial Package Air Conditioners and Heat Pumps
On September 30, 2024, the U.S. Department of Energy (DOE) published a direct final rule for the energy conservation standards for air-cooled commercial package air conditioners and heat pumps.
The effective date of September 17, 2024, for the direct final rule published on May 20, 2024 (89 FR 44052), is confirmed. Compliance with the standard established in the direct final rule will be required on and after January 1, 2029.
Official sourceEnergy Efficiency
Egypt
Egyptian EOS Publishes Draft Standard for Pump System Energy Assessment
On October 9, 2024, the Egyptian Organization for Standardization and Quality (EOS) published a draft standard for the energy assessment of pump systems.
The comment period for this standard will end on December 8, 2024.
Official sourceEnergy Efficiency
Israel
Israel’s MoE Releases European Regulation Updates for Energy Efficiency in Standby Mode
On September 19, 2024, the Ministry of Energy (MoE) released European regulation updates for energy efficiency in standby mode (EU 2023/826), which will be effective on May 9, 2025.
Official sourceEnergy Efficiency
Egypt
Egyptian MCI Publishes Updated Standards for Air Conditioners
On October 2, 2024, the Ministry of Commerce and Industry (MCI) of Egypt, through Ministerial Decree No. 445/2024, published an addendum to several standards for air conditioners.
These updates took effect on October 2, 2024.
Official sourceEnergy Efficiency
Israel
Israel’s MoE Releases European Regulation Updates for Tumble Dryers
On September 19, 2024, the Ministry of Energy (MoE) of Israel released European regulation updates for tumble dryers (EU 2023/2533, EU 2023/2534) which will be effective on July 1, 2025.
Official sourceEnergy Efficiency
Australia, New Zealand
Australian DCCEEW Publishes Public Consultation on Regulation Impact Statement for Distribution Transformers
On October 14, 2024, the Australian Department of Climate Change, Energy, the Environment and Water (DCCEEW) published a public consultation on the Regulation Impact Statement for distribution transformers. This consultation recommends expanding the scope of regulation and making the minimum energy performance standards more stringent for these transformers.
The closing date for comments is on December 6, 2024, and can be submitted through this link.Energy Efficiency
Australia
Australian DCCEEW Publishes Greenhouse and Energy Minimum Standards Determination for Refrigerated Cabinets
On September 10, 2024, Australia’s Department of Climate Change, Energy, the Environment and Water (DCCEEW) published the Greenhouse and Energy Minimum Standards (GEMS) Determination 2024 for refrigerated cabinets. This GEMS Determination establishes minimum energy efficiency and associated requirements for conducting tests for refrigerated display cabinets, refrigerated storage cabinets, ice cream freezers and refrigerated display scooping cabinets for gelato.
Official sourceEnergy Efficiency
Costa Rica
Costa Rica MINAE Extends the Application Date for Energy Efficiency Specifications for Refrigerators and Freezers
On October 11, 2024, the Ministry of Environment and Energy (MINAE) announced the extension of the entry into force of the technical regulation RTCA 97.01.81:22 which deals with the energy efficiency specifications of electrical products, specifically refrigerators and freezer appliances.
The new entry date of this technical regulation is December 5, 2024.
Please contact your local UL Solutions office for more information.Energy Efficiency
Mexico
UL Solutions Mexico Laboratory Receives CONUEE Approval for Testing
On October 4, 2024, the National Commission for the Efficient Use of Energy (CONUEE) approved UL Solutions de Mexico, S.A. DE C.V. as a testing laboratory for NOM-015-ENER-2018.
Official sourceEnergy Efficiency
India
India MoP Releases Amendment Notification for Refrigerators
On October 11, 2024, India’s Ministry of Power (MoP) released amendment Notification No. S.O. 4490(E) to update the existing star rating or star level plan of refrigerators and add new tables for rating star or star level plan after they expire.
Please contact your local UL Solutions office for more information.Energy Efficiency
Uruguay
Uruguay DNE Publishes Results of the Technical Regulation of Incandescent Lamps
On October 10, 2024, the National Energy Directorate (DNE) in Uruguay published the result of the public consultation on the technical regulation of incandescent lamps.
The final stage for receiving contributions was November 4, 2024 (considering only the LED lamps adjustment).
Official sourceEnergy Efficiency
China
China SAMR Publishes Draft Standard for LED Road and Tunnel Lighting
On October 17, 2024, the State Administration for Market Regulation (SAMR) of the People’s Republic of China published draft standard GB 37478-202X: Energy efficiency limits and energy efficiency classes for LED luminaires for road and tunnel lighting, through the WTO website for public consultation.
This document outlines the energy efficiency grades, limit values and test methods for LED lamps used in road and tunnel lighting and will replace GB 37478-2019: Energy efficiency limits and energy efficiency classes for LED luminaires for road and tunnel lighting.
The feedback period is until December 16, 2024.
Official sourceEnergy Efficiency
Honduras
Honduras Ministry of Energy Publishes Draft Technical Regulation for the Energy Efficiency of Motors
On October 21, 2024, the Ministry of Energy of Honduras published the draft technical regulation RTH 29.04.04.24. This regulation deals with energy efficiency limits, test methods and labeling for three-phase, squirrel-cage AC induction motors, with nominal power from 0.746 to 373 kW.
Comments are accepted until December 20, 2024.
Official sourceEnergy Efficiency
Hong Kong
Hongkong EMSD Conducts Compliance Monitoring Testing on Energy Performance
On October 17, 2024, the Electrical and Mechanical Services Department (ESMD) of Hong Kong arranged compliance monitoring tests by independent accredited laboratories for the following products:- Refrigerating appliance models
- Compact fluorescent lamp (CFL) models
- Washing machine models
- Dehumidifier models
- Television models
- Storage-type electric water heater models
- Induction cooker models
Energy Efficiency
Bahrain
Bahrain BSMD Prepares Draft Technical Regulations on Requirements for Clothes Washing Machines
On October 24, 2024, the Bahrain Standards and Metrology Directorate (BSMD), under the Ministry of Industry and Commerce of the Kingdom of Bahrain, prepared the draft Technical Regulation on Energy Performance, Testing and Labeling Requirements for Clothes Washing Machines.
The deadline for comments is December 23, 2024.
Official sourceEnergy Efficiency
South Korea
South Korea KEA Expands the Items for Automatic Approval of Reports for Efficiency Management Equipment
On October 23, 2024, the Korea Energy Agency (KEA) issued a notice of the expansion of items subject to the automatic approval function for reporting efficiency management equipment. This is in order to shorten the review and approval time required by the corporation's item manager after the efficiency management equipment model report from a manufacturing (importing) company.
This expansion of items started on November 1, 2024.
Official sourceEnergy Efficiency
Mexico
Mexico SE Publishes Draft Energy Efficiency Standard for Electric Motors
On October 9, 2024, the Mexico Secretary of Economy (SE) published a draft Mexican official standard, PROY-NOM-014-ENER-2024. This standard deals with energy efficiency limits, test methods and labeling of single-phase, induction, squirrel-cage type electric motors, cooled with air, with nominal power from 0.180 kW to 2.238 kW.
Comments can be submitted until December 8, 2024, at CCNNPURRE, located at:
Av. Revolución No. 1877, Colonia Loreto, Alcaldía Álvaro Obregón, Mexico City, CP 01090.
Email: norma.morales@conuee.gob.mx and alberto.lopez@conuee.gob.mx.
Official sourceEnergy Efficiency, Performance
Belarus, EAEU
Belarus Council of Ministers Resumes Mandatory Energy Efficiency Labeling Requirements for Energy-Using Appliances
On September 26, 2024, the Council of Ministers of the Republic of Belarus published Resolution No. 708 which intends to reinstate the mandatory national energy efficiency labeling requirements for energy-using electrical appliances by January 3, 2025. These products were suspended from mandatory requirements on January 1, 2023, through the Resolution of the Council of Ministers No. 916, dated 27.12.2022.
Please contact your local UL Solutions office for more information.Energy Efficiency, Performance
Thailand
Thailand MIND Announces New Industrial Product Standards for Energy Efficiency of Power Transformers
On September 27, 2024, the Ministry of Industry (MIND) of Thailand announced the establishment of a new industrial product standard, TIS 384 Part 20-2567 (2024). This standard is known as Power transformers - Part 20: Energy efficiency.
This standard took effect on September 28, 2024.
Official sourceEnergy Efficiency, Performance
India
India BIS Releases Draft Revised Standard for Bottle Coolers Specification
On August 30, 2024, the Bureau of Indian Standards (BIS) released draft standard IS 2167 for bottle cooler specification (fourth revision) to adopt the standard ISO 22044:2021: Commercial beverage coolers - classification, requirements and test conditions with modifications.
Comments and feedback can be sent to med@bis.gov.in until November 19, 2024.
Official sourceEnergy Efficiency, Performance
Egypt
Egypt EOS Publishes Updated Standard for Eco-Design Requirements for Water Pumps
On October 2, 2024, the Egyptian Organization for Standardization and Quality (EOS) published updated Egyptian standard ES 8441:2024 Eco-design requirements for water pumps energy efficiency.
Official sourceEnergy Efficiency, Performance
Egypt
Egypt EOS Publishes Draft Standard for Determining the Minimum Efficiency Index of Water Pumps
On October 9, 2024, the Egyptian Organization for Standardization and Quality (EOS) published a draft standard for the determination of the Minimum Efficiency Index (MEI) and Minimum required energy efficiency of pumps and rotodynamic pumps.
The comment period is until December 8, 2024.
Official sourceEnergy Efficiency, Performance
Georgia
Georgia Government Publishes Regulation for Energy Labeling of Professional Refrigerated Storage Cabinets
On October 3, 2024, the Government of Georgia published Resolution No. 331 on the approval of the technical regulation of the rule of energy labeling of professional refrigerated storage cabinets.
The Resolution will be effective on December 31, 2025.
Official sourceEnergy Efficiency, Performance
Georgia
Georgia Government Publishes Regulation for Energy Labeling of Household Washing and Drying Machines
On October 3, 2024, the Government of Georgia published Resolution No. 333 on the approval of the technical regulation of the rules for energy labeling of household washing machines and combined household washing-drying machines.
The Resolution will be effective on December 31, 2025.
Official sourceEnergy Efficiency, Performance
Georgia
Georgia Government Publishes Resolution on Technical Regulation for Energy Labeling of Refrigerating Appliances
On October 3, 2024, the Government of Georgia published Resolution No. 321 on the approval of the technical regulation for energy labeling of refrigeration equipment.
The Resolution will be effective on December 31, 2025.
Official sourceEnergy Efficiency, Performance
Georgia
Georgia Government Publishes Resolution on Technical Regulation for Energy Labeling of Light Sources
On October 3, 2024, the Government of Georgia published Resolution No. 324 on the approval of the technical regulation for energy labeling of light sources.
The Resolution will be effective on December 31, 2025.
Official sourceEnergy Efficiency, Performance
Georgia
Georgia Government Publishes Resolution on Technical Regulation for Energy Labeling of Household Dishwashers
On October 3, 2024, the Government of Georgia published Resolution No. 323 on the approval of the technical regulations on rules for energy labeling of household dishwashers.
The Resolution will be effective on December 31, 2025.
Official sourceEnergy Efficiency, Performance
Australia
Australian DCCEEW Publishes Determination for Incandescent Lamps for General Lighting Services
On September 10, 2024, the Department of Climate Change, Energy, the Environment and Water (DCCEEW) of Australia published the Greenhouse and Energy Minimum Standards (GEMS) Determination 2024 for Incandescent Lamps for General Lighting Services.
This determination is effective starting October 5, 2025.
Official sourceEnergy Efficiency, Performance
Australia
Australian DCCEEW Publishes Greenhouse and Energy Minimum Standards (GEMS) Determination for Dishwashers
On September 10, 2024, the Department of Climate Change, Energy, the Environment and Water (DCCEEW) in Australia published the Greenhouse and Energy Minimum Standards (GEMS) Determination 2024 for dishwashers. It outlines energy efficiency, energy labeling, product performance and testing requirements for household dishwashers.
This standard is effective starting October 5, 2025.
Official sourceEnergy Efficiency, Performance
Australia
Australian DCCEEW Publishes Greenhouse and Energy Minimum Standards (GEMS) Determination for Clothes Washing Machines
On September 10, 2024, the Australian Department of Climate Change, Energy, the Environment and Water (DCCEEW) published the Greenhouse and Energy Minimum Standards (GEMS) Determination 2024 for clothes washing machines. This GEMS Determination establishes minimum energy efficiency requirements, energy labeling, product performance and associated requirements for conducting tests for household
clothes washing machines.
This determination is effective starting October 5, 2025.
Official sourceEnergy Efficiency, Performance
Australia
Australian DCCEEW Publishes Greenhouse and Energy Minimum Standards (GEMS) Determination for Rotary Clothes Dryers
On September 10, 2024, the Department of Climate Change, Energy, the Environment and Water (DCCEEW) published the Greenhouse and Energy Minimum Standards (GEMS) Determination 2024 for Rotary Clothes Dryers.
This determination is effective starting October 5, 2025.
Official sourceEnergy Efficiency, Performance
Georgia
Georgia Government Publishes Regulation for Energy Labeling of Solid Fuel Boilers, Heaters, Temperature Regulators and Solar Panels
On October 3, 2024, the Government of Georgia published Resolution No. 325 on the approval of the technical regulation for energy labeling of solid fuel boilers and sets of solid fuel boilers, additional heaters, temperature regulators and sets of solar panels.
The Resolution will be effective on December 31, 2025.
Official sourceEnergy Efficiency, Performance
Georgia
Georgia Government Publishes Regulation for Energy Labeling of Household Ventilation Units
On October 3, 2024, the Government of Georgia published Resolution No. 329 on the approval of the technical regulation for energy labeling of household ventilation units.
The Resolution will be effective on December 31, 2025.
Official sourceEnergy Efficiency, Performance
Georgia
Georgia Government Publishes Regulation for Energy Labeling of Household Kitchen Ovens and Hoods
On October 3, 2024, the Government of Georgia published Resolution No. 332, approving the technical regulation of energy labeling of household kitchen ovens and hoods.
The Resolution will be effective on December 31, 2025.
Official sourceEnergy Efficiency, Performance
Georgia
Georgia Government Publishes Regulation for Energy Labeling of Electronic Displays
On October 3, 2024, the Government of Georgia published Resolution No. 322, approving the technical regulation for energy labeling of electronic displays.
The Resolution will be effective on December 31, 2025.
Official sourceEnergy Efficiency, Performance
Georgia
Georgia Government Publishes Regulation for Energy Labeling of Household Dryers
On October 3, 2024, the Government of Georgia published Resolution No. 328, approving the technical regulation for energy labeling of household dyers.
The Resolution will be effective on December 31, 2025.
Official sourceExplosive Atmospheres
EU
European Union CEN Publishes New Standard for Equipment and Systems Intended for Use In Explosive Atmospheres
On October 2, 2024, the European Committee for Standardization (CEN) published the new standard, EN 13237:2024 for Potentially explosive atmospheres - terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres.
The date of withdrawal of the previous version is April 30, 2025.
Official sourceExplosive Atmospheres
EU
European Union CEN Publishes New Standard for Explosive Atmospheres with Test Methods and Limits for Use
On October 9, 2024, the European Committee for Standardization (CEN) published a new standard, EN ISO/IEC 80079-49:2024 for Explosive atmospheres - Part 49: flame arresters - performance requirements, test methods and limits for use.
The date of withdrawal of the previous version is October 31, 2025.
Official sourceExplosive Atmospheres
EU
European Union CENELEC Publishes New Standard for Electrical Installation Design, Selection and Installation in Explosive Atmospheres
On October 11, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60079-14:2024 for Explosive atmospheres - Part 14: electrical installation design, selection and installation of equipment, including initial inspection.
The date of withdrawal of the previous version is October 4, 2027.
Official sourceExplosive Atmospheres
Australia, New Zealand
Australia and New Zealand Prepare Draft Standard for Equipment Used in Explosive Atmospheres
On October 16, 2024, the Standards Australia and New Zealand prepared the draft standard AS/NZS 60079.19:2024. This standard gives instructions, principally of a technical nature, on the repair, overhaul, reclamation and modification of equipment designed for use in explosive atmospheres.
The deadline for comments is December 18, 2024, and can be submitted via this link.
Please contact your local UL Solutions office for more information.F Gas, Chemicals
Israel
Israel Ministry of Environmental Protection Publishes Draft Amendment to Hazardous Substances Regulation to Delay HFCs Reduction Target
On September 30, 2024, the Israel Ministry of Environmental Protection published Draft Hazardous Substances Regulations (Implementation of the Montreal Protocol on Substances Affecting the Ozone Layer) (Amendment), 5774-2024. This amends the Hazardous Substances Regulations (Implementation of the Montreal Protocol on Substances Harmful to the Ozone Layer), 5764-2004 which provides measures of limitations on the manufacture, use, importation and exportation of substances under control, because of the harm they currently cause or may cause to the stratospheric ozone layer.
The feedback period ended on October 21, 2024.
Official sourcePerformance
Australia
Australia Prepares Draft Standard for Energy Storage Systems
On September 17, 2024, Standards Australia prepared the draft standard DR AS IEC 62282.8.101:2024. The standard addresses solid oxide cell (SOC) and stack assembly units. It provides for testing systems, instruments and measuring methods to test the performance of SOC cell/stack assembly units for energy storage purposes.
The closing date for comments was October 15, 2024.
Please contact your local UL Solutions office for more information.Performance
Global
IEC Publishes New Standard to Determine Attenuation of Coaxial Communication Cables
On September 23, 2024, the International Electrotechnical Commission (IEC) released IEC 61196-1-113:2024. This standard provides specific test methods for determining the attenuation constant of coaxial cables.
Official sourcePerformance
Global
IEC Publishes New Standard Measuring Methods of Optical Characteristics for Display with Under-Screen Feature
On October 3, 2024, the International Electrotechnical Commission (IEC) released IEC 62341-6-7:2024. This standard focuses on measuring methods of optical characteristics for display with under-screen feature.
Official sourcePerformance
Global
IEC Publishes New Standard on Methods for Measuring the Performance of Electrical Rice Cookers
On October 3, 2024, the International Electrotechnical Commission (IEC) released IEC 63399:2024. This standard deals with measuring the performance of electrical rice cookers.
Official sourcePerformance, Energy Efficiency
EU
European Union EC Publishes List of Standards for Ecodesign of Air Heating and Cooling Products, High-Temperature Process Chillers and Fan Coil Units
On October 11, 2024, the European Commission (EC) published the Commission Implementing Decision (EU) 2024/2638 of 9 October 2024 on the harmonized standards drafted in support of Regulation (EU) 2016/2281, laying down ecodesign requirements for air heating products, cooling products, high-temperature process chillers and fan coil units.
The list of harmonized standards for ecodesign drafted in support of Regulation (EU) No. 2016/2281 enters into force on the date of publication, October 11, 2024.
Official sourcePerformance, Safety
Global
IEC Publishes New Standard for Requirements for Hand-Held Reciprocating Saws
On October 9, 2024, the International Electrotechnical Commission (IEC) released IEC 63241-2-11:2024. The standard outlines the dust measurement procedure for electric motor-operated tools, with requirements focused on hand-held reciprocating saws.
Official sourceProduct Accessibility
United Kingdom
United Kingdom Government Updates the Guidance for Understanding Accessibility Requirements for Public Sector Bodies
On September 30, 2024, the Government of the United Kingdom updated the Guidance for Understanding Accessibility Requirements for Public Sector Bodies.
Official sourceRoHS, Chemicals
China
China SAC/SAMR Publishes Standard for the Declaration of Hazardous Substances in EEE Products
On September 29, 2024, the Standardization Administration under the State Administration for Market Regulation (SAMR) of the People’s Republic of China published the voluntary standard GB/T 44652-2024, Material Declaration of Electrical and Electronic Products — Requirements of Declaration for Hazardous Substances.
The standard was implemented on September 29, 2024.
Official sourceRoHS, Chemicals
China
China SAC/SAMR Publishes Four Test Determination Standards for Certain Substances in EEE Products
On September 24, 2024, the Standardization Administration under the State Administration for Market Regulation (SAMR) of the People’s Republic of China published a Notice publicizing the full text of the National Standards in the 2024 China National Standards Announcement No. 17. The Notice includes four voluntary standards for the determination of the following substances in electrical and electronic equipment (EEE):- Fluorine, chlorine and bromine
- Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates
- Hexabromocyclododecane
- Polycyclic aromatic hydrocarbons (PAHs)
The implementation date of these standards will be December 1, 2024.
Official sourceRoHS, Chemicals, Energy Efficiency
Taiwan
Taiwan BSMI Issues Amendment of Certification Requirements for Low-Voltage Three-Phase Induction Motors
On September 24, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) of the Ministry of Economic Affairs (MOEA) of Taiwan issued the Amendment of Legal Inspection Requirements for Motor Products, which was effective on the same day.
Official sourceRoHS, Safety, Noise, Wireless, Performance
China
China SAC/SAMR Issues Recommended National Standards for Various Household and Similar Electrical Appliances
On August 23, 2024, the National Standardization Administration (SAC) of the State Administration for Market Regulation (SAMR) of China published Announcement No. 17 of 2024, which approved the 335 Recommended National Standards. This included the GB/T 4706 series standards for the safety requirements of various household and similar electrical appliances, with different implementation dates.
Official sourceSafety
India
India BIS Publishes Latest Amendment to Standard for Finned Type Heat Exchanger for Room Air Conditioners
On August 21, 2024, the Bureau of Indian Standards (BIS) published notification ref.: HQ-PUB015/1/2020-PUB-BIS (1012) for amendment No. 3 of IS 11329:2018 finned type heat exchanger for room air conditioner (first revision), which will be mandatory on February 9, 2025.
Please contact your local UL Solutions office for more information.Safety
Vietnam
Vietnam VSQI Publishes Public Consultation on Draft National Standards for Photovoltaic (PV) Modules
On September 27, 2024, the Vietnam Standards and Quality Institute (VSQI) published a public consultation on draft national standards for photovoltaic (PV) modules. The draft standards specify requirements for building-integrated photovoltaic (BIPV) modules and design quality and type approval of ground-mounted photovoltaic modules.
The deadline for comments is November 26, 2024 and can be sent via email: http://tc2@vsqi.gov.vn, or to the following address:
Quality Standards Department 2 - Vietnam Standards and Quality Institute, No. 8 Hoang Quoc Viet, Nghia Do, Cau Giay, Hanoi
Phone: 024.38361465
Official sourceSafety
CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 39 (2024-W39)
On September 27, 2024, new TRFs were published and added to the IECEE website.
Official sourceSafety
Ukraine
Ukraine Ministry of Economy Publishes Changes to the List of National Standards Related to General Product Safety (Order No. 18573)
On July 26, 2024, the Ministry of Economy published Order No. 18573 on the approval of changes made to the list of national standards. These are harmonized with the relevant European standards and are proof of the safety of non-food products, formed on the basis of the European Commission Implementing Decision (EU) 2019/1698 of 09.10.2019.
Official sourceSafety
Saudi Arabia
Saudi Arabia SASO Publishes Guide for Technical Regulations for Electric Personal Mobility (Scooters)
On August 1, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) published a guide for technical regulations for electric personal mobility (scooters).
Official sourceSafety
Saudi Arabia
Saudi Arabia SASO Issues Notification to Update HS Codes to Include in Saber Platform
On September 12, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) issued a notification to update HS codes to include in the Saber platform, subject to technical regulations.
Official sourceSafety
India
India BIS Releases Draft Revised Standards for PVC Insulated (Heavy Duty) Electric Cables
On September 6, 2024, the Bureau of Indian Standards (BIS) released draft standards IS 1554 Part 1 PVC insulated (heavy duty) electric cables - Specification Part 1 for working voltages up to and including 1100 V (fourth revision) and IS 1554 Part 2 PVC insulated (heavy duty) electric cables - Specification Part 2 for working voltages from 3.3 kV up to and including 11 kV (third revision).
Comments and feedback were accepted until October 12, 2024.
Official sourceSafety
Australia, New Zealand
Australia and New Zealand Prepare Draft Standard for General Requirements and Tests for Luminaires
On October 2, 2024, the Standards Australia and New Zealand prepared the draft standard DR AS/NZS 60598.1:2024. This standard specifies general requirements for luminaires incorporating electric light sources for operation from supply voltages up to 1000 V.
The closing date for comments was November 13, 2024.Please contact your local UL Solutions office for more information.
Safety
EU
European Union CENELEC Publishes Amended Standard for Charging Cables for Electric Vehicles
On September 27, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 50620:2017/A2:2024 for Electric cables - charging cables for electric vehicles.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard for Alternating-Current Circuit-Breakers
On September 27, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 62271-100:2021/A1:2024 for High-voltage switchgear and control gear: alternating-current circuit-breakers.
Official sourceSafety
Brazil
Brazil INMETRO Amends Ordinance for Regulation and Assessment for Electric Energy Generation, Conditioning and Storage Equipment in Photovoltaic Systems
On September 27, 2024, the National Institute of Metrology, Quality and Technology (INMETRO) amended Inmetro Ordinance no. 140 for technical quality regulation and conformity assessment requirements for electric energy generation, conditioning and storage equipment in photovoltaic systems.
This notification is in conjunction with Inmetro Ordinance No. 140, issued in the Official Gazette of the Union of March 30, 2022.
Please contact your local UL Solutions office for more information.Safety
Argentina
Argentina Secretariat of Industry and Commerce Publishes Technical Regulation for the Quality and Safety of Electrical Installations
On August 30, 2024, the Secretariat of Industry and Commerce published Resolution 236/2024 regarding the technical regulation establishing the essential quality and safety requirements of materials for electrical installations used for construction materials.
This Resolution came into force the day after its release.
Official sourceSafety
Vietnam
Vietnam MoPS-DoTP Prepares Draft Technical Regulation on Automobile Tachograph and Driver Image Digital Video Recorder
On October 2, 2024, Vietnam’s Ministry of Public Security - Department of Traffic Police (MoPS-DoTP) prepared a draft Technical Regulation (QCVN xxxxx:2024/BCA) on automobile tachograph and driver image digital video recorders. This Regulation specifies the technical requirements for tachograph and driver image digital video recorders on different types of automobiles subjected to the installation by the Law on road traffic order and safety.
The deadline for comments is December 1, 2024, and can be sent via email: csgtvn@mps.gov.vn.
Official sourceSafety
Thailand
Thailand TISI Issues Draft Ministerial Regulation for Household Washing Machines
On September 23, 2024, the Thai Industrial Standards Institute (TISI) issued a draft ministerial regulation specifying that the industrial product, electric washing machines for residential and similar use, must comply with TIS 60335 Part 2(7) - 25XX (20XX): Safety of Household Electrical Appliances and other Similar Electrical Appliances, Part 2(7) - Specific Requirements for Washing Machines.
Comments may be submitted by writing to the Thai Industrial Standards Institute or through an online feedback form link until November 21, 2024.
Official sourceSafety
Israel
Israel MEI Announces Cancellation for Sections of Official Standards Regarding Safety of Hand-Held Motor-Operated Electric Tools
On September 19, 2024, the Ministry of Economy and Industry (MEI) announced in Publication No. 11471 the changes for sections of official standards SI 900 Part 1 - safety of household and similar electrical appliances - general requirements and SI 60745 Part 1 - hand-held motor-operated electric tools - safety general requirements, which took effect on the same day.
Official sourceSafety
EU
European Union CEN Publishes New Standard for Vertical Panel Circular Sawing Machines
On October 2, 2024, the European Committee for Standardization (CEN) published a new standard, EN ISO 19085-4:2024 for Woodworking machines - safety - Part 4: vertical panel circular sawing machines.
The date of withdrawal of the previous version is October 31, 2026.
Official sourceSafety
EU
European Union CEN Publishes New Standard for Woodworking Dimension Saws
On October 2, 2024, the European Committee for Standardization (CEN) published a new standard, EN ISO 19085-5:2024 for Woodworking machines - safety - Part 5: dimension saws.
The date of withdrawal of the previous version is October 31, 2026.
Official sourceSafety
U.S.
U.S. CPSC Extends Comment Period for the Proposed Rules for the Requirements for Toys Containing Button Cell or Coin Cell Batteries
On September 30, 2024, the U.S. Consumer Product Safety Commission (CPSC) extended the comment period for the proposed rules for the safety requirements of toys containing button cell or coin batteries to November 14, 2024.
Official sourceSafety
EU
European Union CEN Publishes New Standard for Surface Planning and Thickness Planning Machines
On October 2, 2024, the European Committee for Standardization (CEN) published a new standard, EN ISO 19085-7:2024 for Woodworking machines - safety - Part 7: surface planning, thickness planning and combined surface/thickness planning machines.
The date of withdrawal of the superseded version is April 30, 2025.
Official sourceSafety
Argentina
Argentina Secretariat of Industry and Commerce Releases Amendment Resolution for Requirements for Solar Collectors and Compact Solar Systems
The Secretariat of Industry and Commerce released Resolution 236/2024 which repeals the technical quality and safety requirements for solar collectors and compact solar systems, specified in Resolution 753/2020.
Official sourceSafety
EU
European Union CEN Publishes New Standard for Wide Belt Sanding Machines and Surface Treating Machines
On October 2, 2024, the European Committee for Standardization (CEN) published a new standard, EN ISO 19085-8:2024 for Woodworking machines - safety - Part 8: wide belt sanding machines and surface treating machines.
The date of withdrawal of the superseded version is October 31, 2026.
Official sourceSafety
EU
European Union CEN Publishes New Standard for Circular Saw Benches
On October 2, 2024, the European Committee for Standardization (CEN) published a new standard, EN ISO 19085-9:2024 for Woodworking machines - safety - Part 9: circular saw benches (with and without sliding table).
The date of withdrawal of the superseded version is April 30, 2025.
Official sourceSafety
Ecuador
Ecuador INEN Publishes First Revision of the Ecuadorian Technical Regulation for Manual and Semi-Fixed Electric Tools
On September 27, 2024, the Ecuadorian Standardization Service (INEN) published the first revision of RTE 137 (1R). This technical regulation deals with manual and semi-fixed electric tools powered by electric motors.
RTE 137 (1R) will enter into force on March 28, 2025.
Official sourceSafety
EU
European Union CEN Publishes New Standard for Woodworking Combined Machines
On October 2, 2024, the European Committee for Standardization (CEN) published a new standard, EN ISO 19085-11:2024 for Woodworking machines - safety - Part 11: combined machines.
The date of withdrawal of the superseded version is April 30, 2025.
Official sourceSafety
CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 40 (2024-W40)
On October 4, 2024, new TRFs were published and added to the IECEE website.
Official sourceSafety
Ukraine
Ukraine Cabinet of Ministers Decide to Return to Market Surveillance of Non-Food Products
On September 16, 2024, the Ukrainian Cabinet of Ministers partially resumed scheduled market surveillance inspections for certain non-food products that may pose a potential threat to consumers. Products involved are children's toys, elevators and elevator equipment, electrical and electronic devices, heaters and other goods.
Official sourceSafety
Global
IEC Publishes New Standard IEC 62471-7:2023/COR2:2024 for Light Sources and Luminaires Primarily Emitting Visible Radiation
On September 19, 2024, the International Electrotechnical Commission (IEC) released IEC 62471-7:2023/COR2:2024. This standard focuses on the photobiological safety of electrical light sources and luminaires.
Official sourceSafety
Brazil
Brazil ABNT Publishes New Standard for Tractors and Machinery for Agriculture and Forestry
On September 27, 2024, the Brazilian Association of Technical Standards (ABNT) published a new standard, ABNT NBR ISO 5676:2024 for Tractors and machinery for agriculture and forestry - hydraulic coupling - braking circuit.
The date of withdrawal of the superseded version was September 27, 2024.
Official sourceSafety
China
China CQC Issues Notice on Revised Implementation Rules for Safety Certification of Cables for Electric Vehicle Conductive Charging Systems
On October 1, 2024, the China Quality Certification Centre (CQC) issued a notice on the revised implementation rules for safety certification of cables of electric vehicle conductive charging systems (CQC11-463426-2024) to replace the old version (CQC11-463426-2022) which was implemented on October 1, 2024.
Official sourceSafety
India
India MNRE Extends Submission of Comments for Draft Amendment Regulation on Approved List of Models and Manufacturers for Solar PV Cells
On October 4, 2024, the Ministry of New and Renewable Energy (MNRE) extended the timeline for submission of views, comments or suggestions regarding the draft amendment regulation on the approved list of models and manufacturers for solar PV cells.
Comments and feedback were accepted until October 21, 2024.
Official sourceSafety
China
China CNCA Announces the Designated Certification Bodies and Labs for CCC Certification of Lithium-Ion Batteries and Chargers for Electric Bicycles
On September 30, 2024, China’s National Certification and Accreditation Administration (CNCA) released a list of the designated certification bodies and laboratories for CCC certification of lithium-ion batteries and chargers for electric bicycles and other products in CCC categories.
Official sourceSafety
Vietnam
Vietnam VSQI Publishes Public Consultation on Draft National Standards for Plugs, Sockets and Connectors for Electric Vehicles
On October 11, 2024, the Vietnam Standards and Quality Institute (VSQI) published a consultation on draft national standards for plugs, sockets and connectors for electric vehicles.
The deadline for comments was November 14, 2024.
Official sourceSafety
India
India BIS Publishes Updated Guidelines for Grant of License (GoL) Under Scheme I of BIS (Conformity Assessment) Regulations 2018
On September 27, 2024, the Bureau of Indian Standards (BIS) published updated guidelines for the Grant of License (GoL) under Scheme - I of Schedule - II of BIS (Conformity Assessment) Regulations, 2018.
Official sourceSafety
Ecuador
Ecuador INEN Publishes First Revision of the Ecuadorian Technical Regulation for Generating Sets
On September 30, 2024, the Ecuadorian Standardization Service (INEN) published the first revision of RTE 092 (1R). This technical regulation deals with generating sets.
RTE 092 (1R) will come into force on March 30, 2025.
Official sourceSafety
Egypt
Egypt EOS Prepares Draft Safety Standard for Audio/Video, Information and Communication Technology Equipment
On October 8, 2024, the Egyptian Organization for Standardization and Quality (EOS) prepared a new draft Egyptian Standard ES 2501 for the Safety Requirement of Audio/Video, Information and Communication Technology Equipment.
Official sourceSafety
Global
IEC Publishes New Standard IEC 61557-10:2024 for Combined Measuring Equipment Used in Low Voltage Distribution Systems
On October 4, 2024, the International Electrotechnical Commission (IEC) released IEC 61557-10:2024. This standard specifies the requirements for combined measuring equipment used in low-voltage distribution systems.
Official sourceSafety
Australia
Australia Prepares Draft Amendment to Standard AS 60598.2.4:2019 for Safety Requirements for Portable General-Purpose Luminaires
On October 16, 2024, Standards Australia prepared an amendment to draft standard AS 60598.2.4:2019. This standard specifies requirements for portable general-purpose luminaires for indoor and/or outdoor use (e.g. garden use), other than handlamps, designed to be used with or incorporating electrical light sources on supply voltages not exceeding 250 V.
The closing date for comments is December 18, 2024, and can be submitted in this link.
Please contact your local UL Solutions office for more information.Safety
India
India BIS Releases Guidelines for Implementation of Revised Standard for Household Electronic Control Devices
On September 27, 2024, the Bureau of Indian Standards (BIS) released guidelines for implementation of revised IS/IEC 60669-2-1:2021 switches for household and similar fixed electrical installations Part 2 particular requirements Section 1 electronic control devices (first revision), effective immediately.
Official sourceSafety
Canada
Health Canada Publishes Amendment to the Regulation Concerning Laser Products
On September 27, 2024, the recommendation from Health Canada to amend the Radiation Emitting Devices Regulations was approved and published. This amendment, SOR/2024-196 - Regulations Amending the Radiation Emitting Devices Regulations (Laser Products), will replace the current requirements for laser scanners and demonstration lasers in the REDR, with modern requirements applicable to the broad scope of laser products available to Canadian people, and proportional to their level of hazard.
To support the laser industry transition, the new Regulations will come into force 12 months from its publication in Canada Gazette, Part II.
Official sourceSafety
India
India BIS Extends Implementation Date of Revised Standards for Household Electronic Control Devices
On October 16, 2024, the Bureau of Indian Standards (BIS) released an extension of the last date of implementation of revised IS/IEC 60669-2-1:2021 switches for household and similar fixed electrical installations Part 2 particular requirements Section 1 electronic control devices (first revision).
The last date of implementation is extended to April 12, 2025.
Official sourceSafety
CB Scheme
IECEE Adds New Provisional Decision Regarding Use of Pressure-Responsive Electrical Cut-Out for Refrigerant Systems on Week 41 (2024-W41)
On October 7, 2024, the new provisional decision sheet PDSH 2254 was uploaded on the IECEE website. This decision sheet is related to the use of a pressure-responsive electrical cut-out for expansion valve refrigerant systems.
Official sourceSafety
Taiwan
Taiwan MOTC Issues Amendment on Safety Testing Directions for Electric-Auxiliary Bicycles
On September 26, 2024, the Ministry of Transportation and Communications (MOTC) issued Order No. 1130014604, which amends paragraph 3-1 of the Safety Testing Directions of Electric-Auxiliary Bicycles.
This Order took effect on the same day of its publication.
Official sourceSafety
India
India DPIIT Releases Quality Control Order for Electrical Appliances for Dispensing and Vending, 2024
On October 17, 2024, the Department for Promotion of Industry and Internal Trade (DPIIT) released Electrical Appliances for Commercial Dispensing and Vending (Quality Control) Order, 2024 S.O. 4568(E). This Order states the reference for certification by the manufacturer, enforcing authority, and the date of implementation according to enterprises.
This Order took effect on October 17, 2024.
Official sourceSafety
Tanzania
Tanzania TBZ Prepares Various Draft Standards for Safety of Machinery
On October 11, 2024, the Tanzania Bureau of Standards (TBS) prepared various draft standards for the safety of machinery.
The deadline for comments is December 13, 2024.
Official sourceSafety
India
India BIS Releases Guidelines for Implementation of Revised Standard for Household and Similar Electrical Appliances
On October 10, 2024, the Bureau of Indian Standards (BIS) released guidelines for the implementation of revised IS 302 (part 2/sec 3):2024 / IEC 60335-2-3:2022 Household and similar electrical appliances safety Part 2 particular requirements section 3 electric irons (second revision), effective on the same day.
Official sourceSafety
India
India BIS Releases Guidelines for Amendment to Standard for Finned Type Heat Exchanger for Room Air Conditioners
On October 3, 2024, the Bureau of Indian Standards (BIS) released guidelines for implementation of amendment no. 3 of IS 11329:2018 finned type heat exchanger for room air conditioner (first revision), effective on the same day.
Official sourceSafety
India
India BIS Releases Guidelines for Implementation of Revised Standard for Safety Requirements for Storage Water Heaters
On September 9, 2024, the Bureau of Indian Standards (BIS) released guidelines for the implementation of revised IS 302 (Part 2/Sec 21) : 2024 / IEC 60335-2- 21 : 2022 household and similar electrical appliances - safety Part 2 particular requirements Section 21 storage water heaters (third revision), effective on the same day.
Official sourceSafety
U.S., New York
U.S. UL Solutions Safety Standards Implemented in New York to Combat E-Bike Fire Hazards
On October 3, 2024, a publication was posted about the decreasing number of e-bike fire deaths due to New York's Local Law 39, which mandates compliance with safety standards from UL Standards & Engagement.
Official sourceSafety
India
India BIS Releases Guidelines for Implementation of Standard for Digital Television Receivers for Satellite Broadcast Transmission Specification
On October 24, 2024, the Bureau of Indian Standards (BIS) released guidelines for the implementation of IS 18112 : 2022 for digital television receivers for satellite broadcast transmission specification, which has been notified by the Ministry of Electronics and Information Technology (MeitY) on April 26, 2023.
Official sourceSafety
United Kingdom
United Kingdom DBT Extends the Recognition of CE Marking for Construction Products
On September 2, 2024, the Department for Business and Trade (DBT) of the United Kingdom announced that the recognition of CE marking for a subset of construction products placed on the market in Great Britain will continue beyond the previously stated deadline of June 30, 2025. This legislation applies to England, Scotland and Wales.
Official sourceSafety
Global
IEC Publishes New Standard for Requirements for Foot Warmers and Heating Mats
On October 8, 2024, the International Electrotechnical Commission (IEC) released IEC 60335-2-81:2024. This standard deals with household and similar electrical appliances, in particular the requirements for foot warmers and heating mats.
Official sourceSafety
Global
IEC Publishes New Standard for Requirements for Amusement Machines and Personal Service Machines
On October 8, 2024, the International Electrotechnical Commission (IEC) released IEC 60335-2-82:2024. This standard deals with household and similar electrical appliances, in particular the requirements for amusement machines and personal service machines.
Official sourceSafety, Cyber Security
CB Scheme
IECEE Publishes Summary of Decision Sheets from January to September 2024
The following decision sheets were published on the IECEE website from January 2024 to September 2024.
DSH 2238 - U.S.ge of the ETSI TS 103 701 V1.1.1 (2021-08) used as recommended for uniformity of test methodology
DSH 2226 - Vertical flame propagation and smoke emission tests for muti-core cables
DSH 2233 - Special requirements of the damp heat test
DSH 2234 - Special requirements for the cable with non-separable insulation and sheath
DSH 2239 - Requirements for the cable with split power cores.
PDSH 2252 - Type of power cord used for hair straighteners and curlers which exceed the 130 K limit.
PDSH 2241 - Use of part 2 standards with new updated part 1
PDSH 2245A - Unintentional operation test
PDSH 2244 - Functionally earthed parts
PDSH 2243 - Distance through insulation
PDSH 2242 - Electric Strength test
PDSH 2246 - Calibration Interval
Official sourceSafety, Cyber Security
India
India MEITY Extends Implementation Date of the Essential Requirements for CCTV Security
On October 9, 2024, the Ministry of Electronics and Information Technology (MeitY) released an extension for the implementation of the Electronics and Information Technology Goods (Requirement of Compulsory Registration) Order, 2021 for essential requirements of CCTV security published on April 9, 2024, S.O. 4378(E).
The implementation date is extended to April 9, 2025.
Official sourceSafety, Cyber Security
India
India BIS Releases Guidelines for Implementation of Essential Requirements for Security of CCTV
On October 22, 2024, the Bureau of Indian Standards (BIS) released guidelines for the implementation of essential requirements for the security of CCTV, which has been notified by the Ministry of Electronics and Information Technology (MeitY) on April 9, 2024.
Official sourceSafety, EMC
China
China CQC Issues Notice on the New Applicable Standards and Certification Rules for Lighting Appliances (CQC-C1001-2024)
On September 26, 2024, the China Quality Certification Centre (CQC) issued a notice on the new applicable standards GB/T 7000 series and GB/T 19510 series, as well as compulsory product certification implementation rules CQC-C1001-2024 for lighting appliances, which will be effective on October 1, 2024.
Official sourceSafety, EMC
India
India BIS Publishes Amendment Notification for Standard for Low-Voltage Switchgear and Control Gear Circuit-Breakers (First Revision)
On September 25, 2024, the Bureau of Indian Standards (BIS) published Amendment No. Ref: HQ-PUB-BIS (1038) for IS/IEC 60947-2 : 2016 low-voltage switchgear and control gear part 2 circuit-breakers (first revision) to update Notification Ref No. HQ-PUB014/2/2020-PUB-BIS (614) dated May 30, 2023, regarding the validity of the standard without amendment.
Please contact your local UL Solutions office for more information.Safety, EMC
Israel
Israel MEI Publishes Amendment No. 3 of the Free Import Order
On September 30, 2024, the Ministry of Economy and Industry (MEI) published File No. 2132 regarding Amendment No. 3 of the Free Import Order which aims to update the second addendum to align with the provisions of the Standards Law, 1953 and the Import and Export Ordinance.
The implementation date of the amendment was October 30, 2024.
Official sourceSafety, EMC
EAEU
EAEU EEC Publishes Decision on the Harmonized System Code for Hammer Drills
On October 3, 2024, the Board of Eurasian Economic Commission (EEC) published the Decision of the EEC Board No. 111 on the classification of drills in accordance with the Unified Commodity Nomenclature of Foreign Economic Activity of the Eurasian Economic Union. Under this Decision, drills are classified in subheading 846721 of the uniform heading nomenclature of foreign economic activity of the Eurasian Economic Union.
This Decision entered into force on November 7, 2024.
Official sourceSafety, EMC, Performance
CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 37 (2024-W37)
On September 13, 2024, new TRFs were published and added to the IECEE website.
Official sourceSafety, EMC, Performance
Singapore
Singapore LTA Publishes Several Amendments to Electric Vehicles Charging Act 2022
On September 27, 2024, the Land Transport Authority (LTA) of Singapore published three amendments to the Electric Vehicles Charging Act 2022. These amendments are the following:
- S 753/2024- Electric Vehicles Charging (Electric Vehicle Chargers) (Amendment No. 2) Regulations 2024
- S 754/2024 - Electric Vehicles Charging (Exemption) (Amendment) Order 2024
These amendments took effect on October 1, 2024,
Official sourceSafety, Energy Efficiency
United Arab Emirates
UAE MoIAT Publishes Ministerial Resolution on the Approval of New Conformity Marks and Energy Efficiency Labels
On September 16, 2024, the Ministry of Industry and Advanced Technology (MoIAT) published Ministerial Resolution No. (137) of 2024 regarding the New Conformity Marks and Energy Efficiency Labels.
Official sourceSafety, Performance
South Korea
South Korea KATS Announces the Explanation for Distribution of Reusable Battery Safety Standards
On September 11, 2024, the South Korean Agency for Technology and Standards (KATS) published the commentary for the Distribution of Reusable Battery Safety Standards (KC10031). This explanatory document contains the details for carrying out safety inspection work in accordance with the Safety Requirements for Lithium Secondary Batteries for the Reuse of Spent Batteries (KC 10031).
This announcement took effect on its date of publication, which was September 11, 2024.
Official sourceSafety, Performance
India
India BIS Publishes Amendment Notification for Terrestrial Photovoltaic Modules and Utility Standards
On August 19, 2024, the Bureau of Indian Standards (BIS) published amendment No. Ref: HQ-PUB- BIS (1006) for terrestrial photovoltaic modules and utility-interconnected photovoltaic inverters Indian standards, to update Notification Ref No. S.O. 1977(E) and Ref No. S.O. 1979(E) dated June 14, 2019, regarding the date of the Indian standards to be withdrawn.
Please contact your local UL Solutions office for more information.Safety, Performance
EU
European Union CENELEC Publishes Amended Standard to Photodynamic Therapy and Photodynamic Diagnosis Equipment
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60601-2-75:2019/A1:2024 for Medical electrical equipment - Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes New Standard for Lens Removal Devices and Vitrectomy Devices for Ophthalmic Surgery
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 80601-2-58:2024 for Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery.
The date of withdrawal of the superseded version is July 31, 2027.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes Amended Standard for Medical Robots for Rehabilitation, Assessment, Compensation or Alleviation
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 80601-2-78:2020/A1:2024 for Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation.
Official sourceSafety, Performance
Lebanon
Lebanon Council of Ministers Publishes List of Mandatory Standard Specifications Related to LED Lamps
On September 19, 2024, the Lebanese Council of Ministers published Decree No. 13954 giving legally binding status to national standard specifications for LED lamps.
This Decree was issued in the Official Gazette No. 38 on September 19, 2024.
Official sourceSafety, Performance
Saudi Arabia
Saudi Arabia SASO Prepares Draft Technical Regulation for Personal Care Products
On October 7, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) prepared a draft technical regulation for personal care products.
Comments and feedback can be sent to enquirypoint@saso.gov.sa until December 6, 2024.
Official sourceSafety, Performance
Brazil
Brazil ABNT Publishes Standard for Electrical Overhead Distribution Lines
On October 7, 2024, the Brazilian Association of Technical Standards (ABNT) published a corrigendum standard ABNT NBR 11873:2021 Corrected Version: 2024 for Covered cables with polymeric material, voltage class 15 kV, 25 kV and 35 kV, for electrical overhead distribution lines.
The date of withdrawal of the superseded version was October 7, 2024.
Official sourceSafety, Performance
Mexico
Mexico SE Publishes Official Standard for Taps, Valves and Accessories for Hydraulic Installations for Drinking Water
On September 26, 2024, the Mexico Secretary of Economy (SE) published Mexican official standard NOM-012-CONAGUA-2021. This standard establishes specifications for taps, valves and accessories for hydraulic installations for drinking water.
This Mexican official standard will enter into force on September 26, 2025.
Official sourceSafety, Performance
India
India MNRE Releases Quality Control Order for Solar Thermal Systems, Devices and Components
On October 8, 2024, the Ministry of New and Renewable Energy (MNRE) released the Solar Thermal Systems, Devices and Components (Quality Control) Order, 2024, S.O. 4485(E). This Order states the reference for certification by the manufacturer and the enforcing authority.
The Order will come into force on April 6, 2025.
Official sourceSafety, Performance
India
India BIS Releases Draft Amendment to Standard for Instantaneous Domestic Water Heaters for Use with LPG - Specification
On October 9, 2024, the Bureau of Indian Standards (BIS) released draft Amendment No. 1 of IS 15558: 2024 for Instantaneous domestic water heaters for use with LPG - specification (first revision), to update performance requirements.
Comments and feedback were accepted until November 15, 2024.
Official sourceSafety, Performance
India
India BIS Releases Guidelines for Implementation of Revised Standard for Instantaneous Domestic Water Heater for Use with LPG - Specification
On August 12, 2024, the Bureau of Indian Standards (BIS) released guidelines for implementation of revised IS 15558 : 2024 for Instantaneous domestic water heater for use with LPG - specification (first revision), effective on the same day.
Official sourceSafety, Performance
India
India BIS Releases Guidelines for Implementation of Revised Standard for Drinking Water Coolers
On September 9, 2024, the Bureau of Indian Standards (BIS) released guidelines for the implementation of the revised IS 1475 : 2024 Drinking water coolers - specification (fourth revision), effective on the same day.
Official sourceSafety, Performance
Jordan
Jordan JSMO Publishes New Safety Standards for Electrical Equipment
On October 1, 2024, the Jordan Standards & Metrology Organization (JSMO) published several adopted Jordanian Standard Specifications which include battery charging controllers for photovoltaic systems, luminaires, motors and plugs and sockets for household use.
This standard will be effective on January 1, 2025.
Official sourceSafety, Performance, Sustainability
Brazil
Brazil INMETRO Amends Ordinance for Conformity Assessment Requirements for Three-Phase Squirrel Cage Induction Electric Motor
On September 27, 2024, the National Institute of Metrology, Quality and Technology (INMETRO) amended the Inmetro Ordinance No. 290 for conformity assessment requirements for a three-phase squirrel cage induction electric motor.
This notification is in conjunction with Inmetro Ordinance No. 290 issued in the Official Gazette of the Union on July 12, 2021.
Please contact your local UL Solutions office for more information.Sanitation
Brazil
Brazil ANVISA Publishes Draft Proposal for Food Contact Cellulose Film Sanitary Requirements
On September 23, 2024, the Brazil National Health Surveillance Agency (ANVISA) published Public Consultation No. 1280 of September 19, 2024, which is a proposal for a Resolution of the Collegiate Board - RDC, that provides for the sanitary requirements applicable to regenerated cellulose films intended to come into contact with food.
The measure aims to reduce production and commercialization barriers for films produced in MERCOSUR, following international normative references, as part of the harmonization process.
The feedback period was until November 14, 2024.
Official sourceSanitation;
Brazil
Brazil ANVISA Publishes Draft Establishing Lists of Substances Authorized For the Manufacture of Food Contact Cellulose Films
On September 23, 2024, the Brazil National Health Surveillance Agency (ANVISA) published Public Consultation No. 1281 of September 19, 2024, which is a Normative Instruction Proposal that establishes the positive lists of substances authorized for the manufacture of regenerated cellulose films intended to come into contact with food and their conditions of use.
The feedback period was until November 13, 2024.
Official sourceSanitation
Portugal
Portugal ERSAR Announces Upcoming Draft Regulation for the Approval System of Products in Contact with Water for Human Consumption
On September 30, 2024, the Portugal Water and Waste Services Regulatory Authority (Entidade Reguladora dos Servicos de Aguas e Residuos - ERSAR) announced the opening of the procedure for drafting the Regulation for the Approval System for Products in Contact with Water Intended for Human Consumption.
Comments were accepted until October 14, 2024.
Official sourceSanitation
Saudi Arabia
Saudi Arabia SASO Publishes Technical Guidelines for Food Safety for Kitchen Tools and Appliances
On August 19, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) published the Guide for Technical Regulations for Food Safety in Kitchen Tools and Equipment.
Please contact your local UL Solutions office for more information.Sanitation
India
India MoCF Publishes Amendment for EVA Copolymer Quality Control Order
On October 1, 2024, the Ministry of Chemicals and Fertilizers (MoCF) published an Order on Ethylene Vinyl Acetate Copolymers (Quality Control) Second Amendment 2024. This amends the Ethylene Vinyl Acetate Copolymers (Quality Control) Order 2022 and establishes a new date for the Order's implementation on October 3, 2025.
Official sourceSanitation
China
China NHC Publishes Safety Approval on Six New Food Contact Materials
On October 10, 2024, the National Health Commission (NHC) of the People’s Republic of China published a safety assessment approval for six new food contact materials, which include four additives with expanded usage, one new resin and one resin with expanded usage.
Official sourceSanitation
China
China CFSA Solicits Opinions on Three Food-Related Products
On October 25, 2024, the China National Center for Food Safety Risk Assessment (CFSA) of the People’s Republic of China solicited opinions on three new varieties of food contact products: one additive with expanded usage and two new resins.
The feedback period is until November 23, 2024.
Please contact your local UL Solutions office for more information.Sustainability
U.S., Colorado
U.S. Colorado CDPHE Announces Producers Subject to EPR Law Must Register to Circular Action Alliance (CAA)
On September 2024, the Colorado Department of Public Health and Environment (CDPHE) set a new deadline of October 1, 2024 for producers to register with Circular Action Alliance (CAA) under the Producer Responsibility Program for Statewide Recycling Act (HB 22-1355).
Official sourceSustainability
South Korea
South Korea Ministry of Environment Releases Proposal on Special Act on Reduction and Management of Microplastics
On September 4, 2024, the South Korean Ministry of Environment released a proposal entitled Special Act on Reduction and Management of Microplastics.
This Act establishes a comprehensive response system, including conducting on-site investigations on microplastics, regulating their use and emissions, and promoting reduction and removal technologies with the aim to protect national health and the environment from the hazards of microplastics.
Official sourceSustainability
France
France Ministry of Ecological Transition, Energy, Climate and Risk Prevention Publishes Notice Regarding Ban of Packaging Consisting Of Styrenic Polymers or Copolymers
On September 28, 2024, the France Ministry of Ecological Transition, Energy, Climate and Risk Prevention published a notice relating to the prohibition of packaging consisting in whole or in part of styrenic polymers or copolymers, which are not recyclable and are unable to be integrated into a production sector.
The notice serves as a postponement of the ban to align with future European Union's Packaging and Packaging Waste Regulation requirements which should apply beginning in 2030.
Official sourceSustainability
Australia
Australia NSW EPA Solicits Feedback on Proposal to Reduce Plastic Waste
On September 9, 2024, the Australia New South Wales Environment Protection Authority (NSW EPA) requested feedback on the actions and timeframes proposed in the action paper NSW Plastics: The Way Forward.
This plan proposes a wide range of measures, including a ban on single-use plastics, restrictions on harmful chemicals in food packaging, the introduction of performance evaluations for washing machines to reduce microfibers, and the gradual abolition of expanded polystyrene (EPS).
The public consultation concluded on November 4, 2024.
Official sourceSustainability
Laos
Laos MOIC Publishes Agreement on the Management of Green Label Products
On October 4, 2024, the Laos Ministry of Industry and Commerce (MOIC) published the Green Label Agreement. This agreement outlines principles, regulations and measures for managing green-label work, promoting environmentally friendly production, reducing pollution and managing waste to contribute to national economic and social development. It applies to green-label products in Laos on a voluntary basis.
The agreement took effect on November 18, 2024.
Official sourceSustainability
Australia
Australia NRE Tas Consulted on Plans to Phase Out Single-Use Plastics
On August 20, 2024, the Australia Department of Natural Resources and Environment Tasmania (NRE Tas) invited comments on the phasing out of problematic single-use plastics in Tasmania. The consultation seeks community input on the impact of restricting access to single-use plastic items on Tasmanians and suggests phasing them out over the next few years.
The public consultation concluded on October 1, 2024.
Official sourceSustainability
China
China SAMR Announces the Pilot Work of Product Carbon Footprint Labeling Certification
On August 30, 2024, the State Administration for Market Regulation (SAMR), Ministry of Ecology and Environment (MEE), National Development and Reform Commission (NDRC), and Ministry of Industry and Information Technology (MIIT) of the People’s Republic of China notified pilot work arrangement of product carbon footprint labeling certification. Pilot projects aim to explore the establishment of product carbon footprint labeling and certification system, collect best practices and contribute to the low-carbon transition of the industries.
Official sourceSustainability
U.S., California
U.S. - California CalRecycle Publishes Notice of Comment Period for Plastic Pollution Prevention Regulations
On October 14, 2024, the Department of Resources Recycling and Recovery (CalRecycle) opened a 15-day written comment period on SB 54 Plastic Pollution Prevention and Packaging Producer Responsibility Act Permanent Rulemaking.
CalRecycle will only consider written comments sent to CalRecycle and received during the 15-day written comment period, until November 4, 2024.
Official sourceSustainability
China
China SAMR Solicits Public Opinions on the Draft Green Product Certification and Labeling Measures
On October 9, 2024, the State Administration for Market Regulation (SAMR) of the People’s Republic of China solicited opinions on the Draft Measures for Green Product Certification and Labeling. The draft measures specify the requirements and responsibilities of different stakeholders of the certification system. It is also designed to regulate the certification implementation process and give requirements for green product labeling. Compared to the old version, self-declaration of compliance by producers is newly added as one of the approaches for green product compliance, in addition to third-party certification.
The deadline for feedback was October 23, 2024.
Official sourceSustainability, Chemicals
Australia
Australia DCCEEW Consults on Reforming Packaging Regulation
On September 27, 2024, the Australia Department of Climate Change, Energy, the Environment and Water (DCCEEW) solicited comments on the Reform of Packaging Regulation consultation paper.
The Australian Government is implementing reforms to reduce packaging waste and pollution, aiming to establish a circular economy. The reforms involve consulting stakeholders on various options, focusing on reducing waste, recycling and reusing used packaging.
The feedback period ended October 28, 2024.
Official sourceSustainability, Chemicals, Electrical and Electronic Waste, RoHS, Water Efficiency, Energy Efficiency
China
China SAC/SAMR Publishes Mandatory Standards for Household and Similar Electrical Appliances
On August 23, 2024, the Standardization Administration under the State Administration for Market Regulation (SAMR) of the People’s Republic of China published the national mandatory standard GB 44499-2024, Household and Similar Electrical Appliances—Energy Saving and Environment Protection Specification. This outlines energy-saving and environmentally friendly product requirements for household and similar electrical appliances in China, aiming to minimize resource and energy consumption, use less hazardous materials and reduce pollution generation and emission.
The standard will be implemented on September 1, 2026.
Official sourceSustainability, Energy Efficiency, Chemicals, Performance, Noise, Water Efficiency
EU
European Union EC Publishes Extensive Reference for Ecodesign for Sustainable Products Regulation (ESPR)
On September 25, 2024, the European Commission (EC) published the Ecodesign for Sustainable Products Regulation: Frequently Asked Questions (FAQ). This document addresses stakeholder questions about Regulation (EU) 2024/1781, which establishes a framework for setting ecodesign requirements for sustainable products. It is a preliminary view of the European Commission and aims to clarify the law, not stating an official EC position.
Official sourceWater Efficiency
Kuwait
Kuwait PAI Announces the Adoption of Gulf Technical Regulation for Water-Consumption Conservation Products
On September 26, 2024, the Public Authority for Industry (PAI) announced the adoption of the Gulf Technical Regulation for water-consumption conservation products (MC-230503-01). Water-consumption conservation products must fulfill the essential requirements set out in Annex (2) of this Technical Regulation.
Official sourceWireless
Hong Kong
Hong Kong OFCA Publishes Guideline on HKTEC Scheme (OFCA I 421 (24) Issue 8)
On August 26, 2024, the Office of the Communications Authority (OFCA) published the OFCA I 421(24) Issue 8 Hong Kong Telecommunications Equipment Evaluation and Certification (HKTEC) Scheme. It was effective on the same day.
Official sourceWireless
Hong Kong
Hong Kong OFCA Publishes Guideline on Applying for Type Approval or Acceptance of Radio Equipment (OFCA I 401 (24) Issue 33)
On August 26, 2024, the Office of the Communications Authority (OFCA) published the OFCA I 401(24) Issue 33 How to Apply for Type-approval or Type-acceptance of Radio Equipment. It was effective on the same day.
Official sourceWireless
Mexico
Mexico IFT Publishes Agreement that Establishes the Registry of Receiving Earth Stations Operating in the 3.7 to 4.2 GHz Frequency Band
On September 24, 2024, the Federal Telecommunications Institute (IFT) of Mexico published an Agreement by which the Plenary Session of the Federal Telecommunications Institute Establishes the Registry of Receiving Earth Stations that Operate in the 3.7 to 4.2 GHz Frequency Band, which will took effect on November 6, 2024.
Official sourceWireless
Panama
Panama ASEP Opens Public Consultation for Amendment of National Frequency Allocation Plan
On October 1, 2024, the National Authority for Public Services (ASEP) of Panama opened Public Consultation No.011-24 on the Proposal to Modify the National Frequency Allocation Plan (PNAF).
Official sourceWireless
Mexico
Mexico IFT Publishes Agreement that Modifies the Procedure for Requesting Authorization Certificates for the Secondary Use of Frequency Bands
On September 24, 2024, the Federal Telecommunications Institute (IFT) of Mexico published an Agreement by which the Plenary Session of the Federal Telecommunications Institute modifies the guidelines for the granting of the authorization certificate, for the use and exploitation of frequency bands of the radioelectric spectrum for secondary use. This Agreement also modifies the format for the presentation of the procedure for requesting an authorization certificate, for the use and exploitation of frequency bands of the radioelectric spectrum for secondary use, which took effect on September 25, 2024.
Official sourceWireless
Colombia
Colombia ANE Releases Draft Proposal Enabling the 6 GHz Band for Free Use Outdoors
On September 18, 2024, the National Spectrum Agency (ANE) published the regulatory proposal for Very Low Power (VLP) and Standard Power (SP) applications in the 6 GHz frequency band for unlicensed outdoor wireless access systems. This initiative seeks to encourage innovation, promote the use of new communications technologies and promote the deployment of telecommunications infrastructure.
Comments were accepted until October 9, 2024
Official sourceWireless
Trinidad & Tobago
Trinidad and Tobago TATT Opens First Round of Public Consultation on the Spectrum Plan for Non-Terrestrial Networks
On October 1, 2024, the Telecommunications Authority of Trinidad and Tobago (TATT) opened the first round of public consultation on the Spectrum Plan for the Accommodation of Non-Terrestrial Networks.
Comments were accepted until October 29, 2024.
Official sourceWireless
India
India Ministry of Communications Releases Format for Self-Declaration of Conformity for License-Exempt Wireless Equipment
On October 2, 2024, the Ministry of Communications released a format document for Self-Declaration of Conformity consistent with the previous notice, Issuance of Equipment Type Approval (ETA) for License-Exempt Wireless Equipment on TEC website.
Official sourceWireless
Mexico
Mexico IFT Publishes 2025 Program for the Use of Frequency Bands
On September 25, 2024, the Mexico Federal Telecommunications Institute (IFT) published an Agreement by which the Plenary Session of the Federal Telecommunications Institute issued the Annual Program for the Use and Utilization of Frequency Bands 2025 (PABF 2025).
Official sourceWireless
Argentina
Argentina ENACOM Expands the Capacity of Radio Communications Spectrum Bands
On September 12, 2024, the National Communications Agency (ENACOM) published Resolution 748/2024 for the expansion of the capacity of frequency bands for Digital Multichannel (MXD) systems. The focus is on those between 7110 and 7900 MHz, 8275 and 8500 MHz, 14.5 and 15.35 GHz, 21.2 and 23.6 GHz, 71 and 76 GHz and 81 and 86 GHz.
Official sourceWireless
Mexico
Mexico IFT Publishes Modification of Homologation and IFT Seal Guidelines for Telecommunications and Broadcasting Devices
On October 2, 2024, the Mexico Federal Telecommunications Institute (IFT) published the following documents:- Agreement by which the Plenary Session of the Federal Telecommunications Institute Modifies the Guidelines for the Approval of Products, Equipment, Devices or Apparatus Intended for Telecommunications or Broadcasting
- Agreement by which the Plenary Session of the Federal Telecommunications Institute Modifies the Various One by which the Guidelines for the Use of the IFT Seal on Approved Products, Equipment, Devices or Apparatus Intended for Telecommunications or Broadcasting are Issued.
Wireless
Brazil
Brazil ANATEL Opens Consultation on the Technical Compliance of Access Terminal Stations for 4G and 5G Networks and Mobile Satellite IoTs
On October 2, 2024, the National Telecommunications Agency (ANATEL) released Public Consultation No. 48 which proposes to update the requirements for assessing the technical compliance of Access Terminal Stations (ETA) type equipment. The updated proposal explores the use of the 5G Narrowband Non-Terrestrial Networks in addition to Category 1bis in 4G networks. This consultation aims to ensure the appropriate use of spectrum and product safety due to the growing needs of the market.
Comments will be accepted until December 9, 2024.
Official sourceWireless
Taiwan
Taiwan NCC Opens Public Consultation on the Abolition of 30 Regulations
On October 1, 2024, the National Communications Commission (NCC) of Taiwan opened a public consultation under Circular No. 11346009320 on the abolition of 30 regulations and technical specifications.
Comments will be accepted until December 2, 2024, and must be submitted to 10072402@ncc.gov.tw.
Official sourceWireless
Indonesia
Indonesia KOMINFO Releases Regulation Concerning the Designation of Testing Laboratories for Telecommunication Devices
On September 12, 2024, the Ministry of Communication and Information Technology of Indonesia (KOMINFO) released Regulation No. 5 of 2024 concerning the Designation of Testing Laboratory for Telecommunication Devices. This regulation contains the provisions and requirements for designating testing laboratories for certification purposes.
This Regulation came into force on September 18, 2024.
Official sourceWireless
Malaysia
Malaysia MCMC Opens Public Consultation on Roadmap for IPv6 Adoption and Migration
On October 2, 2024, the Malaysian Communications and Multimedia Commission (MCMC) opened a public consultation on the Public Consultation on the proposed way forward for 100% adoption of and complete migration to internet protocol version 6 (IPv6) in Malaysia.
Comments were accepted until October 31, 2024.
Official sourceWireless
Malaysia
Malaysia MCMC Opens Public Consultation on Technical Code for VoLTE System and Device Compatibility
On October 1, 2024, the Malaysian Communications and Multimedia Commission (MCMC) opened a public consultation on Technical Code - Voice Over LTE - System and Device Compatibility (MCMC MTSFB TC GXXX:XXXX).
Comments were accepted until October 31, 2024.
Official sourceWireless
Canada
Canada ISED Publishes Certification Requirements for License-Exempt Radio Local Area Network (RLAN) Devices Operating at 5925-7125 MHz Band
On October 11, 2024, the Department of Innovation, Science and Economic Development Canada (ISED) published RSS-248, Issue 3 - Radio Local Area Network (RLAN) Devices Operating in the 5925-7125 MHz Band.
This RSS 248, Issue 3 will become effective on April 11, 2025. Until then, applications for certification under either Issue 2 or Issue 3 will be accepted. After this date, only applications for certification under RSS-248, Issue 3 will be considered.
Official sourceWireless
Honduras
Honduras CONTEL Announces Draft Regulatory Update of the National Frequency Allocation Plan
On October 10, 2024, the National Telecommunications Commission (CONATEL) announced the consultation for the draft Update of the National Frequency Allocation Plan. This is the technical regulatory instrument that must optimize and rationalize the use of the radio spectrum for efficient supply of frequency needs for radiocommunication.
Comments were accepted until October 18, 2024.
Official sourceWireless
Brazil
Brazil ANATEL Announces Cellphones and 4G Technology ETA To Be Certified in 2025
On October 7, 2024, the National Telecommunications Agency of Brazil (ANATEL) released Act No. 14430, which established that only cell phones and access terminal stations that have at least 4G technology or higher may be certified by April 6, 2025. The objective is for devices to be compatible with the most modern networks (4G and 5G).
The Act does not indicate the shutdown of 2G and 3G networks as long as they also have 4G technology or higher.
Official sourceWireless
Brazil
Brazil ANATEL Announces Approval of the Guidelines for the Shared Use of 6 GHz Band at CITEL
On September 26, 2024, the National Telecommunications Agency of Brazil (ANATEL) announced the approval of the Recommendation Guidelines on the Technical and Operational Conditions for the use of WAS/RLAN in the 5925-7125 MHZ Frequency Range or Portions Thereof. This will enable the shared use of the band for WiFi and IMT applications for the 6GHZ band.
This was approved during the meeting of the Inter-American Telecommunications Commission (CITEL).
Official sourceWireless
Brazil
Brazil Anatel Releases Update for the List of Technical Requirements for Telecommunications Products (Category I)
On September 6, 2024, the National Telecommunications Agency of Brazil (ANATEL) updated the List of Technical Requirements for Telecommunications Products - Category I. Normative references for conformity of affected products are established.
Updates were effective upon the published date mentioned.
Official sourceWireless
Taiwan
Taiwan NCC Opens Public Consultation on the Abolition of 37 Regulations
On October 11, 2024, the National Communications Commission (NCC) of Taiwan opened a public consultation under Notice No. 11346009400 on the abolition of 37 regulations and technical specifications.
Comments will be accepted until December 10, 2024, and must be submitted to hsu928@ncc.gov.tw.
Official sourceWireless
Australia
Australia ACMA Opens Consultations for the Unacceptable Levels of Interference –1800 MHz Band
On October 3, 2024, the Australian Communications and Media Authority (ACMA) opened a consultation for the Variation to Radiocommunications (Unacceptable Levels of Interference – 1800 MHz Band) Determination 2023. This document will correct two drafting errors.
Comments were accepted until October 31, 2024.
Official sourceWireless
United Kingdom
United Kingdom - Northern Ireland DBT Publishes Draft Amendment of Radio Equipment Regulations
On October 10, 2024, the Department for Business and Trade of the United Kingdom published a draft of The Radio Equipment (Amendment) (Northern Ireland) Regulations 2024. Draft statutory instruments such as this require approval in Parliament before being signed into law.
Official sourceWireless
India
India TEC Issues Amendment for Changes of Clauses in MTCTE Procedure V3.0 (TEC 93009:2024)
On September 19, 2024, the Telecommunication Engineering Centre of India (TEC) released a notification on the Amendment of clauses in MTCTE Procedure v3.0 (TEC 93009:2024) to revise the Clause 5.4 and Note item (I) of Table A.2 of Annexure-A. This was effective on the notification date.
Official sourceWireless
Chile
Chile MTC Amends Technical Standard for the Use of Frequencies in the 173 MHz Frequency Band
On October 10, 2024, the Ministry of Transportation and Telecommunications (MTC) published Resolution 1737 Exempt. This modifies Resolution No. 2612 Exempt of 2009 which establishes a technical standard for the use of frequencies indicated in the 173 MHz frequency band.
The modifications will be mandatory starting April 10, 2025.
Please contact your local UL Solutions office for more information.Wireless
Thailand
Thailand NBTC Publishes Radio Frequency Plan for Digital Broadcasting Business
On September 16, 2024, the Office of the National Broadcasting and Telecommunications Commission (NBTC) published the Radio Frequency Plan Digital Broadcasting Business (NBTC No. 104-2567).
Official sourceWireless
Chile
Chile MTC Amends Minimum Technical Specifications that Digital Terrestrial Television Receivers Must Meet
On October 14, 2024, the Ministry of Transportation and Telecommunications (MTC) published Resolution No. 1814 Exempt. This modifies Resolution No. 7219 Exempt of 2009 which established the technical standard that establishes the minimum technical specifications that digital terrestrial television receivers must meet.
The modifications will be mandatory on March 17, 2025.
Official sourceWireless, Cyber Security
Burundi
Burundi ARCT Releases Law on the Electronic and Postal Communications Code
On August 22, 2024, the Telecommunications Regulation and Control Agency (ARCT) of Barundi released Law No. 1/22 of August 22 on the Code of Electronic and Postal Communications. This law establishes the rules applicable to electronic and postal communications activities in the national territory, including cybersecurity.
The law came into force the same day as the release mentioned above.
Official sourceWireless, EMC, Safety
Singapore
Singapore IMDA Opens Public Consultation on Revision of Technical Specifications for Cellular Base Station and Repeater System
On September 24, 2024, the Infocomm Media Development Authority (IMDA) of Singapore opened a public consultation on the draft Technical Specification Cellular Base Station and Repeater System (IMDA TS CBS Issue 1 Rev 4, xxx 2024).
Comments were accepted until October 8, 2024.
Official sourceWireless, EMC, Safety
India
India TEC Publishes Essential Requirements for Cellular Customer Premises Equipment
On August 1, 2024, the Telecommunications Engineering Centre (TEC) published the Essential Requirements Cellular Customer Premises Equipment (ER No.: TEC40012408) for the technical guide, which will be effective on the same day.
Official sourceWireless, EMC, Safety, Performance
India
India TEC Releases Latest List of Designated CABs
On October 3, 2024, the Telecommunications Engineering Centre (TEC) released the latest list of Conformity Assessment Bodies (CABs) for MTCTE. This list was effective on the same date.
Official sourceWireless, EMC, Safety
Singapore
Singapore IMDA Opens Public Consultation on Revision of Technical Specifications for Cellular Mobile Terminals
On September 24, 2024, the Infocomm Media Development Authority (IMDA) of Singapore opened a public consultation on the draft Technical Specification Cellular Mobile Terminal (IMDA TS CMT Issue 1 Rev 3, xxx 2024).
Comments were accepted until October 8, 2024.
Official sourceWireless, Safety, EMC
India
India TEC Publishes Essential Requirements for Fixed Wireless Phones
On September 1, 2024, the Telecommunications Engineering Centre (TEC) published the Essential Requirements Fixed Wireless Phone (ER No.: TEC10012409) for the technical guide, which was effective on the same day.
Official sourceWireless, Safety, EMC
India
India TEC Publishes Essential Requirements for Subscriber Management System
On September 1, 2024, the Telecommunications Engineering Centre (TEC) published the Essential Requirements for Subscriber Management System (ER No.: TEC30062409) for the technical guide, which was effective on the same day.
Official sourceWireless, Safety, EMC
India
India TEC Publishes Essential Requirements for Conditional Access System
On September 1, 2024, the Telecommunications Engineering Centre (TEC) published the Essential Requirements for Conditional Access System (ER No.: TEC30052409) for the technical guide, which was effective on the same day.
Official sourceWireless, Safety, EMC, Performance
India
India TEC Notifies Extension of Acceptance of ILAC Test Reports for List of Products Under MTCTE
On September 30, 2024, the Department of Telecommunications of the Telecommunications Engineering Centre (TEC) released F. No. 5-2/2024-TC/TEC, regarding the acceptance of ILAC test reports under MTCTE. This notification announces the acceptance of ILAC test reports from non-border sharing countries under MTCTE for a list of products that will be accepted till December 31, 2024.
Official sourceWireless, Safety, EMC, Performance
Tanzania
Tanzania TCRA Publishes Technical Specifications for Digital Audio Broadcasting Receivers
On July 17, 2024, the Tanzania Communications Regulatory Authority (TCRA) published the Minimum Technical Specifications for Digital Audio Broadcasting Receivers (TCRA/TS017, Version 1.0 - July 2024), which took effect on the same date.
Official source- September 2024 updates
Regulation
Country
Summary
Chemicals European Union EC Releases Regulation (EU) 2024/2865 amending Regulation (EC) No 1272/2008 on classification, labelling and packaging of substances and mixtures
On November 20, the European Commission (EC) has released Regulation (EU) 2024/2865 amending Regulation (EC) No 1272/2008 on classification, labelling and packaging of substances and mixtures.
This amendment modifies CLP Regulation, as follows:- Replacing of information for:
- Article 10 - Concentration limits, M-factors and acute toxicity estimates for classification of substances and mixtures
- Article 13 - Decision to classify substances and mixtures
- Article 30 - Updating information on labels
- Addition of Chapter 3 - Labelling formats
- Article 34a - Physical and digital labelling
- Article 34b - Requirements for digital labelling
Chemicals, Toys and Children's Products USA - Oregon USA: Oregon Drafts Notice of Proposed Rulemaking on Toxic Free Kids Modernization Act (HB 3043, 2023) and triennial review of High Priority Chemicals
The Oregon Health Authority is proposing to amend the administrative rules in chapter 333, division 16 related to the Toxic Free Kids Act.
The Toxic Free Kids (TFK) Program's charge is to maintain a list of high priority chemicals of concern for children's health. Manufacturers of children's products containing those chemicals must report those products to the Oregon Health Authority (OHA).
This rulemaking implements provisions of HB3043 and conducts triennial review of the High Priority Chemicals of Concern for Children's Health (HPCCCH) list. HB3043 requires manufacturers to report a children's product by its brand name and product model. OHA proposes to incorporate these requirements into TFK's reporting rule and add a definition for the term "product model."
Comments on this proposal shall be accepted until November 21, 2024.Electrical and Electronics EU EC Published Amendments on Directive on Waste Electrical and Electronic Equipment (WEEE)
The European Commission (EC) published Directive (EU) 2024/884 of the European Parliament and of the Council of 13 March 2024, amending Directive 2012/19/EU on waste electrical and electronic equipment (WEEE Directive).
This amendment modifies the WEEE Directive as follows:- It modifies marking requirements of EEE in art.14 and 15 of the WEEE Directive. The new reference standard for marking of electrical and electronic equipment shall be EN 50419:2022.
- It introduces art. 24a in the WEEE Directive regarding the future review of such Directive (not later than 31 December 2026).
- It modifies art.12 and 13 of WEEE Directive regarding the financing in respect of WEEE from private households and from users other than private households.
Juvenile Products USA U.S. CPSC Finalizes Rule on the Safety Standard for Soft Infant and Toddler Carriers
On November 20, the U.S. Consumer Product Safety Commission (CPSC) has finalized the rule on the Safety Standard for Soft Infant and Toddler Carriers.
The final rule specifies ASTM F2236-24 Standard Consumer Safety Specification for Soft Infant and Toddler Carriers as the mandatory standard. ASTM F2236-24 establishes performance requirements, test methods, and marking requirements to promote safe use of soft infant and toddler carriers.
A soft infant and toddler carrier is a product, normally of sewn fabric construction, which is designed to contain a full-term infant to a toddler, generally in an upright position, in close proximity to the caregiver.Toys and Children's Products USA U.S. CPSC Issues Notice of Proposed Rulemaking for Neck Floats
On November 20, the U.S. Consumer Product Safety Commission (CPSC) has issued a notice of proposed rulemaking (NPR) for the mandatory toy safety standards and requirements for neck floats.
The NPR proposes creating a new § 1250.5 to 16 CFR part 1250, Safety Standard Mandating ASTM F963 for Toys, with more stringent requirements by adding performance and labeling requirements for neck floats to further reduce the risk of injury associated with neck floats and to provide the highest level of safety for such products that is feasible.
Neck floats are aquatic toys that are typically ring-shaped tubes with discontinuous ends that wrap around a child’s neck.
Submit comments by January 21, 2025.Food Contact Materials USA USA Introduces H.R.9864 - Keep Food Containers Safe from PFAS Act of 2024
On September 27, the U.S. Congress has introduced H.R.9864 - Keep Food Containers Safe from PFAS Act of 2024.
This bill aims to amend the Section 301 of the Federal Food, Drug, and Cosmetic Act by adding a clause to prohibit the introduction or delivery for introduction into interstate commerce of food packaging containing intentionally added PFAS, and for other purposes.
The term ‘PFAS’ means a perfluoroalkyl substance or a polyfluoroalkyl substance that is man-made with at least 1 fully fluorinated carbon atom.”
If passed, the introduction of food packaging containing intentionally added PFAS onto the US market will be prohibited from January 1, 2025.Food Contact Materials Montenegro Montenegro Publishes Rulebook for Regenerated Cellulose Film Materials and Articles Intended to Come into Contact with Food
Montenegro published its rulebook for regenerated cellulose film materials and articles intended to come into contact with food, which transposes EU Directive 2007/42/EC on food contact regenerated cellulose films.
The Rulebook provides a definition for regenerated cellulose film and indicates that regenerated cellulose films under Articles 3(2)(1) and 3(2)(2) must be manufactured, with certain exceptions, using the substances or groups of substances in Appendix 1. This also prohibits the printed surfaces of the regenerated cellulose film to come into contact with food
This is established under the nation's legislation on food contact materials (OMG No. 80/2016) which also adopts EU's Regulation (EC) No.1935/2004 on food contact materials.Chemicals USA - California USA - California's OEHHA Mandates Warning Requirement for BPS Effective December 29, 2024
Effective December 29, 2024, the Office of Environmental Health Hazard Assessment (OEHHA) will mandate a warning requirement for significant exposures to bisphenol S (BPS). BPS was added to the Proposition 65 list as a reproductive toxicant (female reproductive endpoint) in 2023.
This listing was done via the “State’s Qualified Experts” mechanism, based on the Developmental and Reproductive Toxicant Identification Committee’s (DARTIC) determination that this chemical was clearly shown to cause female reproductive toxicity.
A complete, updated Proposition 65 chemical list is available on the OEHHA website.Chemicals EU ECHA Adds Triphenyl Phosphate to the SVHCs List under REACH Regulation
On November 7, the European Chemicals Agency (ECHA) has added triphenyl phosphate to the list of substances of very high concern (SVHCs) for its endocrine disrupting properties under Regulation (EC) No 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH).
This substance is registered under the REACH Regulation and is manufactured in and / or imported to the European Economic Area, at ≥ 100 tonnes per annum.
This substance is used by consumers, in articles, by professional workers (widespread uses), in formulation or re-packing, at industrial sites and in manufacturing. This substance is used in the following products: adhesives and sealants, coating products and cosmetics and personal care products.Chemicals, Hardlines New Zealand New Zealand Updates Maximum Allowable Levels of Lead Impurities in Paint
New Zealand's Environmental Protection Agency has issued Group Standards (Reducing Lead) Amendment Notice 2024 to update the maximum allowable lead levels in the paints, and update the element migration limits in graphic materials.
The key changes are to:- cut lead impurity limits in paints, including corrosion inhibitors
- require test results showing lead levels
- ensure all graphic materials marketed at children only fit the Graphic Materials Group Standard, which only allows products with no health risks
- cut the levels of migratable lead and other toxic elements in graphic materials marketed for children
- remove the need to give the EPA results of migratable element testing of graphic materials (to match other group standards and international regulators).
Juvenile Products USA U.S. CPSC Finalizes Rule on the Safety Standard for Infant Support Cushions
On November 4, the U.S. Consumer Product Safety Commission (CPSC) has finalized the rule on the Safety Standard for Infant Support Cushions to promulgate consumer product safety standards for durable infant or toddler products.
The final rule amends CPSC's consumer registration requirements to identify infant support cushions as durable infant or toddler products and amending CPSC's list of notices of requirements (NORs) to include infant support cushions.
Infant support cushions are products that support an infant for lounging, meaning reclining in a supine, prone, or recumbent position. Infant products within this category may or may not have perimeter sidewalls.Juvenile Products USA U.S. CPSC Finalizes Rule on the Safety Standard for Nursing Pillows
On October 25, the U.S. Consumer Product Safety Commission (CPSC) has finalized the rule on the Safety Standard for Nursing Pillows to establish mandatory performance and labeling requirements for nursing pillows.
The final rule specifies ASTM F3669—24, Standard Consumer Safety Specification for Nursing Pillows as the mandatory standard. This rule also amends its regulations regarding third party conformity assessment bodies, to include the safety standard for nursing pillows in the list of notices of requirements (NORs), along with identifying nursing pillows as a durable infant or toddler product subject to consumer registration requirements.Chemicals, Medical Devices USA - California USA - California Enacts Bill Prohibiting DEHP on Medical Devices
On September 25, the State of California has enacted AB 2300, Wilson. Medical devices: Di-(2-ethylhexyl) phthalate (DEHP).
This bill would, commencing January 1, 2030, prohibit a person or entity from manufacturing, selling, or distributing into commerce in the State of California certain intravenous solution containers made with intentionally added DEHP and shall not replace DEHP for revised or new products with other ortho-phthalates, as defined in the legislation.
Commencing January 1, 2035, the bill will prohibit a person or entity manufacturing, selling, or distributing into commerce in the State of California certain intravenous tubing made with intentionally added DEHP and shall not replace DEHP for revised or new products with other ortho-phthalates, as defined in the legislation.
Chemicals USA - California USA - California Enacts Bill Prohibiting Bisphenol on Any Juvenile’s Feeding Product
On September 29, the State of California has enacted SB-1266 Product safety: bisphenol.
This bill would, on and after January 1, 2026, prohibits any juvenile’s feeding product or juvenile’s sucking or teething product that contains any form of bisphenol above the practical quantitation limit (PQL), to be determined by the Department of Toxic Substances Control.
Existing law prohibits the manufacture, sale, or distribution in commerce of any bottle or cup that contains bisphenol A, as specified, if the bottle or cup is designed or intended to be filled with any liquid, food, or beverage intended primarily for consumption by children 3 years of age or younger.
The regulation defines juvenile as “an individual or individuals younger than 12 years of age”.Chemicals USA - California USA - California Enacts Bill on PFAS Testing and Enforcement relating to Consumer Protection
On September 29, the State of California has enacted AB-347 Household product safety: toxic substances: testing and enforcement.
This bill would require the Department of Toxic Substances Control, on or before January 1, 2029, to adopt regulations for the enforcement of those prohibitions on the use of PFAS, and, on and after July 1, 2030, to enforce and ensure compliance with those provisions and regulations, as provided.
Existing law prohibits juvenile products, textile articles, and food packaging that contain specified levels of perfluoroalkyl and polyfluoroalkyl substances (PFAS) from being distributed, sold, or offered for sale in the state.Artificial Intelligence
Taiwan
Taiwan NSTC Opens a Public Consultation on the Draft of Artificial Intelligence Basic Law
On July 15, 2024, the National Science and Technology Commission (NSTC) of Taiwan issued a public consultation for the draft Basic Law on Artificial Intelligence (Announcement of the National Science and Technology Commission Science and Technology Council No. 1130048999).
Comments were accepted until September 13, 2024.
Official sourceArtificial Intelligence
Australia
Australia NAIC Releases Voluntary AI Safety Standard
On September 5, 2024, the National Artificial Intelligence Centre of Australia published Voluntary AI Safety Standard. The voluntary standard gives practical guidance to all Australian organizations on how to safely and responsibly use and innovate with artificial intelligence (AI).
Official sourceArtificial Intelligence
Australia
Australia DISR Opens Public Consultation on a Proposal for Mandatory Guardrails for AI in High-Risk Settings
On September 5, 2024, the Department of Industry, Science and Resources (DISR) of Australia released a proposal on Introducing Mandatory Guardrails for AI in High-risk Settings. This proposal is open for consultation where comments are accepted until October 4, 2024.
Official sourceChemicals
Canada
Canada ECCC Publishes Updated National Implementation Plan for POPs under the Stockholm Convention
On August 1, 2024, the Canada Environment and Climate Change Canada (ECCC) published an update to Canada’s National Implementation Plan for Persistent Organic Pollutants under the Stockholm Convention. The publication aims to update the plan to implement obligations concerning five newly ratified listings of persistent organic pollutants (POPs) to the Stockholm Convention on Persistent Organic Pollutants for the Conference of the Parties and the public.
Official sourceChemicals
USA
USA EPA Publishes Risk Evaluation for Di-isononyl Phthalate (DINP)
On August 30, 2024, the Environmental Protection Agency (EPA) published Draft Risk Evaluation for Di-Isononyl Phthalate (DINP) (1,2-Benzene-dicarboxylic acid, 1,2- diisononyl ester). This includes risk evaluation findings, hazard assessment, background, uses, recent activities, and opportunities for public comment. The EPA will issue a final risk evaluation for DINP after considering public input and recommendations from the Science Advisory Committee on Chemicals (SACC) to determine the need for regulatory action.
Official sourceChemicals
USA
USA EPA Publishes Delay Reporting Requirements for PFAS under TSCA
On September 5, 2024, the Environmental Protection Agency (EPA) notified Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) Data Reporting and Recordkeeping Under the Toxic Substances Control Act (TSCA); Change to Submission Period and Technical Correction. EPA mandates any person that manufactures (including import) or have manufactured PFAS or PFAS-containing articles since January 1, 2011, to electronically report information on PFAS related to exposure and environmental and health effects, updating the data submission period to begin on July 11, 2025.
The rule, effective November 4, 2024, is subject to a withdrawal if adverse comments were received by October 7, 2024.
Official sourceChemicals
Japan
Japan METI Publishes Draft Cabinet Order for Partially Amending Enforcement Order of Mercury Pollution Prevention Law
On September 6, 2024, the Japan Ministry of Economy, Trade and Industry (METI) and the Ministry of Environment (MOE) solicited comments on the draft cabinet order partially amending the Enforcement Order of the Act on Prevention of Environmental Pollution by Mercury, adding products in specified mercury-containing products and related implementation measures.
The feedback period was until October 7, 2024.
Official sourceChemicals
EU
European Union ECHA Publishes Proposals to Add Six Substances to Substances of Very High Concern (SVHC) List
On August 30, 2024, the European Chemicals Agency (ECHA) published six proposals to identify new substances of very high concern (SVHCs). This includes perfluamine, which is used to manufacture electrical, electronic, and optical equipment, as well as machinery and vehicles.
The feedback period is until October 14, 2024.
Official sourceChemicals
South Korea
South Korea Ministry of Environment Publishes Administrative Notice of the Draft Revision of the Regulation on Types of Persistent Pollutants and Specific Exemptions
On September 4, 2024, the Ministry of Environment published Notice No. 2024-571: Administrative Notice of the Draft Revision of the Regulation on Types of Persistent Pollutants and Specific Exemptions. This draft provides the detailed chemical name and identification number of which was omitted, and also clarifies the wording of the specific exemption regulations and deadlines. The public consultation ended on September 23, 2024.
Official sourceChemicals
India
India Chemexcil Seeks Inputs on Assessment and Financial Mechanism Questionnaire for Stockholm Convention
On August 12, 2024, the India Basic Chemicals, Cosmetics & Dyes Export Promotion Council (Chemexcil), which was set up by the Ministry of Commerce and Industry, Government of India, solicited inputs from member companies on the quantity and financial assessment for implementing the Stockholm Convention regarding use, disposal, reduction and supporting measures of POPs listed under the Convention for elimination, restriction, and unintentional production. This questionnaire aims to understand the current situations of companies in preparation for future regulatory enforcement.
The survey ended on August 14, 2024.
Official sourceChemicals
USA
USA EPA Publishes Draft Risk Evaluation Under the Toxic Substances Control Act (TSCA) to Request Comments for Di-isononyl Phthalate (DINP)
On September 3, 2024, the Environmental Protection Agency (EPA) published a notice on announcing the availability of and seeking public comment on a draft risk evaluation under the Toxic Substances Control Act (TSCA) for di-isononyl phthalate (DINP) (1,2-Benzene- dicarboxylic acid, 1,2- diisononyl ester) (CASRN
28553-12-0).
Comments must be received on or before November 4, 2024, identified by docket identification (ID) number EPA–HQ–OPPT–2018–0436, online at https://www.regulations.gov.
Official sourceChemicals
China
China MEE Solicits Comments on Quota Setting and Allocation for ODS and HFCs in 2025
On September 14, 2024, the Ministry of Ecology and Environment (MEE) of the People’s Republic of China solicited comments on the setting and allocation plan of total quotas for ozone-depleting substances (ODS) and hydrofluorocarbons (HFCs) in 2025.
The feedback period was until September 23, 2024.
Official sourceChemicals
Japan
Japan MHLW, METI and MOE Publish Draft Revision of the Enforcement Order of the Act on the Regulation of Manufacture and Evaluation of Chemical Substances
On September 19, 2024, the Japan Ministry of Health, Labour and Welfare (MHLW), Ministry of Economy, Trade and Industry (METI) and Ministry of the Environment (MOE) published a draft Revision of the Enforcement Order of the Act on the Regulation of Manufacture and Evaluation of Chemical Substances. The draft proposed to add Methoxychlor, Dechlorane Plus, and UV-328 as Class I Specified Chemical Substances through the WTO website.
The final date of comment is November 18, 2024.
Official sourceChemicals, Performance
EU
European Union CENELEC Publishes New Standard EN IEC 61960-4:2024 - Coin Secondary Lithium Cells, and Batteries for Portable Applications
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61960-4:2024 for secondary cells and batteries containing alkaline or other non-acid electrolytes - secondary lithium cells and batteries for portable applications: coin secondary lithium cells, and batteries made from them.
The date of withdrawal of superseded version was September 3, 2027.
Official sourceChemicals, REACH
Switzerland
Switzerland Federal Office of Public Health Publishes Amendment to Ordinance on Protection Against Dangerous Substances and Preparations (Chemicals Ordinance - ChemO)
On August 6, 2024, the Federal Office of Public Health of Switzerland published an amendment to Ordinance on Protection against Dangerous Substances and Preparations (Chemicals Ordinance - ChemO).
This amendment entered into force on September 1, 2024.
Official sourceChemicals, Sanitation
EU
European Union EC Publishes Regulation Amending REACH Regulation Restrictions as Regards PFHxA, Its Salts and Related Substances
On September 20, 2024, the European Commission (EC) published Commission Regulation (EU) 2024/2462 in the Official Journal of the European Union. This amends Annex XVII to Regulation (EC) No. 1907/2006 of the European Parliament and of the Council as regards undecafluorohexanoic acid (PFHxA), its salts, and PFHxA-related substances.
The PFHxA ban targets usage with insufficient risk control, viable alternatives, and low socioeconomic costs. It prohibits use in consumer textiles, paper and cardboard used as food contact materials, cosmetics, and firefighting foam applications without compromising safety, and does not affect other applications.
This Regulation entered into force on October 10, 2024, and be binding in its entirety and directly applicable in all Member States.
Official sourceCyber Security
Vietnam
Vietnam MPS Opens a Public Consultation on Standard for Cyber Security for Information Systems of National Security Importance
On August 6, 2024, the Ministry of Public Security (MPS) of Vietnam opened a public consultation on National Standards on Cyber Security for Information Systems Important to National Security.
Comments were accepted until October 6, 2024.Cyber Security
Singapore
Singapore CSA Updates Operational Technology Cybersecurity Masterplan
On August 20, 2024, the Cyber Security Agency of Singapore (CSA) published the Operational Technology Cybersecurity Masterplan 2024, which outlines Singapore's plans to boost the technical cybersecurity capabilities and competencies of its operational technology sector.
Official sourceCyber Security
Malaysia
Malaysia NACSA Publishes 4 Cyber Security Regulations
On August 22, 2024, the National Cyber Security Agency (NACSA) of Malaysia published the following regulations under the Cyber Security Act 2024 (Act 854):
- Cyber Security (Period for Cyber Security Risk Assessment and Audit) Regulations 2024 (P.U. (A) 219)
- Cyber Security (Notification of Cyber Security Incident) Regulations 2024 (P.U. (A) 220)
- Cyber Security (Licensing of Cyber Security Service Provider) Regulations 2024 (P.U. (A) 221)
- Cyber Security (Compounding of Offences) Regulations 2024 (P.U. (A) 222)
These regulations, along with the Cyber Security Act 2024, took effect on August 26, 2024.
Official sourceCyber Security
China
China MIIT Publishes a Guideline for the Construction of the Internet of Things Standard System 2024
On July 22, 2024, the National Standardization Administration of the Ministry of Industry and Information Technology published a notice (MIIT No. 206 of 2024) on the issuance of the Guidelines for the Construction of the Internet of Things Standard System (2024 Edition). This document will strengthen the top-level design of standard work, and lead the high-quality development of the Internet of Things industry.
Official sourceCyber Security
China
China TC260 Publishes a Notice for the Public Consultation of Draft Cybersecurity Standard on Network Virtualization Security
On August 29, 2024, the National Technical Committee 260 on Cybersecurity of Standardization Administration of China (TC260) published a draft standard Cybersecurity Technology Cybersecurity Part 7: Network Virtualization Security for comments for the public consultation. This document aims to identify network virtualization security risks and provide guidance for the secure implementation of network virtualization.
Comments are accepted until October 28, 2024.
Official sourceCyber Security
India
India Ministry of Communications Publishes Notification on the Draft Telecommunications (Telecom Cyber Security) Rules, 2024
On August 30, 2024, the Ministry of Communications of India published draft Telecommunications (Telecom Cyber Security) Rules, 2024 on its official gazette for the public consultation, which issued on August 28, 2024.
Comments or suggestions were accepted until September 27, 2024.
Official sourceCyber Security
New Zealand
New Zealand GCSB Publishes Updated Information Security Manual
On September 5, 2024, the Government Communications Security Bureau (GCSB) of New Zealand published the New Zealand Information Security Manual (NZISM) Version 3.8, which sets out the processes and controls essential for the protection of all New Zealand Government information and systems.
Official sourceCyber Security
Uruguay
Uruguay AGESIC Opens a Public Consultation on National Cybersecurity Strategy
On September 9, 2024, the Agency for Electronic Government and the Information and Knowledge Society (AGESIC) of Uruguay opened a public consultation on the draft of National Cybersecurity Strategy of Uruguay 2024-2030.
Comments were accepted until September 23, 2024.
Official sourceCyber Security
Malaysia
Malaysia NACSA Publishes Instructions for Cyber Security Incident Notification and Licensing of Cyber Security Service Providers
On August 22, 2024, the National Cyber Security Agency (NACSA) of Malaysia published the following instructions under the Cyber Security Act 2024 (Act 854).
- Cyber Security Incident Notification (Instruction No. 1 Year 2024)
- Licensing of Cyber Security Service Providers (Instruction No. 2 Year 2024)
These took effect on August 26, 2024.
Official sourceCyber Security, Artificial Intelligence
EU
European Union CEN Publishes New Standards EN ISO/IEC 25059 and EN ISO/IEC 27005 for AI and CyberSecurity
On August 1, 2024, the European Committee for Standardization (CEN) published the following standards:
- EN ISO/IEC 27005:2024 - Information security, cybersecurity and privacy protection - Guidance on managing information security risks
- EN ISO/IEC 25059:2024 - Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Quality model for AI systems
The standards provide further guidance in regulating the advancements in the field of AI and Cybersecurity.
Official sourceElectrical and Electronic Waste
India
India MoEFCC Publishes Draft EPR Regulations for Waste Non-Ferrous Metals
On August 14, 2024, the India Ministry of Environment, Forest and Climate Change (MoEFCC) published a draft regulation for Extended Producer Responsibility (EPR) for waste non-ferrous metals, which will be under the Hazardous and other Wastes (Management and Transboundary Movement) Second Amendment Rules, 2024. This aims to promote non-ferrous metal recycling and thus a formal and well-organized recycling ecosystem. The feedback period is until October 13, 2024.
Official sourceElectrical and Electronic Waste
Chile
Chile Chamber of Deputies Approves Bill that Establishes a Universal Charger
On August 26, 2024, the Chamber of Deputies approved a bill establishing a universal and standard charger for various devices like cell phones, tablets, and portable consoles.
Official sourceElectrical and Electronic Waste
Japan
Japan MOE Solicits Comments on Draft Amendment to Ministerial Ordinance on the Scope of Specified Hazardous Waste Based on the Import and Export Control Law of Hazardous Waste
On August 24, 2024, the Ministry of the Environment, Government of Japan solicited comments on the Draft Amendment to Ministerial Ordinance on the Scope of Specified Hazardous Waste Based on the Import and Export Control Law of Hazardous Waste. The draft responds to the amendment of Basel Convention in 2022 regarding the scope of e-waste transboundary movements control.The deadline for comment submission was September 23, 2024.
Official sourceElectrical and Electronic Waste
Japan
Japan MOE Solicits Comments on Draft Regulation on Applicability of WEEE to Import and Export Control in Basel Convention
On August 24, 2024, the Ministry of the Environment, Government of Japan, solicited comments on the draft Regulation on Applicability of Waste Electrical and Electronic Equipment to Import and Export Control in Basel Convention.The deadline for comment submission was September 23, 2024.
Official sourceEMC
EAEU
EAEU EEC Issues Amendment to Decision No. 77 of June 29, 2021 on EMC List of Standards
On July 9, 2024, the Eurasian Economic Commission (EEC) signed the Decision No. 79 which amends the lists of standards for technical regulations for Electromagnetic Compatibility EMC (TR CU 020/2011).
Decision No. 79 will come into effect 180 calendar days after the date of its official publication, which is January 8, 2025.
Official sourceEMC
Taiwan
Taiwan BSMI Publishes Updated List of Recognized EMC Testing Laboratories in Foreign Countries (September 3, 2024 Update)
On September 3, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) published List of EMC Testing Laboratories Recognized by the BSMI in Foreign Countries to update the list of the latest version.
Official sourceEMC
EU
European Union CENELEC Publishes New Standard EN IEC 61000-2-4:2024 - Electromagnetic Compatibility (EMC) in Power Distribution Systems
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61000-2-4:2024 for electromagnetic compatibility (EMC): environment - compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances.
The date of withdrawal of superseded version is August 29, 2027.
Official sourceEMC, Energy Efficiency, RoHS, Safety, Chemicals
Taiwan
Taiwan BSMI Publishes Latest Certification Information Booklet Version 1.85
On August 26, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) published the latest version 1.85 of the Taiwan Commodity Inspection Schemes for Electrical and Electronic Products (Conformity Assessment) Information Booklet. It aims to inform interested parties about the updated inspection requirements and C.C.C. Codes of regulated electrical and electronic equipment for BSMI certification.
Official sourceEMC, Performance, Safety
Global, CB Scheme
IECEE Adds New Equipment List on Week 38 (2024-W38)
On September 20, 2024, new testing equipment list was published and replaced to the IECEE Website.
Official sourceEMC, RoHS, Safety, Performance, Chemicals
Taiwan
Taiwan BSMI, MOEA Issue Draft Regulation for Mandatory BSMI Certification Requirements of Power Conversion System
On August 13, 2024, the Bureau of Standards, Metrology and Inspection (BSMI), Ministry of Economic Affairs (MOEA) published draft Legal Inspection Requirements for Power Conversion System to plan to include power conversion system into the BSMI certification scope for public comments until October 14, 2024.
The draft document was published on the BSMI website on August 26, 2024.
Contacts for comments or suggestions:
Bureau of Standards, Metrology and Inspection, Ministry of Economic Affairs
No. 4, Sec. 1, Jinan Rd. Zhongzheng District, Taipei City
Tel.: (886-2) 2343-1784
Fax: (886-2) 3343-3991
Email: mg.lee@bsmi.gov.tw
Official sourceEMC, Safety
Israel
Israel MEI Publishes Guidelines and Instructions for Import of Goods to Which an Official Standard Applies
On August 27, 2024, the Ministry of Economy and Industry (MEI) published guidelines and instructions of the commissioner for standardization regarding the import of goods to which an official standard applies effective on the same day.
Official sourceEMC, Safety
Global, CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 35 (2024-W35)
On August 30, 2024, new TRFs were published and added to the IECEE website.
Official sourceEMC, Safety
Ukraine
Ukraine Cabinet of Ministers Adopts of Resolution on the Amendment of Certain Resolutions on Technical Regulations
On July 23, 2024, the Cabinet of Ministers of Ukraine notifies the adoption of the Resolution of the Cabinet of Ministers of Ukraine No. 846 on Amendments to Certain Resolutions of the Cabinet of Ministers of Ukraine regarding Technical Regulation.
This resolution enters into force six months after its publication (January 25, 2025). The Resolution No. 1184 on conformity marking enters into force simultaneously with the entry into force of the agreement between Ukraine and the European Union on conformity assessment and acceptability of industrial products.
Please contact your local UL Solutions office for more information.EMC, Wireless
Canada
Canada ISED Publishes Technical Requirements Applicable to Wireless Power Transfer Devices
On September 3, 2024, the Department of Innovation, Science and Economic Development Canada (ISED) published RSS-216, Issue 3, Wireless Power Transfer Devices.
This RSS 216, Issue 3 became effective on September 3, 2025. Until then, applications for certification under either Issue 2 or Issue 3 will be accepted. After this date, only applications for certification under RSS-216, Issue 3 will be considered.
Official sourceEMC, Wireless
Canada
Canada ISED Publishes Draft Adoption of ANSI C63.2-2023 and ANSI C63.10a-2024
On September 20, 2024, the Innovation, Science and Economic Development Canada (ISED) opened a public consultation on the following standards:
- ANSI C63.2-2023, American National Standard for Specifications of Electromagnetic Interference and Field Strength Measuring Instrumentation in the Frequency Range 9 kHz to 40 GHz
- ANSI C63.10a-2024, American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices, Amendment 1
Comments are accepted until November 29, 2024, and can be submitted to consultationradiostandards-consultationnormesradio@ised-isde.gc.ca.
Official sourceEnergy Efficiency
USA
USA EPA Releases a Public Notice for the Energy Star Version 6.0 Dehumidifier Final Specification
On August 21, 2024, the US Environmental Protection Agency (EPA) and US Department of Energy (DOE) released Energy Star Version 6.0 Dehumidifier Final Specification Cover Letter.
Official sourceEnergy Efficiency
South Korea
South Korea MOTIE Publishes Partial Revision of Efficiency Management Equipment Operation Regulations
On July 15, 2024, the South Korea Ministry of Trade, Industry and Energy published partial revision of Efficiency Management Equipment Operation Regulations (MOTIE Notice No. 2024-120) and was effective on the same day.
Official sourceEnergy Efficiency
Ukraine
Ukraine Government Approves a New Technical Regulation on the Eco-Design of Electronic Displays
On August 20, 2024, the Government approved a new technical regulation on the eco-design of electronic displays. The decision aims to enhance energy and environmental performance by establishing eco-design requirements for electronic displays like televisions, monitors, and digital information displays.
Official sourceEnergy Efficiency
United Arab Emirates
UAE MoIAT Publishes Draft Standard UAE.s 5010-5:2024 - Energy Efficiency Label for Large Capacity Air Conditioners
On August 22, 2024, the Ministry of Industry and Advanced Technology (MoIAT) published draft standard UAE.S 5010-5:2024 for Labeling – Energy Efficiency Label for Electrical Appliances - Part 5: Large Capacity Air Conditioners. UAE.S 5010-5:2024 is the latest standard version, which took into consideration the comments and feedback obtained when its earlier Draft version was circulated on December 25, 2023.
Comments and feedback for this new draft standard can be submitted until October 21, 2024.
Official sourceEnergy Efficiency
United Arab Emirates
UAE MoIAT Publishes Draft Standard UAE.S 5010-1:2024 - Energy Efficiency Label for Low-Capacity Air Conditioners
On August 22, 2024, the Ministry of Industry and Advanced Technology (MoIAT) published draft standard UAE.S 5010-1:2024 for Labeling–Energy Efficiency Label for Electrical Appliances Part 1: Low-Capacity Air Conditioners. UAE.S 5010-1:2024 is the latest standard version, which already took into consideration the comments and feedback obtained when its earlier draft version was circulated on Sept. 13, 2023.
Comments and feedback for this new draft standard can be submitted until October 21, 2024.
Official sourceEnergy Efficiency
Turkey
Turkey MoIT Issues Corrigendum to Communiqué on Energy Labelling of Cooling Devices with Direct Sales Function (SGM:2021/10) (2019/2018/EU)
On August 19, 2024, the Turkey's Ministry of Industry and Technology (MoIT) notified the Amendment to the Communique on Energy Labeling of Cooling Devices with Direct Sales Function (SGM:2021/10) (2019/2018/EU) published on March 25, 2021, and numbered 31434 in the official gazette.
The amendment took effect on August 19, 2024.
Official sourceEnergy Efficiency
Nicaragua
Nicaragua MIFIC Publishes Draft Energy Efficiency Standard for Additional Conformity Assessment for Household Refrigerating Appliances - NTON 04002
On August 23, 2024, the Ministry of Development, Industry and Trade, through the Direction of Standardization and Metrology (DNM) published Nicaraguan Mandatory Technical Standard NTON 04002. This standard establishes the procedure for demonstrating the conformity of products regulated in RTCA 97.01.81:22 (Technical Regulation for Energy Efficiency Specifications of Refrigerators and Freezers Appliances).
The final date for the submission of comments was September 25, 2024.
Official sourceEnergy Efficiency
Nicaragua
Nicaragua MIFIC Publishes Draft Addendum 1 of Additional Conformity Assessment for the Energy Efficiency Standard for Air Conditioners - NTON 04001
On August 23, 2024, the Ministry of Development, Industry and Trade, through the Direction of Standardization and Metrology (DNM) published Nicaraguan Mandatory Technical Standard NTON 04001 first addendum. This standard establishes the procedure for demonstrating the conformity of products regulated in RTCA 23.01.78:20 (Technical Regulation for Energy Efficiency Specifications of Inverter Split-type, Free Air Discharge, Non-ducted Air Conditioners with Variable Refrigerant Flow).
The final date for the submission of comments was September 25, 2024.
Official sourceEnergy Efficiency
South Korea
South Korea MOTIE Publishes Draft on Partial Revision of the Enforcement Regulations of the Energy Use Rationalization Act
On August 28, 2024, the Energy Efficiency Division of the Ministry of Trade, Industry and Energy (MOTIE) of South Korea published draft Notice No. 2024-633 to hear opinions from public regarding the partial revision of the Enforcement Decree of the Energy Utilization Rationalization Act.
Anyone who wants to express their opinions regarding this amendment were requested to submit a written letter to the Division by Friday, October 11, 2024.
Official sourceEnergy Efficiency
USA
USA EPA Releases a Public Notice for the Laboratory Grade Refrigerators and Freezers Version 2.0 Final Draft Specification
On August 29, 2024, the US Environmental Protection Agency (EPA) released the version 2.0 final draft for laboratory grade refrigerators and freezers. The EPA is set to finalize Version 2.0 Laboratory Grade Refrigeration and Freezers specification by June 30, 2025, comments were submitted to the EPA no later than September 13, 2024.
Official sourceEnergy Efficiency
USA
USA EPA Releases a Public Notice for the Energy Star Version 1.0 of Packaged Terminal Heat Pump Specifications
On August 29, 2024, the US Environmental Protection Agency (EPA) released draft 1 of the Energy Star Version 1.0 of packaged terminal heat pump specification. The EPA was set to conduct a comprehensive public webinar on September 12, 2024, at 1 PM ET, to delve deeper into the details of Draft 1. The EPA invited the public to submit comments on this draft proposal no later than September 30, 2024.
Official sourceEnergy Efficiency
Australia, New Zealand
Australia DCCEEW Publishes a Public Consultation Paper on Comparison Methodology for Residential Space Heaters
On August 28, 2024, the Department of Climate Change, Energy, the Environment and Water (DCCEEW) published a public consultation paper on comparison methodology for residential space heaters. The purpose of this consultation document is to provide information on the proposed space heating comparison methodology and provide a basis for seeking submissions from industry and other stakeholders on the proposed methodology.
The closing date for comments was September 27, 2024.
Official sourceEnergy Efficiency
India
India BEE Releases Draft Regulation on Particulars and Manner of their Display for Electric Ceiling Type Fans
On September 3, 2024, the Bureau of Energy Efficiency (BEE) released an advisory regarding pre-published amendment regulations for electric ceiling type fans.
Comments and feedback were accepted until September 28, 2024.
Official sourceEnergy Efficiency
Ukraine
Ukraine Government Publishes Technical Regulation on the Eco-Design of Electric Motors and Variable Speed Drives
On July 23, 2024, the Government published a resolution on the approval of the technical regulation on the eco-design requirements for electric motors and variable speed drives. The decision aims to enhance energy and environmental performance by establishing eco-design requirements for electric motors and variable speed drives.
Official sourceEnergy Efficiency
Ukraine
Ukraine Government Publishes Technical Regulation on the Eco-Design of Welding Equipment
On July 23, 2024, the Government published a resolution on the approval of the technical regulation on eco-design requirements for welding equipment. The decision aims to enhance energy and environmental performance by establishing eco-design requirements for welding equipment.
Official sourceEnergy Efficiency
Taiwan
Taiwan EA Issues Revised Energy Efficiency Requirements for Energy Saving Label of Indoor Luminaires
On September 4, 2024, the Energy Administration (EA) of the Ministry of Economic Affairs (MOEA) issued Order No. 11304005780 for the revision of Energy Efficiency Criteria and Labeling Methods for Energy Saving Labels of Indoor Luminaires (former name: Energy Conservation Labeling Program Requirements for Luminaires) which will be effective on the same day.
Official sourceEnergy Efficiency
USA
USA DOE Publishes Proposed Rules for the Energy Conservation Standards for Commercial Refrigerators, Freezers, and Refrigerator-Freezers
On August 28, 2024, the US Department of Energy (DOE) published proposed rules for the energy conservation standards for commercial refrigerators, freezers and refrigerators-freezers.
DOE accepted comments, data, and information regarding this NODA no later than September 27, 2024.
Official sourceEnergy Efficiency
Taiwan
Taiwan EA Issues Energy Efficiency Requirements for Energy Saving Label of Unshielded Luminaires
On September 4, 2024, the Energy Administration (EA) of the Ministry of Economic Affairs (MOEA) issued Regulation No. 11304006060 for the Energy Efficiency Criteria and Labeling Methods for Energy Saving Labels of Unshielded luminaires which was effective on the same day.
Official sourceEnergy Efficiency
Guatemala
Guatemala MEM Adopts Central American Technical Regulation for the Energy Efficiency of Fixed Split-type, Free Discharge, Ductless Air Conditioners
On August 28, 2024, the Ministry of Energy and Mines adopts Central American technical regulation RTCA 23.01.80: 21. This technical regulation deals with the energy efficiency specifications of electrical products particular for split-type, free discharge, ductless air conditioners.
Official sourceEnergy Efficiency
Honduras
Honduras Ministry of Energy Issues Reminder Regarding the Deadlines for Submission of Opinions for the Energy Efficiency of Refrigerating and Air Conditioning Equipment
The Ministry of Energy through the General Directorate of Renewable Energy and Energy Efficiency (DGER) issued a reminder regarding the deadlines for submission of opinions in accordance with Circulars 002-2024-SEN-DGEREE and 003-2024-SEN-DGEREE sent in May 2024.
Please contact your local UL Solutions office for more information.Energy Efficiency
South Korea
South Korea MOTIE Announces a Draft Intended to Revise the Regulations on the Promotion of Distribution of High-Efficiency Energy Equipment
On September 2, 2024, the South Korean Ministry of Trade, Industry and Energy (MOTIE) opened a public consultation regarding the revision of Regulations on the Promotion of Distribution of High-Efficiency Energy Equipment through MOTIE Notice No. 599.
Comments whether for or against the revision were accepted until September 20, 2024.
Official sourceEnergy Efficiency
China
China CNIS Publishes a Consultation for Draft Standard on Energy Efficiency Limits and Energy Efficiency Grades of LED Lamps for Road and Tunnel Lighting (GB 37478-202X)
On September 6, 2024, the China National Institute of Standardization (CNIS) issued a draft national standard for Energy Efficiency Limits and Energy Efficiency Grades of LED lamps for road and tunnel lighting (GB 37478-202X) for solicitation of comments.
Relevant experts can review the draft, provide comments and suggestions by filling out the feedback form, and submit it via email to the contacts below by November 15, 2024.
Contact information:
Liang Xiuying, Tel: 010-58811789, E-mail: liangxy@cnis.ac.cn
Official sourceEnergy Efficiency
Australia
Australia ECMC Agrees to Update Minimum Energy Performance Standards to Phase Out a Range of Light Bulbs
On July 19, 2024, the Energy and Climate Change Ministerial Council (ECMC) agreed to update Minimum Energy Performance Standards to phase out a range of incandescent lamps and to remove a determination covering ballast for fluorescent lamps, and another covering transformers and electric step-down converters for Extra Low Voltage (ELV) halogen lamps.
Official sourceEnergy Efficiency
Costa Rica
Costa Rica MINAE Releases a Public Consultation for the Application of Energy Efficiency Specifications of Refrigerators and Freezers Appliances (RTCA 97.01.81:22)
On September 6, 2024, the Ministry of Environment and Energy (MINAE) submitted to the institutions and the general public a draft regulation Complementary Regulation for the Application of RTCA 97.01.81.22, Electrical Products, Household Appliance Refrigerators and Freezers, Energy Efficiency Specifications.
The public hearing due date was September 20, 2024.
Official sourceEnergy Efficiency
Mexico
Mexico CONUEE Publishes Notification for the Inclusion of Three Energy Efficiency Standards in the NOM Agreement
On September 10, 2024, the National Commission for the Efficient Use of Energy (CONUEE) published a notification regarding the three official Mexican standards for energy efficiency that are included in the NOM Agreement.
- NOM-012-ENER-2019
- NOM-003-ENER-2021
- NOM-027-ENER/SCFI-2018
Official sourceEnergy Efficiency
China
China CNIS Publishes a Consultation for Draft Standard on Energy Efficiency Limits and Energy Efficiency Grades for Microcomputers (GB 28380-XXXX)
On September 14, 2024, the China National Institute of Standardization (CNIS) published a draft mandatory national standard related to the minimum allowable values of energy efficiency and energy efficiency grades of microcomputers.
Comments and revision opinions were accepted until September 28, 2024.
Official sourceEnergy Efficiency
Thailand
Thailand MIND Announces New Energy Efficiency Standard for Sausage Warmers (TIS 3674-2567)
On September 7, 2024, the Ministry of Industry of Thailand announced the establishment of TIS 3674-2567 (2024), titled Sausage Warmer: Energy Efficiency Requirements as an industrial product standard.
This announcement took effect on September 8, 2024.
Official sourceEnergy Efficiency
Morocco
Morocco MoIT Issues Decree for Mandatory Minimum Energy Performance of Electric Motors
On September 12, 2024, the Ministry of Energy Transition and Sustainable Development and the Ministry of Industry and Trade issued a joint Decree No. 1530.24 for the implementation of minimum energy performance level for electric motors which will be mandatory one (1) year after the publication date of this decree.
Official sourceEnergy Efficiency
Morocco
Morocco MoIT Issues Decree for Mandatory Minimum Energy Performance and Energy Labeling of Refrigerators
On September 12, 2024, the Ministry of Energy Transition and Sustainable Development and the Ministry of Industry and Trade issued joint Decree No. 2040.24 for the implementation of minimum energy performance level and energy labeling for refrigerators which will be mandatory six (6) months after the publication date of this decree.
Official sourceEnergy Efficiency, Performance
Saudi Arabia
Saudi Arabia SASO Prepares Draft Standard SASO 2663 - Air Conditioners Minimum Energy Performance, Labelling and Testing Requirements For Low-capacity Window and Single-Split Types
On August 21, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) notified WTO/TBT on the draft standard SASO 2663 for air conditioners minimum energy performance, labelling and testing requirements for low-capacity window and single-split types.
Comments and feedback can be submitted to enquirypoint@saso.gov.sa until October 20, 2024.
Official sourceEnergy Efficiency, Performance
EU
European Union EC Publishes List of Harmonized Standard for Refrigerating Appliances With Direct Sales Function (Ecodesign and Energy Labelling)
On September 12, 2024, the European Commission (EC) published Commission Implementing Decision (EU) 2024/2397 of 11 September 2024 on a harmonized standard for refrigerating appliances with a direct sales function drafted in support of Regulation (EU) 2019/2018 and Regulation (EU) 2019/2024.
Commission Delegated Regulation (EU) 2019/2018 is the regulation with regard to energy labelling of refrigerating appliances with a direct sales function. Commission Regulation (EU) 2019/2024 is the ecodesign requirements for refrigerating appliances with a direct sales function.
Official sourceEnergy Efficiency, Performance
India
India BIS Publishes Amendment Standard IS 2026 Part 3:2018 + A1:2024 - Power Transformers Part 3 Insulation Levels, Dielectric Tests and External Clearances in Air
On August 13, 2024, the Bureau of Indian Standards (BIS) published an amendment standard IS 2026 Part 3:2018 + A1:2024 for power transformers - insulation levels, dielectric tests and external clearances in air (fourth revision) which will be mandatory on February 10, 2025.
Official sourceEnergy Efficiency, Performance
Morocco
Morocco MoIT Issues Decree for Mandatory Minimum Energy Performance and Energy Labeling of Air Conditioners
On September 12, 2024, the Ministry of Energy Transition and Sustainable Development and the Ministry of Industry and Trade issued joint Decree No. 1529.24 for the implementation of minimum energy performance level and energy labeling for air conditioners which will be mandatory six (6) months after the publication date of this decree.
Official sourceEnergy Efficiency, Performance
Thailand
Thailand MIND Announces New Energy Performance Standard for Electric Rice-Cookers (TIS 2545-2567)
On September 7, 2024, the Ministry of Industry of Thailand announced the establishment of TIS 2545 - 2567 (2024) titled Electric Rice - Cookers: Particular Requirements for Energy Performance, cancelling the superseded standard, TIS 2545-2555 (2012) - Electric Rice-Cookers: Energy Efficiency Requirements.
This announcement will take effect a hundred and twenty days after its publication in the official gazette, which is January 5, 2025.
Official sourceEnergy Efficiency, Performance
Thailand
Thailand MIND Announces New Energy Performance Standard for Electric Irons (TIS 2590-2567)
On September 7, 2024, the Ministry of Industry of Thailand announced the establishment of TIS 2590 - 2567 (2024) Electric Irons: Particular Requirements for Energy Performance to improve the required energy efficiency characteristics of industrial product standards for electric irons.
This announcement will take effect on January 5, 2025.
Official sourceEnergy Efficiency, Performance
Serbia
Serbia MoME Issues New Regulation for Eco-design Requirements of Vacuum Cleaners
On September 20, 2024, the Serbian Ministry of Mining and Energy (MoME) issued a new rulebook on eco-design requirements of vacuum cleaners to align with European Union (EU) legislation. This rulebook or regulation entered into force onptember 28, 2024 and will apply from January 1, 2026.
Official sourceEnergy Efficiency, Safety
Argentina
Argentina Changes in Conformity Assessment Regulations
Resolution 237/2024 was published as the new general framework regulation for Conformity Assessment in Argentina. It withdraws and replaces other regulations that ruled in conjunction the Conformity Assessment process until now. Existing Technical Rules specific for each scope remain active as they are now.
Please contact your local UL Solutions office for more information.Energy Efficiency, Safety
China
China SAC/SAMR Publishes 24 National Standards and 2 Standards Revisions Including Energy Efficiency Limits for Household and Similar Kitchen Appliances
On August 23, 2024, the National Standardization Administration (SAC) of the State Administration for Market Regulation (SAMR) published Announcement No.18 of 2024 to approve 24 mandatory national standards including the Energy Efficiency Limits for Household and Similar Kitchen Appliances and 2 mandatory national standard amendments with different implementation dates.
Official sourceEnergy Efficiency, Safety, Wireless
Malaysia
Malaysia SIRIM Announces Operation Closure on Upcoming Holiday
On September 6, 2024, the Standard and Industrial Research Institute of Malaysia (SIRIM) QAS International released an announcement regarding their office closure due to a holiday.
Official sourceEnergy Efficiency; Performance
Serbia
Serbia MoME Publishes New List of Serbian Standards for Eco-Design of Household Dishwashers (73/2024-216)
On August 30, 2024, the Ministry of Mining and Energy (MoME) published a list of Serbian standards in the field of eco-design for household dishwashers in the Official Gazette of the Republic of Serbia No. 73/2024-216. The list adopts harmonized standards from the reference list of European harmonized standards for household dishwashers published in the Official Journal of the European Union.
Official sourceExplosive Atmospheres
Global
IEC Publishes New Standard IEC 60079-14:2024 - Electrical Installation Design, Selection and Installation of Ex Equipment
On August 30, 2024, the International Electrotechnical Commission (IEC) released IEC 60079-14:2024. This standard deals with electrical installation design, selection and installation of equipment, including initial inspection of equipment used in Explosive Atmosphere.
Official sourceExplosive Atmospheres, Safety
Saudi Arabia
Saudi Arabia SASO Announces Updated List of Certification Program for IECEE National Recognition Certificate, IECEE Conformity Certificate and SASOEX Conformity Certificate
On September 9, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) announced an updated list of certification program:
- IECEE National Recognition Certificate certification Program;
- IECEE CB test certification Program;
- SASOEX Conformity Certificate certification Program.
Please contact your local UL Solutions office for more information.F Gas, Chemicals
EU
European Union EC Publishes Regulation on Format of the Labels for Certain Products and Equipment Containing Fluorinated Greenhouse Gases
On September 3, 2024, the European Commission (EC) published Commission Implementing Regulation (EU) 2024/2174 in the Official Journal of the European Union. This Regulation lays down rules for applying Regulation (EU) 2024/573 of the European Parliament and of the Council regarding the format of the labels for certain products and equipment containing fluorinated greenhouse gases and repeals Commission Implementing Regulation (EU) 2015/2068.
The new Regulation entered into force on September 23, 2024, and will apply from January 1, 2025. This Regulation will be binding in its entirety and directly applicable in all Member States.
Official sourceF Gas, Chemicals
EU
European Union EC Publishes Regulation for New Format of F-Gas Reporting
On September 5, 2024, the European Commission (EC) published Commission Implementing Regulation (EU) 2024/2195 in the Official Journal of the European Union. This Regulation determines the format for submitting the reports of data referred to in Article 26 of Regulation (EU) 2024/573 of the European Parliament and of the Council on fluorinated greenhouse gases and repeals Commission Implementing Regulation (EU) No. 1191/2014.
This Regulation entered into force on September 25, 2024, and will be binding in its entirety and directly applicable in all Member States.
Official sourceF Gas, Chemicals
EU
European Union EC Publishes Regulation for F-Gases that Extends RACHP Certification Requirements to Organic Rankine Cycles and Refrigerated Units in Mobile Equipment
On September 9, 2024, the European Commission (EC) published Commission Implementing Regulation (EU) 2024/2215 which extends certification requirements for equipment beyond Refrigeration Air Conditioning and Heat Pump (RACHP) to include organic Rankine cycles and refrigerated mobile units.
The Regulation also outlines certification programs for the safe handling of flammable or toxic gases in high-pressure equipment, covering an extended list of substances in relevant equipment. The minimum certification requirements for natural and legal persons in terms of the scope of activities and equipment covered, as well as the skills and knowledge to be covered, have also been updated, as have the rules for certification and the conditions for mutual recognition of certificates.
The regulation entered into force on September 29, 2024 and will be binding in its entirety and directly applicable in all Member States.
Official sourceF Gas, Chemicals
Vietnam
Vietnam DCC/MONRE Publishes Draft TCVN Refrigerants - Part 1: Safety Requirements in the Production and Installation of Wall-mounted Air Conditioners Using R-32
On August 29, 2024, the Department of Climate Change (DCC) published TCVN (Vietnam Standards) Refrigerants - Part 1: Safety requirements in the production and installation of wall-mounted air conditioners using R-32 for public comments. The draft standard aims to ensure safety in the production and use of
wall-mounted air conditioners containing flammable refrigerants.
Official sourceF Gas, Chemicals
Vietnam
Vietnam MONRE Publishes Revisions of Decree on the Mitigation of Greenhouse Gas (GHG) Emissions and Protection of the Ozone Layer
On July 5, 2024, the Ministry of Natural Resources and Environment (MONRE) proposed a draft to revise Decree No. 06/2022/ND-CP on Mitigation of GHG Emissions and Protection of Ozone Layer. The proposed revisions include revised requirements for GHG inventory and quota allocation, organization of the domestic carbon market, and specifications of equipment containing controlled fluorinated greenhouse gases.
Official sourceF Gas, Chemicals
EU
European Union EC Publishes Amendment Regulation for the Functioning of the F-Gas Portal
On September 20, 2024, the European Commission (EC) published Commission Implementing Regulation (EU) 2024/2473 in the Official Journal of the European Union. This lays down rules for the application of Regulation (EU) 2024/573 as regards the registration in the F-gas Portal and repealing (EU) 2019/661.
The Regulation entered into force on October 10, 2024, and will be binding in its entirety and directly applicable in all Member States.
Official sourceF Gas, Chemicals
Australia
Australia DCCEEW Publishes Cold Hard Facts 4
On August 1, 2024, the Australia Department of Climate Change, Energy, the Environment and Water (DCCEEW) published Cold Hard Facts 4 which provides an economic and technological assessment of Australia's refrigeration and air conditioning industry, highlighting its significant use of synthetic greenhouse gases and ozone-depleting substances. The report analyzes the industry's size, economic value, equipment, gas imports, and emissions, assisting policymakers in managing synthetic greenhouse gases and ozone-depleting substances.
Official sourceF Gas, Chemicals, Safety
Singapore
Singapore SCDF Issues Proposed Safety Requirements to Allow Use of R-290/R-32 in Portable Air Conditioners (PACs)
On September 13, 2024, the Singapore Civil Defence Force (SCDF) released Proposed Safety Requirements to Allow Use of R-290/R-32 in Portable Air Conditioners (PACs) for public consultation.
The deadline for feedback was September 27, 2024.
Please contact your local UL Solutions office for more information.Noise
United Kingdom
United Kingdom DBT Calls for Evidence on Measuring Noise from Outdoor Equipment
On September 16, 2024, the Department for Business and Trade (DBT) of the Government of UK issued a Call for Evidence on measuring noise from outdoor equipment. This is in line with the European Union amending the Annex III of Directive 2000/14/EC on Methods of Measurement of Airborne Noise Emitted by Equipment for Use Outdoors with technical progress from May 22, 2025.
The Department is looking forward to hearing views from all interested parties including:
- manufacturers
- authorized representatives
- trade associations
- conformity assessment bodies
- consumers
- workers
- market surveillance and enforcement authorities
This call for evidence will close at 11:59pm on November 11, 2024. Responses may be send through email at: outdoornoise@businessandtrade.gov.uk, or in writing to:
Measuring noise from outdoor equipment: call for evidence
Office for Product Safety and Standards
4th Floor Cannon House
18 The Priory Queensway
Birmingham
B4 6BS
Official sourceNoise, Performance
Peru
Peru INACAL Publishes Various Draft Technical Peruvian Standards
On September 9, 2024, the National Institute of Quality (INACAL) published various draft Peruvian standards.
- PNTP 281.902:2024 - Air conditioners and liquid coolers with evaporative condenser and electrically driven compressor for room cooling. Terms, definitions, test conditions, test methods and requirements
- PNTP-IEC 60034-9:2024 - Rotating electrical machines - Part 9: Noise limits
- PNTP-IEC 60704-2-14:2018/MT 2:2024 - Household and similar electrical appliances - Test code for determination of airborne acoustic noise - Part 2-14: Particular requirements for refrigerators, frozen food storage cabinets and food freezers - Technical Modification 2
These draft technical standards and/or related texts will be available to the interested public for consultation until November 8, 2024. Comments must be sent using the virtual platform: Sala de Lectura Virtual (inacal.gob.pe).
Official sourcePerformance
Brazil
Brazil ABNT Publishes New Standard ABNT NBR 17173-5:2024 - Test Methods for Resistance to Ozone, Hot Elongation and Immersion In Mineral Oil
On August 28, 2024, the Brazilian Association of Technical Standards (ABNT) published a new standard ABNT NBR 17173-5:2024 for common test methods for insulating and sheathing materials of electric and optical cables: methods specific to elastomeric compounds - ozone resistance, hot set and mineral oil immersion tests.
Official sourcePerformance
Brazil
Brazil ABNT Publishes New Standard ABNT NBR 17173-3:2024 - Test Methods for Determining Mass Density, Water Absorption and Shrinkage Test
On August 28, 2024, the Brazilian Association of Technical Standards (ABNT) published a new standard ABNT NBR 17173-3:2024 for common test methods for electrical cable insulation and covering materials: methods for general application - methods for the determination of bulk density - water absorption tests - shrinkage test.
Official sourcePerformance
Brazil
Brazil ABNT Publishes New Standard ABNT NBR 17173-7:2024 - Test Methods for PVC Compounds - Loss of Mass and Thermal Stability Test
On August 28, 2024, the Brazilian Association of Technical Standards (ABNT) published a new standard ABNT NBR 17173-7:2024 for common test methods for insulating and sheathing materials of electric cables: methods specific to PVC compounds - loss of mass test - thermal stability test.
Official sourcePerformance
Brazil
Brazil ABNT Publishes New Standard ABNT NBR 17173-6:2024 - Test Methods for Pressure at High Temperature and Resistance to Cracking
On August 28, 2024, the Brazilian Association of Technical Standards (ABNT) published a new standard ABNT NBR 17173-6:2024 for common test methods for insulating and sheathing materials of electric cables: methods for general application - pressure test at high temperature - tests for resistance to cracking.
Official sourcePerformance
Brazil
Brazil ABNT Publishes New Standard ABNT NBR 17173-1:2024 - Test Methods for Measurement of Thicknesses, External Dimensions and Mechanical Properties
On August 28, 2024, the Brazilian Association of Technical Standards (ABNT) published a new standard ABNT NBR 17173-1:2024 for common test methods for electrical cable insulation and covering materials: methods for general application - measurement of thicknesses and external dimensions - tests for the determination of mechanical properties.
Official sourcePerformance
Brazil
Brazil ABNT Publishes New Standard ABNT NBR 17173-4:2024 - Test Methods for Low Temperature
On August 28, 2024, the Brazilian Association of Technical Standards (ABNT) published a new standard ABNT NBR 17173-4:2024 for common test methods for electrical cable insulation and covering materials: methods for general application - tests at low temperature.
Official sourcePerformance
Brazil
Brazil ABNT Publishes New Standard ABNT NBR 17173-2:2024 - Thermal Aging Test Methods
On August 28, 2024, the Brazilian Association of Technical Standards (ABNT) published a new standard ABNT NBR 17173-2:2024 for common test methods for electrical cable insulation and covering materials: methods for general application - thermal aging methods.
Official sourcePerformance
Brazil
Brazil ABNT Publishes New Standard ABNT NBR IEC 60034-7:2024 - Classification Types of Construction, Mounting Arrangements and Terminal Box Position (IM Code)
On August 27, 2024, the Brazilian Association of Technical Standards (ABNT) published a new standard ABNT NBR IEC 60034-7:2024 for rotating electrical machines: classification of types of construction, mounting arrangements and terminal box position (IM code).
The date of withdrawal of superseded version was August 27, 2024.
Official sourcePerformance
Chile
Chile Ministry of Environment Approves Protocol Analysis and Testing of Light Pollution from Outdoor Lighting Fixtures and/or Projectors
On August 17, 2024, the Ministry of Environment of Chile published a new draft protocol PCL N°1:2024. This protocol deals with the analysis and testing of light pollution from outdoor lighting fixtures and/or projectors.
This resolution entered into force on August 17, 2024.
Official sourcePerformance
Brazil
Brazil ABNT Publishes New Standard ABNT NBR IEC 60034-14:2024 - Rotating Electrical Machines with Shaft Heights 56mm and Higher
On August 26, 2024, the Brazilian Association of Technical Standards (ABNT) published a new standard ABNT NBR IEC 60034-14:2024 for rotating electrical machines: mechanical vibration of certain machines with shaft heights 56 mm and higher - measurement, evaluation and limits of vibration severity.
The date of withdrawal of superseded version was August 26, 2024.
Official sourcePerformance
EU
European Union CENELEC Publishes Amended Standard EN IEC 63128:2019/A1:2024 - Lighting Control Interface for Dimming
On August 30, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 63128:2019/A1:2024 for lighting control interface for dimming - analogue voltage dimming interface for electronic current sourcing controlgear.
Official sourcePerformance
South Korea
South Korea MOTIE Publishes Revision of Electric Vehicle Charger Technical Standards
On July 17, 2024, the Ministry of Trade, Industry and Energy (MOTIE) of South Korea published Notice No. 2024-115 on the partial revision of Electric Vehicle Charger Technical Standards.
This revision took effect on July 17, 2024.
Official sourcePerformance
Uruguay
Uruguay UNIT Publishes Draft Standard PU UNIT-IEC 62722-2-1:2023 - Performance Requirements for Luminaires
On August 27, 2024, the Uruguayan Institute of Technical Standards (UNIT) published a draft standard PU UNIT-IEC 62722-2-1:2023. This standard deals with the performance requirements of LED luminaires. The draft UNIT-IEC standard is identical to the International Standard without any modifications.
Feedbacks and comments were submitted until September 27, 2024.
Official sourcePerformance
EU
European Union CENELEC Publishes New Standard EN IEC 61674:2024 - Medical Electrical Equipment - Dosimeters
On August 30, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 61674:2024 for medical electrical equipment - dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging.
The date of withdrawal of superseded version is August 13, 2027.
Official sourcePerformance
Uruguay
Uruguay UNIT Publishes Draft Standard for the Performance Requirements of LED Modules for General Lighting
On August 27, 2024, the Uruguayan Institute of Technical Standards (UNIT) published a draft standard PU UNIT-IEC 62717:2014 +AMD1:2015 +AMD2:2019. This standard deals with the performance requirements of LED modules for general lighting. The draft UNIT-IEC standard is identical to the International Standard without any modifications.
Feedback and comments were submitted until September 27, 2024.
Official sourcePerformance
EU
European Union CENELEC Publishes New Standard EN IEC 62676-5-1:2024 - Test Method for Performance of Video Surveillance Camera Equipment
On September 6, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 62676-5-1 for video surveillance systems for use in security applications: data specifications and image quality performance for camera devices - environmental test methods for image quality performance.
Official sourcePerformance
EU
European Union CENELEC Publishes New Standard EN IEC 60384-8:2024 - Fixed Capacitors of Ceramic Dielectric, Class 1
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 60384-8:2024 for fixed capacitors for use in electronic equipment: sectional specification - fixed capacitors of ceramic dielectric, class 1.
The date of withdrawal of superseded version is September 18, 2027.
Official sourcePerformance
EU
European Union CENELEC Publishes New Standard EN IEC 60384-9:2024 - Fixed Capacitors of Ceramic Dielectric, Class 2
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 60384-9:2024 for fixed capacitors for use in electronic equipment: sectional specification - fixed capacitors of ceramic dielectric, class 2.
The date of withdrawal of superseded version is September 18, 2027.
Official sourcePerformance
Global
IEC Publishes New Standard IEC 61156-15:2024 - Multicore and Symmetrical Pair/Quad Cables for Digital Communications
On August 21, 2024, International Electrotechnical Commission (IEC) released IEC 61156-15:2024. This standard deals with sectional specification for symmetrical pair/quad cables for horizontal floor wiring with transmission characteristics up to 1 000 MHz and resistance to fire performance characteristics.
Official sourcePerformance
Global
IEC Publishes New Standard IEC 63356-2:2024 - Design Parameters and Values of an LED Light Source
On September 13, 2024, the International Electrotechnical Commission (IEC) released IEC 63356-2:2024. This standard specifies the design parameters and values for LED light sources, as well as related interface characteristics. The main objective is to ensure that LED products meet specific performance standards, promoting interchangeability among different manufacturers' products.
Official sourcePerformance, Energy Efficiency
Chile
Chile SEC Publishes Draft Efficiency Analysis and Testing Protocol for Street Lighting Luminaires
On September 10, 2024, the Superintendency of Electricity and Fuels (SEC) published a new draft protocol PE No. 5/34:2024. This protocol outlines the certification process for luminous efficacy (Lm/W) of outdoor road and street lighting luminaires, which is mandatory under a SEC protocol.
The final date of comments is on October 26, 2024.
Official sourcePerformance, Noise
Global
IEC Publishes New Standard IEC 60704-2-10:2024 - Determination of Airborne Acoustical Noise Produced by Ranges, Ovens, Steam Ovens, Grills and Microwave Ovens
On September 3, 2024, the International Electrotechnical Commission (IEC) released IEC 60704-2-10:2024. This standard deals with test code for the determination of airborne acoustical noise for household and similar electrical appliances particular for ranges, ovens, steam ovens, grills and microwave ovens.
Official sourcePerformance, Safety
EU
European Union CEN Publishes Amendment Standard EN 334:2019+A1:2024 - Gas Pressure Regulators for Inlet Pressure Up To 10 MPa (100 bar)
On September 11, 2024, the European Committee for Standardization (CEN) published an amendment standard EN 334:2019+A1:2024 for gas pressure regulators for inlet pressure up to 10 MPa (100 bar).
The date of withdrawal of superseded version is March 31, 2025.
Official sourcePerformance; Safety; Cyber Security;
Global, CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 38 (2024-W38)
On September 20, 2024, new TRFs were published and added to the IECEE website.
Official sourceRoHS, Chemicals
China
China SAC/SAMR Publishes Updated Standard of Material Declaration for EEE Products
On August 23, 2024, the Standardization Administration under the State Administration for Market Regulation (SAMR) of the People’s Republic of China published a voluntary standard GB/T 26668-2024 Material Declaration for Electrical and Electronic Products, which replaced GB/Z 26668-2011. The standard outlines the standardized procedures, content, and format for material declarations for electronic and electrical products, outlining basic requirements for material composition and content display.This standard was implemented on August 23, 2024.
Official sourceRoHS, Chemicals
China
China MSA Issues List of Hazardous Materials Prohibited or Restricted for Installation and Use by Chinese Sea Vessels
On August 15, 2024, the Maritime Safety Administration (MSA) of the People's Republic of China issued List of Hazardous Materials Prohibited or Restricted from Installation and Use by Chinese Sea Vessels. This applies to all Chinese international and domestic seagoing vessels newly built and repaired after June 26, 2025, as mentioned in the initial draft published for comments on February 22, 2024.
Official sourceRoHS, Chemicals
Ukraine
Ukraine Cabinet of Ministers Publishes Resolution on Amendments to Annexes 3 and 4 to the Technical Regulation on the Restriction of the Use of Certain Hazardous Substances in Electrical
On September 24, 2024, the Cabinet Ministers of Ukraine Resolution dated September 17, 2024 No. 1068 on Amendments to Appendixes 3 and 4 to the Technical Regulation on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment has been published on the Ukraine Official Gazette. This Resolution proposes to amend Annexes 3 and 4 to the Technical Regulations by extending the terms of validity of certain exemptions to the restrictions, as well as supplementing the said annexes with new exemptions.
Please contact your local UL Solutions office for more information.RoHS, Electrical and Electronic Waste, Chemicals
China
China MIIT Publishes Eight Draft Industry Standards for Approval
On September 9, 2024, the Ministry of Industry and Information Technology (MIIT) of the People’s Republic of China published eight industry draft standards for approval which include:
- SJ/T 11364-2024 Labeling requirements for restricted use of hazardous substances in electrical and electronic products
- SJ/T 11952-2024 Green factory evaluation requirements for the recycling and comprehensive utilization of waste electrical and electronic products
The deadline for feedback is October 16, 2024.
Official sourceSafety
China
China CNCA Issues Implementation Rules for CCC Certification of Lithium-Ion Batteries and Chargers for Electric Bicycles
On July 29, 2024, the National Certification and Accreditation Administration (CNCA) published an announcement No. 16 of 2024 to release CNCA-C11-21: 2024 Implementation Rules for Compulsory Product Certification of Lithium-ion Batteries for Electric Bicycles and CNCA-C11-22: 2024 Implementation Rules for Compulsory Product Certification of Electric Bicycle Charger for CCC certification rules for lithium-ion batteries and charger for electric bicycles.
The rules will be put into effect on October 15, 2024.
Official sourceSafety
Saudi Arabia
Saudi Arabia SASO Circulates Requirements for Implementation of Unifying Types of Charging Ports for Electronic Devices
On August 30, 2024, the Saudi Standards, Metrology and Quality Organization (SASO)/IECEE department circulated the requirements for the implementation for unifying types of charging ports for electronic devices under the scope of SASO IECEE recognition certificate.
Please contact your local UL Solutions office for more information.Safety
Brazil
Brazil MCTI Informs Stakeholders Regarding Temporary Exemption from Assembly Requirements in Manufacturing of IT Products
On August 12, 2024, the Ministry of Science, Technology and Innovation (MCTI) informed stakeholders for the temporary exemption from assembly requirements for specific IT components, such as an industrial motherboard.
This Ordinance came into force on the date (August 12, 2024) of its publication.
Official sourceSafety
Global
IEC Publish
New Standard IEC 60335-2-12:2024 - Safety Requirements for Warming Plates and Similar Appliances
On August 23, 2024, the International Electrotechnical Commission (IEC) released IEC 60335-2-12:2024. This standard deals with the safety requirements for warming plates and similar appliances.
Official sourceSafety
Chile
Chile SEC Publishes New Draft Safety Protocol Update for Printers
On August 23, 2024, the Superintendency of Electricity and Fuels (SEC) published a draft protocol PE Nº8/07:2024 which establishes the safety certification for printers.
The public consultation period started on August 23, 2024, until October 11, 2024. The document under consultation and instructions for sending observations and/or comments can be found in the following link.
Official sourceSafety
USA
USA Underwriters Laboratories Publishes UL 61010-2-202 - Requirements for Electrically Operated Valve Actuators
On August 22, 2024, UL Standards & Engagement published Edition 1 of UL 61010-2-202. This standard deals with the safety requirements for electrical equipment for measurement, control and laboratory use particular for electrically operated valve actuators.
Official sourceSafety
USA
USA Underwriters Laboratories Publishes UL 2272 - Electrical Systems for Personal E-Mobility Devices
Underwriters Laboratories published Edition 2 of UL 2272. This standard covers the electrical drive train system, battery system, circuitry, and components for electric scooters and other personal e-mobility devices, as defined in the standard.
Official sourceSafety
EU
European Union CEN Publishes New Standard EN ISO 18497-1:2024 - Agricultural Machinery and Tractors for Design Principles and Vocabulary
On August 28, 2024, the European Committee for Standardization (CEN) published a new standard EN ISO 18497-1:2024 for agricultural machinery and tractors - safety of partially automated, semi-autonomous and autonomous machinery: machine design principles and vocabulary.
The date of withdrawal of superseded version is February 28, 2025.
Official sourceSafety
EU
European Union CEN Publishes New Standard EN ISO 18497-2:2024 - Agricultural Machinery and Tractors for Obstacle Protection Systems
On August 28, 2024, the European Committee for Standardization (CEN) published a new standard EN ISO 18497-2:2024 for agricultural machinery and tractors - safety of partially automated, semi-autonomous and autonomous machinery: design principles for obstacle protection systems.
The date of withdrawal of superseded version is February 28, 2025.
Official sourceSafety
Uruguay
Uruguay URSEA Extends Public Consultation for the Modification of Safety Regulation for Gas Appliances, Portable Containers for LPG and Natural Gas Annexes
On August 23, 2024, the Ursea Board of Directors extended Public Consultation No. 66, which focuses on modifications to Annexes II and III of the Safety Regulations for portable gas containers and their accessories for LPG and natural gas. This was resolved during their session held last August 20, 2024.
The public consultation was accepted until September 27, 2024.
Official sourceSafety
EU
European Union CEN Publishes New Standard EN ISO 18497-3:2024 - Agricultural Machinery and Tractors for Autonomous Operating Zones
On August 28, 2024, the European Committee for Standardization (CEN) published a new standard EN ISO 18497-3:2024 for agricultural machinery and tractors - safety of partially automated, semi-autonomous and autonomous machinery: autonomous operating zones.
The date of withdrawal of superseded version is February 28, 2025.
Official sourceSafety
EU
European Union CEN Publishes a New Standard EN ISO 18497-4:2024 - Agricultural Machinery and Tractors for Verification Methods and Validation Principles
On August 28, 2024, the European Committee for Standardization (CEN) published a new standard EN ISO 18497-4:2024 for agricultural machinery and tractors - safety of partially automated, semi-autonomous and autonomous machinery: verification methods and validation principles.
The date of withdrawal of superseded version is February 28, 2025.
Official sourceSafety
USA
USA Underwriters Laboratories Publishes UL 979 - Water Treatment Appliances
On August 26, 2024, the Underwriters Laboratories (UL) published Edition 3 of UL 979. This standard cover electrically operated water treatment appliances for household, commercial, and industrial use, ensuring compliance with NFPA 70 and 600 V rating.
Official sourceSafety
Indonesia
Indonesia MOI Publishes Technical Regulation on Implementation of National Standards for Gas Stoves
On July 15, 2024, the Ministry of Industry (MOI) published Regulation No. 22 of 2024 on mandatory implementation of national standards for ow pressure gas stove type two and three trivets with lighter system. The regulation covers the issuance of SNI certificate using type 5 certification scheme, production process assessment and implementation of ISO 9001:2015, including product quality testing.
Official sourceSafety
Indonesia
Indonesia MOI Publishes Technical Regulation on Implementation of National Standards for LPG Cylinder Regulators
On July 15, 2024, the Ministry of Industry (MOI) published Regulation No.30 of 2024 on implementation of mandatory Indonesian national standards for LPG cylinder regulators. The Regulation covers the issuance of SNI certificate using type 5 certification scheme, production process assessment and implementation of ISO 9001:2015, including product quality testing.
Official sourceSafety
Chile
Chile SEC Publishes Draft Safety Analysis and Testing Protocol for Solar Luminaire for Public Lighting
On August 28, 2024, the Superintendency of Electricity and Fuels (SEC) published a new draft protocol PE No. 5/32:2024. This protocol deals with the safety analysis and testing of solar luminaire for public lighting.
The final date of comments is October 12, 2024.
Official sourceSafety
Chile
Chile SEC Publishes Draft Safety Analysis and Testing Protocol for Solar Luminaire (Floodlight) for Public Lighting
On August 28, 2024, the Superintendency of Electricity and Fuels (SEC) published a new draft protocol PE No. 5/33:2024. This protocol deals with the safety analysis and testing of solar luminaire (solar area floodlight) for public lighting.
The final date of comments was October 12, 2024.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN IEC 61535:2024 - Installation Couplers Intended for Permanent Connection In Fixed Installations
On August 30, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 61535:2024 for installation couplers intended for permanent connection in fixed installations.
The date of withdrawal of superseded version is June 12, 2027.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN 60670-22:2006/A1:2024 - Connecting Boxes and Enclosures
On August 30, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60670-22:2006/A1:2024 for boxes and enclosures for electrical accessories for household and similar fixed electrical installations: particular requirements for connecting boxes and enclosures.
Official sourceSafety
Australia
Australia NSW Government Announces New Safety Standards Requirements for Lithium-ion Batteries in E-mobility Devices
On August 2, 2024, the New South Wales Government announced that starting from February 2025, e-mobility devices such as e-bikes and e-scooters and lithium-ion batteries used to power these devices sold in NSW must comply with the prescribed safety standards. These requirements have been introduced to ensure that only safe and compliant products are available in the market reducing the risk of fires.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN 60670-22:2006/A11:2024 - Connecting Boxes and Enclosures
On August 30, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60670-22:2006/A11:2024 for boxes and enclosures for electrical accessories for household and similar fixed electrical installations - part 22: particular requirements for connecting boxes and enclosures.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN 50522:2022/A1:2024 - Earthing of Power Installations Exceeding 1 kV A.C.
On September 6, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 50522:2022/A1:2024 for earthing of power installations exceeding 1 kV A.C.
Official sourceSafety
Australia
Australia Queensland Government Publishes Electrical Safety and Other Legislation Amendment Act 2024 (ESOLA Act)
On September 2, 2024, the Queensland Government published Electrical Safety and Other Legislation Amendment Act 2024 (ESOLA Act). The Act amends the Electrical Safety Act 2002, and makes consequential amendments to the Electrical Safety Regulation 2013 (ES Regulation).
Official sourceSafety
China
China MIIT Issues a Public Consultation for Nine Mandatory National Standards, Including Refrigeration and Air-conditioning Equipment
On July 17, 2024, the Ministry of Industry and Information Technology (MIIT) prepared draft standard GB XXXXX—202X. This standard specifies the general safety requirements for refrigeration and air conditioning equipment, and the safety technical requirements for all aspects of the life cycle including materials, design, manufacturing, installation, use, and maintenance.
The deadline for soliciting opinions was September 14, 2024.
Official sourceSafety
South Africa
South Africa SABS Publishes Draft on New Edition of Part 1 of Adjustable Speed Electrical Power Drive Systems
On August 21, 2024, the South African Bureau of Standards (SABS) published a standard for public comments. SANS 61800-1:20xx - Adjustable Speed Electrical Power Drive Systems - Part 1: General Requirements - Rating specifications for Low Voltage Adjustable Speed DC Power Drive Systems. This standard is the identical implementation of IEC 61800-1:2021 Edition 2.
Any comment on the draft:
- Should be sent by the indicated closing date, either by mail, or by fax, or by e-mail to:
SABS Standards Division
Attention: Compliance and Development department
Private Bag X191, Pretoria 0001
Fax No.: (012) 344-1568 (for attention: dsscomments)
E-mail: dsscomments@sabs.co.za
- Must contain the number of the clause/sub clause to which it refers, and will be well motivated and, where applicable, contain the proposed amended text.
The SABS Commenting template will be used to submit comments (links below):
- DSS COMMENTING TEMPLATE (to download the template); and
- SABS Template for comments and secretariat observations - User Guide (for instructions to complete the commenting template).
Note:
Date of circulation: August 21, 2024
Closing date: October 24, 2024
Official sourceSafety
South Africa
South Africa SABS Publishes a Draft Standard for the Safety Requirements of Hand-Held Drills and Impact Drills
On August 21, 2024, the South African Bureau of Standards (SABS) published a new draft standard SANS 62841-2-1:20XX or the Safety of Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Particular Requirements for Hand-Held Drills and Impact drills.
Any comment on the draft:
- Should be sent by the indicated closing date, either by mail, or by fax, or by e-mail to:
SABS Standards Division
Attention: Compliance and Development department
Private Bag X191, Pretoria 0001
Fax No.: (012) 344-1568 (for attention: dsscomments)
E-mail: dsscomments@sabs.co.za
- Must contain the number of the clause/sub clause to which it refers, and will be well motivated and, where applicable, contain the proposed amended text.
The SABS Commenting template will be used to submit comments (links below):
- DSS COMMENTING TEMPLATE (to download the template); and
- SABS Template for comments and secretariat observations - User Guide (for instructions to complete the commenting template).
Note:
Date of circulation: August 21, 2024
Closing date: October 24, 2024
Official sourceSafety
South Africa
South Africa SABS Opens a Consultation for Amendment of SANS 61010-1:2011
On August 23, 2024, the South African Bureau of Standards (SABS) published a draft amendment to the third edition of SANS 61010-1:2011. The Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 1: General Requirements.
Any comment on the draft:
- Should be sent by the indicated closing date, either by mail, or by fax, or by e-mail to:
SABS Standards Division
Attention: Compliance and Development department
Private Bag X191, Pretoria 0001
Fax No.: (012) 344-1568 (for attention: dsscomments)
E-mail: dsscomments@sabs.co.za
- Must contain the number of the clause/sub clause to which it refers, and will be well motivated and, where applicable, contain the proposed amended text.
The SABS Commenting template will be used to submit comments (links below):
- DSS COMMENTING TEMPLATE (to download the template); and
- SABS Template for comments and secretariat observations - User Guide (for instructions to complete the commenting template).
Note:
Date of circulation: August 23, 2024
Closing date: October 23, 2024
Official sourceSafety
India
India MNRE Releases Draft Amendment Regulation on Approved List of Models and Manufacturers for Solar PV Cells
On September 7, 2024, the Ministry of New and Renewable Energy (MNRE) released a draft amendment regulation on Approved List of Models and Manufacturers (ALMM) for solar PV cells and will be effective from April 1, 2026.
Comments and feedback were submitted until October 6, 2024.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN IEC 60127-8:2018/A1:2024 - Fuse Resistors with Particular Overcurrent Protection
On September 6, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 60127-8:2018/A1:2024 for miniature fuses: fuse resistors with particular overcurrent protection.
Official sourceSafety
Israel
Israel MEI Notifies Stakeholders for Replacement and Change to Official Standard SI 60227 Part 3 - PVC Insulated Cables of Rated Voltages up to and Including 450/750 V
On September 9, 2024, the Ministry of Economy and Industry (MEI) notified stakeholders to replace the official standard SI 60227 Part 3 to SI 50525 Part 2.31 with regards to cables marked with CENELEC codes: H07V2-R, H07V2-U, H07V2-K and update SI 60227 Part 3 by publishing GAT No. 2.
Comments and feedback were accepted until October 9, 2024.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN IEC 62841-2-7:2024 - Electric Motor-Operated Hand-Held Spray Guns
On September 6, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 62841-2-7:2024 for electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety: particular requirements for hand-held spray guns.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN IEC 62841-2-7:2024/A11:2024 - Electric Motor-Operated Hand-Held Spray Guns
On September 6, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 62841-2-7:2024/A11:2024 for electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - safety: particular requirements for hand-held spray guns.
Official sourceSafety
India
India BIS Publishes Revised Standards for Various Electrical Products
On August 27, 2024, the Bureau of Indian Standards (BIS) published revised standards for various electrical products in notification ref: HQ-PUB013/1/2020-PUB-BIS (1015), ref: HQ-PUB013/1/2020-PUB-BIS (1008) dated August 19, 2024, ref: HQ-PUB013/1/2020-PUB-BIS (1002) dated August 13, 2024 and
ref: HQ-PUB012/4/2020-PUB-BIS (933) dated June 28, 2024.
Official sourceSafety
EU
European Union CEN Publishes New Standard EN 17942:2024 - Gas Welding Equipment
On September 11, 2024, the European Committee for Standardization (CEN) published a new standard EN 17942:2024 for welding and allied processes - gas welding equipment - safety requirements for thermoprocess equipment with open firing oxy-fuel gas welding equipment.
Official sourceSafety
South Africa
South Africa SABS Drafts the 3rd Edition of Recessed Luminaires and Recessed Air-Handling Luminaires (SANS 60598-2-2:2024)
On August 27, 2024, the South African Bureau of Standards (SABS) published a draft third edition of SANS 60598-2-2:2024 titled Luminaires - Part 2-2: Particular Requirements - Recessed Luminaires and Recessed Air-Handling Luminaires.
Any comment on the draft:
- Should be sent by the indicated closing date, either by mail, or by fax, or by e-mail to:
SABS Standards Division
Attention: Compliance and Development department
Private Bag X191, Pretoria 0001
Fax No.: (012) 344-1568 (for attention: dsscomments)
E-mail: dsscomments@sabs.co.za
- Must contain the number of the clause/sub clause to which it refers, and will be well motivated and, where applicable, contain the proposed amended text.
The SABS Commenting template will be used to submit comments (links below):
- DSS COMMENTING TEMPLATE (to download the template); and
- SABS Template for comments and secretariat observations - User Guide (for instructions to complete the commenting template).
Note:
Date of circulation: August 27, 2024
Closing date: October 29, 2024
Official sourceSafety
South Africa
South Africa SABS Drafts a New Edition of SANS 61851-23 DC Electric Vehicle Supply Equipment
On August 27, 2024, the South African Bureau of Standards (SABS) drafted the Second Edition of SANS 61851-23:2024 - Electric Vehicle Conductive Charging System - Part 23: DC Electric Vehicle Supply Equipment
Any comment on the draft:
- Should be sent by the indicated closing date, either by mail, or by fax, or by e-mail to:
SABS Standards Division
Attention: Compliance and Development department
Private Bag X191, Pretoria 0001
Fax No.: (012) 344-1568 (for attention: dsscomments)
E-mail: dsscomments@sabs.co.za
- Must contain the number of the clause/sub clause to which it refers, and will be well motivated and, where applicable, contain the proposed amended text.
The SABS Commenting template will be used to submit comments (links below):
- DSS COMMENTING TEMPLATE (to download the template); and
- SABS Template for comments and secretariat observations - User Guide (for instructions to complete the commenting template).
Note:
Date of circulation: August 27, 2024
Closing date: October 29, 2024
Official sourceSafety
EU
European Union Commission Publishes Commission Implementing Decision regarding Laser Products
On September 13, 2024, the European Commission (EC) published Commission Implementing Decision (EU) 2024/2406 of 12 September 2024 amending Implementing Decision (EU) 2019/1698 on European standard for certain laser products.
Official sourceSafety
Malaysia
Malaysia JSM Issues Draft Standard for Emergency Luminaires (DMS 60598-2-22:202X)
On August 15, 2024, the Department of Standards Malaysia (JSM) opened a public consultation for DMS 60598-2-22:202X Luminaires – Part 2-22: Particular requirements – Luminaires for emergency lighting (Second Revision) (IEC 60598-2-22:2021, MOD).
The comment period is until October 14, 2024. Comments can be submitted using the F2 - Public comment form and send to pc@jsm.gov.my.
Official sourceSafety
New Zealand
New Zealand MoH Prepares Draft Amendment Bill (No 2) on Smokefree Environments and Regulated Products
On September 13, 2024, the Ministry of Health prepared draft Amendment Bill (2) on smokefree environments and regulated products. The Bill prescribes certain characteristics for vaping products manufactured, sold, supplied or distributed in New Zealand.
The deadline for comments was September 27, 2024.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN IEC 61084-1:2024 - Cable Trunking Systems and Cable Ducting Systems - General Requirements
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61084-1:2024 for cable trunking systems and cable ducting systems for electrical installations: general requirements.
The date of withdrawal of superseded version is August 5, 2029.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN IEC 61084-1:2024/A11:2024 - Cable Trunking Systems and Cable Ducting Systems - General Requirements
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 61084-1:2024/A11:2024 for cable trunking systems and cable ducting systems for electrical installations: general requirements.
Official sourceSafety
Global
IEC Publishes New Standard IEC 62841-3-11:2024 - Safety Requirements for Transportable Combined Mitre and Bench Saws
On September 3, 2024, the International Electrotechnical Commission (IEC) released IEC 62841-3-11:2024. This standard deals with electric motor-operated hand-held tools, transportable tools and lawn and garden machinery particular for the safety requirements of transportable combined mitre and bench saws.
Official sourceSafety
Global
IEC Publishes New Standard IEC 62271-211:2024 - Direct Connection Between Power Transformers and Gas-Insulated Metal-Enclosed Switchgear for Rated Voltages Above 52 kV
On September 4, 2024, the International Electrotechnical Commission (IEC) released IEC 62271-211:2024. This standard deals with high-voltage switchgear and controlgear particular for direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV.
Official sourceSafety
Mexico
Mexico CRE Publishes General Administrative Provisions in Electromobility
On September 10, 2024, the Energy Regulatory Commission (CRE) issued Agreement No. A/108/2024, implementing general administrative provisions on electromobility for the integration of charging infrastructure for electric and hybrid vehicles that can be connected to the National Electric System as part of a Smart Electric Grid.
The Resolution came into effect on September 11, 2024.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN IEC 61084-2-1:2024 - Cable Trunking Systems and Cable Ducting Systems Intended for Mounting On Walls and Ceilings
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61084-2-1:2024 for cable trunking systems and cable ducting systems for electrical installations: particular requirements - cable trunking systems and cable ducting systems
intended for mounting on walls and ceilings.
The date of withdrawal of superseded version is August 5, 2029.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN IEC 61084-2-1:2024/A11:2024 - Cable Trunking Systems and Cable Ducting Systems Intended for Mounting On Walls and Ceilings
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 61084-2-1:2024/A11:2024 for cable trunking systems and cable ducting systems for electrical installations: particular requirements - cable trunking systems and cable ducting systems intended for mounting on walls and ceilings.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN IEC 61084-2-2:2024 - Cable Trunking Systems and Cable Ducting Systems Intended for Mounting Underfloor, Flushfloor, or Onfloor
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61084-2-2:2024 for cable trunking systems and cable ducting systems for electrical installations: particular requirements - cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor.
The date of withdrawal of superseded version is August 5, 2029.
Official sourceSafety
Malaysia
Malaysia JSM Issues Draft Standard on Conductors for Overhead Lines (DMS IEC 62641:202X)
On August 15, 2024, the Department of Standards Malaysia (JSM) opened a public consultation for DMS IEC 62641:202X Conductors for overhead lines – Aluminium and Aluminium Alloy Wires for Concentric Lay Stranded Conductors (IEC 62641:2022, IDT).
The comment period is until October 14, 2024. To submit comments, use the F2 - Public comment form and send it to pc@jsm.gov.my.
Official sourceSafety
Thailand
Thailand MIND Announces New Industrial Product Standards for Conductive Charging of Electric Vehicles
On September 7, 2024, the Ministry of Industry (MIND) of Thailand announced the establishment of 3 new industrial product standard for Plugs, Socket-Outlets, Vehicle Connectors and Vehicle Inlets - Conductive Charging of Electric Vehicles. These are Part 3(1), Part 4 and Part 6 of TIS 62196 series.
This announcement took effect on September 8, 2024.
Official sourceSafety
Thailand
Thailand MIND Announces New Standard TIS 60335 Part 2(58)-2567 for Commercial Electric Dishwasher's Safety
On September 7, 2024, the Ministry of Industry (MIND) of Thailand announced a new industrial product standard, TIS 60335 Part 2(58)-2567 (2024) Safety of Electrical Appliances for Residential Use and Other Similar Electrical Appliances, Part 2 (58), Specific Requirements for Commercial Electric Dishwashers. This new standard revises the TIS 1839 - 2553 (2010): Household and Similar Electrical Appliances - Safety Part 2-58 Particular Requirements for Commercial Electric Dishwashing Machines (IEC 60335-2-58:2008, IDT).
This announcement will take effect a hundred and twenty days after its publication in the official gazette which is January 5, 2025.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN IEC 61084-2-2:2024/A11:2024 - Cable Trunking Systems and Cable Ducting Systems Intended for Mounting Underfloor, Flushfloor or Onfloor
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 61084-2-2:2024/A11:2024 for cable trunking systems and cable ducting systems for electrical installations - part 2-2: particular requirements - cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor.
Official sourceSafety
Global
ISO Publishes New Standard ISO 14119:2024 - Safety of Machinery - Interlocking Devices Associated with Guards
On September 10, 2024, the International Organization for Standardization (ISO) published ISO 14119:2024. This standard deals with safety or machinery particular for the principles for design and selection of interlocking devices associated with guard.
Official sourceSafety
Global
IEC Publishes New Standard IEC 60335-2-32:2024 - Safety Requirements for Massage Appliances
On September 12, 2024, the International Electrotechnical Commission (IEC) released IEC 60335-2-32:2024. This standard deals with household and similar electrical appliances particular for the safety requirements of massage appliances.
Official sourceSafety
India
India MHI Publishes Safety Regulation for Machinery and Electrical Equipment (Omnibus Technical Regulation)
On August 28, 2024, the Ministry of Heavy Industries (MHI) published Order No. S.O. 3649 for machinery and electrical equipment safety (omnibus technical regulation) order which will be mandatory on August 28, 2025.
Official sourceSafety
Global
IEC Publishes New Standard IEC 60335-2-61:2024 - Safety Requirements for Thermal Storage Room Heaters
On September 12, 2024, the International Electrotechnical Commission (IEC) released IEC 60335-2-61:2024. This standard deals with household and similar electrical appliances particular for the safety requirements for thermal storage room heaters.
Official sourceSafety
Global
IEC Publishes New Standard IEC 60335-2-62:2024 - Safety Requirements for Commercial Electric Rinsing Sinks
On September 12, 2024, the International Electrotechnical Commission (IEC) released IEC 60335-2-62:2024. This standard deals with household and similar electrical appliances particular for the safety requirements for commercial electric rinsing sinks.
Official sourceSafety
Thailand
Thailand MIND Announces New Industrial Product Standards for Lead-Acid Batteries
On September 7, 2024, the Ministry of Industry of Thailand announced the establishment of two industrial product standards for Lead Acid Batteries:
- TIS 60095 Part 6-2567 (2024): Lead-Acid Starter Batteries - Part 6: Batteries for Micro-Cycle Applications
- TIS 60095 Part 7-2567 (2024): Lead-Acid Starter Batteries - Part 7: General Requirements and Methods of Test for Motorcycle Batteries
This announcement took effect on September 8, 2024.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN IEC 61084-2-3:2024 - Slotted Cable Trunking Systems
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61084-2-3:2024 for cable trunking systems and cable ducting systems for electrical installations: particular requirements - slotted cable trunking systems intended for installation in cabinets.
The date of withdrawal of superseded version is August 5, 2029.
Official sourceSafety
Finland
Finland MSAH Consults on Draft Amending the Decree on the Labelling and other Appearance of Tobacco and Related Products and their Unit Packets
On September 16, 2024, the Finland Ministry of Social Affairs and Health (MSAH) published a draft decree amending the decree on the labelling and other appearance of tobacco and related products and their unit packets.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN IEC 61084-2-3:2024/A11:2024 - Slotted Cable Trunking Systems
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 61084-2-3:2024/A11:2024 for cable trunking systems and cable ducting systems for electrical installations: particular requirements - slotted cable trunking systems intended for installation in cabinets.
Official sourceSafety
Vietnam
Vietnam VSQI Publishes a Public Consultation on Draft Standard for Batteries Use in Stationary and Mobile Auxiliary Power Applications
On September 10, 2024, the Vietnam Standards and Quality Institute (VSQI) published a consultation on draft national standard for batteries use in stationary and mobile auxiliary power applications. This standard applies to battery systems used to store energy for stationary applications such as for PV, wind turbines and UPS.
The deadline for electronic comments is October 16, 2024 and can be sent thru email: http://tc2@vsqi.gov.vn.
Official sourceSafety
United Kingdom
United Kingdom DBT Issues Notice of Publication 0104/24 on the Designated Standards for Low Voltage Equipment
On September 17, 2024, the Department for Business and Trade (DBT) of the Government of UK issued the Notice of Publication 0104/24. This notice revised the references to standards for electrical equipment designed for use within certain voltage limits in support of the Electrical Equipment (Safety) Regulations 2016 (S.I. 2016/1101).
This amendment took effect on September 17, 2024.
Official sourceSafety
United Kingdom
United Kingdom DBT Issues Notice of Publication 0102/24 on the Designated Standards for Gas Appliances
On September 6, 2024, the Department for Business and Trade (DBT) of the Government of UK issued the Notice of Publication 0104/24 relating to the designated standards for gas appliances. This notice took effect on the same day.
Official sourceSafety
United Kingdom
United Kingdom DBT Issues Notice of Publication 0103/24 on the Designated Standards for Machinery
On September 6, 2024, the Department for Business and Trade (DBT) of the Government of UK issued Notice of Publication 0103/24 relating to the designated standards for Machinery. This notice took effect on the same day.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN IEC 61084-2-4:2024 - Cable Trunking Systems and Cable Ducting Systems for Service Poles and Posts
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61084-2-4:2024 for cable trunking systems and cable ducting systems for electrical installations: particular requirements - service poles and service posts.
The date of withdrawal of superseded version is August 5, 2029.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN IEC 61084-2-4:2024/A11:2024 - Cable Trunking Systems and Cable Ducting Systems for Service Poles and Posts
On September 13, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 61084-2-4:2024/A11:2024 for cable trunking systems and cable ducting systems for electrical installations: particular requirements - service poles and service posts.
Official sourceSafety
Thailand
Thailand MIND Announces Various Voluntary Industrial Product Standards
On September 7, 2024, the Ministry of Industry (MIND) of Thailand announced several new industrial product standards which includes the following:
- TIS 2144-2567 Insulated high-voltage cables and accessories for use with rated voltages above 30 kV up to and including 150 kV - Test methods and requirements
- TIS 2143 Part 1-2567 Insulated high-voltage electric cables and accessories for use with rated voltages from 1 kV to not more than 30 kV, Part 1 Electric cables for use with rated voltages of 1 kV and 3 kV
- TIS 384 Part 1-2567 Power transformers Part 1 General requirements
- TIS 60335 Part 2(60)-2567 Safety of household and similar electrical appliances - Part 2(60) - Particular requirements for hot tubs and hot tub spas
- TIS 60335 Part 2(38)-2567 Safety of household and similar electrical appliances - Part 2(38) - Particular requirements for commercial electric grills and barbecue grills
- TIS 60335 Part 2(36)-2567 Safety of household and similar electrical appliances - Part 2(36) - Particular requirements for commercial electric cookers, ovens, hobs and basic cooking components
- TIS 63024-2567 Required characteristics for automatic recovery circuit breakers (ARDs) for circuit breakers and residual current circuit breakers with or without overcurrent protection devices for residential and similar applications
- TIS 61058 Part 2(1)-2567 Electrical switches for electrical appliances - Part 2(1) Specific requirements for flexible cord switches
- TIS 2143 Part 4-2567 Insulated high-voltage cables and accessories for use with rated voltages from 1 kV to not more than 30 kV - Part 4 - Test requirements for cable accessories for rated voltages from 6 kV to not more than 30 kV
- TIS 2143 Part 2-2567 Insulated high-voltage electric cables and accessories for use with rated voltages from 1 kV to no more than 30 kV, Part 2 Electric cables for use with rated voltages from 6 kV to no more than 30 kV
- TIS 3759-2567 Tabletop electric oven.
Majority of the standards will take effect on January 5, 2025.
Official sourceSafety
EU
European Union (EC) Updates List of Harmonized Standards for Lifting Tables, Earth-Moving Machinery, Cranes and Power Operated Pedestrian Doorsets (Machinery Directive)
On September 16, 2024, the European Commission (EC) published Commission Implementing Decision (EU) 2024/2408 of 13 September 2024 amending Implementing Decision (EU) 2023/1586 in regards to harmonized standards for lifting tables, earth-moving machinery, cranes and power operated pedestrian doorsets.
The modified list of harmonized standards for machinery drafted in support of Directive 2006/42/EC enters in force on the day of publication September 16, 2024
Official sourceSafety
GCC
GCC Countries - GSO Gulf Type Examination Certification (G-Mark) Releases Implementation of IEC 60335-2-25:2024 for Microwave Ovens, Including Combination Microwave Ovens
On July 11, 2024, the International Electrotechnical Commission (IEC) released a new a standard IEC 60335-2-25:2024. This standard deals with the safety requirements for microwave ovens including combination microwave ovens for household and similar use.
This is part of the harmonized IEC standards to be used for the issuance of Gulf Type Examination Certificates and, therefore, certificates mentioning this standard will be updated considering the 2 years transition period.
Official sourceSafety
China
China MIIT Issues a Public Consultation on Mandatory National Standard for Safety Technical Specifications of Electric Bicycles
On September 19, 2024, the Ministry of Industry and Information Technology (MIIT) issued a public consultation on mandatory National Standard for safety technical specifications of electric bicycles.The deadline for soliciting opinions is October 19, 2024. Comments and opinions can be submitted via email to KJBZ@miit.gov.cn.
Official sourceSafety
Australia, New Zealand
Australia & New Zealand Publish Standard AS/NZS IEC 60076.11:2024 - Power Transformers, Dry-type Transformers
On September 20, 2024, the Standards Australia and New Zealand published standard AS/NZS IEC 60076.11:2024. This standard gives guidance to dry-type power transformers (including auto-transformers) having values of highest voltage for equipment up to and including 72.5 kV and at least one winding operating at greater than 1.1 kV.
Official sourceSafety
Turkey
Turkey MoIT Drafts a Communiqué to Amend the Mandatory Implementation of Turkish Standards (SGM 2022/40)
On September 23, 2024, the Ministry of Industry and Technology (MoIT) of Turkey proposed a draft amendment to the Communiqué on the Mandatory Implementation of Turkish Standards (SGM 2022/40 [https://www.resmigazete.gov.tr/eskiler/2023/05/20230511-5.htm]), which determine the implementation of mandatory Turkish Standards for specific products.
The consultation period for this draft will end on November 22, 2024.
Official sourceSafety
India
India DPIIT Releases Quality Control Order for Safety of Household, Commercial and Similar Electrical Appliances
On September 17, 2024, the Department for Promotion of Industry and Internal Trade (DPIIT) released Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2024, S.O. 4098(E). This order states the reference for certification by the manufacturer, enforcing authority and the date of implementation according to enterprises.
This Order was effective on September 17, 2024.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN 60400:2017/A2:2024 - Lampholders for Tubular Fluorescent Lamps and Starterholders
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60400:2017/A2:2024 for lampholders for tubular fluorescent lamps and starterholders.
Official sourceSafety, Chemicals
Denmark
Denmark Ministry of the Interior and Health Publishes Draft Order on Quality, Labeling and Age Control System of Electronic Cigarettes and Refill Containers
On September 2, 2024, the Denmark Ministry of the Interior and Health published a draft executive order on quality, labeling, and age control systems of electronic cigarettes, refill containers, etc. This mandates information dissemination on nicotine addiction counseling and ensuring electronic cigarettes and refill containers don't attract children and young people due to flavors and scents.
The feedback period is until December 3, 2024.
Official sourceSafety, EMC
South Korea
South Korea MOTIE Approves and Announces the Revision of KGS Codes
On August 30, 2024, the Ministry of Trade, Industry and Energy (MOTIE) of South Korea approved and announced the revision of Gas Detailed Standards commonly known as KGS Code as Notice No. 2024-646 in line with the requirements in High-Pressure Gas Safety Management Act.
The revision took effect on August 30, 2024
Official sourceSafety, MC, Wireless
Saudi Arabia
Saudi Arabia SASO Publishes Technical Regulation for Communications and Information Technology Devices
On August 16, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) published technical regulations for communications and information technology equipment (M.E-196-23-04-02-02).
Official sourceSafety, Performance
China
China CQC Announces the Implementation of New Certification Rules for Category 019001 Electric Energy Meter Performance Certification
On August 27, 2024, the China Quality Certification Center (CQC) announced the implementation of new certification rules for category 019001 electric energy meter performance certification. This rule applies to the CQC performance certification of electric energy meters.
Official sourceSafety, Performance
EU
European Union CEN Publishes New Standard EN ISO 80601-2-79:2024 - Medical Electrical Ventilatory Support Equipment
On September 4, 2024, the European Committee for Standardization (CEN) published a new standard EN ISO 80601-2-79:2024 for medical electrical equipment: particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment.
The date of withdrawal of superseded version is March 31, 2025.
Official sourceSafety, Performance
EU
European Union CEN Publishes New Standard EN ISO 80601-2-80:2024 - Medical Electrical Ventilatory Support Equipment for Ventilatory Insufficiency
On September 4, 2024, the European Committee for Standardization (CEN) published a new standard EN ISO 80601-2-80:2024 for medical electrical equipment: particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency.
The date of withdrawal of superseded version is March 31, 2025.
Official sourceSafety, Performance
EU
European Union CEN Publishes Amendment Standard EN 14382:2019+A1:2024 - Gas Safety Shut-Off Devices for Inlet Pressure Up To 10 MPa (100 bar)
On September 11, 2024, the European Committee for Standardization (CEN) published an amendment standard EN 14382:2019+A1:2024 for gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar).
The date of withdrawal of superseded version is March 31, 2025.
Official sourceSafety, Performance
Global
IEC Publishes New Standard IEC 80601-2-49:2018/AMD1:2024 - Requirements for the Basic Safety and Essential Performance of Multifunction Patient Monitors
On September 11, 2024, the International Electrotechnical Commission (IEC) released IEC 80601-2-49:2018/AMD1:2024. This standard deals with medical electrical equipment particular for the requirements for the basic safety and essential performance of multifunction patient monitors.
Official sourceSafety, Performance
Vietnam
Vietnam VSQI Publishes a Public Consultation on Draft Standard for LED Lamps, LED Luminaires and LED Lighting Sources
On September 18, 2024, the Vietnam Standards and Quality Institute (VSQI) published a consultation on draft national standard for LED bulbs, LED lamps and LED lighting sources. This standard specifies the requirements for the measurement of electrical, optical and color quantities of LED lamps, LED modules and LED luminaires, for operation from AC or DC which may be combined with LED control gear.
The deadline for electronic comments is on November 18, 2024 and can be sent thru email: http://tc2@vsqi.gov.vn.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes Amended Standard EN IEC 60601-2-2:2018/A1:2024 - High Frequency Surgical Equipment and High Frequency Surgical Accessories
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 60601-2-2:2018/A1:2024 for medical electrical equipment: particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes Amended Standard EN 60601-2-3:2015/A2:2024 - Short-Wave Therapy Medical Electrical Equipment
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60601-2-3:2015/A2:2024 for medical electrical equipment: particular requirements for the basic safety and essential performance of short-wave therapy equipment.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes Amended Standard EN 60601-2-6:2015/A2:2024 - Microwave Therapy Medical Electrical Equipment
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60601-2-6:2015/A2:2024 for medical electrical equipment: particular requirements for the basic safety and essential performance of microwave therapy equipment.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes Amended Standard EN 60601-2-10:2015/A2:2024 - Medical Electrical Equipment for Nerve and Muscle Stimulators
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60601-2-10:2015/A2:2024 for medical electrical equipment: particular requirements for the basic safety and essential performance of nerve and muscle stimulators.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes New Standard EN IEC 60601-2-33:2024 - Magnetic Resonance Equipment for Medical Diagnosis
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 60601-2-33:2024 for medical electrical equipment: particular requirements for the basic safety and essential performance of magnetic resonance equipment for
medical diagnosis.
The date of withdrawal of superseded version is September 20, 2027.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes Amended Standard EN 60601-2-45:2011/A2:2024 - Mammographic X-Ray Equipment and Mammographic Stereotactic Devices
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60601-2-45:2011/A2:2024 for medical electrical equipment: particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes New Standard EN IEC 60601-2-46:2024 - Operating Tables for Medical Electrical Equipment
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 60601-2-46:2024 for medical electrical equipment: particular requirements for the basic safety and essential performance of operating tables.
The date of withdrawal of superseded version is July 31, 2027.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes New Standard EN IEC 60601-2-54:2024 - X-Ray Equipment for Radiography and Radioscopy
On September 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 60601-2-54:2024 for medical electrical equipment: particular requirements for the basic safety and essential performance of x-ray equipment for radiography and radioscopy.
The date of withdrawal of superseded version is July 31, 2027.
Official sourceSafety, Performance, Energy Efficiency; Wireless
Mexico
Mexico SE Publishes Draft of Regulations of the Quality Infrastructure Law
On August 29, 2024, the Secretary of Economy (SE) of Mexico published the draft Regulation of the Quality Infrastructure Law, which serves as the regulatory framework for quality infrastructure in Mexico.
Comments may be submitted to https://www.cofemersimir.gob.mx/sessions/login. No due date for comments has been provided.
Official sourceSafety, Wireless
Taiwan
Taiwan MOTC Releases Draft Amendment on Remote Control Drone Management Regulation
On August 5, 2024, the Ministry of Transportation and Communications (MOTC) released draft amendment on remote control drone management regulation to ensure safety in drone operations for public comments until September 4, 2024.
Official sourceSafety
Global, CB Scheme
IECEE Includes New Standard for the Month of August 2024
On August 2024, new standard was included in the IECEE System.
Official sourceSafety
GCC
GCC Countries - GSO Gulf Type Examination Certification (G-Mark) Releases Implementation of IEC 60335-2-6:2024 for Stationary Electric Cooking Appliances
On August 23, 2024, the International Electrotechnical Commission (IEC) released a new standard IEC 60335-2-6:2024. This standard deals with the safety requirements for stationary cooking ranges, hobs, ovens and similar appliances.This is part of the harmonized IEC standards to be used for the issuance of Gulf Type Examination Certificates and, therefore, certificates mentioning this standard will be updated considering the 2 years transition period.
Official sourceSafety
GCC
GCC Countries - GSO Gulf Type Examination Certification (G-Mark) Releases Implementation of IEC 60335-2-12:2024 for Warming Plates and Similar Appliances
On August 23, 2024, the International Electrotechnical Commission (IEC) released a new standard IEC 60335-2-12:2024. This standard deals with the safety of electric warming plates, warming trays and similar appliances intended to keep food or vessels warm.
This is part of the harmonized IEC standards to be used for the issuance of Gulf Type Examination Certificates and, therefore, certificates mentioning this standard will be updated considering the 2 years transition period.
Official sourceSafety
Global, CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 36 (2024-W36)
On September 4, 2024, new TRFs were published and added to the IECEE website.
Official sourceSanitation
Brazil
Brazil ANVISA Publishes Draft Amendment to Technical Regulation on Food Contact Cellulosic Materials, Packaging and Equipment
On August 29, 2024, Brazil National Health Surveillance Agency (ANVISA) published Public Consult N° 1276 Proposed Amendment to the Resolution of the Collegiate Council - RDC No. 88, of June 29, 2016, which is the technical regulation on cellulosic materials, packaging, and equipment intended to come
into contact with food and other contained provisions. This addresses the need to review the restriction on the quantity of diisopropylnaphthalene (DIPN) contaminants.
The consultation period is from September 4, 2024, to October 21, 2024.
Official sourceSanitation
Australia
Australia ABCB Issues New Edition of WaterMark Schedule of Excluded Products
On August 1, 2024, the Australia Building Codes Board (ABCB) published the new edition of WaterMark Schedule of Excluded Products which enlists products that have been predetermined to be excluded from WaterMark certification.
Official sourceSanitation
Japan
Japan Government Publishes Draft Revision on Food and Food Additives Specifications and Standards
On September 10, 2024, the Government of Japan published the draft revision of the Specifications and Standards for Foods, Food additives, etc. through the WTO website. This partially revises Chapter III: Apparatus, and Containers and Packaging in the Public Notice No. 370 under Food Sanitation Act (Act No. 233 of 1947).
The feedback period is until November 9, 2024.
Official sourceSanitation
Australia
Australia ABCB Issues September 2024 Edition of WaterMark Schedule of Products
On September 1, 2024, the Australia Building Codes Board (ABCB) published Edition 2024-3 of the WaterMark Schedule of Products which contains the list of products predetermined to require Watermark Certification.
This edition replaces Edition 2024-2 which was published on June 1, 2024.
Official sourceSanitation
Germany
Germany BFR Publishes Updated Recommendation on Natural and Synthetic Rubber Food Contact Materials
On September 1, 2024, the German Federal Institute for Risk Assessment (Bundesinstitut für Risikobewertung - BfR) published revised recommendations on commodities based on natural and synthetic rubber which includes those that would come into contact with food.
Official sourceSanitation
China
China CFSA Seeks Comments on Six New Food-Related Products
On September 2, 2024, the China National Center for Food Safety Risk Assessment (CFSA) requested public feedback on six food-related materials, of which four are additives for food contact materials (FCM) and products, one new type of resin for FCM and products, and one expanding the using scope of resins for FCM and products.
The public comments were open until October 2, 2024.
Official sourceSustainability
USA Michigan
USA - Michigan House of Representatives Publishes Bill to Introduce Packaging Reduction and Recycling Program
On August 1, 2024, the Michigan House of Representatives published House Bill No. 5902 of 2024 which amends 1994 PA 451 entitled Natural Resources and Environmental Protection Act, by adding part 177 which is the Packaging Reduction and Recycling Program.
This amendatory act, if approved, will take effect on January 1, 2025.
Official sourceSustainability
Philippines
Philippines EMB Notifies Plastic Waste Reduction Target of 40% by the End of 2024
On August 6, 2024, the Philippines Environmental Management Bureau (EMB) notified the importance of enterprises registering their Extended Producer Responsibility (EPR) programs to meet the goal of reducing plastic waste by 40% by the end of 2024. The EPR Act of 2022 (R.A. 11898) was published in July 2022 and has been implemented for more than two years through programs focusing on plastic waste reduction, recovery, and diversion activities.
Official sourceSustainability
South Korea
South Korea KATS Publishes Notice of Establishment of Quality Certification Standards for Excellent Recycled Products (GR)
On August 22, 2024, the Korean Agency for Technology and Standards (KATS) published a notice of establishment of quality certification standards for excellent recycled products (GR).
Official sourceSustainability
Denmark
Denmark Ministry of the Environment Publishes Draft Order on Packaging Requirements and Extended Producer Responsibility for Packaging and Other Waste
On September 16, 2024, the Denmark Ministry of the Environment published a draft decree on certain requirements for packaging, extended producer responsibility for packaging and other waste that is collected with packaging waste. It discusses the responsibilities of producers, distributors, and municipal councils, as well as reporting and payment requirements for waste treatment. The draft also mentions the implementation of European directives and regulations, criteria for packaging design, and steps for enforcement and compliance. Additionally, it outlines preparing annual statements for non-packaging waste, including calculations of costs and payments collected or paid out by producers to municipal councils.
The feedback period is until December 17, 2024.
Official sourceSustainability
China
China CHEAA Publishes Technical Specifications of Recycled Plastics in Household Electrical Appliances
On August 5, 2024, the China Household Electrical Appliances Association (CHEAA) published Technical Specifications of Recycled Plastics for Household Electrical Appliances (T/CHEAA 0034-2024). This specifies the technical requirements for the use and labeling of recycled plastics in household appliances. It provides the test methods, calculation method corresponding to the recycled plastics, the guidance of quality control, and defines relevant technical terms and definitions.
This is not a mandatory standard, but it can serve as a guide for the electrical appliance manufacturers upon using recycled plastics. It will take effect on January 1, 2025.
Official sourceSustainability
South Korea
South Korea Ministry of Environment Publishes Draft Administrative Notice of Partial Revision of Eco-Label Products and Certification Standards
On August 21, 2024, the Ministry of Environment published a draft administrative notice related to partial revision of Eco-Label Products and Certification Standards. The revision is mainly related to product scope under eco-label certification and updated standards.The deadline for comments was September 11, 2024.
Official sourceSustainability
South Korea
South Korea Ministry of Environment Establishes Certification System for Use of Recycled Materials in Home Appliances
On July 19, 2024, the Ministry of Environment of South Korea announced a Memorandum of Understanding (MoU) on Cooperation with home appliance manufacturers (LG Electronics, Samsung Electronics), recycling company (CNTech Korea), and E-Circulation Governance at Lotte Hotel Seoul for the Establishment of a Standardized Management System for Use of Recycled Plastic Materials in Electrical and Electronic Products.
Official sourceWireless
Peru
Peru Executive Branch Publishes Legislative Decree to Promote Deployment of 5G Services
On August 17, 2024, the Executive Branch of Peru published Legislative Decree No. 1627 to Promote the Deployment of Public Telecommunications Services through Fifth Generation (5G) Technology or Higher. This authorizes the MTC to allocate radio spectrum directly to interested companies for the provision of public telecommunications services using 5G or higher technology.
Official sourceWireless
Moldova
Moldova ANRCETI Publishes Decision on the Approval of Payments for Conformity Assessment and Product Certification According to the Scope of Accreditation
On August 23, 2024, the National Agency for Regulation in Electronic Communications and Information Technology (ANRCETI) of the Republic of Moldova published Decision on the Approval of Payments for Conformity Assessment and Product Certification According to the Scope of Accreditation (HCA No. 28 of 23.08.2024).
Official sourceWireless
Mauritius
Mauritius ICTA Opens a Public Consultation on Making Available Additional Spectrum for IMT
On August 23, 2024, the Information & Communication Technologies Authority (ICTA) of Mauritius opened a public consultation on Consultation Paper on Making Available Additional Spectrum for IMT (Consultation Ref: ICTA/2024/01).
Comments were accepted until September 13, 2024.
Official sourceWireless
Bahamas
Bahamas UCRA Opens a Public Consultation on the Roadmap to Enable 5G Deployment in the Country
On August 22, 2024, the Utilities Regulation & Competition Authority (UCRA) published a consultation document on the roadmap to enable 5G deployment in the Bahamas. This helps to enhance the efficiency of the Bahamian electronic communications sector
Comments were accepted until October 7, 2024
Official sourceWireless
Mexico
Mexico IFT Releases Position on the Proposal of its Dissolution
On August 23, 2024, the Mexico Federal Telecommunications Institute (IFT) released its position in relation to the approval of the Opinion of the Constitutional Matters Committee of the Chamber of Deputies, on the Initiative With Draft Decree by which the Modification of Various Articles of the Political Constitution of the United Mexican States is Proposed, in the Matter of Organic Simplification.
Official sourceWireless
Jordan
Jordan TRC Publishes Updates on Instructions for Obtaining Type Approval for Communications Devices
On July 30, 2024, the Telecommunications Regulatory Commission published an updated Instructions for Obtaining Type Approval for Communications Devices and Regulating their Entry into the Kingdom. The updates touch on the provisions on validity, exemptions and labels.
This latest version came into effect on September 15, 2024.
Official sourceWireless
Moldova
Moldova ANRCETI Publishes the Amendment on the Use of License-Exempt Bands
On August 23, 2024, the National Agency for Regulation in Communications and Information Technology (ANRCETI) of the Republic of Moldova published under Decision No. 31 of 23-08-2024 the amendment of the Annex to the regarding the establishment of the categories of radio frequencies and radio equipment whose use is allowed without obtaining a license or technical permit.
Official sourceWireless
Brazil
Brazil ANATEL Publishes Amendments to the Technical Requirements for Assessing the Conformity of Access Data Transmission Cable with Flexible or Solid Conductor
On August 14, 2024, the National Telecommunications Agency (ANATEL) published Act No. 11264, of August 2, 2024. This amends the annex of Act No. 386, of January 16, 2023 which approves the technical requirements for the conformity assessment of access data transmission cable with flexible or solid conductor - categories 7, 7A and 8 with a capacity of four pairs and categories 3, 5e, 6 and 6A with a capacity of two or four pairs.
The amendments are enforced on the same day as the publish date mentioned above.
Official sourceWireless
Mexico
Mexico IFT Opens a Public Consultation on Technical Conditions for the Use of the 64-71 GHz Band
On August 22, 2024, the Federal Telecommunications Institute (IFT) of Mexico opened a public consultation on the draft of the Agreement by which the Plenary of the Federal Telecommunications Institute Classifies the Frequency Band 64-71 GHz as Free Spectrum and Issues the Technical Conditions of Operation of the Band.
Comments were accepted until September 20, 2024.
Official sourceWireless
Hong Kong
Hong Kong OFCA Updates Performance Specification for Radiocommunications Apparatus Operating in the 2.4 GHz or 5 GHz Band (HKCA 1039)
On August 2024, the Office of the Communications Authority (OFCA) published HKCA 1039 Issue 7 Performance Specification for Radiocommunications Apparatus Operating in the 2.4 GHz or 5 GHz Band and Employing Frequency Hopping or Digital Modulation, which will be effective on the same day.
Official sourceWireless
Chile
Chile SUBTEL Modifies the Technical Standard for the Use of the Frequency Bands 3.30 - 3.40 GHz and 3.60 - 3.65 GHz
On August 22, 2024, the Undersecretariat of Telecommunications (SUBTEL) of Chile published Resolution No. 1555 exempt. This modifies Resolution No. 547 exempt, of 2020 which is the technical standard of 3.30 - 3.65 GHz band and repeals Resolution No. 1498 exempt, of 1999, which regulates the 3,400 - 3,600 MHz frequency band.
This resolution was effective upon published date mentioned.
Note: There was a deadline granted to the concessionaires (10 business days, counted from the date of publication).
Official sourceWireless
India
India TEC Opens a Consultation for the Adoption of TSDSI TD 5002 V1.0.0, A Generic Relay Architecture for 5G & Beyond
On September 2, 2024, the Telecommunications Centre (TEC) of India released a notification on the adoption of TSDSI TD 5002 V1.0.0 A Generic Relay Architecture for 5G & Beyond as a national standard for the public consultation.
Comments were accepted until October 2, 2024.
Official sourceWireless
Mexico
Mexico IFT Publishes Modified National Frequency Allocation Table
On September 10, 2024, the Federal Telecommunications Institute (IFT) of Mexico published Agreement by which the Plenary Session of the Federal Telecommunications Institute Modifies the National Frequency Allocation Table. The Agreement took effect on September 11, 2024, with the exception of the modification of the 17.3-17.7 GHz frequency band, which will enter into force on January 1, 2025.
Official sourceWireless
India
India Ministry of Communications Releases a Memorandum Regarding Type Approval for License-Exempt Wireless Equipment Devices
On September 9, 2024, the Ministry of Communications released a memorandum on Issuance of Equipment Type Approval (ETA) for License-Exempt Wireless Equipment. This is to further promote ease of doing business in telecom sector devices.
Official sourceWireless
Laos
Laos MTC Publishes Updated Requirements of Electromagnetic Field Strength of Cellular Base Stations
On September 2, 2024, the Ministry of Technology and Communication (MTC) of Laos published Agreement on the Safety Management of Electromagnetic Field Strength of Mobile Phone Signal Receiving Stations (Notice No. 3560/KTS of 2024), which takes effect on October 17, 2024.
Official sourceWireless
Mexico
Mexico IFT Publishes Technical Conditions for the Use of the 57-64 GHz Band
On September 10, 2024, the Federal Telecommunications Institute (IFT) of Mexico published Agreement by which the Plenary Session of the Federal Telecommunications Institute Modifies the Technical Operating Conditions for the Use of the 57 - 64 GHz Frequency Band, Classified as Free Spectrum, which took effect on September 11, 2024.
Official sourceWireless
Saudi Arabia
Saudi Arabia CST Opens Public Consultation on Spectrum Outlook for Commercial and Innovative Use
On September 9, 2024, the Communications, Space & Technology Commission (CST) of Saudi Arabia published Public Consultation on: Spectrum Outlook for Commercial and Innovative Use 2024-2027.
Comments were accepted until October 7, 2024.
Official sourceWireless
Vietnam
Vietnam MIC Releases Circular on the Suspension of Some Contents of 900 MHz and 1800 MHz Cellular Band Planning Circulars
On September 13, 2024, the Ministry of Information and Communication (MIC) of Vietnam released Circular No. 10/2024/TT-BTTTT regarding the suspension of some contents of Circular No. 03/2024/TT-BTTTT Planning for the 1710-1785 MHz and 1805-1880 MHz frequency bands for Vietnam's IMT public terrestrial mobile communication system and Circular No. 04/2024/TT-BTTTT Planning the 880-915 MHz band and 925-960 MHz for Vietnam's IMT public land mobile communication system. This Circular took effect on September 16, 2024.
Official sourceWireless
Australia
Australia ACMA Opens a Proposal to Remake the Radiocommunications (Interpretation) Determination 2015
On September 3, 2024, the Australian Communications and Media Authority (ACMA) announced the initiative to remake the Radiocommunications (Interpretation) Determination 2015 with minor changes before it sunsets. This document contains the definitions of expressions used in legislative instruments relating to radiocommunications services and the licensing in Australia.
Consultation closes on October 18, 2024 and submission can be made using this link.
Official sourceWireless
Georgia
Georgia COMCOM Updates National Plan for the Distribution of Radio Frequency Spectrum
On August 5, 2024, the Communications Commission (COMCOM) published Resolution No. 9 on the Approval of the National Plan for the Distribution of Radio Frequency Spectrum of the National Communications Commission of Georgia dated June 30, 2006 No. 6. This contains the list of frequency ranges and their applications, that is allowed in the country.
This resolution took effect upon publication date mentioned above.
Official sourceWireless
India
India TEC Issues Clarification on Security Certification for End of Sale and End of Life Products
On September 19, 2024, the Telecommunication Engineering Center of India released Clarification on Security certification for End of Sale (EoS) and End of Life (EoL) Products. This letter provides definitions and additional conditions in support of the previously released letter on End of Life/ End of Sale whole unit
warranty replacement products notified under various Phases of MTCTE last March 2024.
Official sourceWireless
India
India WPC Wing Publishes Guideline for Issuing Experimental and Demonstration Licenses
On September 9, 2024, the Wireless Planning and Coordination (WPC) Wing, DOT, issued an office memorandum regarding additional guidelines for issuing Experimental and Demonstration Licenses which is guided by WPC Wing OM No. R-14016/0112019-NT(Pt) dated July 23, 2019.
This office memorandum will take effect from the date of issue of O.M.
Official sourceWireless
Brazil
Brazil ANATEL Publishes Amendments to the Technical Requirements for Assessing the Conformity of Signal Blockers
On August 22, 2024, the National Telecommunications Agency (ANATEL) published Act No. 10974, of July 25, 2024. This amends Annex I of Act No. 954, of February 8, 2018, which approves the technical requirements for assessing the conformity and approval of radiocommunications signal blockers.
The amendments were enforced on the same day as publishing as mentioned above.
Official sourceWireless, Cyber Security
Brazil
Brazil ANATEL Updates List of Technical Requirements for Telecommunications Products (Category II)
On August 29, 2024, the National Telecommunications Agency (ANATEL) published updates for the List of Technical Requirements for Telecommunications Products - Category II. Normative references for conformity of affected products are established.
Updates were effective upon the published date mentioned.
Official sourceWireless, Cyber Security
India
India Ministry of Communications Publishes Notification on the Draft Telecommunications (Critical Telecommunication Infrastructure) Rules, 2024
On August 30, 2024, the Ministry of Communications of India published the draft Telecommunications (Critical Telecommunication Infrastructure) Rules, 2024 on its official gazette for the public consultation, which issued on August 28, 2024.
Comments or suggestions were accepted until September 27, 2024.
Official sourceWireless, EMC
Hong Kong
Hong Kong OFCA Publishes Guideline on How to Apply Certification of Wireline CPE (OFCA I 412 Issue 15)
On August 2024, the Office of the Communications Authority (OFCA), published OFCA I 412 (24) Issue 15 How to Apply for Certification of Wireline Customer Premises Equipment to be Connected to the Public Telecommunications Networks (PTN) in Hong Kong. It was effective on the same day.
Official sourceWireless, Safety
Brazil
Brazil ANATEL Publishes Amendments to the Technical Requirements for Assessing the Conformity of Horizontal Data Transmission Cable
On August 14, 2024, the National Telecommunications Agency (ANATEL) published Act No. 11263 of August 2, 2024. This amends the Annex to Act No. 385, of January 16, 2023, which approves the technical requirements for assessing the conformity of horizontal data transmission cable with solid conductor - categories 7, 7A and 8 with capacity of four pairs and categories 3, 5e, 6 and 6A with capacity of two or four pairs.
The amendments were enforced on the same day as publish date mentioned above.
Official sourceWireless, Safety
Hong Kong
Hong Kong OFCA Publishes Conformance Specification for Radiation Safety of Wireless Devices (HKCA 1084)
On August 26, 2024, the Office of the Communications Authority (OFCA) published HKCA 1084 Issue 1 Conformance Specification for Radiation Safety of Wireless Devices to set out the conformity requirements for radiation safety of wireless devices operating in close proximity (up to 20 cm) to human. It was effective on the same day.
Official sourceWireless, Safety, EMC
Indonesia
Indonesia KOMINFO Releases Draft Technical Standards for Microwave Link Telecommunication Devices
On August 30, 2024, the Ministry of Communication and Information Technology, Indonesia (KOMINFO) released a draft for Technical Standards for Telecommunication Equipment and/or Microwave Link Telecommunication Devices. The technical standards for microwave link telecommunications devices operating in the 17.7–19.7 GHz radio frequency band are only valid until December 31, 2027.
Comments were accepted until September 13, 2024.
Official sourceWireless, Safety
Hong Kong
Hong Kong OFCA Updates Safety and Electrical Protection Requirements for Subscriber Telecommunications Equipment (HKCA 2001)
On August 26, 2024, the Office of the Communications Authority (OFCA) published HKCA 2001 Issue 15 Compliance Test Specification - Safety and Electrical Protection Requirements for Subscriber Telecommunications Equipment to specify the transitional arrangement for radiation protection. It was effective on the same day.
Official source- Replacing of information for:
- August 2024 updates
Regulation
Country
Summary
Sustainability Belgium Belgium Introduces Repairability Index for Eight Product Categories
On September 4, 2024, three Decrees have been published in Belgium Official Gazette, implementing measures related to repairability index, scored from 1 to 10, for eight product categories, as introduced by the framework “Act respecting the promotion of repairability and durability of goods” (the Act) adopted on March 17, 2024.
These Decrees, which will enter into force on May 2, 2025, determine:
- The list of goods covered by the repairability index, the technical standards used to establish the scores and the method of calculating the index
- The procedures for communicating the index and its format; and
- Terms and conditions for the display of the index.
Starting from May 2, 2025, publication date of the Act, the repairability index will be gradually implemented over 18 months and 24 months, respectively for large and small enterprises.
Products covered by the repairability index are dishwashers, vacuum cleaners, high-pressure cleaners, lawnmowers, laptops (excluding tablets), bicycles, e-bikes and e-scooters.
Textiles, Apparel and Footwear Japan Japan Proposes to Revise Textile Goods Quality Labeling Regulation
Japan’s Consumer Affairs Agency has proposed to revise Textile Goods Quality Labeling Regulation.
The proposed revision aims to provide consumers with more accurate quality information for their choice and revises Textile Goods Quality Labeling Regulation (Public Notice of the Consumer Affairs Agency No.4 of March 30, 2017) pursuant to the provision of the Household Goods Quality Labeling Act (Act No.104 of 1962).
Specifically, the revision will be established in accordance with the revision of the Japanese Industrial Standard (JIS L0001) on "Display symbols and their display methods for handling textile products."
Transitional measures will be put in place to inform businesses and allow them to prepare and labeling on textile products between the effective date and August 19, 2025 will still be allowed according to the previous rules.
Consumer Products France France Issues Notice relating to the Ban on Packaging Made Entirely or Partly from Styrenic Polymers
France issued a notice relating to the application of article 23 of the Law No. 2021-1104 of August 22, 2021, on the fight against climate change and strengthening resilience, which contained a prohibition of packaging made in whole or in part of styrenic polymers or copolymers, non-recyclable and unable to integrate a recycling channel, as of January 1, 2025.
This new notice recognized a risk of contrariety with the future European Regulation on packaging and packaging waste and limits the application of the ban to packaging that does not fall within the A, B or C recyclability performance classes mentioned in Article 6 of the current draft of the European regulation.
Notably the European regulation referred to in the notice is still in draft and the corresponding requirements of the regulation might become applicable from 2028 or 2030.Chemicals European Union EC Publishes Commission Delegated Regulation (EU) 2024/2555 amending Regulation (EU) 2019/1021 as regards hexabromocyclododecane
On September 27, the European Commission has published Commission Delegated Regulation (EU) 2024/2555 amending Regulation (EU) 2019/1021 as regards hexabromocyclododecane.
This Regulation amends Annex I to Regulation (EU) 2019/1021 on persistent organic pollutants. Specifically, this shall apply to concentrations of hexabromocyclododecane equal to or below 75 mg/kg (0,0075 % by weight) where it is present in substances, mixtures, articles or as constituents of the flame-retarded articles. For the use of recycled polystyrene in the production of EPS and XPS insulation material for use in buildings or civil engineering works, point (b) shall apply to concentrations of hexabromocyclododecane equal to or below 100 mg/kg (0,01 % by weight).
The exemptions laid down in this Regulation shall be reviewed and assessed by the Commission by January 1, 2026.
Toys and Children's Products Japan Japan Publishes Cabinet Decision on the Bill to Amend Consumer Product Safety Act Related to Toys and Children's Products
Japan’s Ministry of Economy, Trade and Industry published Cabinet Decision on the Bill for the Act for Partially Amending the Consumer Product Safety Act and Other Related Acts - Safety of Products for Children, e.g., Toys.
The revised Act aims to stipulate provisions in which: the manufacturers and importers of specified products for children (mainly products that are utilized primarily in children's everyday lives and require indication of the intended age range and precautions for use) are required to have the products meet the technical standards stipulated by the Government of Japan and indicate a warning about using the products, including the intended age range and precautions for use.
Hardlines Canada Health Canada Announces Proposal to Update National Standard for Tents
Health Canada has announced that the Canadian General Standards Board (CGSB) is proposing a minor update on the National Standard of Canada for tents.
The proposed updated version of CAN/CGSB-182.1, Flammability and Labelling Requirements for Tents, is available from the CGSB for a 60-day public review. Health Canada encourages all interested parties to review the standard and provide feedback directly to the CGSB by their closing date of November 16, 2024.
In 2023, Health Canada published a proposal to update the flammability and fire-safety labelling requirements in the Tents Regulations using an ambulatory reference to the CAN/CGSB-182.1-2020 standard. The proposal includes compliance periods that apply when the CGSB standard is updated.
Chemicals European Union EC Publishes Commission Delegated Regulation (EU) 2024/2564 amending Regulation (EC) No 1272/2008 as regards the harmonised classification and labelling of certain substances
On September 30, the European Commission has published Commission Delegated Regulation (EU) 2024/2564 amending Regulation (EC) No 1272/2008 of the European Parliament and of the Council as regards the harmonised classification and labelling of certain substances.
This Regulation amends Annex VI to Regulation (EC) No 1272/2008 by adding new substances to the list of harmonised and classified substances under the CLP regulation.
It shall apply from May 1, 2026. However, substances and mixtures may be classified, labelled and packaged in accordance with Regulation (EC) No 1272/2008 as amended by this Regulation from October 20, 2024.
Chemicals South Korea South Korea Drafts Special Bill on the Reduction and Management of Microplastics
South Korea has drafted a special bill on the reduction and management of microplastics. Through this initiative, the Korean government aims to protect public health and the environment from the harms of microplastics by enacting a law that establishes a comprehensive response system such as conducting a fact-finding survey on microplastics, regulating used emissions, and promoting mitigation and removal technologies.
The highlights of the bill include:
- Definition of microplastics
- Prohibition of the sale or manufacture of products that contain primary microplastics above safety standards
- Prohibits the sale, manufacture, and import of plastic products or electrical and electronic products that may cause secondary microplastics
Consumer Products Québec, Canada Canada: Québec Publishes Final Version of Chapter C-11 Charter of the French Language
The Quebec government published its final version of Chapter C-11 Charter of the French Language.
This aligns the new regulation with an existing legislation "Charger of the French language", modified by Bill 96 from 2022. It details circumstances in which trademarks may appear, particularly in advertising, as well as on products, public signs, and posters. Specifically, this clarifies the rules for displaying trademarks and other texts on public signs and in advertising, including the requirement for French to be “markedly predominant” on exterior signs.
Provisions specific to labeling of products comes into force on June 1, 2025, with an anticipated second set of regulations coming some time afterward.Hardlines - Furniture China China Publishes Mandatory Standards for Furniture
The Standardization Administration of China has published two mandatory standards for furniture.
The standards are:
- GB 28008-2024 Technical Specifications for Structural Safety of Furniture.
This document specifies general safety requirements for furniture structure and safety requirements for products with specific structures.
This document is applicable to furniture other than infants' and children's furniture.
Publication Date: June 25, 2024
Implementation Date: July 1, 2025. - GB 17927-2024 Safety Technical Specifications for Flame Retardant Performance of Furniture
This document specifies terms and definitions, requirements, test methods, inspection rules and identification of fire retardant for furniture.
This document applies to upholstered furniture and furniture with soft wrapping.
Publication Date: August 23, 2024
Implementation Date: September 1, 2025.
Toys and Children's Products, Electrical and Electronics, Hardlines China China Publishes GB 44246-2024 Safety Technical Specifications for Electrical Parts of Household and Similar Electrical Appliances, Sporting Goods and Electric Toys
The Standardization Administration of China has published GB 44246-2024 Safety Technical Specifications for Electrical Parts of Household and Similar Electrical Appliances, Sporting Goods and Electric Toys.
This document specifies terms and definitions, general requirements, product safety requirements, marking and description requirements of household and similar electrical appliances, electrical parts of sporting goods and electric toys, as well as installation, maintenance and repair requirements for household and similar electrical appliances and electrical parts of sporting goods, and describes the corresponding verification methods.
This document is applicable to the design, production, inspection and use of household and similar electrical appliances, electrical parts of sporting goods and electric toys, as well as installation, maintenance and repair of household appliances and electrical parts of sporting goods.Juvenile Products China China Issues GB 28007-2024 - Safety Technical Specifications for Infant and Children's Furniture
The Standardization Administration of China has issued GB 28007-2024 - Safety Technical Specifications for Infant and Children's Furniture.
This document specifies the general safety requirements and product-specific safety requirements for furniture used by infants and children aged 0 to 14 years old. This document is applicable to the design, manufacture, sales and service, quality and safety inspection, and evaluation of furniture for infants and children.
This standard will be implemented on January 1, 2026.Juvenile Products and Toys and Children's Products China China Notifies WTO on the Draft Standards for Child Care Standards and Children's Ride-on and Activity Articles
On August 27, the Standardization Administration of China has notified the World Trade Organization (WTO) on the Draft Standards for Child Care Standards and Children's Ride-on and Activity Articles.
The standards are:- National Standard of General safety requirements for child care articles
- This document specifies the general safety requirements for child care articles which are designed or obviously intended for children of 48 months and below of age as an aid to infant seating, bathing, general care, sleeping, carrying, and child protection.
- National Standard of General safety requirements for children's ride-on and activity articles
- This document specifies the general safety requirements for children's ride-on and activity articles designed or intended for children under 14 years of age, including mechanical and physical properties, thermal hazard and flame-retardant requirements, chemical safety, electrical safety, product identification, radiation safety, etc.
Chemicals European Union EU: ECHA Issues Guidance Document on Complying with CLP when Making or Importing Candles
In August 2024, the European Chemicals Agency (ECHA) has issued a guidance document on Complying with Regulation (EC) No 1272/2008 on the classification, labelling and packaging of substances and mixtures (CLP Regulation) when making or importing candles.
This document aims to assist users in complying with their obligations under the CLP Regulation when importing or manufacturing candles. This document outlines the legal obligations, labeling and packaging requirements and classification of candle mixture.
ECHA also provides information on CLP on their website, under ‘Guidance on CLP’: https://echa.europa.eu/guidance-documents/guidance-on-clpToys and Children's Products United Kingdom UK Issues Product Safety Alert for Water Beads
On September 19, UK’s Office for Product Safety and Standards (OPSS) issued a Product Safety Alert to warn of the risks that water beads can pose to children and vulnerable adults.
The Alert advises that water beads should be kept away from young children under 5 years of age, and only used with older children or vulnerable adults under close supervision.
Water beads (also known as superabsorbent polymers) are beads that can expand up to 400 times their original size when exposed to liquid, which means they can pose a serious risk of gastrointestinal blockage if ingested, or asphyxiation if inhaled into airways. They are marketed for various purposes, including for use as toys, in crafting, as home decor or in floristry. They are sold under a variety of names including, but not limited to, jelly balls, water balls, sensory beads or water crystals.Juvenile Products China China publishes draft standard for children’s products
On August 27, the Standardization Administration of China has notified the World Trade Organization (WTO) on the draft standard for children’s products.
This draft standard specifies the general safety requirements for products (including trial products and free gifts) designed or intended for use by children under 14 years of age.
The draft is still in the early stages and possible changes to the text are expected. Once the draft is finalized and published, the standard is expected to have a 2-3-year timeframe for compliance.Food Contact Materials Germany Germany BFR Releases Latest Version of BfR Recommendations on Food Contact Materials made of Natural and Synthetic Rubber
On September 1, the German Federal Institute for Risk Assessment has released the latest version of the BfR Recommendations on Food Contact Materials for natural and synthetic rubber.
This latest version of BfR Recommendations on Food Contact Materials provides the following changes:- Recommendation XXI on 'Commodities based on natural and synthetic rubber
- Recommendation XXI/1 on ‘Commodities based on natural and synthetic rubber in contact with food
- Recommendation XX1/2 on ‘Special consumer goods made of natural and synthetic rubber and of lattices made of synthetic and natural rubber
Textiles, Apparel and Footwear China China Notifies WTO on the Proposal to Revise GB 20400 National Standard for Safety Technical Specification for Leather and Fur Products
On August 27, the Standardization Administration of China has notified the World Trade Organization (WTO) on the draft standard to revise GB 20400 - Safety technical specification for leather and fur products.
This draft document specifies the terms and definitions, product classifications, requirements, test methods and judgement for the safety of leather and fur products. This document applies to all types of leather and fur products as well as leather and fur parts of leather and fur products.
It is due to be released/published on 24 December 2024.Textiles, Apparel and Footwear China China Notifies WTO on the Proposal to Revise GB 18587 (National Standard on Indoor decorating and refurbishing materials)
On August 27, the Standardization Administration of China has notified the World Trade Organization (WTO) on the draft standard to revise GB 18587 — National Standard on Indoor decorating and refurbishing materials —Limit of harmful substances of carpets, carpet underlays, adhesives and polyvinyl chloride flooring.
GB 18587 specifies the emission limits and test methods for hazardous substances from carpets, carpet underlays and adhesives, and specifies limits and test methods for hazardous substances in polyvinyl chloride flooring.
This document applies to newly produced or unused carpets, carpet underlays and adhesives, and applies to the production, quality control, use, and sales of polyvinyl chloride flooring.Artificial Intelligence
Global
Global - ISO/IEC Publishes New Standards for Data quality in AI (ISO/IEC 5259 series)
On July 2, 2024, the International Electrotechnical Commission released standards for Data quality for analytics and machine learning (ML) in AI as follows:
1. ISO/IEC 5259-3:2024 - Artificial intelligence - Data quality for analytics and machine learning (ML) - Part 3: Data quality management requirements and guidelines
2. ISO/IEC 5259-1:2024 - Artificial intelligence - Data quality for analytics and machine learning (ML) - Part 1: Overview, terminology, and examples
Official sourceArtificial Intelligence
New Zealand
New Zealand MBIE Releases Cabinet Paper on Approach to Work on Artificial
Intelligence
On July 25, 2024, the Ministry of Business, Innovation & Employment (MBIE) of New Zealand released a cabinet paper on Approach to Work on Artificial Intelligence (ECO-24-MIN-0119).
Official sourceArtificial Intelligence
United Kingdom
United Kingdom DSIT Expands Its Scope in Data, Digital and AI
On July 8, 2024, the United Kingdom Department for Science, Innovation and Technology (DSIT) announced its expansion in scope and size.
Official sourceArtificial Intelligence
Nigeria
Nigeria NITDA NCAIR Publishes National Artificial Intelligence Strategy
On August 1, 2024, the National Information Technology Development Agency (NITDA) National Center for Artificial Intelligence and Robotics (NCAIR) published the draft National Artificial Intelligence Strategy.
No details regarding comment submission has been provided in the document.
Official sourceArtificial Intelligence
Singapore
Enterprise Singapore Opens Public Consultation on the Artificial Intelligence Management System Standard
On August 2, 2024, Enterprise Singapore opened a public consultation on the draft standard Information technology – Artificial intelligence – Management system (Identical adoption of ISO/IEC 42001:2023).
Comments are accepted until October 3, 2024 and can be submitted to http://enterprisesg.gov.sg/.
Official sourceArtificial Intelligence
United Arab Emirates
UAE AI Publishes Charter for the Development and Use of Artificial Intelligence
On July 30, 2024 the Minister of State for Artificial Intelligence, Digital Economy & Remote Work Applications Office (AI) published The UAE Charter for the Development & Use of Artificial Intelligence.
Official sourceArtificial Intelligence
Singapore
Singapore IMDA and AI Verify Foundation Publish Framework for Generative AI and Update on AI Governance Playbook for Small States
On May 30, 2024, the Infocomm Media Development Authority (IMDA) and AI Verify Foundation of Singapore published the Model AI Governance Framework for Generative AI and released an update on the Digital Forum for Small States (Digital FOSS) AI Governance Playbook.
Official sourceArtificial Intelligence
Libya
Libya CIM Publishes Artificial Intelligence Policy
On May 16, 2024, the Communications and Informatics Authority (CIM) of Libya published the Artificial Intelligence National Policy.
Official sourceArtificial Intelligence, Cyber Security
USA
USA NIST Releases Publications on Risk Management and Software Development Practices for Generative AI
On July 25, 2024, the National Institute of Standards and Technology (NIST) of the United States of America published the following publications:
- Artificial Intelligence Risk Management Framework: Generative Artificial Intelligence Profile (NIST AI 600-1)- Secure Software Development Practices for Generative AI and Dual-Use Foundation Models (NIST SP 800-218A)
Official sourceArtificial Intelligence, Cyber Security
Singapore
Singapore CSA Opens Public Consultation on Guide on Securing AI Systems
On July 29, 2024, the Cyber Security Agency of Singapore (CSA) opened a public consultation on the following draft documents:
- Draft Guidelines on Securing AI Systems
- Draft Companion Guide on Securing AI Systems
Comments were accepted until September 15, 2024.Chemicals
New Zealand
New Zealand EPA Proposes to Restrict Three New POPs Recently Added to the Stockholm Convention
On July 25, 2024, the Environmental Protection Authority (EPA) of New Zealand calls for submissions on plans to restrict the following three persistent organic pollutants (POPs) – and products containing them – by either banning or limiting their use:
- Dechlorane Plus;
- Methoxychlor; and
- UV-328.
Comments and feedback from industry and individuals were accepted until September 4, 2024.
Official sourceChemicals
China
China MEE Solicits Comments for Control Requirements for Eight Mercury-Added Products and Dental Amalgam
On July 3, 2024, the Ministry of Ecology and Environment (MEE) of the People’s Republic of China published a comment solicitation on the Announcement on the Control Requirements for Eight Types of Mercury-Added Products and Dental Amalgam including Mercury Vacuum Pumps.
The deadline for comments was on July 15, 2024.
Official sourceChemicals
EU
European Union EC Publishes Draft Amendment to Persistent Organic Pollutants (POPs) Regulation to Add UV-328
On July 30, 2024, the European Commission (EC) published the Draft Commission Delegated Regulation amending Annex I to the Regulation (EU) 2019/1021 on persistent organic pollutants to include UV-328 as a substance subject to certain restrictions.
The feedback period was until August 27, 2024.
Official sourceChemicals
Japan
Japan METI Announces the Addition of PFOA and Its Related Compounds to Class I Specified Chemical Substances Under the Order of Enforcement of the Chemical Substances Control Law
On July 5, 2024, the Japan Ministry of Economy, Trade and Industry (METI) together with the Ministry of Health, Labor and Welfare and the Ministry of the Environment published the cabinet decision, designating PFOA isomers or their salts and PFOA related compounds as Class I Specified Chemical Substances and making necessary revisions to the Order for Enforcement of the Act on the
Evaluation of Chemical Substances and Regulation of Their Manufacture, etc.
Official sourceChemicals
Japan
Japan METI Solicits Comments on Proposed Measures for PFHxS-Related Substances Under the Act on the Evaluation of Chemical Substances and Regulation of Their Manufacture, etc
On August 1, 2024, the Japan Ministry of Economy, Trade and Industry (METI) together with the Ministry of Health, Labor and Welfare and the Ministry of the Environment published a solicitation on the proposed measures for import prohibition of perfluorohexane sulfonic acid (PFHxS) - related substances under the Act on the Evaluation of Chemical Substances and Regulation of Their
Manufacture, etc.
The feedback period was until September 5, 2024.
Official sourceChemicals
USA
USA EPA Publishes Proposed Rule on 1-Bromopropane (1-BP); Regulation under the Toxic Substances Control Act (TSCA)
On August 8, 2024, the Environmental Protection Agency (EPA) published Proposed Rule: 1-Bromopropane (1-BP); Regulation under the Toxic Substances Control Act (TSCA) proposing requirements to prevent consumer access to the chemical, restrict the industrial and commercial use of the chemical and protect workers.
The comment period of this proposed rule will end on September 23, 2024.
Official sourceChemicals
USA; Maine
USA - Maine DEP Publishes Concept Draft Language on Products Containing Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS)
On August 7, 2024, the Department of Environmental Protection (DEP) of Maine published the new Concept Draft Language Chapter 90 Products Containing Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) through World Trade Organization (WTO) website with proposed requirements for manufacturers whose products contain PFAS.
The final date for comments was August 30, 2024.
Official sourceChemicals
Australia
Australia DCCEEW Updates IChEMS Online Register Adding Dechlorane Plus and UV-328 Substances
On June 28, 2024, the Australia Department of Climate Change, Energy, the Environment and Water (DCCEEW) updated the Industrial Chemicals Environmental Management (Register) Instrument 2022 adding five substances to its online registry. The five substances are:- Melamine,
- Boric acid and its precursors,
- β-Alanine,
- Dechlorane Plus,
- and UV-328.
Risk management measures for Dechlorane Plus and UV-328 (whether on its own, in mixtures, or in articles) will take effect on July 1, 2026, while measures on the remaining substances will come into effect on January 1, 2025.
Official sourceChemicals
China
China MofCom Announces Export Control Implementation on Antimony and Superhard
Materials Related Items
On August 15, 2024, the Ministry of Commerce (MofCom) and General Administration of Customs of the People’s Republic of China (GACC) published Announcement No. 33 of 2024, which implements export control on Antimony and superhard material related items. The notice also addressed export licensing procedures.
The announcement came into effect on September 15, 2024.
Please contact your local UL Solutions office for more information.Chemicals
Singapore
Singapore NEA Invites Public Comments on Proposed Control of 6 Mercury-added Products as Hazardous Substances
On August 19, 2024, the National Environment Agency (NEA) released a public consultation on the proposed control of six (6) mercury-added products as hazardous substances under the Second Schedule of the Environmental Protection and Management Act (EPMA).
The consultation will last 4 weeks until September 19, 2024.
Official sourceChemicals, REACH
Ukraine
Ukraine MEPR Adopts Resolution on the Approval of the Technical Regulation on the Safety of Chemical Products
On July 23, 2024 the Ministry of Environmental Protection and Natural Resources (MEPR) adopted Resolution on the approval of the Technical Regulation on the safety of chemical products implementing the norms of the European REACH Regulation.
Official sourceChemicals, Sanitation
Belgium
Belgium House of Representatives Publishes Draft Law Prohibiting Products Containing Per- and Polyfluoroalkyl Substances
On August 1, 2024, the Belgium House of Representatives published a draft law prohibiting the placing on the market and the export of various products containing per- and polyfluoroalkyl substances. This bill aims to prohibit the placing on the market of certain consumer products (food utensils, cosmetics, textiles, and fire-fighting foams) containing PFAS.
If finalized, the law is expected to come into force on July 1, 2025.
Official sourceChemicals, Sustainability, Chemicals Management - Restricted Substances
China
China CPCIF Publishes Draft Standard to Establish Concentration Limits for Restricted Substances in Recycled Plastics
On June 28, 2024, China Petroleum and Chemical Industry Federation (CPCIF) published a draft national standard for the limit requirements of restricted substances in recycled plastics on the National Public Service Platform for Standards Information for public consultation. This document specifies the types, limits, and determination methods of restricted substances in recycled
plastics.
Official sourceCyber Security
USA
USA FCC Publishes Final Rule on Cybersecurity Labeling for Internet of Things
On July 30, 2024, the Federal Communications Commission (FCC) of the United States of America published the Final Rule for Cybersecurity Labeling for Internet of Things (PSHSB: PS Docket No. 23–239; FR ID 210726) through the Federal Register.
Official sourceCyber Security
Morocco
Morocco DGSSI Publishes National Cybersecurity Strategy
On July 22, 2024, the General Directorate of Information Systems Security (DGSSI) of Morocco published The National Cybersecurity Strategy 2030.
Official sourceCyber Security
Vietnam
Vietnam MIC Opens Public Consultation on the Technical Standard on Cybersecurity Requirements for Surveillance Camera
On August 23, 2024, the Vietnam Ministry of Information and Communications (MIC) opened a public consultation on the draft National Technical Regulations Basic Information Security Requirements for Surveillance Cameras Using Internet Protocol (QCVN 135:2024/BTTTT).
Comments are accepted until October 23, 2024 and must be submitted to this link.
Official sourceCyber Security, Artificial Intelligence
United Kingdom
United Kingdom DSIT Announces Call for Views Regarding Cyber Security of AI
On August 2, 2024, the United Kingdom Department for Science, Innovation and Technology (DSIT) announced a call for views for cyber security of AI.
The call for views ended on August 9, 2024.
Official sourceCyber Security, Wireless
Malaysia
Malaysia MCMC Opens Public Consultation on Technical Code for Deployment Specifications of Segment Routing Over IPv6
On August 1, 2024, the Malaysian Communications and Multimedia Commission (MCMC) opened a public consultation on Technical Code - Internet Protocol Version 6 - Deployment Specifications for Segment Routing Over Internet Protocol Version 6 (MCMC MTSFB TC GXXX:2024).
Comments were accepted until August 31, 2024.
Official sourceElectrical and Electronic Waste
Indonesia
Indonesia Ministry of Environment and Forestry Publishes Regulation on Waste Management Containing Hazardous and Toxic Materials
On July 4, 2024, Indonesia Ministry of Environment and Forestry published Regulation No. 9/2024 concerning management of waste containing hazardous and toxic waste and materials. This Regulation mandates individuals and enterprises that generate particular hazardous waste to sort and follow the 3R procedures (Reduce, Recycle, and Reuse).
Official sourceElectrical and Electronic Waste
Taiwan
Taiwan Ministry of Environment Publishes Draft Regulations Governing Labelling for Recycling Categories and Other Matters of Compliance for Mobile Phone Manufacturers and Importers
On August 6, 2024, the Ministry of Environment of Taiwan published draft Regulations Governing Labelling for Recycling Categories and Other Matters of Compliance for Mobile Phone Manufacturers and Importers.
The deadline for public comments was September 5, 2024.
Official sourceElectrical and Electronic Waste, Sustainability
Global
International - IEC Publishes New Standard IEC 63338:2024 - General Guidance on Reuse and Repurposing of Secondary Cells and Batteries
On August 6, 2024, International Electrotechnical Commission (IEC) released IEC 63338:2024. This standard deals with the general guidance on reuse and repurposing of
secondary cells and batteries.
Official sourceEMC
EU
European Union - CENELEC Publishes New Standard EN 50065-2-3:2024 - Immunity
Requirements for Mains Communicating Equipment Operating Range of Frequencies 3kHz to 95kHz
On July 26, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN 50065-2-3:2024 - Signaling on Low-voltage Electrical Installations in the Frequency Range 3 kHz to 148.5 kHz - Part 2-3: Immunity Requirements for Mains Communicating Equipment Operating in the Range of Frequencies 3 kHz to 95 kHz and Intended for Use by Electricity Suppliers and Distributors.
Date of withdrawal of superseded version is on June 3, 2027.
Official sourceEMC
Global
International - IEC Publishes New Standard IEC 61000-2-4:2024 – Electromagnetic Compatibility Levels in Power Distribution Systems
On July 25, 2024, International Electrotechnical Commission (IEC) released IEC 61000-2-4:2024. This standard deals with compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances.
Official sourceEMC
Taiwan
Taiwan BSMI Publishes Updated List of Recognized EMC Testing Laboratories in Foreign Countries (August 21, 2024 Update)
On August 21, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) published the List of EMC Testing Laboratories Recognized by the BSMI in Foreign Countries to update the list of the latest version.
Official sourceEMC, Energy Efficiency, Safety
Israel
Israel MEI Publishes Guidelines and Instructions of Imported Shipments According to the Import and Export Ordinance New Version 1979
On July 1, 2024, Ministry of Economy and Industry (MEI) published guidelines and instructions of the commissioner for standardization regarding the control of imported shipments according to the import and export ordinance (new version), 1979.
Effective date is on July 1, 2024.
Official sourceEMC, Energy Efficiency, Safety
Israel
Israel MEI Publishes Amendments on Standards Law and the Import and Export Ordinance
On August 11, 2024, the Ministry of Economy and Industry (MEI) published Israel's book of laws no. 3286 regarding amendment no. 19 of Standards Law and amendment no. 7 of Import and Export Ordinance which aims to adopt the European Regulations.
These amendments are effective on January 1, 2025.
Official sourceEMC, Performance
Saudi Arabia
Saudi Arabia SASO Publishes Issue 5040 Regarding List of Adopted Voluntary Standard Specifications for Electrical and Electronic Sector
On July 26, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) published issue 5040 regarding list of adopted International Electrotechnical Commission (IEC) standard specifications for electrical and electronic sector.EMC, RoHS, Performance
China
China SAC/SAMR Issues 109 Recommended National Standards and 4 National Standard
Revisions Including a Part of Electrical and Electronic Equipment
On June 29, 2024, the National Standardization Administration (SAC) of the State Administration for Market Regulation (SAMR) published the Announcement No. 14 of 2024 to approve 109 Recommended National Standards and 4 National Standard Revisions, including the electromagnetic compatibility standards for mobile terminals that support BeiDou and performance and test requirements for Uninterruptible Power Systems (UPS) and electric dishwashers, etc.
Official sourceEMC, RoHS, Safety, Performance
Taiwan
Taiwan BSMI Issues a Public Consultation to Include Stationary Lithium Battery Storage Appliances into the BSMI Mandatory Product Certification Scope
On July 30, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) of the Ministry of Economic Affairs (MOEA) published a public consultation for the plan of adding stationary lithium battery storage appliances to the mandatory inspection scope of BSMI certification. The draft Legal Inspection Requirements for Stationary Lithium Battery Storage Appliances is for public comments until September 30, 2024.
Responsible Agency:
(1) Inspection Administrative Group of the Bureau of Standards, Metrology and
Inspection of the Ministry of Economic Affairs.
(2) Address: No. 4, Section 1, Jinan Road, Zhongzheng District, Taipei City 100,
Taiwan
(3) Telephone: 02-23431783, contact person: Han Zhouhua
(4) Fax: 02-33433991
(5) Email: mailto:ha.han@bsmi.gov.tw
Official sourceEMC, Safety
Morocco
Morocco MoIT Updates List of Products Subject to the Verification of Conformity Scheme
On August 3, 2024, Ministry of Industry and Trade (MoIT) updated the list of products under the national verification of conformity scheme and controlled at origin and destination.
Official sourceEMC, Safety
Israel
Israel MEI Updates Guidelines and Instructions for Import of Goods to Which an Official Standard Applies
On August 5, 2024, the Ministry of Economy and Industry (MEI) published updated guidelines and instructions of the commissioner for standardization regarding the import of goods to which an official standard applies effective as of July 1, 2024.
Official sourceEMC, Safety
Global, CB Scheme
IECEE - New Test Report Forms (TRFs) Added to IECEE on Week 33 (2024-W33)
On August 16, 2024, new TRFs have been published and added to the IECEE website.
Official sourceEMC, Wireless
Canada
Canada ISED Publishes Guidance on Scope and Application of Digital Scanner and Analogue Scanner Receivers
On August 8, 2024, the Department of Innovation, Science and Economic Development Canada (ISED), published Notice 2024-DRS0010, Guidance on the scope and application of RSS-135 – Digital Scanner Receivers (Issue 2), and RSS-215 – Analogue Scanner Receivers (Issue 2).
Official sourceEnergy Efficiency
India
India MoP Releases Amendment Notification for Ultra High Definition and Colour Television
On July 15, 2024, the Ministry of Power (MoP) released amendment notifications no. S.O. 2785(E) for Ultra High Definition Television (UHD TV 4K TV) and S.O. 2784(E) for Colour Television (CTV).
Please contact your local UL Solutions office for more information.Energy Efficiency
India
India MoP Releases Amendment Notification for Room Air Conditioners
On July 16, 2024, the Ministry of Power (MoP) released amendment notification no. S.O. 2794(E) for room air conditioners.
Please contact your local UL Solutions office for more information.Energy Efficiency
USA
USA EPA Releases Public Notice on Proposed Sunset of Energy Star Specification for Audio/Video (AV) Systems
On July 23, 2024, U.S. Environmental Protection Agency (EPA) published a public notice regarding the proposed sunset of the energy star specification for Audio/Video (AV) systems.
Comments were accepted until August 20, 2024.
Official sourceEnergy Efficiency
Thailand
Thailand MIND Announces New Industrial Product Standard for Energy Efficiency Requirements of Screw Air Compressors
On July 23, 2024, Thailand's Ministry of Industry (MIND) issued an announcement for setting the industrial product standards for energy efficiency requirements of screw air compressors - TIS 3746-2566 (2023). This standard is effective July 24, 2024.
Official sourceEnergy Efficiency
USA
USA EPA Releases Public Notice for the Final Test Method to Determine Room Air Conditioner Heating Mode Performance
On July 24, 2024, U.S. Environmental Protection Agency (EPA)and U.S. Department of Energy released the final Energy Star test method to determine room air conditioner heating mode performance.
Official sourceEnergy Efficiency
EU
European Union - CENELEC Publishes Amended Standard EN 62552-3:2020/A11:2024 -Household Refrigerating Appliances - Energy Consumption and Volume
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 62552-3:2020/A11:2024 - Household Refrigerating Appliances - Characteristics and Test Methods - Part 3: Energy Consumption and Volume.Energy Efficiency
USA
USA EPA Releases Public Notice for the Discussion Guide and Draft Energy Star Central Heat Pump Water Heater Systems Test Method
On July 31, 2024, U.S. Environmental Protection Agency (EPA) released a discussion guide and draft Energy Star test method for central heat pump water heater systems.
Comment submission was until September 14, 2024.
Official sourceEnergy Efficiency
Israel
Israel MoE Releases Draft Energy Source Law Regarding Provision for Exemption of Chapter III
On August 5, 2024, the Ministry of Energy (MoE) released a draft temporary order regulation that establishes authority for the Commissioner to exempt certain electrical appliances from the provisions of chapter III of the Energy Sources Law.
Closing date for comments was on August 11, 2024.Energy Efficiency
Costa Rica
Costa Rica - MINAE Publishes Draft Complementary Regulation for the Energy Efficiency of Fixed Split-type, Free Discharge, Ductless Air Conditioners
On August 1, 2024, the Ministry of Environment and Energy published to the public and institution the draft complimentary regulation for the application of RTCA 23.01.80:2022. This technical regulation deals with the energy efficiency specifications of electrical products particular for split-type, free discharge, ductless air conditioners.
Comment period end date was on August 11, 2024.
Official sourceEnergy Efficiency
Costa Rica
Costa Rica - INTECO Publishes Draft Energy Efficiency Standards for Various Electrical Products
On August 5, 2024, Institute of Technical Standards of Costa Rica (INTECO) published the following draft standards for public consultation.- PN INTE E17-3:2024
- PN INTE E83-1:2024
- PN INTE E84-1:2024
- PN INTE E17-1:2024
- PN INTE E17-2:2024
- PN INTE E17-4:2017/ENM 1:2024
- PN INTE E17-5:2017/ENM 1:2024
- PN INTE E83-2:2024
Comments were accepted until August 9, 2024.
Official sourceEnergy Efficiency
Uruguay
Uruguay UNIT Publishes Draft Standard PU UNIT 1159 - Energy Efficiency Specifications and Labeling for Incandescent Lamps
On August 7, 2024, the Uruguayan Institute of Technical Standards (UNIT) published a draft standard PU UNIT 1159 which deals with the energy efficiency specifications and labeling for incandescent lamps.
Feedbacks and comments were accepted until September 7, 2024.
Official sourceEnergy Efficiency
USA
USA - DOE Publishes Direct Final Rule & Confirmation of Compliance Dates for the Energy Conservation Standards for Consumer Conventional Cooking Products
On August 12, 2024, the US Department of Energy published direct final rule for the energy conservation standards for consumer conventional cooking products.
The effective date of June 13, 2024, for the direct final rule published on February 14, 2024 (89 FR 11434) is confirmed. Compliance with the standards established in the direct final rule will be required on January 31, 2028.
Official sourceEnergy Efficiency
USA
USA EPA Releases Public Notice for the Energy Star Program Requirements Product Specification for Commercial Electric Cooktops (May 2024 Rev)
U.S. Environmental Protection Agency (EPA) published Version 1.0 (Rev. May 2024) Energy Star program requirements product specification for commercial electric cooktops.
Official sourceEnergy Efficiency
India
India MoP Releases Amendment Notification for Ceiling Fans
On August 14, 2024, the Ministry of Power (MoP) released amendment notification no. S.O. 3471(E) in order to update star levels of ceiling fans.
Please contact your local UL Solutions office for more information.Energy Efficiency
Israel
Israel MEI Publishes Draft Amendment on Free Import Order
On August 19, 2024, the Ministry of Economy and Industry (MEI) published draft amendment to the Free Import Order regarding energy source requirements.
Closing date for comments was on August 26, 2024.
Official sourceEnergy Efficiency
Israel
Israel MoE Releases Amendment on Energy Sources Law
On August 17, 2024, the Ministry of Energy (MoE) released temporary exemption in obtaining sustainable energy permit for the import of products listed in the second appendix of the Free Import Order.This exemption is effective on August 18, 2024 to October 17, 2024 or until the order is amended.
Official linkEnergy Efficiency
Australia
Australia DCCEEW Prepares Draft Greenhouse and Energy Minimum Standards (GEMS)
Determination for Commercial Ice-makers
On August 20, 2024, Department of Climate Change, Energy, the Environment and Water (DCCEEW) prepared draft Greenhouse and Energy Minimum Standards (GEMS) determination for commercial ice-makers.
Deadline for comments was on September 16, 2024.
Official linkEnergy Efficiency
Turkey
Turkey MoIT Issues a Draft Communiqué on New Energy Labelling of Household Tumble Dryers
On August 12, 2024, Turkey's Ministry of Industry and Technology (MoIT) issued a draft Communiqué on Energy Labelling of Household Tumble Dryers (2023/2534/AB) (SGM-2024/..). The aim is to determine the labeling requirements and provide additional product information for placing the household tumble dryers in the markets and putting them into service and to implement the Energy Labeling Framework Regulation.
The final date for comments will be on October 11, 2024.
Official sourceEnergy Efficiency
Turkey
Turkey MoIT Issues a Draft Communiqué on Ecodesign Requirements for Household Tumble Dryers
On August 12, 2024, the Ministry of Industry and Technology (MoIT) of Turkey issued a draft Communiqué on Ecodesign Requirements for Household Tumble Dryers (2023/2533/AB) (SGM-2024/..). It is to determine the Ecodesign requirements for placing the household tumble dryers in the markets and putting them into service to implement the Regulation on Ecodesign of Energy Related Products.
The final date for comments will be on October 11, 2024.
Official sourceEnergy Efficiency
Turkey
Turkey MoIT Issues a Draft Communiqué on Ecodesign Requirements of Electrical and Electronic Household and Office Equipment
On August 15, 2024, the Ministry of Industry and Technology (MoIT) of Turkey issued a draft Communiqué on Ecodesign Requirements for Off Mode, Standby Mode, and Networked Standby Energy Consumption of Electrical and Electronic Household and Office Equipment (2023/826/AB) (SGM-2024/...) to determine the requirements for placing on markets and putting these products into service, in order to implement the Regulation on Ecodesign of Energy Related Products.
The final date for comments will be on October 14, 2024.
Official sourceEnergy Efficiency
Turkey
Turkey MoIT Issues a Corrigendum to Communiqué on Energy Labeling of Light Sources (2019/2015/EU)(SGM:2021/12)
On August 19, 2024, Turkey's Ministry of Industry and Technology (MoIT) notified about the Communiqué amending the Communiqué on Energy Labeling of Light Sources (2019/2015/EU)(SGM:2021/12) published on August 21, 2021 and numbered 31560 in the official gazette.
Official sourceEnergy Efficiency
Turkey
Turkey MoIT Issues a Corrigendum to Communiqué on Energy Labeling of Cooling Devices (2019/2016/EU) (SGM:2021/8)
On August 19, 2024, Turkey's Ministry of Industry and Technology (MoIT) notified about the Communiqué amending the Communiqué on Energy Labeling of Cooling Devices (2019/2016/EU) (SGM: 2021/8) published in the Official Gazette dated 25/3/2021 and numbered 31434.
Official sourceEnergy Efficiency, Performance
Morocco
Morocco MoIT Releases Draft Decree for Mandatory Minimum Energy Performance of Electric Motors
On July 27, 2024, the Ministry of Industry and Trade (MoIT) released draft decree for mandatory minimum energy performance of electric motors.
The draft was open for comments until August 15, 2024.
Official sourceEnergy Efficiency, Performance
Morocco
Morocco MoIT Releases Draft Decree for Minimum Energy Performance and Mandatory Energy Labeling of Air Conditioners
On July 27, 2024, the Ministry of Industry and Trade (MoIT) released draft decree for minimum energy performance and mandatory energy labeling of air conditioners.
The draft was open for comments until August 15, 2024
Official sourceEnergy Efficiency, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 62552-1:2020/A11:2024 - Household Refrigerating Appliances - General Requirements
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 62552-1:2020/A11:2024 - Household Refrigerating Appliances - Characteristics and Test Methods - Part 1: General Requirements.
Official sourceEnergy Efficiency, Performance
Morocco
Morocco MoIT Releases Draft Decree for Mandatory Minimum Energy Performance and Energy Labeling of Refrigerators
On June 11, 2024, the Ministry of Industry and Trade (MoIT) released draft decree for the mandatory minimum energy performance and energy labeling of refrigerators.
Comments and feedbacks were accepted until August 16, 2024.
Official sourceEnergy Efficiency, Performance
EU
European Union - CENELEC Amends Standard EN IEC 63252:2020/A11:2024 - Energy Consumption of Vending Machines
On August 23, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 63252:2020/A11:2024 - Energy Consumption of Vending Machines.Energy Efficiency, Safety
Malaysia
Malaysia ST Publishes the Updated Guidelines for the Approval of Electrical Equipment (2024 Edition)
On July 26, 2024, the Energy Commission, or Suruhanjaya Tenaga (ST), published the seventh edition of the Guidelines for the Approval of Electrical Equipment (2024 Edition). It guides all manufacturers, importers, exhibitors, sellers, and advertisers of regulated electrical equipment, as well as registered laboratories and certification bodies, to ensure compliance with the Electricity Supply Act 1990 [Act 447] and Regulations.
Official sourceEnergy Efficiency, Safety
Brazil
Brazil INMETRO Proposes to Amend the Conformity Assessment Requirements for Refrigerators and Similar Products (Public Consultation No. 13 of August 8, 2024)
On August 12, 2024, the National Institute of Metrology, Quality and Technology (INMETRO) issued Public Consultation No. 13, the proposal to amend Inmetro Portaria No. 332 of August 2, 2021, which approves the consolidated Conformity Assessment Requirements for Refrigerators and Similar Products. The public consultation period is until October 11, 2024.
You can submit feedback and suggestions through the Participa+Brasil Platform.
Official sourceExplosive Atmospheres
South Africa
South Africa SABS Publishes Draft Standard for Cable glands Used on Flameproof Enclosures (Ex d)
On June 18, 2024, the South African Bureau of Standards (SABS) published the draft standard SANS 808:2024 Edition 2 or the Cable Glands for Use on Group 1 Flameproof Equipment (Ex d).
Comments are accepted until September 19, 2024. Any comment on the draft should be sent to mailto:dsscomments@sabs.co.za.Explosive Atmospheres, Safety, Chemicals
China
China SAC/SAMR Issues 12 Mandatory National Standards (GB) and 1 National Standard Amendment Including Safety Standards for Plugs and Socket-Outlets and E-Mobility
On July 24, 2024, the National Standardization Administration (SAC) of the State Administration for Market Regulation (SAMR) published the Announcement No. 16 of 2024 to approve 12 mandatory national standards as well as one mandatory national standard amendment including some electrical components and E-mobility related products.
Official sourcePerformance
Global
International - IEC Publishes New Standard IEC 61960-4 - Coin Secondary Lithium Cells and Batteries
On July 30, 2024, International Electrotechnical Commission (IEC) released IEC 61960-4:2024. This standard deals with secondary lithium cells and batteries for portable applications particular for coin secondary lithium cells and batteries.
Official sourcePerformance
Global
International - IEC Publishes New Standard IEC 62788-7-3:2022/AMD1:2024 - Measurement Procedures for Materials Used in Photovoltaic Module
On July 31, 2024, International Electrotechnical Commission (IEC) released IEC 62788-7-3:2022/AMD1:2024. This standard specifies measurement procedures for materials used in photovoltaic modules, specifically focusing on accelerated stress tests for methods of abrasion of PV module external surfaces.
Official sourcePerformance
EU
European Union - CENELEC Publishes Amended Standard EN 62552-2:2020/A11:2024 -
Household Refrigerating Appliances - Performance Requirements
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 62552-2:2020/A11:2024 - Household Refrigerating Appliances - Characteristics and Test Methods - Part 2: Performance Requirements.Performance
EU
European Union - CENELEC Publishes New Standard EN IEC 61300-2-22:2024 – Fiber Optic Interconnecting Devices and Passive Components - Change of Temperature
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 61300-2-22:2024 - Fiber Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-22: Tests - Change of Temperature.
Date of withdrawal of superseded version is on July 25, 2025.
Official sourcePerformance
EU
European Union - CENELEC Publishes New Standard EN IEC 61169-69:2024 - Radio-frequency Coaxial Connectors - 50 Ω (type SMP3)
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 61169-69:2024 - Radio-Frequency Connectors - Part 69: Sectional Specification for RF Coaxial Connectors With Push on Mating - Characteristic Impedance 50 ω (Type SMP3).
Official sourcePerformance
EU
European Union - CENELEC Publishes New Standard EN IEC 60704-2-9:2024 - Airborne
Acoustical Noise - Electric Hair Care Appliances
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 60704-2-9:2024 - Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2-9: Particular Requirements for Electric Hair Care Appliances.
Date of withdrawal of superseded version is on July 15, 2027.
Official sourcePerformance
EU
European Union - CENELEC Publishes New Standard EN IEC 60384-22:2024 – Fixed Surface Mount Multilayer Capacitors of Ceramic Dielectric, Class 2
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 60384-22:2024 - Fixed Capacitors for Use in Electronic Equipment - Part 22: Sectional Specification - Fixed Surface Mount Multilayer Capacitors of Ceramic Dielectric, Class 2.
Date of withdrawal of superseded version is on July 26, 2027.
Official sourcePerformance
EU
European Union - CENELEC Publishes New Standard EN IEC 60384-21:2024 – Fixed Surface Mount Multilayer Capacitors of Ceramic Dielectric, Class 1
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 60384-21:2024 - Fixed Capacitors for Use in Electronic Equipment - Part 21: Sectional Specification - Fixed Surface Mount Multilayer Capacitors of Ceramic Dielectric, Class 1.
Date of withdrawal of superseded version is on July 26, 2027.
Official sourcePerformance
Global
International - IEC Publishes New Standard IEC 60512-28-100 - Tests and Measurements for Connectors for Electrical and Electronic Equipment
On August 2, 2024, International Electrotechnical Commission (IEC) released IEC 60512-28-100:2024. This standard specifies the test and measurement particular for the signal integrity tests up to 2 000 MHz - Tests 28a to 28g for connectors for electrical and electronic equipment.
Official sourcePerformance
Uruguay
Uruguay UNIT Publishes Draft Standard PU UNIT-IEC 62660-2:2018 - Reliability and Abuse Testing for Secondary Lithium-Ion Cells for the Propulsion of Electric Road Vehicles
On August 5, 2024, the Uruguayan Institute of Technical Standards (UNIT) published a draft standard PU UNIT-IEC 62660-2:2018. This standard deals with reliability and abuse testing for secondary lithium-ion cells for the propulsion of electric road vehicles.
Feedback and comments were accepted until September 5, 2024.
Official sourcePerformance
Uruguay
Uruguay UNIT Publishes Draft Standard PU UNIT-IEC 62660-1:2018 – Performance Testing for Secondary Lithium-Ion Cells for the Propulsion of Electric Road Vehicles
On August 5, 2024, the Uruguayan Institute of Technical Standards (UNIT) published a draft standard PU UNIT-IEC 62660-1:2018. This standard deals with performance testing for secondary lithium-ion cells for the propulsion of electric road vehicles.
Feedback and comments were accepted until September 5, 2024.
Official sourcePerformance
Uruguay
Uruguay UNIT Publishes Draft Standard PU UNIT-IEC 60379:2023 - Methods for Measuring the Performance of Electric Storage Water Heaters for Household Purposes
On August 6, 2024, the Uruguayan Institute of Technical Standards (UNIT) published a draft standard PU UNIT-IEC 60379:2023. This standard deals with the methods for measuring the performance of electric storage water heaters for household purposes.
Feedback and comments were accepted until September 6, 2024.Performance
Global
International - IEC Publishes New Standard IEC 63241-2-3:2024 - Dust Measurement Procedure for Hand-Held Concrete Grinders and Disc-Type Sanders
On August 8, 2024, International Electrotechnical Commission (IEC) released IEC 63241-2-3:2024. This standard deals with electric motor-operated tools particular for the dust measurement procedure for hand-held concrete grinders and disc-type sanders.
Official sourcePerformance
EU
European Union - CENELEC Publishes New Standard EN IEC 62053-41:2024 – Static Meters for DC Energy (Classes 0.5 And 1)
On August 9, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 62053-41:2024 - Electricity Metering Equipment - Particular Requirements - Part 41: Static Meters for DC Energy (Classes 0.5 and 1).Performance
EU
European Union - CENELEC Publishes New Standard EN IEC 60793-1-22:2024 – Optical Fibers Length Measurement
On August 16, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 60793-1-22:2024 - Optical Fibers - Part 1-22: Measurement Methods and Test Procedures - Length Measurement.
Date of withdrawal of superseded version is on August 1, 2027.
Official sourcePerformance
Global
International - IEC Publishes New Standard IEC 63241-2-4:2024 - Dust Measurement Procedure for Hand-Held Sanders
On August 15, 2024, International Electrotechnical Commission (IEC) released IEC 63241-2-4:2024. This standard deals with dust measurement procedures for electric motor-operated tools, specifically addressing hand-held sanders.
Official sourcePerformance
EU
European Union - CENELEC Publishes New Standard EN IEC 60793-1-46:2024 – Optical Fibers Monitoring of Changes in Attenuation
On August 16, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 60793-1-46:2024 - Optical Fibers - Part 1-46: Measurement Methods and Test Procedures - Monitoring of Changes in Attenuation.
Date of withdrawal of superseded version is on August 1, 2027.
Official sourcePerformance
Brazil
Brazil ABNT Publishes New Standard ABNT NBR 17168:2024 - Measuring Ventilation Systems - Field Performance
On August 13, 2024, the Brazilian Association of Technical Standards (ABNT) published new standard ABNT NBR 17168:2024 for measuring ventilation systems - field performance.
Official sourcePerformance
Global
International - IEC Publishes New Standard IEC 62271-100:2021/AMD1:2024 - Requirements for Alternating-Current Circuit-Breakers
On August 19, 2024, International Electrotechnical Commission (IEC) released IEC 62271-100:2021/AMD1:2024. This standard deal specifies requirements for alternating-current circuit-breakers.
Official sourcePerformance
EU
European Union - CENELEC Publishes New Standard EN IEC 60228:2024 – Conductors of Insulated Cables
On August 23, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 60228:2024 - Conductors of Insulated Cables.
Date of withdrawal of superseded version is on June 12, 2027.
Official sourcePerformance, Safety
Global, CB Scheme
IECEE Includes New Standards in the System for the Month of July 2024
On July 2024, new standards have been included in the IECEE System.
Official sourceREACH, Chemicals
South Korea
South Korea MOE Publishes Draft Partial Amendment of the Enforcement Regulations of the Act on Registration and Evaluation of Chemical Substances
On July 29, 2024, the Ministry of Environment (MOE) published Draft Partial Amendment of the Enforcement Regulations of the Act on Registration and Evaluation of Chemical Substances. The amendment is regarding the procedures of exempted registration documents and recycled chemicals.
The deadline for public consultation was September 13, 2024.
Official sourceREACH, Chemicals
Brazil
Brazil Senate Environmental Commission Analyzes the National Chemical Legislation Bill
On August 14, 2024, Brazil Senate's Environmental Commission (CMA) approved Bill No. 6120 of 2019 and rejected Amendment No. 1 - CCT to PL 6120/2019. The report was received and included in the meeting of the Environment Committee scheduled for August 21, 2024, where the regulatory project was postponed.RoHS, Chemicals
EU
European Commission EC Issues a New and Updated Version of the Exemption List Validity and Rolling Plan for the RoHS Directive
On August 7, 2024, the European Commission (EC) issued a new and updated version of the Rolling Plan status of the technical exemptions under the RoHS Directive. These exemptions are temporary and reassessed regularly.
Official sourceSafety
Nepal
Nepal NBSM Publishes Draft Standard for PVC Insulated Cable for Fixed Wiring with Copper Conductor
On July 22, 2024, Nepal Bureau of Standards and Metrology (NBSM) published draft standard for PVC insulated cable for fixed wiring with copper conductor.
Comments and feedback can be send to following details:
* Balaju, Kathmandu, Nepal
* Phone: +977 1 4350445/4350818
* Email: info@nbsm.gov.np
* Website: www.nbsm.gov.np
Official sourceSafety
Thailand
Thailand MIND Announces the New Industrial Product Standard for the Safety Requirements of Electric Toilets
On July 23, 2024, Thailand's Ministry of Industry (MIND) announced the setting of industrial product standard TIS 60335 Part 2(84)-2566 (2023) - Safety of Household and Similar Electrical Appliances - Part 2(84) – Particular Requirements for Electric Toilets.
This standard is effective on July 24, 2024.
Official sourceSafety
Indonesia
Indonesia BSN Prepares Draft Conformity Assessment Scheme for Household Appliances, Audio Video and Office Equipment
On July 29, 2024, National Standardization Agency of Indonesia (BSN) prepared draft conformity assessment scheme plan on electronic product sector for household appliances, audio video and office equipment.
Closing date for comments was on August 9, 2024.Safety
India
India BIS Releases Draft Revised Standard IS/IEC 61730-1:2016 for Photovoltaic (PV) Module Safety Qualification Part 1 Requirements for Construction
On July 26, 2024, Bureau of Indian Standards (BIS) released draft standard IS/IEC 61730-1:2016 Photovoltaic (PV) Module Safety Qualification Part 1 - Requirements for Construction (Second Revision) to align with the latest version of IEC 61730-1: 2023.
Comments and feedback were accepted until August 24, 2024.
Official sourceSafety
Thailand
Thailand MIND Announces the New Industrial Product Standard TIS 60335 Part 2(4)-2566 on Safety Requirements of Spin Extractors
On July 23, 2024, Thailand's Ministry of Industry (MIND) announced the setting of industrial product standard TIS 60335 Part 2(4)-2566 (2023) - Safety of Household and Similar Electrical Appliances - Part 2-4, Particular Requirements for Spin Extractors.
Official sourceSafety
Belgium
Belgium FPS Health Amends Royal Decree on Disposable (Single-use) Electronic Cigarettes
On July 16, 2024, the Federal Public Service Health, Food Chain Safety and Environment (FPS Health) of Belgium published Royal Decree amending the Royal Decree of 28 October 2016 on the manufacture and placing on the market of electronic cigarettes.
Date of entry into force is July 26, 2024.
Official sourceSafety
Tanzania
Tanzania TBS Publishes Updated List of Compulsory Standards
On July 27,2024, the Tanzania Bureau of Standards (TBS) published a list of new and revised compulsory standards as of June 2024.
Official sourceSafety
Chile
Chile - SEC Publishes New Draft Safety Protocol for Alternative Saws
On July 30, 2024, Superintendency of Electricity and Fuels (SEC) published draft protocol PC Nº 6/09:2024 which establishes the safety certification for alternative saws such as jig saws and saber saws.
The public consultation will start on July 30, 2024 until October 3, 2024.
The document under consultation and instructions for sending observations and/or comments can be found in the following link.
Official sourceSafety
Thailand
Thailand TISI Issues a Draft Ministerial Regulation Stipulating that Recessed Luminaires and Recessed Luminaires with Air Outlets for Use with LEDs Must Comply with TIS 902 Part 2(2) - 25xx
On July 19, 2024, Thai Industrial Standards Institute (TISI) issued a draft ministerial regulation stipulating that recessed luminaires and recessed luminaires with air outlets for use with LEDs must comply with TIS 902 Part 2(2) - 25xx: Recessed Luminaires and Recessed Air-handling Luminaires.
Comments on this draft ministerial regulation were accepted until September 16, 2024.
Official sourceSafety
Chile
Chile - SEC Publishes New Draft Safety Protocol for Coffee and Bean Grinders
On July 30, 2024, Superintendency of Electricity and Fuels (SEC) published draft protocol PE Nº 1/42:2024 which establishes the safety certification for coffee, grain and bean grinders.
The public consultation will start on July 30, 2024, until October 3, 2024.
The document under consultation and instructions for sending observations and/or comments can be found in the following link.
Official sourceSafety
Thailand
Thailand TISI Issues a Draft Ministerial Regulation Stipulating that Fixed General Purpose Luminaires Must Comply with TIS 902 Part 2(1)-2563 (2020)
On July 19, 2024, Thai Industrial Standards Institute (TISI) issued a draft ministerial regulation stipulating that stationary electric luminaires for general purposes must comply with industrial product standard, TIS 902 Part 2(1)-2563 (2020): Fixed General Purpose Luminaires.
Comments were accepted until September 16, 2024.
Official sourceSafety
India
India MNRE Releases Amendment Regulation of Approved Models and Manufacturers of
Solar Photovoltaic Modules
On August 7, 2024, the Ministry of New and Renewable Energy (MNRE) released office memorandum no. 283/43/2024-grid solar regarding amendment regulation of approved models and manufacturers of solar photovoltaic modules (requirement for compulsory registration) order, 2019.
Official sourceSafety
South Africa
South Africa SABS Publishes Draft Standard SANS 60974-9 Ed. 2 for the Installation and Use of Arc Welding Equipment
On July 18, 2024, the South African Bureau of Standards (SABS) published the draft standard SANS 60974-9 Edition 2 titled Arc Welding Equipment Part 9: Installation and Use.
Comments are accepted until September 19, 2024. Any comment on the draft should be sent to mailto:dsscomments@sabs.co.za.
Official sourceSafety
South Africa
South Africa SABS Publishes Draft Standard SANS 60974-3:20XX for Arc Welding Equipment Part 3: Arc Striking and Stabilizing Devices
On July 18, 2024, the South African Bureau of Standards (SABS) published the draft standard SANS 60974-3:20XX Edition 2 titled Arc Welding Equipment Part 3: Arc Striking and Stabilizing Devices.
Comments are accepted until September 19, 2024. Any comment on the draft should be sent to mailto:dsscomments@sabs.co.za.
Official sourceSafety
Saudi Arabia
Saudi Arabia SASO Prepares Draft Law on Product Safety
On August 7, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) prepared draft law on product safety.
Comments and feedback were accepted until September 6, 2024.
Official sourceSafety
Saudi Arabia
Saudi Arabia SASO Prepares Draft Standard and Quality Law
On August 9, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) prepared draft standard and quality law.
Comments and feedback were accepted until September 8, 2024.
Official sourceSafety
Global
International - IEC Publishes New Standard IEC 60269-1:2024 – General Requirements for Low-Voltage Fuses
On August 9, 2024, International Electrotechnical Commission (IEC) released IEC 60269-1:2024. This standard outlines the general requirements for low-voltage fuses.
Official sourceSafety
Global
International - IEC Publishes New Standard IEC 60269-3:2024 – Supplementary Requirements for Fuses for Operation by Unskilled Persons
On August 9, 2024, International Electrotechnical Commission (IEC) released IEC 60269-3:2024. This international standard, part of a series on low-voltage fuses, provides additional requirements for fuses intended for unskilled individuals, primarily in household applications.
Official sourceSafety
India
India DPIIT Releases Draft Quality Control Order for Electric Fence Energizers
On August 12, 2024, the Department for Promotion of Industry and International Trade (DPIIT) released draft notification for Electric Fence Energizers Quality Control Order (QCO), 2024 which aims to prevent deceptive practices and protection of human health or safety, environment and consumers.
Comments and feedback can be sent to mailto:lei-dpiit@gov.in and mailto:dheeraj.meena17@gov.in
until October 11, 2024.
Official sourceSafety
Global
International - IEC Publishes New Standard IEC 60269-4:2024 – Supplementary Requirements for Fuse-Links for the Protection of Semiconductor Devices
On August 9, 2024, International Electrotechnical Commission (IEC) released IEC 60269-4:2024.
This standard provides additional requirements for fuse-links designed to safeguard semiconductor devices, aiming to complement IEC 60269-1, which outlines general low-voltage fuses requirements.
Official sourceSafety
India
India MEITY Releases Circular for Market Surveillance of Products Under Electronics and Information Technology Goods (Requirement of Compulsory Registration) Order
On July 5, 2024, the Ministry of Electronics and Information Technology (MEITY) released circular no. W-47/4/2020-IPHW-MeitY regarding market surveillance of products covered under Electronics and Information Technology Goods (Requirement of Compulsory Registration) Order, 2021.
Official sourceSafety
South Africa
South Africa SABS Publishes Edition 4.1 of Draft Standard SANS 60335-2-53 for the Safety of Sauna Heating Appliances and Infrared Cabins
On August 6, 2024, the South African Bureau of Standards (SABS) published the draft standard, SANS 60335-2-53:XXXX Edition 4.1 or the Household and Similar Electrical Appliances Safety Part 2-53: Particular Requirements for Sauna Heating Appliances and Infrared Cabins.
Comments are accepted until October 10, 2024. Any comment on the draft should be sent to mailto:dsscomments@sabs.co.za.
Official sourceSafety
Saudi Arabia
Saudi Arabia SASO Publishes Resolution No. 93 Regarding Approval of Product Safety Law and Standard and Quality Law Systems
On August 16, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) published Resolution No. 93 regarding approval of law on product safety and standard and quality law systems.
Official sourceSafety
Costa Rica
Costa Rica - INTECO Publishes Draft Standards for Various Electrical Products
On August 12, 2024, Institute of Technical Standards of Costa Rica (INTECO) published the following draft standard for public consultation.- PN INTE/IEC 60335-2-7:2024
- PN INTE N66:2024
Safety
China
China MIIT Publishes a Public Consultation for 9 Mandatory National Standards Including Refrigeration and Air-Conditioning Equipment
On July 17, 2024, the Ministry of Industry and Information Technology (MIIT) released a public consultation for 9 mandatory national standards (draft for comments) including Limit of Harmful Substances of Coating Materials Part 1: Architectural Coatings. The draft standard Refrigeration and Air-Conditioning Equipment—Safety Technical Specification and its preparation instructions (see
Appendix 1 and 2) were also publicly available for public comments until September 14, 2024.
Official sourceSafety
Turkey
Turkey MoIT Publishes the Draft Regulation on Safety of Machinery (2023/1230/EU)
On August 12, 2024, Turkey's Ministry of Industry and Technology (MoIT) opened the draft regulation on Safety of Machinery (2023/1230/EU) for comments. This draft regulation lays down the health and safety requirements for the design and construction of machinery and its related products, including also those partly completed machinery as well as establishing rules on the free movement of these
products.
Closing date for consultation will be on October 11, 2024.
Official sourceSafety
Global
International - IEC Publishes New Standard IEC 61558-2-5:2024 - Requirements and Test for Transformer for Shavers, Power Supply Units for Shavers and Shaver Supply Units
On August 12, 2024, International Electrotechnical Commission (IEC) released IEC 61558-2-5:2024. This standard deals with the safety of shaver transformers, power supply units incorporating a shaver transformer, and shaver supply units.
Official sourceSafety
South Africa
South Africa SABS Publishes a Draft for New Edition of Safety Standard for Deep Fat Fryers and Frying Pans (SANS 60335-2-13)
On August 21, 2024, The South African Bureau of Standards (SABS) published a draft Edition 4 for SANS 60335-2-13:2024. This standard established the safety of household and similar electrical appliances particularly, deep fat fryers, frying pans and similar appliances.
Comments are accepted until October 24, 2024. Any comment on the draft should be sent to mailto:dsscomments@sabs.co.za.
Official sourceSafety
South Africa
South Africa SABS Publishes a Draft for New Edition of Safety Standard for Commercial Spray Extraction Machines (SANS 60335-2-68)
On August 21, 2024, The South African Bureau of Standards (SABS) published a draft Edition 5 for SANS 60335-2-68:2024. This standard established the safety of Household and Similar Electrical Appliances - Part 2-68: Particular Requirements for Spray Extraction Machines for Commercial Use.
Comments are accepted until October 24, 2024. Any comment on the draft should be sent to mailto:dsscomments@sabs.co.za.
Official sourceSafety
Global
International - IEC Publishes New Standard IEC 60384-8:2024 – Sectional Specification for Fixed Capacitors of Ceramic Dielectric, Class 1
On August 14, 2024, International Electrotechnical Commission (IEC) released IEC 60384-8:2024. This standard deals with sectional specification for fixed capacitors of ceramic dielectric, Class 1.
Official sourceSafety
Global
International - IEC Publishes New Standard IEC 60384-9:2024 – Sectional Specification for Fixed Capacitors of Ceramic Dielectric, Class 2
On August 14, 2024, International Electrotechnical Commission (IEC) released IEC 60384-9:2024. This standard deals with sectional specification for fixed capacitors of ceramic dielectric, Class 2.
Official sourceSafety
Israel
Israel MEI Publishes Draft Amendment No. 2 of the Free Import Order
On August 19, 2024, the Ministry of Economy and Industry (MEI) published draft amendment No. 2 of the Free Import Order which aims to update the second addendum to align with the provisions of the Standards Law, 1953 and the Import and Export Ordinance.
Closing date for comments was August 29, 2024.
Official sourceSafety
Uruguay
Uruguay UNIT Publishes Draft Standard PU UNIT IEC 60598-1:2020 – General Requirements and Tests for Luminaires
On August 16, 2024, the Uruguayan Institute of Technical Standards (UNIT) published a draft standard PU UNIT 60598-1:2020 which deals with the general requirements and tests of luminaires.
Feedbacks and comments were accepted until September 16, 2024.
Official sourceSafety
Global
International - IEC Publishes New Standard IEC 60335-2-6:2024 – Safety Requirements for Stationary Cooking Ranges, Hobs, Ovens and Similar Appliances
On August 23, 2024, International Electrotechnical Commission (IEC) released IEC 60335-2-6:2024.
This standard deals with the safety requirements for stationary cooking ranges, hobs, ovens and similar appliances.
Official sourceSafety
EU
European Union - CENELEC Publishes Amended Standard EN IEC 62271-200:2021/A1:2024 - AC Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1kV And Up to and Including 52kV
On August 20, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 62271-200:2021/A1:2024 - High-Voltage Switchgear and Controlgear - Part 200: AC Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and Up to and including 52 kV.
Official sourceSafety
Georgia
The Government of Georgia Publishes Amendment on Resolution No. 50 on Acceptance of Foreign Technical Regulations and Recognition of Conformity Mark and Documents
On August 21, 2024, the Government of Georgia published Resolution No. 270 regarding amendments to the Resolution No. 50 on acceptance of technical regulations of other countries, recognition of compliance documents, acceptance of products with appropriate conformity marks in Georgia without additional conformity assessment procedures and placing of products manufactured in other countries on the market of Georgia without restrictions.
The Resolution is effective on August 21, 2024.
Official sourceSafety
EU
European Union - CENELEC Publishes New Standard EN IEC 62841-2-12:2024 - Electric Motor-Operated Hand-Held Concrete Vibrators
On August 23, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published new standard EN IEC 62841-2-12:2024 - Electric Motor-operated Hand-held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-12: Particular Requirements for Hand-held Concrete Vibrators.Safety
EU
European Union - CENELEC Publishes Amended Standard EN IEC 62841-2-12:2024/A11:2024 - Electric Motor-Operated Hand-Held Concrete Vibrators
On August 23, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 62841-2-12:2024/A11:2024 - Electric Motor-operated Hand-held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-12: Particular Requirements for Hand-held Concrete Vibrators.Safety
Chile
Chile - SEC Publishes New Draft Safety Protocol for Grinder, Disc Sander and Disc Polisher
On August 19, 2024, Superintendency of Electricity and Fuels (SEC) published draft protocol PE Nº6/03:2024 which establishes the safety certification for grinder, disc grinder and disc polisher.
The public consultation will start on August 19, 2024 until October 7, 2024.
The document under consultation and instructions for sending observations and/or comments can be found in the following link.Safety, Chemicals
Israel
Israel MEI Publishes an Order to Update the Import Group of SI 62133 Parts 1 and 2 for Rechargeable Cells and Batteries
On July 3, 2024, Ministry of Economy and Industry (MEI) published an order no. 11350 regarding the import and export decree amendment no. 2 to update the import groups of SI 62133 parts 1 and 2 nickel and lithium systems rechargeable cells and batteries.
This order is effective on July 3, 2024.
Official sourceSafety, EMC
India
India BIS Publishes Revised Standard IS 12640 Part 1:2024/IEC 61008-1:2013 for Residual Current Operated Circuit-Breakers without Integral Overcurrent Protection for Household and Similar Uses (RCCBs)
On July 26, 2024, the Bureau of Indian Standard (BIS) published revised standard IS 12640 part 1:2024/IEC 61008-1:2013 for residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - part 1 general rules to align with IEC 61008-1:2013 Ed. 3.2, which consists of IEC 61008-1:2012 (Ed.3.1) and its amendment 2 (2013).
Revised standard is mandatory on January 26, 2025.
Please contact your local UL Solutions office for more information.Safety, Noise
Ukraine
Ukraine Ministry of Economy Publishes Draft Amendments to the Machinery and Noise Emissions Technical Regulations
On August 20, 2024, the Ministry of Economy published draft resolution of the Cabinet of Ministers of Ukraine On Amendments to Appendix 1 to the Technical Regulations for the Safety of Machines and to the Technical Regulations for Noise Emissions into the Environment from Equipment Used Outside Premises.
Official sourceSafety, Performance
India
India BIS Publishes Revised Standard IS 15558:2024 for Instantaneous Domestic Water Heater for Use with LPG – Specification
On July 9, 2024, the Bureau of Indian Standard (BIS) published revised standard IS 15558:2024 for instantaneous domestic water heater for use with LPG - specification (first revision) in notification Ref: HQ-PUB012/4/2020-PUB-BIS (949).
Revised standard is mandatory on January 5, 2025.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN IEC 60317-82:2020/A1:2024
- Polyesterimide Enameled Rectangular Copper Wire, Class 200
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 60317-82:2020/A1:2024 - Specifications for Particular Types of Winding Wires - Part 82: Polyesterimide Enameled Rectangular Copper Wire, Class 200.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN IEC 60317-74:2018/A1:2024
- Polyesterimide Enameled Rectangular Aluminium Wire, Class 180
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 60317-74:2018/A1:2024 - Specifications for Particular Types of Winding Wires - Part 74: Polyesterimide Enameled Rectangular Aluminium Wire, Class 180.Safety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN IEC 60317-73:2018/A1:2024
- Polyamide-Imide Enameled Rectangular Aluminium Wire, Class 200
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 60317-73:2018/A1:2024 - Specifications for Particular Types of Winding Wires - Part 73: Polyester or Polyesterimide Overcoated With Polyamide-imide Enameled Rectangular Aluminium Wire, Class 200.Safety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-69:2017/A1:2024 -
Polyamide-Imide Enameled Rectangular Aluminium Wire, Class 220
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-69:2017/A1:2024 - Specifications for Particular Types of Winding Wires - Part 69: Polyester or Polyesterimide Overcoated With Polyamide-imide Enameled Rectangular Aluminium Wire, Class 220.Safety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-68:2017/A2:2024 -
Polyvinyl Acetal Enameled Rectangular Aluminium Wire, Class 120
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-68:2017/A2:2024 for specifications for particular types of winding wires - part 68: polyvinyl acetal enameled rectangular aluminium wire, class 120.
Official sourceSafety, Performance
Morocco
Morocco IMANOR Releases Draft Standards for Solar LED Street Lights and LED Modules for General Lightning
On August 1, 2024, the Moroccan Institute of Standardization (IMANOR) released public inquiry no. EP 52/2024 relating to draft standards PNM 06.8.001 solar LED street lights for street lighting - general requirements and PNM IEC 62717 LED modules for general lighting - performance requirements.
Closing date of comments is on September 30, 2024 and can be sent thru this link.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-47:2014/A1:2024 -
Aromatic Polyimide Enameled Rectangular Copper Wire, Class 240
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-47:2014/A1:2024 - Specifications for Particular Types of Winding Wires - Part 47: Aromatic Polyimide Enameled Rectangular Copper Wire, Class 240.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-46:2014/A1:2024 -
Aromatic Polyimide Enameled Round Copper Wire, Class 240
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-46:2014/A1:2024 - Specifications for Particular Types of Winding Wires - Part 46: Aromatic Polyimide Enameled Round Copper Wire, Class 240.Safety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-38:2014/A1:2024 -
Polyamide-Imide, Enameled Round Copper Wire, Class 200
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-38:2014/A1:2024 - Specifications for Particular Types of Winding Wires - Part 38: Polyester or Polyesterimide Overcoated With Polyamide-imide, Enameled Round Copper Wire, Class 200, With a Bonding Layer.Safety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-37:2014/A1:2024 -
Polyesterimide Enameled Round Copper Wire, Class 180
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-37:2014/A1:2024 - Specifications for Particular Types of Winding Wires - Part 37: Polyesterimide Enameled Round Copper Wire, Class 180, With a Bonding Layer.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-36:2014/A2:2024 -
Solderable Polyesterimide Enameled Round Copper Wire, Class 180
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-36:2014/A2:2024 - Specifications for Particular Types of Winding Wires - Part 36: Solderable Polyesterimide Enameled Round Copper Wire, Class 180, With a Bonding Layer.Safety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-35:2014/A2:2024 -
Solderable Polyurethane Enameled Round Copper Wire, Class 155
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-35:2014/A2:2024 - Specifications for Particular Types of Winding Wires - Part 35: Solderable Polyurethane Enameled Round Copper Wire, Class 155, With a Bonding Layer.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN IEC 60317-27-4:2020/A1:2024 - Paper Tape Covered Rectangular Aluminium Wire
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 60317-27-4:2020/A1:2024 - Specifications for Particular Types of Winding Wires - Part 27-4: Paper Tape Covered Rectangular Aluminium Wire.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN IEC 60317-27-3:2019/A1:2024 - Paper Tape Covered Rectangular Copper Wire
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN IEC 60317-27-3:2019/A1:2024 - Specifications for Particular Types of Winding Wires - Part 27-3: Paper Tape Covered Rectangular Copper Wire.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-15:2004/A2:2024 -
Polyesterimide Enameled Round Aluminium Wire, Class 180
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-15:2004/A2:2024 - Specifications for Particular Types of Winding Wires - Part 15: Polyesterimide Enameled Round Aluminium Wire, Class 180.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-0-9:2015/A1:2024 -
General Requirements - Enameled Rectangular Aluminium Wire
On August 2, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-0-9:2015/A1:2024 - Specifications for Particular Types of Winding Wires - Part 0-9: General Requirements - Enameled Rectangular Aluminium Wire.
Official sourceSafety, Performance
South Africa
South Africa SABS Publishes Draft Standard SANS 60974-5:2024 Ed. 3 for Wire Feeders of Arc Welding Equipment
On July 19, 2024, the South African Bureau of Standards (SABS) published the draft standard SANS 60974-5:2024 Edition 3 titled Arc Welding Equipment Part 5: Wire Feeders
Comments are accepted until September 19, 2024. Any comment on the draft should be sent to mailto:dsscomments@sabs.co.za.Safety, Performance
Bangladesh
Bangladesh MOI Publishes New Additional Products in the List of Mandatory Products of BSTI
On August 7, 2024, the Ministry of Industries (MOI) published S.R.O. No. 284-Act/2024 and S.R.O. No. 285-Act/2024 adding 26 new products in the list of mandatory products of BSTI (Bangladesh Standards and Testing Institution) wherein household electric kettles, PVC pipes for electrical conduits and molded case circuit breaker (MCCB) low voltage switchgear and controlgear are included.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-59:2016/A1:2024 -
Polyamide-Imide Enameled Round Copper Wire, Class 240
On August 9, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-59:2016/A1:2024 - Specifications for Particular Types of Winding Wires - Part 59: Polyamide-imide Enameled Round Copper Wire, Class 240.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-58:2010/A1:2024 -
Polyamide-Imide Enameled Rectangular Copper Wire, Class 220
On August 9, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-58:2010/A1:2024 - Specifications for Particular Types of Winding Wires - Part 58: Polyamide-imide Enameled Rectangular Copper Wire, Class 220.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-57:2010/A1:2024 -
Polyamide-Imide Enameled Round Copper Wire, Class 220
On August 9, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-57:2010/A1:2024 - Specifications for Particular Types of Winding Wires - Part 57: Polyamide-imide Enameled Round Copper Wire, Class 220.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-28:2014/A1:2024 -
Polyesterimide Enameled Rectangular Copper Wire, Class 180
On August 9, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-28:2014/A1:2024 - Specifications for Particular Types of Winding Wires - Part 28: Polyesterimide Enameled Rectangular Copper Wire, Class 180.
Official sourceSafety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-13:2010/A1:2024 -
Polyamide-Imide Enameled Round Copper Wire, Class 200
On August 9, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-13:2010/A1:2024 - Specifications for Particular Types of Winding Wires - Part 13: Polyester or Polyesterimide Overcoated With Polyamide-imide Enameled Round Copper Wire, Class 200.Safety, Performance
EU
European Union - CENELEC Publishes Amended Standard EN 60317-8:2010/A1:2024 -
Polyesterimide Enameled Round Copper Wire, Class 180
On August 9, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published amended standard EN 60317-8:2010/A1:2024 - Specifications for Particular Types of Winding Wires - Part 8: Polyesterimide Enameled Round Copper Wire, Class 180.
Official sourceSafety, Sanitation, Wireless, Chemicals
China
China SAC/SAMR Issues 218 Recommended National Standards and 1 Standard Revision
Including the Safety Standards for Various Household and Similar Electrical Appliances
On July 24, 2024, the National Standardization Administration (SAC) of the State Administration for Market Regulation (SAMR) published the Announcement No. 15 of 2024 to approve 218 Recommended National Standards and 1 Standard Revision, including the GB/T 4706 series standards for the safety requirements of various household and similar electrical appliances. A part of standards are relevant to China Compulsory Product Certification (CCC) in Household and Similar Purpose Equipment Category.
Official sourceSafety, Wireless, Performance
United Arab Emirates
UAE MoIAT Publishes Resolution on the Technical Requirements for eCall Emergency
Communication in Vehicles
On July 15, 2024, the Ministry of Industry & Advanced Technology (MoIAT) of United Arab Emirates published Cabinet Resolution No. (84) of 2024 on the technical requirements for eCall emergency communication in vehicles.Sanitation
Uruguay
Uruguay MIEM Releases Public Consultation on the Modification of the MERCOSUR Technical Regulation on Regenerated Cellulose Film Intended to be in Contact with Food
On July 8, 2024, the Ministry of Industry, Energy and Mining (MIEM) released Draft Resolution No. 01/24 MERCOSUR Technical Regulation for Regenerated Cellulose Films Intended to Come into Contact with Food. The harmonization of the Technical Regulation tends to eliminate the trade barriers generated by the different national regulations, in accordance with the provisions of the Treaty of Asunción of the technical requirements to be met by regenerated cellulose films.
The deadline for comments is on September 21, 2024.
Official sourceSanitation
Germany
Germany UBA Publishes Guidance Document on New EU Hygienic Requirements for Materials in Contact with Drinking Water
On July 25, 2024, the German Environment Agency (Umweltbundesamt - UBA) published a guidance document on new European Union hygienic requirements for materials in contact with drinking water according to Directive (EU) 2020/2184. It discusses the current legal situation, the future European regulations, and the corresponding transitional provisions for materials in contact with drinking water.
Official sourceSanitation
Indonesia
Indonesia BPOM Publishes Draft Revision of Food Packaging Regulation
On August 1, 2024, the Indonesia National Agency of Drug and Food Control (Badan Pengawas Obat dan Makanan (BPOM)), published a draft revised version of the 2019 Food Packaging Regulation through World Trade Organization (WTO) website. If approved, the draft regulation will enter into force on the date of promulgation and repeal Regulation No. 20 of 2019 on Food Packaging (Peraturan BPOM Nomor 20 Tahun 2019 Tentang Kemasan Pangan).
Comments are invited until September 30, 2024.
Official sourceSanitation
EU
European Union - EDQM Publishes New Guidelines for Metal and Alloys Food Contact Materials
On August 1, 2024, the European Directorate for the Quality of Medicines & Healthcare (EDQM) of the Council of Europe published a revised technical guide to ensure the safety and quality of food contact materials and articles made from metals and alloys.
Official sourceSanitation
South Korea
South Korea MFDS Publishes Partial Revision of Standards and Specifications for Food Utensils, Containers and Packaging
On June 21, 2024, the Ministry of Food and Drug Safety published Notice No. 2024-29 Partial Revision of Standards and Specifications of Food Utensils, Containers, and Packaging. The key points of this revision are improvements of:
- printing standards for food contact surfaces of food equipment; and
- arsenic quantitative analysis method using calibration curve.
Official sourceSanitation
China
China NHC Notifies Approval on New Food Contact Resin
On August 5, 2024, National Health Commission (NHC) of the People's Republic of China announced approval of Poly (neopentyl glycol-co-terephtalic acid-co-monoethylene glycol-co-isophtalic acid-co-monopropylene glycol-co-Fatty acids, C18-unsaturated, dimers, hydrogenated-co-1,6-haxanediol-co-trimethylol propane), a resin for use as a new kind of food contact material.
Official sourceSanitation
Germany
Germany BFR Publishes Updated Recommendations on Certain Food Contact Materials
On August 1, 2024, the German Federal Institute for Risk Assessment (Bundesinstitut für Risikobewertung - BfR), published updated recommendations for food contact materials, particularly:
- Silicone
- Paper, cardboard and paperboard
- Cooking and hot filter papers and filter layers
- Paper, cardboard, and paperboard for baking purposes
- Temperature-resistant coating systems made of polymers for frying, cooking, and baking equipment
Official sourceSustainability
USA
USA House of Representatives Introduces the Proposal on Fair Repair Act for Digital Electronic Equipment
On May 23, 2024, the US House of Representatives introduced the proposal on Fair Repair Act for digital electronic equipment, which was referred to the Committee on Energy and Commerce to require original equipment manufacturers of digital electronic equipment to make available certain documentation, diagnostic, and repair information to independent repair providers, and for other purposes.
Official sourceSustainability
Canada
Canada - Competition Bureau Launches Public Consultation on Competition Act's New Greenwashing Provisions
On July 22, 2024, the Canada Competition Bureau solicits feedback on specific questions about the new greenwashing provisions of the Competition Act. The Bureau is collaborating with the consultation to develop enforcement guidelines for environmental claims related to new rules on greenwashing, which require firms to provide testing or evidence.
The deadline for feedback is on September 27, 2024.
Official sourceSustainability, Electrical and Electronic Waste
India
India MoEFCC Issues an Order Extending Timelines for Waste Battery Return Filings
On July 10, 2024, India Ministry of Environment, Forest & Climate Change (MoEFCC) issued an order extending the timeline for battery companies to file yearly returns under the Battery Waste Management Rules, 2022. The updated deadline is August 30, 2024.
Official sourceWireless
India
India Ministry of Communications Announces the Effectivity of the Latest Telecommunications Act 2023
On June 22, 2024, the Ministry of Communications of India published an notification on the Facebook to announce that the latest Telecommunications Act of 2023 was approved by the India government and key provisions in this Act have put into force from June 26, 2024.
Official sourceWireless
Ukraine
Ukraine NCEC Publishes Lists on Use of Radio Equipment and Radiating Devices by General Users of the Radio Frequency Spectrum
On July 3, 2024, the National Commission for the State Regulation of Electronic Communications, Radio Frequency Spectrum and Provision of Postal Services (NCEC) of Ukraine published the following documents under Resolution No.361 dated 03.07.2024:
- List of Radio Equipment, the Operation of Which is Carried Out on the Basis of Radio Frequency Assignment
- List of Parameters of Radio Equipment, in Case of Compliance With Which It is Not Necessary to Carry Out Calculations of Electromagnetic Compatibility
- List of Technical Characteristics and Operating Conditions of Radio Equipment, Radiating Devices, the Operation of Which is Carried Out on the Principle of General Authorization
Official sourceWireless
Bangladesh
Bangladesh BTRC Publishes the Public Consultation for Draft Guidelines for Import, Use, Marketing and Registration Certificate of Wireless Equipment
On June 11, 2024, the Bangladesh Telecommunication Regulatory Commission (BTRC) published the draft Guidelines for Import, Use, Marketing and Registration of Wireless Equipment - 2024 for the public opinions. The purpose for this proposal is to monitor or control all the wireless devices which under the Bangladesh Telecommunication Regulation starting from import to customer level usage.
Feedback were accepted until June 30, 2024.
Official sourceWireless
EU
The European Commission Publishes the Harmonization of the 42 GHz Band for Terrestrial Systems
On July 22, 2024, the European Commission published Implementing Decision (EU) 2024/1983 of 18 July 2024 on the harmonization of the 40,5-43,5 GHz frequency band for terrestrial systems capable of providing wireless broadband electronic communications services in the Union. This should ensure increased coordinated availabilities of radio spectrum to achieve very high speed fixed and wireless
networks and coexistence between wireless broadband (WBB) electronic communications services (ECS), including 5G, and fixed links.
Member States shall implement this Decision by December 31, 2026
Official sourceWireless
Serbia
Serbia RATEL Publishes Allocation Plan for the 880–915/925–960 MHz and 1710–1785/1805–1880 MHz Bands
On July 19, 2024, the Regulatory Agency for Electronic Communications and Postal Services (RATEL) of Serbia published the following documents:
- Plan for the Distribution of Radio Frequencies in Radio Frequency Bands 880-915/925-960 MHz
- Plan for the Distribution of Radio Frequencies in Radio Frequency Bands 1710-1785/1805-1880 MHz
Official sourceWireless
EU
The European AI Commission Opens Consultation on Trustworthy General-Purpose AI Models
On July 30, 2024, the European AI Office launched a multi-stakeholder consultation on trustworthy general-purpose AI models under the AI Act. This shall help detail out rules for general-purpose AI model providers including forming a template for the summary of the content used for the training of the general-purpose AI models and the accompanying guidance.
Responses were accepted until September 10, 2024.
Official sourceWireless
Trinidad & Tobago
Trinidad and Tobago TATT Publishes Spectrum Plan for Public Mobile Telecommunications Services
On August 2, 2024, the Telecommunications Authority of Trinidad and Tobago (TATT) published the Spectrum Plan for the Accommodation of Public Mobile Telecommunications Services (Version 5.0), which sets out the the spectrum ranges, channel assignment plans, licensing conditions and technical operating conditions and specifications for the frequency bands that are available for public mobile telecommunications services.
Official sourceWireless
Namibia
Namibia CRAN Announces Move to New Office Location
On August 1, 2024, the Communications Regulatory Authority of Namibia (CRAN) announced their move to a new office location.
Official sourceWireless
Singapore
Singapore IMDA Announces Start of 3G Services Shutdown
On July 24, 2024, the Infocomm Media Development Authority (IMDA) of Singapore announced that shutdown of 3G services will be done in phases.
Official sourceWireless
India
India TEC Issues a Correction to the Exemption of GPS Parameters of Applicable ERs Under MTCTE
On August 7, 2024, the Telecommunications Centre (TEC) of India released F.N. 5-5/2024-TC/TEC, a corrigendum to the initial Exemption pertaining to GPS parameters of applicable ERs under MTCTE. The exemption is clarified to be until September 30, 2024.
Official sourceWireless
Thailand
Thailand NBTC Announces Testing of 6 GHz Band for Medical Applications
On July 19, 2024, the Office of the National Broadcasting and Telecommunications Commission (NBTC) announced the testing of 6 GHz band for medical applications.
Official sourceWireless
EU
The European Commission Publishes a Draft Updating the Implementation of Frequency Bands for Several Categories of Short-Range Devices
On August 1, 2024 the European Commission opened a consultation for the Draft Commission Implementing Decision amending Commission Decision 2006/771/EC updating harmonized technical conditions in the area of radio spectrum use for short-range devices and repealing Commission Decision 2014/641/EU on harmonized technical conditions of radio spectrum use by wireless audio program making and special events equipment in the Union. This updates the provision requiring EU members to make available a list of harmonized radio spectrum.
Comments are accepted until September 30, 2024.
Official sourceWireless
Saudi Arabia
Saudi Arabia CST Publishes Revised IoT Regulations
On July 31, 2024, the Communications, Space & Technology Commission (CST) of Saudi Arabia published the Internet of Things (IoT) Regulations (RT12 Third Version) under Decision Number 556/1446.
Official sourceWireless
Oman
Oman TRA Opens Public Consultation on Ultra-Wide Band Devices Regulation
On August 6, 2024, the Telecommunications Regulatory Authority (TRA) of Oman opened a public consultation on the Regulation for UWB Devices in Oman.
Comments were accepted until September 2, 2024.
Official sourceWireless
Brazil
Brazil ANATEL Amends the Technical and Operational Requirements for Satellite Communication Systems
On July 31, 2024, the National Telecommunications Agency (ANATEL) published Act No.11190, of July 31, 2024. This act amends the technical and operational requirements for satellite communication systems. For this amendment, a new condition regarding The use of radio frequency bands assigned for satellite radiocommunication services is established.
The new provision takes effect on August 5, 2024.
Official sourceWireless
Oman
Oman TRA Publishes Devices Exempted From Type Approval
On August 8, 2024, the Telecommunications Regulatory Authority (TRA) of Oman published the Resolution No. 14-1152/2/18/2024 By Specifying The Devices Excluded From The Type Approval Requirement.
Official sourceWireless
Libya
Libya CIM Opens Public Consultation on Transition Plan to Internet Protocol Version 6 (IPv6)
On August 11, 2024, the Communications and Informatics Authority (CIM) of Libya opened a public consultation on the first draft of the National Transition Plan to Internet Protocol Version 6.
While the deadline for comments is not stated, comments can be submitted to mailto:info.consultancy@cim.gov.ly.
Official sourceWireless
Kenya
Kenya CAK Shall Start Processing Type Approval for Short Range Devices
On May 21, 2024, the Communications Authority of Kenya informed stakeholders that they now accept requests for Type Approval for Short Range Devices.
Please contact your local UL Solutions office for more information.Wireless
India
India Ministry of Communications Releases the Amendments to the Exemption from Licensing Requirement of Short Range Frequency Devices
On August 14, 2024, the Ministry of Communications of India published the notification G.S.R. 271(E) Use of Low Power and Very Low Power Short Range Radio Frequency Devices (Exemption from Licensing Requirement) Amendment Rules, 2024 which was issued on May 9, 2024 to amend exemption requirements for updating a frequency range for the 24GHz band in old notification GSR. 1047 (E).
This amendment came into force on May 9, 2024 as per Indian gazette notification date in the document.
Official sourceWireless
Mexico
Mexico IFT Opens Public Consultation on Rules That Establish the Deadlines and Requirements for the Granting of the Authorizations
On July 10, 2024, the Federal Telecommunications Institute (IFT) of Mexico opened a public consultation on the Draft Agreement by Which the Plenary of the Federal Telecommunications Institute Modifies the General Rules That Establish the Terms and Requirements for Granting Authorizations in Telecommunications Matters Established in the Federal Telecommunications and Broadcasting Law.Comments were accepted until August 21, 2024.
Official sourceWireless
Nigeria
Nigeria NCC Publishes Type Approval Regulations
On July 29, 2024, the Nigerian Communications Commission (NCC) published the Nigerian Communications (Type Approval) Regulations, 2024.
Official sourceWireless
Nigeria
Nigeria NCC Publishes Type Approval Business Rules
On August 14, 2024, the Nigerian Communications Commission (NCC) published the Type Approval Business Rules which was issued pursuant to the Nigerian Communications (Type Approval) Regulations, 2024.
Official sourceWireless
Brazil
Brazil Anatel Opens a Public Consultation for Amending the Requirements for the Use of Radio Frequency Bands Associated with the Limited Private Service
On August 16, 2024 the National Telecommunications Agency (ANATEL) published Public Consultation No. 43, Amend the Technical and Operational Requirements for the use of radio frequency bands associated with the limited private service, provided by terrestrial systems, approved by Act No. 915, of February 1, 2024. The act simplifies the conditions of use relating to Private Limited
Service.
Comments were accepted until August 31, 2024.
Official sourceWireless
Trinidad & Tobago
Trinidad and Tobago TATT Opens Second Round of Public Consultation on the Framework for the Authorization of Standalone Ancillary Terrestrial Component (ATC) Systems
On August 2, 2024, the Telecommunications Authority of Trinidad and Tobago (TATT) opened the second round of public consultation on the Framework for the Authorization of Standalone Ancillary Terrestrial Component (ATC) Systems.
Comments are accepted until September 27, 2024 and can be submitted to mailto:info.consultancy@cim.gov.ly.
Official sourceWireless
Qatar
Qatar CRA Announces Shutdown of 3G Services
On August 19, 2024, the Communications Regulatory Authority (CRA) of Qatar made an announcement regarding shutdown of 3G services.
Official sourceWireless
Malaysia
Malaysia MCMC Opens Public Consultation on Technical Code for Land Mobile Radio Equipment
On August 21, 2024, the Malaysian Communications and Multimedia Commission (MCMC) opened a public consultation on Technical Code - Land Mobile Radio Equipment (Second Revision) (MCMC MTSFB TC TXXX:2024).
Comments are accepted until September 20, 2024, and must be submitted to this link.
Official sourceWireless
Taiwan
Taiwan NCC Publishes Amendment of Technical Specifications for the Approval of Base Stations for Public Telecommunications Networks
On August 21, 2024, the National Communications Commission of Taiwan published the amendment of the Technical Specifications for the Approval of Base Stations for Public Telecommunications Networks (Circular No. 11350025151), which is effective on the same day.
Official sourceWireless
Taiwan
Taiwan NCC Publishes Amendment of Management Measures for the Installation and Use of Base Stations for Public Telecommunications Networks
On August 21, 2024, the National Communications Commission of Taiwan published the amendment of the Management Measures for the Installation and Use of Base Stations for Public Telecommunications Networks (Circular No. 11350025150), which is effective on the same day.
Official sourceWireless
Indonesia
Indonesia KOMINFO Publishes the Updated Technical Standards of LTE and IMT-2020 Equipment
On July 25, 2024 the Ministry of Communication and Information Technology of Indonesia published Ministerial Decree No. 352 of 2024 regarding Technical Standards for Telecommunication Equipment and/or Mobile Telecommunications Devices Based on Long Term Evolution Technology and International Mobile Telecommunications-2020 Standards.
Official sourceWireless
Israel
Israel MOC Publishes a Draft Expanding the List of Devices that are Exempted from Licensing
On August 21, 2024, the Ministry of Communications published a draft Wireless Telegraph (Exemption from Licensing) (Amendment) Regulations, 2024. This aims to expand the exemptions From the need to obtain the Ministry's approval for commercial or personal imports.
Comments were accepted until August 30, 2024.
Official sourceWireless
Maldives
Maldives CAM Publishes Updated Technical Standard for SRD
On August 27, 2024, the Communications Authority of Maldives (CAM) published the Technical Standard for Short Range Devices (CAM TS 105/2024- SRD Issue 2, August 2024) which sets out the minimum technical and compliance requirements for SRDs.Wireless
Singapore
Singapore IMDA Publishes Update on Guide for Registration of Telecommunication Equipment
On August 28, 2024, the Infocomm Media Development Authority (IMDA) of Singapore published the Guide for Registration of Telecommunication Equipment (IMDA GUIDE EQR) (Issue 1, Rev 11 August 2024).
Official sourceWireless, Cyber Security
EU
CENELEC Publishes Standards for Security Requirements for Radio Equipment (EN 18031 series)
On August 14, 2024, the European Committee for Standardization released standards for common security requirements for radio equipment as follows:
1. EN 18031-1:2024 - Common Security Requirements for Radio Equipment - Part 1: Internet Connected Radio Equipment
2. EN 18031-2:2024 - Common Security Requirements for Radio Equipment - Part 2: Radio Equipment Processing Data, Namely Internet Connected Radio Equipment, Childcare Radio Equipment, Toys Radio Equipment and Wearable Radio Equipment
3. EN 18031-3:2024 - Common Security Requirements for Radio Equipment - Part 3: Internet Connected Radio Equipment Processing Virtual Money or Monetary ValueWireless, Safety
EU
The European Commission Publishes Updates Regulation on Small-Area Wireless Access Points
On July 25, 2024, the European Commission published Implementing Decision EU) 2024/2000 of 24 July 2024 amending Implementing Regulation (EU) 2020/1070 to rationalize reporting on its application and to enable the usage of active antenna systems. This updates provisions for the physical and technical characteristics of small-area wireless access points.
This comes into force on August 14, 2024, 20 days after appearing on the official journal.
Official source- July 2024 updates
Regulation
Country
Summary
Juvenile Products USA U.S. CPSC Issues Notice to Incorporate ASTM F2236–24 Standard Consumer Safety Specification for Soft Infant and Toddler Carriers
On September 10, the U.S. Consumer Product Safety Commission (CPSC) has issued a notice requesting for comments on the proposal to incorporate by reference ASTM F2236– 24, Standard Consumer Safety Specification for Soft Infant and Toddler Carriers. ASTM F2236– 24 establishes performance requirements, test methods, and marking requirements to promote safe use of soft infant and toddler carriers.
The U.S. CPSC is assessing the revised voluntary standard to determine, consistent with section 104(b)(4)(B) of the CPSIA, its effect on the safety of consumer products covered by the standard. CPSC is accepting comments by September 24, 2024.Chemicals EU ECHA Receives Proposals to Indentify Six Substances as SVHCs
On August 30, the European Chemicals Agency (ECHA) has received proposals to identify the following substances as substances of very high concern (SVHCs):- 6-[(C10-C13)-alkyl-(branched, unsaturated)-2,5-dioxopyrrolidin-1-yl]hexanoic acid (EC 701-118-1) - Used in lubricants, greases, release products and metal working fluids.
- O,O,O-triphenyl phosphorothioate (EC 209-909-9) - Used in lubricants and greases.
- Octamethyltrisiloxane (EC 203-497-4). Used in the manufacture and formulation of personal and health care products, pharmaceuticals, washing and cleaning products, coating and non-metal surface treatment, and in sealants and adhesives.
- Perfluamine (EC 206-420-2) - Used for the manufacture of electrical, electronic and optical equipment, and machinery and vehicles.
- Reaction mass of: triphenylthiophosphate and tertiary butylated phenyl derivatives (EC 421-820-9).
- Tris(4-nonylphenyl, branched and linear) phosphite (EC -) - Used in the following products: polymers, adhesives and sealants, and coatings. ECHA is accepting comments until October 14, 2024.
Artificial Intelligence
Global
ISO and IEC Publish New Standard ISO/IEC 15067-3-51:2024 – Framework of a Narrow AI Engine for a Premises Energy Management System
On June 28, 2024, the International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) published ISO/IEC 15067-3-51:2024. This standard deals with framework of a narrow AI engine for a premises energy management system using energy management agents.
Official sourceArtificial Intelligence
EU
European Union EC Publishes Artificial Intelligence Act
On July 12, 2024, the European Commission (EC) published Regulation (EU) 2024/1689 of the European Parliament and of the Council of 13 June 2024 laying down harmonized rules on artificial intelligence and amending Regulations (EC) No 300/2008, (EU) No 167/2013, (EU) No 168/2013, (EU) 2018/858, (EU) 2018/1139 and (EU) 2019/2144 and Directives 2014/90/EU, (EU) 2016/797 and (EU) 2020/1828 (Artificial Intelligence Act)
This regulation entered into force on Aug. 2, 2024.
Official sourceArtificial Intelligence
China
China Issues Shanghai Declaration on Global Governance of Artificial Intelligence
On July 4, 2024, the World Artificial Intelligence Conference and High-Level Conference on Global Governance of Artificial Intelligence issued the Shanghai Declaration on Global Governance of Artificial Intelligence. The objective of this initiative is promote the development and application of AI technology,
while ensuring safety, reliability, controllability and fairness in its development.
Official sourceArtificial Intelligence
China
China MIIT Releases the Guidelines for the Construction of a Comprehensive Standardization System for the National AI Industry
On July 2, 2024, the Ministry of Industry and Information Technology (MIIT) together with the Office of the Central Cyber Security and Information Commission (CSIC), National Development and Reform Commission (NDRC) and the Standardization Administration of the People's Republic of China (SAC) published the announcement No. 113 of 2024 to release Guidelines for the Construction of a Comprehensive Standardization System for the National Artificial Intelligence Industry (2024 Edition).
This aims to strengthen systematic planning and accelerate the construction of a standard system that meets the high-quality development of the AI industry and the high-level empowerment it needs.
Official sourceArtificial Intelligence, Cyber Security
Vietnam
Vietnam MIC Opens Public Consultation on Draft Law on Digital Technology Industry
On July 2, 2024, the Vietnam Ministry of Information and Communications (MIC) opened a public consultation on the Draft Law on Digital Technology Industry.
Comments were accepted until Sept. 2, 2024.
Official sourceChemicals
EU
European Union ECHA Adds Bis(a,a-Dimethylbenzyl) Peroxide to the Candidate List of SVHC
On June 27, 2024, the European Chemicals Agency (ECHA) added Bis(α,α-dimethylbenzyl) Peroxide (CAS No. 80-43-3) to the Candidate List of Substances of Very High Concern (SVHC). The SVHC Candidate List now contains 241 entries for chemicals that can harm people or the environment.
Official sourceChemicals
Israel
Israel Ministry of Environmental Protection Publishes Draft Additional Conditions in a Poison Permit for PFAS Compounds
On June 30, 2024, the Israel Ministry of Environmental Protection published draft of Additional Conditions in a Poison Permit for PFAS Compounds after conducting a comprehensive study on the environmental impacts of PFAS, based on the Stockholm Convention and regulations in the EU and U.S., and is now publishing findings for public comments.
Comments were accepted until July 31, 2024.
Official sourceChemicals
USA Connecticut
USA – Connecticut DEEP Approves Act on the Use of PFAS in Certain Products
On June 5, 2024, the Department of Energy and Environmental Protection (DEEP) approved an act concerning the use of PFAS in certain products, including cookware.
This act will be effective on Oct. 1, 2024, while requirements will start applying by Jan. 1, 2026.
Official sourceChemicals
EU
European Union EC Publishes Draft Amendment to Persistent Organic Pollutants (POPs) Regulation to Add Dechlorane Plus
On June 26, 2024, the European Commission (EC) published Draft Commission Delegated Regulation amending Annex I to the Regulation (EU) 2019/1021 on persistent organic pollutants to include Dechlorane Plus as a substance subject to certain restrictions.
The feedback period was until July 24, 2024.
Official sourceChemicals
Finland
Finland MSAH Invites Comments on Draft Decree on the Labeling and Other Appearance of Tobacco and Related Products and Their Unit Packets
On June 5, 2024, the Finland Ministry of Social Affairs and Health (MSAH) published a draft decree on the labeling and other appearance of tobacco and related products, as well as their unit packets (591/2016) to include more specific provisions for warning labels on unit packages of smokeless nicotine. The draft
decree includes amendment on Tobacco Act (549/2016).
Comments were accepted until Aug. 7, 2024.
Official sourceChemicals
Finland
Finland MSAH Consults on Draft Decree Amending the Decree on Standards and Notifications Concerning Tobacco and Related Products
On June 5, 2024, the Finland Ministry of Social Affairs and Health (MSAH) published a proposal to amend the Decree on Standards and Notifications Concerning Tobacco Products and Related Products (592/2016) to take into account smokeless nicotine products. The draft decree includes amendment on Tobacco Act (549/2016).
Comments were accepted until Aug. 7, 2024.
Official sourceChemicals
Canada
Canada ECCC Publishes Regulations Amending the Products Containing Mercury Regulations
On June 19, 2024, the Canada Environment and Climate Change Canada (ECCC) published Regulations Amending the Products Containing Mercury Regulations, SOR/2024-109, in Canada Gazette, Part II. The amending regulation aims to protect Canadians by reducing mercury-release risks, meeting Minamata Convention requirements, phasing out mercury-added products, aligning with international initiatives and clarifying regulatory provisions.
The regulation will come into force on June 19, 2025.
Official sourceChemicals
EU
European Parliament and the Council of the European Union Publishes Amendment to Regulation on Mercury as Regards Dental Amalgam and Other Mercury-Added Products
On July 10, 2024, the European Parliament and the Council of the European Union published Regulation EU 2024/1849 amending the regulation on mercury as regards dental amalgam and other mercury-added products subject to export, import and manufacturing restrictions was published in the Official Journal of the European Union. The regulation aims to significantly reduce mercury emissions and environmental exposure by gradually phasing out mercury-added products and setting implementation timelines.
This regulation entered into force on July 30, 2024, and will be binding in its entirety and directly applicable in all Member States.
Official sourceChemicals
Japan
Japan METI Publishes Draft Revision of the Enforcement Order of the Act on Preventing Mercury Pollution of the Environment
On July 4, 2024, the Ministry of Economy, Trade and Industry (METI) of Japan published the draft of Revision of the Enforcement Order of the Act on Preventing Mercury Pollution of the Environment through the World Trade Organization (WTO) website.
The final date for comments was Sept. 2, 2024.
Official sourceChemicals
USA
USA EPA Proposes New Rules to Protect Workers and Consumers Against Solvent N-Methylpyrrolidone (NMP)
On June 5, 2024, the U.S. Environmental Protection Agency (EPA) announced a proposed rule N-methylpyrrolidone (NMP); Rulemaking under TSCA Section 6(a)(CASRN 872-50-4) to prohibit the manufacture (including import), processing, and distribution in commerce and use of NMP solvent N-methylpyrrolidone (NMP).
Comments were accepted until July 29, 2024.
Official sourceChemicals
EU
European Union EC Issues Updated Rolling List of Substances for Restrictions Under the Chemicals Strategy for Sustainability
On July 3, 2024, the European Commission (EC) issued an updated Rolling List of (Groups of) Substances for Restriction, renewing Annex I to the Restrictions Roadmap under the Chemicals Strategy for Sustainability. The roadmap outlines REACH efforts and plans, prioritizing group restrictions for harmful substances and aligning with the European Union's chemicals strategy for sustainability.
Official sourceChemicals
Canada
Canada Government Publishes Updated Draft State of Per- and Polyfluoroakyl Substances Report and Revised Risk Management Scope for Public Consultation
On July 13, 2024, the Government of Canada published an updated draft state of per-and polyfluoroalkyl substances (PFAS) report and the revised risk management scope of per- and polyfluoroalkyl substances (PFAS) for a 60-day public comment period.
A summary of public comments received on the previous draft report (published May 2023), risk management scope and government responses were also published.
The deadline for comments is Sept. 11, 2024.
Official sourceChemicals
Thailand
Thailand OCPB Publishes Order Prohibiting the Production or Sale of Hookahs, E-Cigarettes and Related Products
On July 8, 2024, the Office of the Consumer Protection Board (OCPB) announced an order prohibiting the sale and production of hookahs, electronic hookahs or e-cigarettes, hookah medicine, and liquid for refilling electronic hookahs or e-cigarettes.
This order came into force on July 18, 2024.
Official sourceChemicals
Singapore
Singapore NEA Postpones Ban Date for Dechlorane Plus, Methoxychlor and UV-328
On May 6, 2024, the National Environment Agency (NEA) of Singapore released a notification of the postponement of the ban date for the manufacture, import and export of Dechlorane Plus, Methoxychlor, and UV-328 to Feb. 26, 2025.
Official sourceChemicals, Sanitation
USA Rhode Island
USA – Rhode Island General Assembly Approves Consumer PFAS Ban Act
On June 26, 2024, the Rhode Island General Assembly approved S 2152/H 7356 Consumer PFAS Ban Act of 2024 to regulate perfluoroalkyl and polyfluoroalkyl substances (PFAS) in several categories of consumer products by Jan. 1, 2029.
Please contact your local UL Solutions office for more information.Chemicals, Sanitation
USA Vermont
USA – Vermont General Assembly Signs Act to Ban PFAS in Certain Consumer Products
On May 30, 2024, the General Assembly of the State of Vermont approved Senate Bill 25 (S.25): An Act Relating to Regulating Consumer Products Containing Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) or Other Chemicals, which amends Senate Bill 20: An Act Relating to Restrictions PFAS and Other Chemicals of Concern in Consumer Products (S.20).Multiple effective dates, beginning July 1, 2024.
Official sourceChemicals, Sanitation
China
China CFSA Solicits Opinions on Two Food Contact Materials
On June 24, 2024, the China National Center for Food Safety Risk Assessment (CFSA) requested public feedback on two food-related materials: a food contact additive with extended using scope and a new food contact resin.
Public comments were open until July 19, 2024.
Official sourceChemicals, Sustainability
Australia
Australia DHAC Publishes Therapeutic Goods and Other Legislation Amendment (Vaping Reforms) Act 2024
On June 27, 2024, the Australia Department of Health and Aged Care (DHAC) published Therapeutic Goods and Other Legislation Amendment (Vaping Reforms) Act 2024. This amendment regulates all vapes in Australia as therapeutic goods and sets a comprehensive framework changing how vapes are imported, manufactured, supplied and advertised. The act has taken effect on July 1, 2024.
Official sourceCyber Security
USA
USA FCC Opens Public Consultation on Implementation of Cybersecurity Labeling for IoT Program
On June 27, 2024, the Federal Communications Commission (FCC) of the United States of America issued a public notice on the Public Safety and Homeland Security Bureau Requests Comment on Implementation of the Cybersecurity Labeling for Internet of Things Program (DA 24-617).
Comments were accepted until Aug. 19, 2024.
Official sourceCyber Security
EU
European Union EC Launches Initiative for Cybersecurity Risk Management and Reporting Obligations for Digital Infrastructure Providers and ICT Service Managers
On June 27, 2024, the European Commission (EC) launched an initiative to establish cybersecurity risk management and reporting obligations for digital infrastructure providers and ICT service managers.
Comments and feedback were accepted until July 25, 2024.
Official sourceCyber Security
Malaysia
Malaysia MCMC Publishes Technical Codes Regarding Security Requirements
On April 4, 2024, the Malaysian Communications and Multimedia Commission (MCMC) published the following technical codes:
- Internet of Things – Device Security Requirements (MCMC MTSFB TC G045:2024)
- Internet Protocol Version 6 – Security Requirements (MCMC MTSFB TC G046:2024)
- Information and Network Security – Requirements (Second Revision) (MCMC MTSFB TC G009:2024)
- Information and Network Security – Incident Management (First Revision) (MCMC MTSFB TC G015:2024)
Official sourceCyber Security
EU
EU ENISA Announces Public Consultation Specifications for eUICC (Embedded Universal Integrated Circuit Card) Certification Under the EUCC Scheme
On June 26, 2024, the European Union Agency for Cybersecurity (ENISA) announced a public consultation to establish a certification for the embedded Universal Integrated Circuit Card (eUICC) under the EUCC scheme. The certification scheme is intended to strengthen the trust of the end users and service providers.
The consultation was open for contributions until Aug. 26, 2024.
Official sourceCyber Security, Wireless
France
France ANFR Starts Monitoring Mandatory Parental Control on All Connected Devices
Starting July 13, 2024, the National Frequency Agency (ANFR) of France started to monitor compliance to the mandatory parental control requirement on all internet-connected devices. This is in compliance with the enforcement of Law No. 2022-300 of March 2, 2022, which state that all new internet-connected devices are required to have a pre-installed parental control system integrated into the device free of charge.
Official sourceRoHS, Chemicals
China
China Adds Four Phthalates to the List of Restricted Substances Under RoHS
On June 29,24, the Standardization Administration under the State Administration for Market Regulation (SAMR) of the People’s Republic of China published an amendment to the China RoHS standard GB/T 26572-2011 Requirements of Concentration Limits for Certain Restricted Substances in Electrical and
Electronic Products. This amendment will take effect on Jan. 1, 2026.
Official sourceElectrical and Electronic Waste
China
China EPR Alliance Publishes White Paper on Domestic WEEE Industry 2023
On May 16, 2024, the Extended Producer Responsibility (EPR) Technology and Innovation Alliance China, a non-profit organization, published a White Paper 2023 on WEEE Recycling Industry in China, which outlines the latest policies and standards, development trends of WEEE industry, waste and recycling statistics, as well as the results and environmental benefits of EPR implementation.
Official sourceElectrical and Electronic Waste
South Africa
South Africa DFFE Consults on Draft National Policy for the Management of Waste Electrical and Electronic Equipment (WEEE)
On June 19, 2024, the Department of Forestry, Fisheries and the Environment (DFFE) published National Environmental Management: Waste Act 59 of 2008 (NEMWA): Consultation on Draft National Policy for the Management of Waste Electrical and Electronic Equipment.
Members of the public were invited to submit written comments and inputs until July 19, 2024.
Official sourceElectrical and Electronic Waste
Hong Kong
Hong Kong EPD Implements Enhanced Producer Responsibility Scheme on Waste Electrical and Electronic Equipment
On June 25, 2024, the Environmental Protection Department (EPD) of Hong Kong issued a press release on Enhanced Producer Responsibility Scheme on Waste Electrical and Electronic Equipment, which was implemented on July 1, 2024.
Official sourceElectrical and Electronic Waste
Moldova
Moldova Ministry of the Environment Invites Economic Agents to Contribute for the Adjustment of the Regulation on Electrical and Electronic Equipment Waste
On July 26, 2024, the Ministry of the Environment invited economic agents to contribute for the adjustment of the regulation on electrical and electronic equipment waste.
Official sourceElectrical and Electronic Waste, Sustainability
China
China CHEAA Consults on Draft Voluntary Association Standard – Technical Specifications for the Use of Recycled Plastics in Household Appliances
On May 8, 2024, the China Household Electrical Appliances Association (CHEAA) requested feedback on its voluntary association standard Technical Specifications for the Use of Recycled Plastics in Household Appliances. The draft standard encourages home appliance manufacturers to use recycled plastics appropriately, outlining requirements for material sources, restricted substances, performance, proportion calculation method, quality control and labeling, with target proportions in listed products. The deadline for comments was June 8, 2024.
Official sourceEMC
South Korea
South Korea RRA Releases Notification About Changes to the Products Subject to Conformity Assessment
On June 21, 2024, the South Korean National Radio Research Agency (RRA) issued a notification about changes to equipment subject to conformity assessment based on the amendment to Notice on Conformity Assessment of Broadcasting and Communication Equipment, etc. (National Radio Research Agency Notice No. 2023-24), which took effect on June 30, 2024.
Official sourceEMC
Taiwan
Taiwan BSMI Publishes the Updated List of Recognized EMC Testing Laboratories in Foreign Countries (June 24, 2024, Update)
On June 24, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) published the List of EMC Testing Laboratories Recognized by the BSMI in Foreign Countries to update the list to the latest version.
Official sourceEMC
Global
IEC Publishes New Standard CISPR 15:2018/AMD1:2024 – Limits and Methods of Measurement of Radio Disturbance Characteristics of Electrical Lighting and Similar Equipment
On July 8, 2024, the International Electrotechnical Commission (IEC) released CISPR 15:2018/AMD1:2024. This standard deals with limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.
Official sourceEMC
China
China SAC/SAMR Releases Revised Mandatory National Standard of EMC for Household Appliances, Electric Tools and Similar Apparatus (GB 4343.1-2024)
On May 28, 2024, the National Standardization Administration of China (SAC) of the State Administration for Market Regulation (SAMR) announced the approval of the release of six mandatory national standards and three modified mandatory national standards (SAC Announcement No. 10, 2024). It includes the Electromagnetic Compatibility Emission Requirements for Household Appliances, Electric Tools and Similar Apparatus, GB 4343.1, which is the applicable standard and certification basis for CCC and CQC scheme.
Official sourceEMC
Serbia
Serbia ME Publishes the New Lists of Serbian Standards for Electromagnetic Compatibility (2024 Update)
On June 21, 2024, the Ministry of Economy (ME) published the list of Serbian standards in the field of electromagnetic compatibility (EMC) in the Official Gazette of the Republic of Serbia No. 55/2024, page 34. This list adopts harmonized standards from the reference list of European harmonized standards.
Official sourceEMC, Performance, Safety
India
India TEC Releases Standard for Generic Requirements of Hybrid (AC + DC) Uninterrupted Power Supply System
On June 21, 2024, the Telecommunications Centre (TEC) of India released the standard document for Generic Requirements TEC 66160:2024, Hybrid (AC + DC) Uninterrupted Power Supply (UPS) System, which was effective on the same day. The document specifies functional, operational, safety, EMC and other requirements for hybrid (AC + DC) uninterrupted power supply (UPS) system.
Official sourceEMC, Performance, Safety
Global, CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 28 (2024-W28)
On July 12, 2024, new TRFs were published and added on the IECEE website.
Official sourceEMC, Performance, Safety, Wireless
India
India TEC Issues Notification for Exemption for Various Parameters or Interfaces of ERs Under MTCTE
On July 1, 2024, the Telecommunications Centre (TEC) of India released Notification No. 5-5/2024-TC/TEC Exemption pertaining to various parameters/Interfaces of essential requirements (ERs) under Mandatory Testing and Certification of Telecommunication Equipment (MTCTE). Submission of test reports for a list of test parameters/ Interfaces pertaining to various ERs under MTCTE has been extended until Dec. 31, 2024.
Official sourceEMC, Performance, Safety, Wireless
India
India TEC Releases Standard for Generic Requirements of Open Radio Access Network (O-RAN)
On June 26, 2024, the Telecommunications Centre (TEC) of India released the standard document for Generic Requirements TEC 21110:2024 – Open-Radio Access Network (O-RAN), which was effective on the same day. The document specifies technical requirements, general requirements, features and functionality of the O-RAN for mobile communication system.
Official sourceEMC, Safety
Morocco
Morocco MoIT Releases Notification Decree for Safety of Gas-Operated Devices and Equipment
On July 3, 2024, the Ministry of Industry and Trade (MoIT) released a notification to inform economic operators for the publication of Resolution No. 1616.22 relating to the safety of gas-operated devices and equipment. It is set to take effect on Dec. 20, 2024.
Please contact your local UL Solutions office for more information.EMC, Safety
Israel
Israel MEI Prepares Draft Import and Export Ru les (Provision of Information) 5774-2024
On July 9, 2024, the Ministry of Economy and Industry (MEI) prepared a draft import and export rules (provision of information) 5774-2024, which aims to change the procedure for imported goods standardization, in relation to the amended Import and Export Ordinance implemented on July 1, 2024.
The closing date for comments was July 14, 2024.
Official sourceEMC, Safety
Israel
Israel MEI Publishes Guidelines and Instructions for Import of Goods to Which an Official Standard Applies
On July 1, 2024, the Ministry of Economy and Industry (MEI) published guidelines and instructions of the commissioner for standardization regarding the import of goods to which an official standard applies.
The effective date date was July 1, 2024.
Official sourceEMC, Safety
GCC
GCC Countries GSO Sends a Reminder to Comply With Updated Requirements on Recognition of Test Reports for G-Mark Certification
On July 27, 2024, the GCC Standardization Organization (GSO) sent a notification to all notified bodies reminding them that the deadline to comply with the updated requirements for the acceptance of test reports and product identity declarations to comply with the G-Mark scheme was July 30, 2024.
Please contact your local UL Solutions office for more information.EMC, Wireless
South Korea
South Korea RRA Publishes Partial Revision of Conformity Assessment of Broadcasting and Communication Equipment
On July 24, 2024, the South Korean National Radio Research Agency (RRA) published the partial revision of Notice on Conformity Assessment of Broadcasting and Communication Equipment, etc., under National Radio Research Agency Notice No. 2024-12.
Official sourceEnergy Efficiency
Costa Rica
Costa Rica MINAE Publishes Equivalence Process With RTCR 503
On May 25, 2024, the Ministry of Environment and Energy (MINAE) published the equivalence process with RTCR 503. This technical regulation deals with electrical products, stoves, templates, countertops, induction templates and electric ovens for domestic use.
Official sourceEnergy Efficiency
Canada
Canada NRCan Publishes Regulations Amending the Energy Efficiency Regulations, 2016 (Amendment 18)
On June 22, 2024, the Natural Resources Canada (NRCan) published regulations amending the energy efficiency regulations, 2016 (Amendment 18).
The public had a 70-day period to provide comments on the proposed amendment, which has implications for international trade, which started from its publication in the Canada Gazette. Consultation and ended on Sept. 1, 2024.
Official sourceEnergy Efficiency
Global
ISO Publishes New Standard to Determine the Fan Energy Index (ISO 12759-6:2024)
On May 22, 2024, the International Organization for Standardization (ISO) published ISO 12759-6:2024 Fans – Efficiency Classification for Fans – Part 6: Calculation of the Fan Energy Index. This standard evaluates fans at every duty point within its stated performance range, rather than peak efficiency value. This addresses the design and selection of fans for reduced power consumption.
Official sourceEnergy Efficiency
USA
USA EPA Releases Public Notice for the Energy Star Product Specification for Computers – Draft 2, Version 9.0
On May 6, 2024, the U.S. Environmental Protection Agency (EPA) released a public comment on the enclosed Draft 2, Version 9.0 ENERGY STAR Computers specification. The EPA will host a stakeholder webinar to discuss the Draft 2 specification in more detail.
Comments on this draft proposal were accepted until June 4, 2024.
Official sourceEnergy Efficiency
Uruguay
Uruguay MIEM Announces LED Lamps and Tubes Incorporation to the Energy Efficiency Labeling Regulation
On July 9, 2024, the Ministry of Industry, Energy and Mining announced the implementation of energy efficiency labeling for LED lamps and tubes.
Implementation will be carried out in three phases, starting on July 5, 2025.
Official sourceEnergy Efficiency
Vietnam
Vietnam MOST Publishes Ministerial Decision on the Implementation of Energy Efficiency Standards of Various Household Electrical Appliances
On April 10, 2024, the Ministry of Science and Technology (MOST) published Ministerial Decision No. 614/QD-BKHCN on the Implementation of Energy Efficiency Standards of various household electrical appliances. The standards specify the energy efficiency levels and the method for determining the energy efficiency of various household electrical appliances.
Official sourceEnergy Efficiency
Philippines
Philippines DOE-EUMB Publishes Implementing Guidelines on Philippines Energy Labeling Program for Television Sets 2024, First Edition
On June 5, 2024, the Department of Energy – Energy Utilization Management Bureau (DOE-EUMB) published an implementing guidelines on energy labeling program for television sets. This guideline provides the requirements for mandatory energy labeling and specifies Minimum Energy Performance (MEP), Energy Efficiency Performance Rating (EEPR) for television sets.
Official sourceEnergy Efficiency
Philippines
Philippines DOE-EUMB Publishes Implementing Guidelines on Philippine Energy Labeling Program for Display Monitors 2024, First Edition
On June 5, 2024, the Department of Energy – Energy Utilization Management Bureau (DOE-EUMB) published draft implementing guidelines on energy labeling program for display monitors. This implementing guidelines provides requirements for display monitors operating in AC or combination of AC and DC sources including minimum energy performance, code of practice on energy labeling of products, specifications and dimensions of energy label, testing and other relevant information.
Official sourceEnergy Efficiency
USA
USA EPA Releases Public Notice for the Final Draft Energy Star Version 6.0 Dehumidifier Specification
On July 11, 2024, the U.S. Environmental Protection Agency (EPA) published the final draft energy star Version 6.0 dehumidifier specification.
Comments were accepted until July 25, 2024. The EPA planned to finalize this version 6.0 dehumidifier specification in August, with an effective date of June 2, 2025.
Official sourceEnergy Efficiency
Philippines
Philippines DOE-EUMB Publishes Implementing Guidelines on Philippine Energy Labeling Program for Air Conditioners 2024, First Edition
On June 5, 2024, the Department of Energy – Energy Utilization Management Bureau (DOE-EUMB) published an implementing guidelines on energy labeling program for air conditioners. This implementing guidelines provides requirements for air conditioners including minimum energy performance, code of practice on energy labeling of products, Energy Efficiency Performance Rating (EEPR), specifications and dimensions of energy label, testing and other relevant information.
Official sourceEnergy Efficiency
Taiwan
Taiwan EA Reminds the Manufacturers Using Energy Labels on Filling the Production/Sales Volume of Certified Models Quarterly Report
On July 8, 2024, the Energy Administration (EA) issued a notice on the Energy Label website reminding the manufacturers using energy labels to visit the Energy Label Online Application System to check whether they have completed the quarterly report for sales filing to avoid termination of using label.
Official sourceEnergy Efficiency
USA
USA EPA Releases Public Notice on the ENERGY STAR Most Efficient 2024
On July 9, 2024, the U.S. Environmental Protection Agency (EPA) published a public notice regarding the update on ENERGY STAR Most Efficient 2024 and proposed recognition criteria for 2025.
The EPA requested public input on these criteria until Aug. 12, 2024.
Official sourceEnergy Efficiency
Philippines
Philippines DOE-EUMB Publishes Implementing Guidelines on Philippine Energy Labeling Program for Refrigerating Appliances 2024, First Edition
On June 5, 2024, the Department of Energy – Energy Utilization Management Bureau (DOE-EUMB) published an implementing guidelines on energy labeling program for refrigerating appliances. This guideline provides the requirements for mandatory energy labeling and specifies Minimum Energy Performance (MEP), Energy Efficiency Performance Rating (EEPR) for refrigerators and refrigerators-freezers.
Official sourceEnergy Efficiency
Philippines
Philippines DOE-EUMB Publishes Implementing Guidelines on Philippine Energy Labeling Program for Lighting Products 2024, First Edition
On June 5, 2024, the Department of Energy – Energy Utilization Management Bureau (DOE-EUMB) published a draft implementing guidelines on energy labeling program for lighting products. This guideline provides the requirements for mandatory energy labeling of lighting products and specifies Minimum Energy Performance (MEP), Energy Efficiency Performance Rating (EEPR) for Compact fluorescent lamps (CFL), linear fluorescent lamps (LFL) or dark field light (DFL), sequential flashing lights (SFL), and light-emitting diode (LED).
Official sourceEnergy Efficiency
Israel
Israel MoE Announces Approval of Import Reform of Electrical Products
On July 16, 2024, the Ministry of Energy (MoE) announced the approval of the reform of importing electrical products, making the Ministry of Energy and Infrastructure the first ministry to open the market to products from Europe.
Official sourceEnergy Efficiency
China
China CNIS Publishes Draft of Four Energy Efficiency Mandatory National Standards for Energy-Using Products, Including Gas Cooking Appliances
On July 2, 2024, the China National Institute of Standardization (CNIS) published four mandatory national standards related to the minimum allowable values of energy efficiency and energy efficiency grades of gas cooking appliances, microcomputers, AC-DC and AC-AC power supplies, and centrifugal pumps.
Relevant personnel were able to review the draft and provide comments and revision opinions by Aug. 27, 2024.
- Gas cooking appliances contact: He Yuan, 010-58811497, heyuan@cnis.ac.cn
- Computer and external power supply contact: Zhang Sinan, 010-58811633, zhangsn@cnis.ac.cn
- Centrifugal pump contact: Ding Qing, 010-58811740, dingqing@cnis.ac.cn
Official sourceEnergy Efficiency
Philippines
Philippines DOE Publishes Amendments to the Philippine Energy Labeling Program (PELP) Guidelines
On May 31, 2024, the Department of Energy (DOE) published Department Circular No. DC2024-05-0017. This Department Circular prescribes amendments to Department Circular No. DC2020-06-0015 or the Philippine Energy Labeling Program (PELP) Guidelines.
Official sourceEnergy Efficiency
Philippines
Philippines DOE Publishes Amendments to the Minimum Energy Performance for Products (MEPP) Guidelines
On May 31, 2024, the Department of Energy (DOE) published Department Circular No. DC2024-05-0016. The Department Circular prescribes amendments to the Minimum Energy Performance for Products (MEPP) Guidelines.
Official sourceEnergy Efficiency
Taiwan
Taiwan MOEA Issues Draft Amendment to the Energy Efficiency Rating Labeling Requirements of Gas Stoves Products
On July 10, 2024, the Ministry of Economic Affairs (MOEA) issued the draft amendment to Paragraph 11 and Appendix 3 of Paragraph 3 and Illustration 1 of Paragraph 5 of Requirements on Labeling and Inspection of Energy Consumption and Energy Efficiency Rating for Gas Stoves Products. The deadline to submit comments on the draft amendment of the energy efficiency regulation for gas stove products was July 24, 2024.
Official sourceEnergy Efficiency
Taiwan
Taiwan MOEA Issues Draft Amendment to the Energy Efficiency Rating Labeling Requirements of Instantaneous Gas Heater Products
On July 10, 2024, the Ministry of Economic Affairs (MOEA) issued the draft amendment to Paragraph 11 and Appendix 3 of Paragraph 3 and Illustration 1 of Paragraph 5 of Requirements on Labeling and Inspection of Energy Consumption and Energy Efficiency Rating for Instantaneous Gas Heaters Products. The deadline to submit comments on the draft amendment of the energy efficiency regulation for instantaneous gas heater products was July 24, 2024.
Official sourceEnergy Efficiency
EU
European Union EC Publishes Commission Notice on Application of Energy Labelling Requirements
On July 19, 2024, the European Commission (EC) published Commission Notice on the Application of Energy Labelling Requirements in the Light of the Court Order of 5 October 2023 in Case C-761/22.
The notice is about interpretation of Article 6, first paragraph, point (a), of Regulation (EU) 2017/1369 and the requirement to make reference to the energy efficiency class and range of the efficiency classes in the visual advertisements or technical promotional materials.
The EC will take adjustment time into consideration during infringement proceedings; obligations may not be enforced for up to six months (Jan. 19, 2025) following the notice in the Official Journal, and for up to 12 months in the case of previously printed materials.
Official sourceEnergy Efficiency
USA
USA DOE Publishes Proposed Rules for the Energy Conservation Standards for Consumer Water Heaters
On July 23, 2024, the U.S. Department of Energy published proposed rules for the energy conservation standards for consumer water heaters.
DOE accepted comments, data and information regarding this NODA until Aug. 22, 2024.
Official sourceEnergy Efficiency
Australia
Australia ECMC Agrees to Multiple Recommendations on Improving Energy Efficiency Standards for Appliances
On July 19, 2024, the Energy and Climate Change Ministerial Council (ECMC) agreed to multiple recommendations put forward to them by the Department of Climate Change, Energy, the Environment and Water and supported by the Equipment Energy Efficiency (E3) Program.
Official sourceEnergy Efficiency
Bahrain
Bahrain MoIC Prepares Draft Technical Regulation for Energy Performance, Testing and Labeling Requirements of Electric Clothes Dryer
On July 26, 2024, the Ministry of Industry and Commerce (MoIC) prepared draft Technical Regulation for Energy Performance, Testing and Labeling Requirements of electrical clothes dryer. This regulation specifies the Minimum Energy Performance Standard (MEPS) and testing requirements of clothes dryers
with capacity up to 25 kg that operate in AC single-phase of 230 V with a frequency of 50 Hz, according to GSO 1899.
The deadline for comments is Sept. 24, 2024.
Official sourceEnergy Efficiency, Explosive Atmospheres, RoHS, Safety, Chemicals
United Arab Emirates
UAE MoIAT Announces Access to Ministry's Digital Services Will Only Be Through UAE Pass and Local Login Access Will Be Discontinued
On July 22, 2024, the Ministry of Industry and Advanced Technology (MoIAT) announced that the local login, username and password will be discontinued, and access to MOIAT e-services website to use the Ministry's digital services will only be through UAE Pass.
Please contact your local UL Solutions office for more information.Energy Efficiency, Performance
India
India BIS Releases Draft Revised Standard IS 15999 Part 2-1:2023 Rotating Electrical Machines-Standard Methods for Determining Losses and Efficiency From Tests Excluding Machines for Traction Vehicles
On July 9, 2024, the Bureau of Indian Standards (BIS) released draft standard for IS 15999: Part 2: Sec 1: 2023 Rotating Electrical Machines – Part 2-1: Standard Methods for Determining Losses and Efficiency From Tests (Excluding Machines for Traction Vehicles) (Second Revision) in order to to align with the latest version of IEC 60034-2-1:2024.
Comments and feedback were accepted until Aug. 8, 2024.
Official sourceEnergy Efficiency, Performance
India
India BIS Releases Draft Revised Standard IS 15999: Part 1: 2021 for Rotating Electrical Machines Part 1: Rating and Performance
On July 18, 2024, the Bureau of Indian Standards (BIS) released draft standard IS 15999: Part 1: 2021 Rotating Electrical Machines – Part 1: Rating and Performance (Third Revision) to align it with the latest version of IEC 60034-1:2022.
Comments and feedback were accepted until Aug. 17, 2024.
Official source, Official sourceEnergy Efficiency, Performance
Serbia
Serbia MoME Publishes New Lists of Serbian Standards for Eco-Design for Household Washing Machines and Household Washing and Drying Machines (58/2024-107)
On July 5, 2024, the Ministry of Mining and Energy (MoME) published the list of Serbian standards in the field of eco-design for household washing machines and household washing and drying machines in the Official Gazette of the Republic of Serbia No. 58/2024, page 107. This list adopts harmonized standards from the reference list of European harmonized standards for household washing machines and household washer-dryers published in the Official Journal of the European Union.
Official sourceEnergy Efficiency, Performance
Serbia
Serbia MoME Publishes Eco-Design Requirements for Local Space Heaters (47/2024-12)
On May 24, 2024, the Ministry of Mining and Energy (MoME) published a rulebook on eco-design requirements for local space heaters in the Official Gazette of the Republic of Serbia No. 47/2024, page 12. This regulation entered into force on June 1, 2024, and shall apply from June 1, 2025.
Official sourceEnergy Efficiency, Performance
Bangladesh
Bangladesh MOI Publishes Energy Efficiency Standards for Household Refrigerating Appliances
On July 3, 2024, the Ministry of Industries (MOI) published energy efficiency standards for household refrigerating appliances. These standards specify the essential characteristics of household and similar refrigerating appliances including Energy labeling, general and performance requirements, energy consumption and volume, and other compliance criteria.
Official sourceEnergy Efficiency, Performance, Sustainability
EU
European Union EC Publishes Initiative Regarding Energy Efficiency – Ecodesign Requirements for Air Heating and Cooling Products
On June 21, 2024, the European Commission (EC) published an initiative regarding the revision of Energy Efficiency – Ecodesign Requirements for Air Heating and Cooling Products.
Comments and feedback were accepted until Aug. 31, 2024.
Official sourceEnergy Efficiency, Performance, Sustainability
EU
European Union EC Publishes Commission Regulation Regarding Ecodesign Requirements for Fans Driven Motors – Electric Input Power of 125 W to 500 kW
On July 4, 2024, the European Commission (EC) published Commission Regulation (EU) 2024/1834 of 3 July 2024 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for fans driven by motors with an electric input power between 125 W and 500 kW and repealing Commission Regulation (EU) No 327/2011.
This regulation entered into force on the 20th day (July 24, 2024) following that of its publication in the Official Journal of the European Union.
Official sourceEnergy Efficiency, Safety, Performance
Taiwan
Taiwan BSMI Issues Revised PV Taiwan Plus Technical Specification (July 2024 Edition) for Voluntary Product Certification (VPC)
On July 1, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) of the Ministry of Economic Affairs (MOEA) released a notification for the revision of PV Taiwan Plus Technical Specification (July 2024 Edition) for Voluntary Product Certification (VPC), which was issued on June 28, 2024. The revised version includes new benchmark values for newly added PV (photovoltaic) module types, reflecting the latest industry developments.
Official sourceExplosive Atmospheres
Australia, New Zealand
Australia and New Zealand Publish AS/NZS IEC 60079.11:2024 – Equipment Protection by Intrinsic Safety "i"
On June 28, 2024, Standards Australia and New Zealand published AS/NZS IEC 60079.11:2024. This standard specifies the construction and testing of intrinsically safe apparatus intended for use in explosive atmospheres and for associated apparatus that is intended for connection to intrinsically safe circuits that enter such atmospheres.
Official sourceExplosive Atmospheres, Performance
Global
ISO and IEC Publish New Standard for Flame Arrester Use in Explosive Atmospheres (ISO/IEC 80079-49:2024)
On May 7, 2024, the International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC) published ISO/IEC 80079-49:2024 Explosive Atmospheres – Part 49: Flame Arresters – Performance Requirements, Test Methods and Limits for Use.
Official sourceExplosive Atmospheres, Safety
Vietnam
Vietnam MOIT Prepares Draft Technical Regulation on Safety of Explosion-Proof Luminaires
On June 17, 2024, the Ministry of Trade and Industry (MOIT) prepared a draft technical regulation on the safety of explosion-proof luminaires. This technical regulation stipulates the technical safety and management requirements for explosion-proof lighting lamps with voltage up to 220 V used in underground mines with flammable, explosive gases and explosive dust.
The closing date for comments was Aug. 16, 2024.
Official sourceF Gas, Chemicals
Australia
Australia DCCEEW Publishes Draft Consultation for Reducing the Climate Impact of Refrigerants in the Commercial and Industrial Refrigeration Sector
On June 27, 2024, the Australia Department of Climate Change, Energy, the Environment and Water (DCCEEW) published draft consultation on reducing the use of high-GWP refrigerants in the commercial and industrial refrigeration sector. Options include limiting the import and manufacture of new commercial refrigeration equipment using high-GWP refrigerants, limiting custom-built equipment assembly, and limiting R404A import and use.
The consultation period was until Aug. 8, 2024
Official sourceF Gas, Chemicals
Australia
Australia DCCEEW Amends Regulation Restricting Import of Certain Small Air-Conditioning Equipment
On June 21, 2024, the Australia Department of Climate Change, Energy, the Environment and Water (DCCEEW) published an amendment to the Ozone Protection and Synthetic Greenhouse Gas Management Regulations 1995 implementing restrictions on the import of certain small air-conditioning equipment.
Australia banned the import of small air-conditioning equipment using refrigerant with a global warming potential (GWP) over 750 starting July 1, 2024.
Official sourceF Gas, Chemicals
Macedonia
Macedonia MOEPP Publishes Amendment to Guidelines for More Detailed Conditions on Limitation of the Import of Hydrofluorocarbons (HFC) in 2024
On June 6, 2024, the Macedonia Ministry of Environment and Physical Planning (MOEPP) through its Department of Spatial Planning published a guidance document amending the Guidelines for More Detailed Conditions on Limitation of the Import of Fluorinated Hydrocarbons (HFC) in 2024.
The guidelines entered into force the day after they were signed and published on the government website, which was June 7, 2024.
Official sourceF Gas, Chemicals
USA
USA EPA Publishes Proposed Rule on Phasedown of Hydrofluorocarbons: Restrictions on the Use of HFCs Under the AIM Act in Variable Refrigerant Flow Air
On June 26, 2024, the Environmental Protection Agency (EPA) published a proposed rule entitled Phasedown of Hydrofluorocarbons: Restrictions on the Use of HFCs Under the AIM Act in Variable Refrigerant Flow Air Conditioning Subsector. This action allows one additional year, until Jan. 1, 2027, to mitigate the potential for significant stranded inventory in this subsector.
The deadline for comments was July 26, 2024.
Official sourceF Gas, Chemicals
Indonesia
Indonesia Ministry of Environment and Forestry Publishes Regulation on Import Approval of ODS and HFCs
On May 16, 2024, the Indonesia Ministry of Environment and Forestry published Regulation No. 7/2024 on Procedures for Issuing Recommendations on Import Approval of Ozone Depleting Substances and Hydrofluorocarbons. This regulation specifies comprehensive import procedures for ozone-depleting substances (ODS) and hydrofluorocarbons (HFCs). It also establishes consumption-reduction targets for ODS in Annex II and HFCs in Annex IV.
This regulation entered into force on the same date of publication, which was May 16, 2024.
Official sourceF Gas, Chemicals
Japan
Japan METI Proposes Amendment on the Rational Use and Proper Management of Fluorocarbons
On July 8, 2024, the Ministry of Economy, Trade and Industry (METI) of Japan issued the draft of Revision of the Ministerial Ordinance and Notifications under the Act on the Rational Use and Proper Management of Fluorocarbons through the World Trade Organization (WTO) website.
The final date for comments is Sept. 6, 2024.
Official sourceF-Gas, Chemicals
China
China MEE Solicits Comments on the Draft National Implementation Plan (2024-2030) of the Montreal Protocol on Substances That Deplete the Ozone Layer
On June 29, 2024, the Ministry of Ecology and Environment (MEE) of the People’s Republic of China solicited comments for the draft National Implementation Plan (2024-2030) of the Montreal Protocol on Substances That Deplete the Ozone Layer.
The deadline for comments was July 22, 2024.
Official sourceSanitation
Georgia
Georgian Government Publishes Technical Regulation on Regenerated Cellulose Film Intended for Food Contact Purposes
On April 4, 2024, the Government of Georgia published Resolution No. 124 April 3, 2024 Technical Regulation – Materials and Products From Regenerated Cellulose Film Intended for Food Contact Approval.
Official sourceNoise, Safety, Performance
Peru
Peru INACAL Publishes Various Draft Technical Peruvian Standards
On July 11, 2024, the National Institute of Quality (INACAL) published various draft Peruvian standards:
- PNTP-IEC 60034-7:2024 – Rotating Electric Machines. Part 7: Classification of Construction Types, Mounting Arrangements and Terminal Box Position (IM Code)
- PNTP-IEC 60598-2-22:2024 – Luminaires. Part 2-22: Particular Requirements Luminaires for Emergency Lighting
- PNTP-IEC 60704-2-16:2024 – Household Appliances and Analogues. Test Code for the Determination of Airborne Acoustic Noise. Part 2-16: Particular Requirements for Washer-Dryers
These draft technical standards and/or related texts will be available to the interested public for consultation until Sept. 9, 2024.
Comments must be submitted using the virtual platform: Sala de Lectura Virtual (inacal.gob.pe).
Official sourcePerformance
EU
European Union CENELEC Publishes New Standard EN IEC 62896:2024 – Hybrid Insulators for AC And DC for High-Voltage Applications
On June 28, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 62896:2024 – Hybrid Insulators for AC and DC for High-Voltage Applications Greater Than 1 000 V AC and 1 500 V DC – Definitions, Test Methods and Acceptance Criteria.
Official sourcePerformance
EU
European Union CENELEC Publishes New Standard EN IEC 61754-13:2024 – Fiber Optic – Type FC-PC Connector Family
On June 28, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 61754-13:2024 – Fiber Optic Interconnecting Devices and Passive Components – Fiber Optic Connector Interfaces – Part 13: Type FC-PC Connector Family.
The date of withdrawal of superseded version is June 17, 2025.
Official sourcePerformance
Global
IEC Publishes New Standard IEC 61196-1-105:2024 – Electrical Test Methods Measuring Withstand Voltage for Cable Dielectric
On June 19, 2024, the International Electrotechnical Commission (IEC) released IEC 61196-1-105:2024. This standard specifies the electrical test method for measuring the withstand voltage of the cable dielectric in coaxial communication cables.
Official sourcePerformance
Global
IEC Publishes New Standard IEC 61300-2-22:2024 – Testing and Measurement Procedures of Fiber Optic Interconnecting Devices and Passive Components
On June 20, 2024, the International Electrotechnical Commission (IEC) released IEC 61300-2-22:2024. This standard focuses on the testing and measurement procedures for fiber optic interconnecting devices and passive components; specifically, it deals with the tests related to the change of temperature.
Official sourcePerformance
Global
ISO Publishes Second Edition of the Standard to Determine the Performance Characteristics of Air to Water Heat Pumps for Space Heating and/or Space Cooling (ISO 19967-2:2024)
On May 31, 2024, the International Organization for Standardization (ISO) published ISO 19967-2:2024 Air to Water Heat Pumps – Testing and Rating for Performance – Part 2: Space Heating and/or Space Cooling. The purpose of this standard is to rate the performance of the air to water heat pumps for space heating and/or space cooling.
Official sourcePerformance
Global
IEC Publishes New Standard IEC 60269-2:2013/AMD2:2024 – Supplementary Requirements for Low-Voltage Fuses
On June 19, 2024, the International Electrotechnical Commission (IEC) released IEC 60269-2:2013/AMD2:2024. This standard that provides supplementary requirements for low-voltage fuses used by authorized persons, mainly for industrial applications.
Official sourcePerformance
EU
European Union CENELEC Publishes New Standard EN IEC 61300-2-34:2024 – Fiber Optic Interconnecting Devices and Passive Components – Resistance to Solvents and Contaminating Fluids
On July 5, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61300-2-34:2024, Fiber Optic Interconnecting Devices and Passive Components – Basic Test and Measurement Procedures – Part 2-34: Tests – Resistance to Solvents and Contaminating Fluids.
The date of withdrawal of superseded version is June 28, 2025.
Official sourcePerformance
EU
European Union CENELEC Publishes New Standard EN IEC 60794-1-209:2024 – Optical Fiber Cables – Environmental Test Methods – Ageing, Method F9
On July 5, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60794-1-209:2024 – Optical Fiber Cables – Part 1-209: Generic Specification – Basic Optical Cable Test Procedures – Environmental Test Methods – Ageing, Method F9.
The date of withdrawal of superseded version is July 4, 2027.
Official sourcePerformance
EU
European Union CENELEC Publishes New Standard EN IEC 60794-1-201:2024 – Optical Fiber Cables – Environmental Test Methods – Temperature Cycling, Method F1
On July 5, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60794-1-201:2024 – Optical Fiber Cables – Part 1-201: Generic Specification – Basic Optical Cable Test Procedures – Environmental Test Methods – Temperature Cycling, Method F1.
The date of withdrawal of superseded version is July 4, 2027.
Official sourcePerformance
Global
IEC Publishes New Standard IEC 60287-2-3:2024 – Method for Calculating the Current Rating Factor for Cables
On June 28, 2024, the International Electrotechnical Commission (IEC) released IEC 60287-2-3:2024. This standard provides a method for calculating the continuous current rating factor for cables of all voltages installed in ventilated tunnels.
Official sourcePerformance
EU
European Union CENELEC Publishes Amended Standard EN IEC 60317-27-2:2020/A1:2024 – Paper Tape Covered Round Aluminium Wire
On July 5, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60317-27-2:2020/A1:2024 – Specifications for Particular Types of Winding Wires – Paper Tape Covered Round Aluminium Wire.
Official sourcePerformance
EU
European Union CENELEC Publishes Amended Standard EN IEC 60317-12:2020/A1:2024 – Polyvinyl Acetal Enamelled Round Copper Wire, Class 120
On July 5, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard, EN IEC 60317-12:2020/A1:2024 – Specifications for Particular Types of Winding Wires – Polyvinyl Acetal Enamelled Round Copper Wire, Class 120.
Official sourcePerformance
Global
IEC Publishes New Standard IEC 60793-1-22:2024 – Length Measurement of Optical Fibers
On June 27, 2024, the International Electrotechnical Commission (IEC) released IEC 60793-1-22:2024. This standard deals with measurement methods and test procedures, specifically length measurement of optical fibers.
Official sourcePerformance
Global
IEC Publishes New Standard IEC 60793-1-46:2024 – Monitoring of Changes in Attenuation of Optical Fibers
On June 27, 2024, the International Electrotechnical Commission (IEC) released IEC 60793-1-46:2024. This standard deals with monitoring of changes in attenuation of fibers and cables for commercial purposes.
Official sourcePerformance, Safety
Global
IECEE Includes New Standards in the System for the Month of June 2024
On June 2024, new standards were included in the IECEE system.
Official sourcePerformance, Safety
Canada
Canada SCC Publishes New Draft Edition of C22.2 NO. 94.2 – Enclosures for Electrical Equipment, Environmental Considerations
On June 11, 2024, the Standards Council of Canada (SCC) published C22.2 No. 94.2. This standard covers additional environmental construction and performance requirements for enclosures for electrical equipment.
Comments were accepted until July 10, 2024.
Official sourcePerformance, Safety
Global, CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 29 (2024-W29)
On July 19, 2024, new TRFs were published and added on the IECEE website.
Official sourceREACH, Chemicals
EU
European Union ECHA Announces Preliminary Conclusions on Four Sectors Potentially Affected by PFAS REACH Restriction Proposal
On June 13, 2024, the European Chemicals Agency announced that the Committees for Risk Assessment (RAC) and Socio-Economic Analysis (SEAC) had reached a preliminary conclusion on four industries that could be affected by the proposal to restrict per- and polyfluoroalkyl substances (PFAS) in the EU under REACH Regulation.
The conclusions agreed at RAC and SEAC meetings are provisional until the committees finish evaluating the whole restriction proposal (covering all sectors of usage) and approve their recommendations. These views will subsequently be shared with the public.
Official sourceRoHS, Safety, Chemicals
Saudi Arabia
Saudi Arabia SASO Updates Conformity Assessment Bodies (CABs) for Mandatory Implementation Date of Applied Standards Regarding Unifying Types of Charging Ports
On July 1, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) updated conformity assessment bodies (CABs) for approved standards specifications regarding unifying the types of ports for smartphone chargers and electronic devices to be Type C only.
Please contact your local UL Solutions office for more information.Safety
India
India BIS Publishes Guidelines for Non-Conformity Products Under Scheme I of BIS (Conformity Assessment) Regulations 2018
On May 13, 2024, the Bureau of Indian Standards (BIS) published guidelines for dealing with non-conformity of products observed during operation of license under Scheme – I of Schedule – II of BIS (Conformity Assessment) Regulations, 2018.
Official sourceSafety
Australia, New Zealand
Australia and New Zealand Publish Standard AS/NZS 60898.1:2024 – Requirements for Circuit-Breakers for AC Operation
On June 7, 2024, Standards Australia and New Zealand published standard AS/NZS 60898.1:2024. This standard applies to AC air-break circuit-breakers for operation at 50 Hz, 60 Hz or 50/60 Hz, having a rated voltage not exceeding 440 V (between phases), a rated current not exceeding 125 A and a rated short-circuit capacity not exceeding 25,000 A.
Official sourceSafety
USA
USA Underwriters Laboratories Develops UL 3202 – Outline of Investigation for Mobile Electric Vehicle Charging Systems Integrated with Energy Storage Systems
On June 5, 2024, UL Standard and Engagement published an article discussing mobile electric vehicle charging systems with integrated energy storage systems, specifically UL 3202, which is the Outline of Investigation for such systems.
Official sourceSafety
Australia, New Zealand
Australia and New Zealand Publish Standard AS/NZS 61730.1:2024 – Safety Requirements for Photovoltaic (PV) Modules
On June 21, 2024, Standards Australia and New Zealand published standard AS/NZS 61730.1:2024. This standard adopts and modifies IEC 61730-1:2023, which specifies and describes the fundamental construction requirements for photovoltaic (PV) modules in order to provide safe electrical and mechanical
operation.
Official sourceSafety
Australia, New Zealand
Australia and New Zealand Prepare Multiple Draft Standards for Household Electrical Appliances
On May 23, 2024, Standards Australia and New Zealand prepared multiple draft standards for public comments. These standards deal with the safety requirements for various household electrical appliances.
The closing date for comments was July 18, 2024.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Edition of C22.2 NO. 60691 – Requirements and Application Guide for Thermal-Links
On June 4, 2024, the Standards Council of Canada (SCC) published C22.2 No. 60691. This standard specifies requirements for thermal-links used in electrical appliances, electronic equipment and component parts.
Comments were accepted until July 3, 2024.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Edition of C22.2 NO. 60335-2-78 – Safety Requirements for Outdoor Barbecues
On June 4, 2024, the Standards Council of Canada (SCC) published C22.2 No. 60335-2-78. This standard specifies safety requirements for outdoor barbecues.
Comments were accepted until July 3, 2024.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Edition of C22.2 NO. 60335-2-52 – Safety Requirements for Oral Hygiene Appliances
On June 4, 2024, the Standards Council of Canada (SCC) published C22.2 No. 60335-2-52. This standard specifies requirements for oral hygiene appliances.
Comments were accepted until July 3, 2024.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Edition of C22.2 NO. 60335-2-44 – Safety Requirements for Ironers
On June 5, 2024, the Standards Council of Canada (SCC) published C22.2 No. 60335-2-44. This standard specifies safety requirements for ironers.
Comments were accepted until July 3, 2024.
Official sourceSafety
EU
European Union EC Publishes Commission Implementing Regulation Regarding Methods for Consumers and Interested Parties to Report Products Posing Health and Safety Risks
On June 24, 2024, the European Commission (EC) published Commission Implementing Regulation (EU) 2024/1740 of 21 June 2024 laying down the rules for the application of Regulation (EU) 2023/988 of the European Parliament and of the Council as regards the modalities for consumers and other interested parties to inform the commission of products that might present a risk to the health and safety of consumers and for the transmission of such information to the national authorities concerned.
This regulation entered into force on the 20th day (July 14, 2024) following that of its publication in the Official Journal of the European Union.
Official sourceSafety
Ecuador
Ecuador INEN Announces Details of Meeting of Technical Committee for Technical Regulation on Transformers
The Ecuadorian Standardization Service (INEN) released the meeting schedule for the Standardization Technical Committee "Transformers" for NTE INEN-IEEE Std C57.12.34, Requirements of the IEEE Standard for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below (IEEE STD C57.12.34TM:2022, RTD).
Official sourceSafety
EU
European Union EC Launches Public Consultation Regarding Mutual Recognition of Goods Within Europen Union Market
On June 20, 2024, the European Commission (EC) launched public consultation regarding mutual recognition of goods.
Comments and feedbacks can be submitted until Sept. 26, 2024.
Official sourceSafety
Saudi Arabia
Saudi Arabia SASO Organizes Workshop Regarding Newly Approved Technical Regulation for General Requirements for Machinery Safety
On July 1, 2024, the Saudi Standards, Quality and Metrology Organization (SASO) organized a workshop regarding newly approved technical regulation for general requirements for machinery safety.
To register for the workshop, use this link.Safety
Canada
Canada SCC Publishes New Draft Standard C22.2 NO. 248.21 – Fuses for the Protection of Batteries and Battery Systems
On June 12, 2024, the Standards Council of Canada (SCC) published C22.2 No. 248.21. This standard deals with fuses for the protection of batteries and battery systems.
Comments were accepted until July 10, 2024.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Edition of CSA E60730-1 – General Requirements of Automatic Electrical Controls
On June 20, 2024, the Standards Council of Canada (SCC) published CSA E60730-1. This standard covers general requirements of automatic electrical controls.
Comments were accepted until July 17, 2024.
Official sourceSafety
Mozambique
Mozambique MIC Publishes the List of Imported Products Subject to Mandatory Conformity Assessment
On May 20, 2024, the Ministry of Industry and Commerce (MIC) published Ministerial Diploma No. 29/2024, which approves the list of imported products whose conformity assessment is mandatory and effective on the same day.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Editions of Various Standards for Power Transformers, Power Supplies and Reactors
On June 11, 2024, the Standards Council of Canada (SCC) published various draft new editions of safety standards for power transformers, power supplies, reactors and similar products:
- CSA IEC 61558-2-1
- CSA IEC 61558-2-2
- CSA IEC 61558-2-4
- CSA IEC 61558-2-6
Comments were accepted until July 10, 2024.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Standards of Various Electric Motor-Operated Hand-Held and Transportable Tools
On June 12 and 20, 2024, the Standards Council of Canada (SCC) published draft new and amendment revisions of various standards for electric motor-operated hand-held tools, transportable tools, and lawn and garden machinery.Designation number
SDO comment period end date
CAN/CSA-C22.2 No. 62841-2-5:16 (R2021)
July 10, 2024
CSA C22.2 No. 62841-4-5:23
July 10, 2024
C22.2 No. 62841-2-7
July 10, 2024
CSA C22.2 No. 62841-2-19
July 17, 2024
CSA C22.2 No. 62841-2-18
July 17, 2024
Safety
China
China MIIT Publishes Public Consultation for 12 Amendment Plan of Mandatory National Standards Including the Safety Requirements of Lithium-Ion Battery for Electric Mopeds and Motorcycles
On June 25, 2024, the Ministry of Industry and Information Technology (MIIT) released a public consultation to collect opinions for planned 12 mandatory national standard, including the amendment standards for safety requirements of lithium-ion batteries for electric mopeds and motorcycles, electric vehicles, and domestic gas cooking appliances.
The public notice period was June 25, 2024-July 24, 2024.
Official sourceSafety
Chile
Chile MTT Modifies Technical, Construction and Safety Requirements for Electric and Hybrid Vehicles
On June 8, 2024, the Ministry of Transport and Telecommunication published the modified Supreme Decree No. 145 of 2017. This decree establishes technical, construction and safety requirements for electric and hybrid vehicles.
Official sourceSafety
Ecuador
Ecuador INEN Opens Public Consultation on Technical Regulations for Low-Voltage Switching Power Supplies
On June 28, 2024, the Ecuadorian Standardization Service (INEN) opened a public consultation on first draft revision project of the Ecuadorian Technical Regulation for low-voltage switch mode power supply PRTE No. 167(1R).
Comments were accepted until Aug. 27, 2024.Safety
Taiwan
Taiwan BSMI Updates the List of Safety Testing Laboratories Recognized by the BSMI in Foreign Countries (May 27, 2024, Update)
On May 27, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) updated the List of Safety Testing Laboratories Recognized by the BSMI in Foreign Countries.
Official sourceSafety
Taiwan
Taiwan BSMI Issues Latest List of Recognized Foreign Quality Management System (QMS) Certification Bodies (CBs) (April 2, 2024, Update)
On April 2, 2024, the Bureau of Standards, Metrology and Inspection (BSMI) updated the List of Foreign Quality Management System (QMS) Certification Bodies (CBs) Recognized by the BSMI. The recognition only applies to those factories or premises in the same country as the certification body.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN IEC 61347-2-1:2024 – Controlgear for Electric Light Sources – Starting Devices
On June 28, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 61347-2-1:2024 – Controlgear for Electric Light Sources – Safety – Part 2-1: Particular Requirements – Starting Devices (Other Than Glow Starters).
The date of withdrawal of superseded version is June 18, 2027.
Official sourceSafety
India
India BIS Releases Notification for the Amendment of IS 17681:2022 Bottled Water Dispensers – Specification
On June 12, 2024, the Bureau of Indian Standards (BIS) released notification ref: HQ-PUB014/2/2020-PUB-BIS (914). This communicates the schedule of the effectivity of IS 17681:2022 Bottled Water Dispensers – Specification Amendment No. 1.
The standard's first amendment is mandatory starting Sept. 6, 2024.
Official sourceSafety
USA
USA Underwriters Laboratories Publishes New Requirements for Use of Low-GWP Refrigerants
On June 5, 2024, UL Standard and Engagement published an article regarding the important new requirements for use of low-GWP refrigerants.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN IEC 60598-2-20:2024 – Luminaires Lighting Chains
On June 28, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard, EN IEC 60598-2-20:2024 – Luminaires – Part 2-20: Particular Requirements – Lighting Chains.
The date of withdrawal of superseded version is June 28, 2027.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN IEC 60598-2-20:2024/A11:2024 – Luminaires Lighting Chains
On June 28, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 60598-2-20:2024/A11:2024 – Luminaires – Part 2-20: Particular Requirements – Lighting Chains.
Official sourceSafety
Chile
Chile SEC Publishes New Draft Protocol for Wood Pellet Heaters With a Power of Less Than or Equal to 25 kW
On June 21, 2024, the Superintendency of Electricity and Fuels (SEC) published draft protocol PC Nº 201: 2024, which establishes the safety testing of wood pellet heaters, with a nominal thermal power less than or equal to 25 kW.
The implementation of this protocol will replace and cancel Protocol PC Nº 201:2023, which was enforced through Exempt Resolution No. 17270.
The final date for comments is Sept. 4, 2024.
Official sourceSafety
Global
IEC Publishes New Standard IEC 62841-2-18:2024 – Safety Requirements for Hand-Held Strapping Tools
On June 21, 2024, the International Electrotechnical Commission (IEC) released IEC 62841-2-18:2024. This standard provides the latest safety requirements for the design and use of electric motor-operated hand-held strapping tools, building upon the general IEC 62841-1 standard for the safe operation of these specialized power tools.
Official sourceSafety
Global
IEC Publishes New Standard IEC 62841-2-23:2024 – Safety Requirements for Hand-Held Die Grinders and Small Rotary Tools
On June 21, 2024, the International Electrotechnical Commission (IEC) released IEC 62841-2-23:2024. This standard provides the latest safety requirements for hand-held die grinders and small rotary tools.
Official sourceSafety
Global
IEC Publishes New Standard IEC 62841-3-3:2024 – Safety Requirements for Transportable Planers and Thicknessers
On June 21, 2024, the International Electrotechnical Commission (IEC) released IEC 62841-3-3:2024. This standard provides the latest safety requirements for transportable planers and thicknessers.
Official sourceSafety
United Arab Emirates
UAE MoIAT Announces Updates on Test Report Requirements for UAE Certification of Universal Type Cord Extension Sets and Socket-outlets
On July 10, 2024, the Ministry of Industry and Advanced Technology (MoIAT) recently made an important announcement regarding updates on ECAS/EQM LVE certification for universal type cord extension sets and socket-outlets.
According to the announcement, these products will no longer be required to undergo IECEE CBTR/CBTC testing. Instead, these products are required to have ISO/IEC 17025 accredited laboratory issued Test Reports issued only by Dubai Central Laboratory for its ECAS and EQM certification (UAE Certification).
Please contact your local UL Solutions office for more information.Safety
China
China SAMR Announces Implementation of the Mandatory CCC Certification of Lithium-Ion Batteries and Chargers for Electric Bicycles
On July 2, 2024, the State Administration for Market Regulation (SAMR) announced the implementation of compulsory product certification management for lithium-ion batteries and chargers for electric bicycles starting Oct. 15, 2024.
Official sourceSafety
Australia, New Zealand
Australia and New Zealand Prepare Draft Standard DR AS/NZS 62061:202X – Functional Safety of Safety-Related Control Systems for Machines
On June 26, 2024, Standards Australia and New Zealand prepared draft standard DR AS/NZS 62061:202X. This standard specifies requirements and makes recommendations for the design, integration and validation of safety-related control systems (SCS) for machines.
The closing date for comments was July 24, 2024.
Official sourceSafety
Global
IEC Publishes New Standard IEC 62841-2-20:2024 – Safety Requirements for Hand-Held Band Saws
On June 27, 2024, the International Electrotechnical Commission (IEC) released IEC 62841-2-20:2024. This standard deals with the safety requirements for electric motor-operated hand-held tools, transportable tools, and lawn and garden machinery, particularly for hand-held band saws.
Official sourceSafety
Global
IEC Publishes New Standard IEC 62841-2-16:2024 – Safety Requirements for Hand-Held Fastener Driving Tools
On June 27, 2024, the International Electrotechnical Commission (IEC) released IEC 62841-2-16:2024. This standard deals with the safety requirements for electric motor-operated hand-held tools, transportable tools, and lawn and garden machinery, particularly for hand-held fastener driving tools.
Official sourceSafety
Global
IEC Publishes New Standard IEC 62841-2-19:2024 – Safety Requirements for Hand-Held Jointers
On June 27, 2024, the International Electrotechnical Commission (IEC) released IEC 62841-2-19:2024. This standard deals with the safety requirements for electric motor-operated hand-held tools, transportable tools, and lawn and garden machinery, particularly for hand-held jointers.
Official sourceSafety
India
India BIS Releases Draft Revised Standard IS 14255:1995 for Aerial Bunched Cables for Working Voltages up to and Including 1100 Volts
On July 5, 2024, the Bureau of Indian Standards (BIS) released draft standard for IS 14255:1995, Aerial Bunched Cables for Working Voltages up to and Including 1100 Volts – Specification (First Revision) to meet the different types of aerial bunched cables in demand.
Comments and feedback were accepted until Aug. 4, 2024.
Official sourceSafety
Global
IEC Publishes New Standard IEC 62271-200:2021/AMD1:2024 - AC Metal-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and up to and Including 52 kV
On June 27, 2024, the International Electrotechnical Commission (IEC) released IEC 62271-200:2021/AMD1:2024. This standard specifies requirements for metal-enclosed switchgear and controlgear for alternating current with rated voltages above 1 kV and up to and including 52 kV.
Official sourceSafety
Australia, New Zealand
Australia and New Zealand Publish Amendment to Standard AS/NZS 60335.2.7:2020 - Safety Requirements for Clothes Washing Machines
On June 28, 2024, the Standards Australia and New Zealand published amendment to standard AS/NZS 60335.2.7:2020. This standard deals with the safety of electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not more than 250 V for
single-phase appliances and 480 V for other appliances.
Official sourceSafety
Saudi Arabia
Saudi Arabia SASO Prepares Draft Technical Regulation for Electric Vehicles
On July 10, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) prepared a draft technical regulation for electric vehicles.
Comments and feedback can be send to enquirypoint@saso.gov.sa until Sept. 8, 2024.
Official sourceSafety
USA
USA Underwriters Laboratories Publishes Edition 10 of UL 875 - Electric Dry-Bath Heaters
On July 8, 2024, the Underwriters Laboratories published Edition 10 of UL 875. This standard covers electric dry-bath heating equipment and other equipment rated 600 volts or less that is intended to produce a dry-heat environment to be installed in accordance with the National Electrical Code, ANSI/NFPA 70.
Official sourceSafety
Australia, New Zealand
Australia and New Zealand Publish Standard AS/NZS 61558.2.7:2024 - Safety Requirements and Tests for Transformers and Power Supply Units for Toys
On June 28, 2024, the Standards Australia and New Zealand published standard AS/NZS 61558.2.7:2024. This standard deals with the safety of transformers for toys and power supply units incorporating transformers for toys.
Official sourceSafety;
Uruguay
Uruguay URSEA Announces Public Consultation for the Modification of Safety Regulation for Gas Appliances, Portable Containers for LPG and Natural Gas Annexes
On July 2, 2024, the board of directors of the Energy and Water Services Regulatory Unit (URSEA) announced the public consultation regarding the modification of Annexes II and III of the Safety Regulations for Gas Appliances, Portable Containers and Their Accessories for LPG and Natural Gas.
Participation and comments can be sent to User gub.uy until Sept. 9, 2024.
Official sourceSafety
Australia, New Zealand
Australia and New Zealand Publish Standard AS/NZS 61730.2:2024 - Requirements for Testing of Photovoltaic (PV) Modules
On June 28, 2024, the Standards Australia and New Zealand published standard AS/NZS 61730.2:2024. This standard outlines the requirements of construction and the lists of tests a PV module is required to fulfill for safety qualification.
Official sourceSafety
Australia, New Zealand
Australia and New Zealand Publish Standard AS/NZS 62841.3.5:2024 - Safety Requirements for Transportable Band Saws
On June 28, 2024, the Standards Australia and New Zealand published standard AS/NZS 62841.3.5:2024. This standard applies to band saws intended for cutting wood and
analogous materials, plastics and metals, except magnesium.
Official sourceSafety
Australia
Australia EESS Announces the Documentation Requirements for Certification of Microwave Ovens
On July 3, 2024, the Australia Electrical Equipment Safety System (EESS) announced Information Bulletin 24-071 documentation requirements for certification of microwave ovens. For certification of microwave ovens in the EESS, there will be documentation to ensure that any listed alternative fuses are adequately assessed.
Official sourceSafety
Australia
Australia EESS Announces Clarification for the Classification Level for Different Types of Refrigerators
On July 3, 2024, the Australia Electrical Equipment Safety System (EESS) published information bulletin regarding categorizing refrigerators. This bulletin provides clarification for the classification level (level 3, 2 or 1) for different types of refrigerators.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Edition of CSA E60335-2-7 - Safety Requirements for Washing Machines
On July 4, 2024, the Standards Council of Canada (SCC) published CSA E60335-2-7. This standard covers safety requirements for washing machines.
Comments were accepted until July 30, 2024.
Official sourceSafety
Moldova
Moldova MDED Issues Draft Law on General Product Safety
On July 10, 2024, the Ministry of Economic Development and Digitalization (MDED) issued the draft Law on General Product Safety for public consultation until July 24, 2024.
Official sourceSafety
Canada, USA
Canada and USA CSA Announce Publication of UL2202 ed3/ CSA C22.2 No.346 - DC Charging Equipment for Electric Vehicles
On July 8, 2024, the Canadian Standards Association (CSA) announced the publication of UL2202 ed3/ CSA C22.2 No.346. Thee standards pertains to DC charging equipment for electric vehicles.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Standard of CSA E60335-2-122 - Safety Requirements for Commercial Washing Machines
On July 4, 2024, the Standards Council of Canada (SCC) published CSA E60335-2-122. This standard covers safety requirements for commercial washing machines.
Comments were accepted until July 30, 2024.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Edition of CSA C22.2 No. 64 - Household Cooking and Liquid-Heating Appliances
On July 4, 2024, the Standards Council of Canada (SCC) published CSA C22.2 No. 64. This standard covers household cooking and liquid-heating appliances.
Comments were accepted until July 30, 2024.
Official sourceSafety
Uruguay
Uruguay URSEA Implements Process to Import and Market Power Systems for Electric Vehicles (SAVE)
On July 16, 2024, the Regulatory Unit for Energy and Water Services (URSEA) implemented a specific procedure for the authorization of the commercialization of power systems for electric vehicles - SAVE.
Official sourceSafety
Australia
Australia EESS Announces Requirements for Plug-pack Type Power Supplies, Battery Chargers and Similar Equipment with Integral Pins
On July 3, 2024, the Australia Electrical Equipment Safety System (EESS) announced the requirements for plug-pack type power supplies, battery chargers and similar equipment with integral pins. The purpose of this bulletin is to prevent certification of electrical equipment with integral plug pins from having international plug pins such as U.S.or Japanese style plug pins, or European style plug pins that form a molded part of the enclosure of the equipment.
Official sourceSafety
India
India BIS Releases Draft Revised Standard IS 694:2010 - Polyvinyl Chloride Insulated Unsheathed and Sheathed Cables Cords with Rigid and Flexible Conductor for Rated Voltages up to and Including 1100V
On July 4, 2024, the Bureau of Indian Standards (BIS) released draft standard for IS 694:2010 polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 V (fifth revision) in order to align with the international practices.
Comments and feedback were accepted until Aug. 3, 2024.
Official sourceSafety
Canada
Canada SCC Publishes New Draft Edition of C22.1 - Canadian Electrical Code, Part I, Safety Standard for Electrical Installations
On July 4, 2024, the Standards Council of Canada (SCC) published C22.1. This standard establishes guidelines and requirements for electrical installations, ensuring safety and promoting best practices in the industry.
Comments were accepted until July 30, 2024.
Official sourceSafety
EU
European Union EC Publishes Commission Implementing Regulation regarding Health and Safety At Work – Template to Collect Data on Machinery or Related Products
On July 15, 2024, the European Commission (EC) published Commission Implementing Regulation (EU) 2024/1922 of 12 July 2024 setting out the template for the collection by the Member States of the data and the information referred to in Article 6(5), points (a) to (d) of Machinery Regulation (EU) 2023/1230 about harms, safety defects, accidents, damage casued by machinery.
This Regulation entered into force on the twentieth day (Aug. 4, 2024) following that of its publication in the Official Journal of the European Union.
Official sourceSafety
Thailand
Thailand MIND Announces Industrial Product Standard for Miscellaneous Lampholders (TIS 60838 Part 1-2566)
On July 5, 2024, the Ministry of Industry (MIND) announced the establishment of an industrial product standard for the general requirements and tests of miscellaneous lamp holders, TIS 60838 Part 1-2566 (2023). This standard was effective on July 6, 2024.
Official sourceSafety
Thailand
Thailand MIND Announces the Industrial Product Standard for Connectors for LED-Modules (TIS 60838 Part 2(2)-2566)
On July 5, 2024, the Ministry of Industry (MIND) announced the establishment of an industrial product standard for the general requirements and tests of connectors for LED modules, TIS 60838 Part 2(2)-2566 (2023). This standard is effective July 6, 2024, and It's still considered as voluntary standard until TISI has additional announcement to determine it as mandatory standard with enforcement date.
Official sourceSafety
India
India BIS Releases Draft Revised Standard IS 9968 Part 1:1988-Specification for Elastomer Insulated Cables Part 1 for Working Voltages up to and Including 1100 Volts (Second Revision)
On July 4, 2024, the Bureau of Indian Standards (BIS) released a draft standard for IS 9968 Part 1:1988 Specification for Elastomer Insulated Cables Part 1 for Working Voltages up to and including 1100 volts (Second Revision) in order to align with the international practices, to the extent considered appropriate. Also, the amendments of the first revision have been incorporated. The major change in this revision also includes the addition of braided cords.
Comments and feedback were accepted until Aug. 3, 2024.
Official sourceSafety
EU
European Union CEN Publishes New Standard EN 12077-2:2024 - Cranes Safety - Limiting and Indicating Devices
On June 19, 2024, the European Committee for Standardization (CEN) published a new standard EN 12077-2:2024 for cranes safety - requirements for health and safety - part 2: limiting and indicating devices.
The date of withdrawal of superseded version is Jan. 31, 2025.
Official sourceSafety
Thailand
Thailand MIND Announces Industrial Product Standard for Appliances for Heating Liquids (TIS 60335 Part 2(15)-2567)
On July 15, 2024, the Ministry of Industry (MIND) announced the establishment of an industrial product standard for the safety of electrical appliances for heating liquids for household use and similar purposes, TIS 60335 Part 2(15)-2567.
This industry product standard is waiting for the Ministerial Regulation to be published in the Royal Gazette to become mandatory.
Official sourceSafety
Australia
Australia Prepares Draft Standards for Safety Requirements and Tests of Pedestrian-controlled combustion engine powered Lawnmowers
On June 28, 2024, the Standards Australia prepared draft standards DR AS 5395.1:2024 and DR AS 5395.2:2024. These draft standards specifies safety requirements terminology and common test methods used for verification of combustion engine powered rotary lawnmowers and cylinder lawnmowers including
pedestrian-controlled and ride-on types.
The closing date for comments is Aug. 28, 2024 and can be submitted on this link.
Official sourceSafety
Thailand
Thailand MIND Announces New Industrial Product Standard for Electric Irons (TIS 60335 Part 2(3)-2567)
On July 15, 2024, the Ministry of Industry (MIND) announced the establishment of an industrial product standard for the safety of electric Irons, TIS 60335 Part 2(3)-2567.
This industry product standard is waiting for the Ministerial Regulation to be published in the Royal Gazette to become mandatory.
Official sourceSafety
Thailand
Thailand MIND Announces New Version of the Industrial Product Standard for Portable Power Banks (TIS 2879-2567)
On July 15, 2024, the Ministry of Industry (MIND) announced the establishment of an industrial product standard for the safety of portable power banks, TIS 2879-2567.
This industry product standard is waiting for the Ministerial Regulation to be published in the Royal Gazette to become mandatory.
Official sourceSafety
Thailand
Thailand MIND Announces New Version of the Industrial Product Standard for Residual Current Operated Circuit-Breakers with Integral Overcurrent Protection (RCBOs) (TIS 909-2567)
On July 15, 2024, the Ministry of Industry (MIND) announced the establishment of an industrial product standard for residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs), TIS 909-2567.
This industry product standard is waiting for the Ministerial Regulation to be published in the Royal Gazette to become mandatory.
Official sourceSafety
EU
European Union CENELEC Publishes Amended Standard EN 60335-2-29:2021/A11:2024 - Safety Requirements for Battery Chargers
On July 19, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60335-2-29:2021/A11:2024 for household and similar electrical appliances - safety - part 2-29: particular requirements for battery chargers.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN 50172:2024 - Emergency Escape Lighting Systems
On July 12, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN 50172:2024 for emergency escape lighting systems.
The date of withdrawal of superseded version is May 27, 2027.
Official sourceSafety
Australia
Australia EESS Announces the General Guidance on Treatment of Corrigendum in EESS Certification
On July 3, 2024, the Australia Electrical Equipment Safety System (EESS) announced the general guidance on treatment of corrigendum in EESS Certification (Notice 24-069). This guidance clarifies how corrigendum will be reflected in the relevant section of the certificate when it is issued to a standard.
Official sourceSafety
India
India MHI Releases Draft Grouping Guidelines for Products Under Electrical Equipment Quality Control Order
On July 18, 2024, the Ministry of Heavy Industries (MHI) released draft grouping guidelines for products under Electrical Equipment (Quality Control) Order.
Comments and feedback were accepted until Aug. 2, 2024.
Official sourceSafety
Thailand
Thailand MIND Announces New Industrial Product Standard for Safety of Lithium-Ion Battery Systems Used Electrically Propelled Mopeds and Motorcycles (TIS 3712-2566)
On July 5, 2024, the Ministry of Industry (MIND) announced the establishment of an industrial product standard for TIS 3712-2566 (2023) Electrically Propelled Mopeds and Motorcycles - Test Specifications and Safety Requirements for Lithium-Ion Battery Systems. This standard entered into force on July 6, 2024.
Official sourceSafety
Thailand
Thailand MIND Announces New Industrial Product Standard for Conductive Connection of Electrically Propelled Mopeds and Motorcycles (TIS 3713-2566)
On July 5, 2024, the Ministry of Industry (MIND) announced the establishment of an industrial product standard for TIS 3713-2566 (2023) Electrically Propelled Mopeds and Motorcycles - Safety Requirements for Conductive Connection to an External Electric Power Supply. This standard entered into force on July 6, 2024.
Official sourceSafety
Serbia
Serbia ME Publishes New Lists of Serbian Standards for Low Voltage Electrical Equipment (2024 Update)
On June 28, 2024, the Ministry of Economy (ME) published the list of Serbian standards in the field of electrical equipment intended for use within certain voltage limits (LVD) in the Official Gazette of the Republic of Serbia No. 57/2024, page 33. This list adopted harmonized standards from the reference list of European harmonized standards.
Official sourceSafety
EU
European Union CEN Publishes New Standard EN 15502-2-2:2024 - Gas-fired Central Heating Boilers for Type B1 Appliances
On July 24, 2024, the European Committee for Standardization (CEN) published a new standard EN 15502-2-2:2024 for gas-fired central heating boilers - part 2-2: specific standard for type B1 appliances.
The date of withdrawal of superseded version is Jan. 31, 2025.
Official sourceSafety
Israel
Israel MEI Requests Amendment Transition Period for Replacement of Official Standard SI 60745 Part 1 Hand-held Motor-Operated Electric Tools
On July 14, 2024, the Ministry of Economy and Industry (MEI) requested to amend the transition period for the replacement of the official standard SI 60745 Part 1 - hand-held motor-operated electric tools - safety general requirements (replaced by SI 62841 Part 1 - motor-powered electric tools - hand-held tools, portable tools and lawn and garden machines - safety general requirements).
Comments and feedback were acepted until Aug. 13, 2024.
Official sourceSafety
Ecuador
Ecuador INEN Opens Public Consultation for NTE INEN-IEC 61851-1 - Requirements for Electric Vehicle Conductive Charging System
On July 19, 2024, the Ecuadorian Standardization Service (INEN) opened a public consultation for NTE INEN-IEC 61851-1. This standard deals with the general requirements for electric vehicle conductive charging system.
Comments are accepted until Sept. 17, 2024.
Official sourceSafety
Chile
Chile SEC Publishes Technical Instruction for General Installation and Safety Requirements for Battery Energy Storage Systems
On July 23, 2024, the Superintendency of Electricity and Fuels (SEC) published a draft technical instruction RGR N°06/2024. This instruction applies to the design and execution of installations of energy storage systems through batteries in electrical installation.
Comments can be submitted until Sept. 21, 2024.
Official sourceSafety
China
China MIIT Issues Public Consultation for Five Mandatory National Standards including Electric Vehicles Traction Battery Safety Standard
On May 27, 2024, the Ministry of Industry and Information Technology (MIIT) announced the public consultation of five mandatory national standards, including the technical requirements and testing methods for passenger car braking systems and electric vehicles traction battery safety requirements.
The deadline for soliciting opinions was July 27, 2024.
Official sourceSafety
Chile
Chile SEC Publishes Technical Instruction for Design and Execution of Photovoltaic Installations Connected to Distribution Networks
On July 23, 2024, the Superintendency of Electricity and Fuels (SEC) published a draft technical instruction RGR N°02/2024. This instruction applies to the design and execution of photovoltaic installations connected to distribution facilities.
Comments can be submitted until Sept. 21, 2024.
Official sourceSafety
Singapore
Singapore CPSO Publishes Circular on Suspension of Registered Controlled Goods
On July 24, 2024, the Consumer Product Safety Office (CPSO) published a circular under reference no. CPSO-240724-15 on the suspension of registered controlled goods (CGs).
Official sourceSafety
Global, CB Scheme
IECEE Adds New Decision Sheet for Power Cord Used for Hair Straighteners and Curlers on Week 30 (2024-W30)
On July 26, 2024, new decision sheet related to power cord used for hair straighteners and curlers was uploaded on the IECEE website.
- PDSH 2252 - Type of Power Cord Used for Hair Straighteners and Curlers which Exceed the 130 K Limit
Official sourceSafety
Thailand
Thailand TISI Issues Draft Industrial Product Standard for Electric Vehicle Conductive Charging System - Part 1: General Requirements (TIS 61851 Part 1-25XX)
On July 15, 2024, the Thai Industrial Standards Institute (TISI) is issued draft industrial product standard for general requirements for electric vehicle conductive charging system (TIS 61851 Part 1-25XX).
Comments on the draft standard were accepted until July 31, 2024.
Official sourceSafety
Thailand
Thailand TISI Issues Draft of the Industrial Product Standard for In-Cable Control and Protection Device for Mode 2 Charging of Electric Road Vehicles (TIS 62752-25XX)
On July 15, 2024, the Thai Industrial Standards Institute (TISI) issued a draft industrial product standard for in-cable control and protection device (IC-CPD) for mode 2 charging of electric road vehicles (TIS 62752-25XX). The deadline to submit comments was July 31, 2024.
Official sourceSafety
EU
European Union CENELEC Publishes New Standard EN IEC 61558-2-10:2024 - Safety of Transformers with Output Voltages Exceeding 1000V
On July 26, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN IEC 61558-2-10:2024 for safety of transformers, reactors, power supply units and combinations thereof - part 2-10: particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1000V.
The date of withdrawal of superseded version is July 12, 2027.
Official sourceSafety, EMC
Israel
Israel MEI Prepares Corrigendum Draft Standard SI 60335 Part 2.11 - Safety of Tumble Dryers
On June 30, 2024, the Ministry of Economy and Industry (MEI) prepared correction of the draft standard SI 60335 part 2.11 for household and similar electrical appliances – safety particular requirements for tumble dryers, to replace the mandatory standard SI 900 Part 2.11 of November 2017.
Comments and feedback were accepted until July 30, 2024.
Official sourceSafety, EMC
Israel
Israel MEI Releases Notification to Change Official Standards for Audio/Video, Information and Communication Technology Equipment, Self-ballasted, Double-capped, Single-capped Fluorescent Lamps
On July 2, 2024, the Ministry of Economy and Industry (MEI) released notification to change the official standards for audio/video, information and communication technology equipment, self-ballasted, double-capped, single-capped fluorescent lamps.
Comments and feedback were accepted until Aug. 1, 2024.
Official sourceSafety, EMC, Energy Efficiency, Explosive Atmospheres, Noise, REACH, RoHS, Electrical and Electronic Waste, Chemicals, F Gas, Sanitation, Wireless
Moldova
Moldovan Government Publishes New Regulations on the Cooperation of Market Surveillance Authorities and the Customs Service Regarding Product Safety and Conformity
On June 7, 2024, the Government of the Republic of Moldova published a decision regarding the cooperation of the market surveillance authorities with the Customs Service regarding product safety and conformity (Government Decision No. 346/2024). This Decision entered into force on July 27, 2024.
Official sourceSafety, Performance
Sri Lanka
Sri Lanka MOFP Publishes Updated Version of Standardization and Quality Control Regulations
On May 17, 2024, the Ministry of Finance, Economic Stabilization and National Policies (MOFP) published an updated version of Imports and Exports Control Regulation cited as Standardization and Quality Control Regulations under the Importers and Exports (Control) Act, No.1 of 1969. This Regulation specifies the precise standards and criteria that must be adhered to by imported goods entering Sri Lanka, encompassing various aspects such as quality, safety, and labeling requirements.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes Amended Standard EN IEC 62061:2021/A1:2024 - Functional Safety of Safety-Related Control Systems
On June 28, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN IEC 62061:2021/A1:2024 for safety of machinery - functional safety of safety-related control systems.
Official sourceSafety, Performance
United Arab Emirates
UAE MoIAT Publishes Standard UAE.S 2698:2024 - Technical Requirements for Electric Vehicles
On May 15 2024, the Ministry of Industry and Advanced Technology (MoIAT) published the standard UAE.S 2698:2024 - Technical requirements for electric vehicles. This standard is concerned with all battery electric vehicles (BEV and PHEV) categories M and N with a speed of more than 25 km/h taking in consideration
the compatibility with the relevant Gulf standards and regulations.
Please contact your local UL Solutions office for more information.Safety, Performance
Ecuador
Ecuador INEN Announces Details of Meeting of Technical Committee for Technical Regulation on Charging System for Electric Vehicles
The Ecuadorian Standardization Service (INEN) released the meeting schedule for the Standardization Technical Committee Systems for Transfer of Power/Electrical Energy for Road Vehicles and Industrial Trucks Electric Propulsion for NTE INEN-IEC 61851-1 Charging system conductive for electric vehicles –Part 1: General requirements (IEC 61851 1:2017+ COR1: 2023, IDT).
Official sourceSafety, Performance
Global, CB Scheme
IECEE Adds New Test Report Forms (TRFs) on Week 27 (2024-W27)
On July 5, 2024, new TRFs were published and added on the IECEE website.
Official sourceSafety, Performance
Global
IEC Publishes New Standard IEC 60384-21:2024 - Sectional Specification for Fixed Surface Mount Multilayer Capacitors of Ceramic Dielectric, Class 1
On June 21, 2024, the International Electrotechnical Commission (IEC) released IEC 60384-21:2024. This standard deals with the sectional specification of fixed surface mount multilayer capacitors of ceramic dielectric, Class 1.
Official sourceSafety, Performance
Global
IEC Publishes New Standard IEC 60601-2-37:2024 - Safety and Performance Requirements of Ultrasonic Medical Diagnostic and Monitoring Equipment
On July 2, 2024, the International Electrotechnical Commission (IEC) released IEC 60601-2-37:2024. This standard deals with the requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment.
Official sourceSafety, Performance
India
India BIS Publishes Revised Product Manuals for Stationary Storage Type Electric Water Heaters
On July 12, 2024, the Bureau of Indian Standards (BIS) published revised Product Manual for IS 2082 : 2018 Stationary Storage Type Electric Water Heaters - Specification (Fifth Revision) and IS 302-2-21 : 2018 Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements Section 21 Stationary Storage Type Electric Water Heaters (Second Revision).
The guidelines provided will be implemented immediately.
Official sourceSafety, Performance
India
India BIS Publishes Revised Product Manuals for Electric Immersion Water Heaters
On July 12, 2024, the Bureau of Indian Standards (BIS) published revised Product Manuals for IS 368 : 2014 Electric immersion water heaters - Specification (Fifth Revision) and IS 302-2-201 : 2008 Safety of household and similar electrical appliances Part 2 particular requirements Sec 201 electric immersion water heaters (First Revision).
The guidelines provided will be implemented immediately.
Offici al sourceSafety, Performance
India
India BIS Releases Guidelines for Certification of Electric Instantaneous Water Heaters
On July 12, 2024, the Bureau of Indian Standards (BIS) released general guidelines regarding certification of electric instantaneous water heaters.
This will come into force on Sept. 5, 2024.
Official sourceSafety, Performance
Brazil
Brazil INMETRO Proposes the Incorporation Into the National Legal System of the Draft Mercosur Technical Regulation for Gas Cooking Appliances
On July 12, 2024, the National Institute of Metrology, Quality and Technology (INMETRO) proposed the incorporation into the national legal system of the Mercosur Technical Regulation (RTM) for Gas Cooking Appliances (draft stage), replacing the Mercosur Technical Regulation Minimum Safety and Energy Efficiency Requirements for Household Appliances that Use Gas as Fuel, approved by GMC Resolution No. 36/08.
The closing date the public consultation is Sept. 10, 2024.
Click here to submit feedback and suggestions. Those having difficulty using the platform can request assistance via email at dconf.consultapublica@inmetro.gov.br.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes Amended Standard EN 60898-1:2019/A1:2024 - Electrical Accessories - Circuit-Breakers for A.C. Operation
On July 12, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60898-1:2019/A1:2024 for electrical accessories - circuit-breakers for overcurrent protection for household and similar installations - part 1: circuit-breakers for a.c. operation.
Official sourceSafety, Performance
EU
European Union CENELEC Publishes Amended Standard EN 60898-1:2019/A11:2024 - Electrical Accessories - Circuit-Breakers for A.C. Operation
On July 12, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published an amended standard EN 60898-1:2019/A11:2024 for electrical accessories - circuit-breakers for overcurrent protection for household and similar installations - part 1: circuit-breakers for a.c. operation.
Official sourceSanitation
Thailand
Thailand OCPB Publishes Announcement on Designation of Water Filters as Label-controlled Products
On May 28, 2024, the Thailand Office of Consumer Protection Board (OCPB) issued an Announcement of the Committee on Labels on the designation of water filters as label-controlled products.
It will come into force 120 days after the date of its publication in the Government Gazette, which is approximately on Sept. 25, 2024.
Official sourceSanitation
Australia
Australia ABCB Issues New Edition of WaterMark Schedule of Products
On June 1, 2024, the Australia Building Codes Board (ABCB) published the new edition of WaterMark schedule of products which contains the list of products predetermined to require Watermark Certification.
Official sourceSanitation
EU
European Union EC Publishes Draft Regulation on the Use of Bisphenol A (BPA) and Other Bisphenols and their Derivatives in Food Contact Materials
On June 27, 2024, the European Commission (EC) published a draft regulation that prohibits the use of bisphenol A (BPA), other bisphenols, and their derivatives in the manufacture of food contact materials and articles. It also sets out derogations, establishes guidelines for compliance and testing, and outlines transitional periods for the application of requirements.
The public consultation closes on Aug. 26, 2024.
Official sourceSanitation
Argentina
Argentina Mercosur Publishes Draft Amendment to Technical Regulations on Cellulosic Materials, Packaging and Equipment Intended to be in Contact with Food
On June 19, 2024, the Southern Common Market (Mercosur) notified Draft Resolution No. 02/24 which amends GMC Resolution No. 40/15 – Mercosur Technical Regulation on cellulosic materials, packaging, and equipment that come into contact with food.
The deadline for submission of comments is Aug. 17, 2024.
Official sourceSanitation
Germany
Germany BMEL Publishes Twenty-Second Ordinance Amending the Consumer Goods Ordinance
On April 9, 2024, the Germany Federal Ministry of Food and Agriculture (BMEL-Bundesministerium für Ernährung und Landwirtschaft) published the Twenty-Second Ordinance Amending the Consumer Goods Ordinance with new obligations for operators in the food contact materials industry.
This Regulation came into force on July 1, 2024.
Official sourceSanitation
Uruguay
Uruguay MIEM Releases Public Consultation on the Modification of the MERCOSUR Technical Regulation on Cellulose Materials, Packaging and Equipment Intended to be in Contact with Food
On July 8, 2024, the Ministry of Industry, Energy and Mining (MIEM) released Public Consultation on the Modification of the MERCOSUR Technical Regulation on Cellulose Materials, Packaging and Equipment Intended to be in Contact with Food with amendments of a new material restriction.
The deadline for comments is Sept. 8, 2024.
Official sourceSanitation
Saudi Arabia
Saudi Arabia SASO Consults on Amendment to the Technical Regulation for Food Safety of Tools and Appliances Used in the Kitchen
On July 1, 2024, the Saudi Standards, Metrology and Quality Organization (SASO) published a proposal to amend the Technical Regulation for food safety in tools and appliances used in the kitchen.
The public consultation was open untll July 29, 2024.
Official sourceSustainability
EU
European Parliament and the Council of the European Union Adopts the Right to Repair Directive
On July 10, 2024, the European Parliament and the Council of the European Union adopted a directive promoting the repair of broken or defective goods, also known as the Right-to-Repair Directive (R2RD), was published on the Official Journal of the European Union.
This legislation imposes new obligations on manufactures across all industries, with the aim of encouraging consumers to choose repair over replacement.
The Directive entered into force on July 30, 2024.
Official sourceSustainability
South Korea
South Korea Ministry of Environment Publishes Notice on Packaging Material Recyclability Rating Criteria
On July 11, 2024, the Korea Ministry of Environment published Notice No. 2024-131 Packaging Material Recyclability Rating Criteria. This Notice amends Notice No. 2023-73 which reflects specific details on evaluating the material, color, weight, and ease of recycling of products and packaging materials.
Official sourceSustainability
United Kingdom
United Kingdom - Northern Ireland DAERA Publishes Draft Environmental Protection (Single-use Vapes) Regulations
On July 11, 2024, the Department of Agriculture, Environment and Rural Affairs (DAERA) published the draft Environmental Protection (Single-use Vapes) Regulations (Northern Ireland) 2024 through World Trade Organization (WTO).
Any comments or views on the draft regulations are accepted until Sept. 9, 2024.
Official sourceSustainability
France
Government of France Announces Postponement of Non-recyclable Polymers Ban from 2025 to 2030
On June 5, 2024, the Government of France published in the Senate Official Journal an announcement on the probable postponement of the ban on packaging made in whole or in part from styrenic polymers or copolymers, which are not recyclable and are unable to integrate a recycling sector from 2025 to 2030.
Official sourceSustainability
South Korea
South Korea Ministry of Environment Implements Rules on Standards for Product Packaging Materials and Packaging Methods
On April 30, 2024, the Ministry of Environment of South Korea implemented the Rules on Standards for Product Packaging Materials and Packaging Methods to ensure that product packaging complies with the standards for packaging methods and to prevent excessive packaging for delivery.
Official sourceSustainability
Canada
Canada ISED Launches Right to Repair Consultation
On June 28, 2024, the Canada Innovation, Science and Economic Development Canada (ISED) collaborated with Environment and Climate Change Canada (ECCC) and Agriculture and Agri-Food Canada (AAFC) to launch Right to Repair Consultation for home appliances and consumer electronics to gather feedback to inform policy direction with a focus on durability, repairability, and interoperability.
The feedback period is until Sept. 26, 2024.
Official sourceSustainability
India
India MoEF Publishes Battery Waste Management (Second Amendment) Rules, 2024
On June 20, 2024, the Ministry of Environment, Forest and Climate Change (MoEF) published Battery Waste Management (Second Amendment) Rules, 2024. The new Rules aim to provide producers of domestically recycled batteries additional time to meet targets of minimum use of recycled materials of batteries.
These Rules took effect on the same day of its publication.
Please contact your local UL Solutions office for more information.Sustainability
USA
USA DA APHIS Publishes Notice on Implementation of Revised Lacey Act Provisions
On May 31, 2024, the U.S. Department of Agriculture’s Animal and Plant Health Inspection Service (USDA APHIS) published draft of Implementation of Revised Lacey Act Provisions. The purpose of this notice is to inform the public about another phase of the Federal Government's enforcement schedule.
All comments were submitted on July 30, 2024.
Official sourceSustainability
USA Minnesota
USA - Minnesota Pollution Control Agency (MPCA) Establishes Packaging Waste and Cost Reduction Act
On May 21, 2024, the Minnesota Pollution Control Agency (MPCA) published a Packaging Waste and Cost Reduction Act, implementing an Extended Producer Responsibility (EPR) scheme for packaging and paper products, subject to limited exemptions and requires producers to appoint a Producer Responsibility Organization (PRO) by Jan. 2025 to set specific performance targets.
Official sourceSustainability
Japan
Japan Government Issues Update to Enforcement Order of the Container and Packaging Recycling Law
On June 14, 2024, the Japanese Government issued an update to the Enforcementder of the Act on the Promotion of Separate Collection and Recycling of Containers and Packaging. The regulation is slightly revised regarding the exempted groups in Article 2, due to the amended Private School Act. This update
will take effect on April 1, 2025.
Official sourceSustainability
Moldova
Moldova Ministry of the Environment Invites Economic Agents to Contribute to the Improvement of the Regulation on Packaging and Packaging Waste
On July 25, 2024, the Ministry of the Environment invited economic agents to contribute to the improvement of the regulation on packaging and packaging waste.
Official sourceSustainability
EU
European Union CENELEC Publishes New Standard EN 50735-1:2024 - Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Repairability
On July 26, 2024, the European Committee for Electrotechnical Standardization (CENELEC) published a new standard EN 50735-1:2024 for electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - environmental aspects - part 1: requirements for repairability.
Official sourceSustainability, Electrical and Electronic Waste
India
India CPCB Issues Notice Clarifying Recycling and Labeling Provisions under Battery Waste Management Rules, 2022
On May 28, 2024, the Central Pollution Control Board (CPCB) of India released a notice on implementation of Battery Waste Management Rules, 2022. This Notice aims to clarify a previous Office Memorandum (OM) issued on May 17, 2024 by the Ministry of Environment, Forest, and Climate Change (MoEF and CC) regarding clarification on producer obligation for use of domestically recycled materials in battery manufacturing and labeling requirements under Schedule I of the Battery Waste Management Rules, 2022.
Official sourceSustainability, Energy Efficiency, Chemicals, Performance, Noise, Water Efficiency
EU
European Parliament and the Council of the European Union Publishes Ecodesign for Sustainable Product Regulation
On June 28, 2024, the European Parliament and the Council of the European Union published Regulation (EU) 2024/1781 establishing a framework for the setting of ecodesign requirements for sustainable products has been published on Official Journal of the European Union.
The new Ecodesign for Sustainable Product Regulation (ESPR) repeals the current Ecodesign Directive 2009/125/EC, which currently only covers energy-related products, to broaden its scope to all products placed on the EU market, whether produced inside or outside the EU.
ESPR sets a new sustainability and ecodesign approach enabling the adoption of product specific measure which will set, according to product category, new requirements including performance requirements, durability, carbon footprint, recycled content, and many more, with a strong focus on product information such as Digital Product Passport, labels and information requirements.
The new Regulation entered into force on July 18, 2024 and directly applicable in all Member States.
Official sourceWater Efficiency
Singapore
Singapore PUB Releases Water Efficiency Label Requirements for Registered Water Fittings
On June 19, 2024, the Public Utilities Board (PUB) of Singapore issued a circular under WSN 92413/90/202401/WELSLABEL on the following requirements:
- Water efficiency label for registered water fittings
- Advertisements on supply of registered water fittings
Please contact your local UL Solutions office for more information.Water Efficiency
South Korea
South Korea ME Issues Notice on the Test Method for Maximum Water Flow Rate of Faucets and Related Water-Saving Devices
On July 5, 2024, the Ministry of Environment (ME) issued a notice on the test method for the maximum water flow rate of faucets and related water-saving devices. This Notice takes effect on the same day.
Official sourceWireless
United Kingdom
United Kingdom Ofcom Releases Vision for Sharing Upper 6 GHz Spectrum Between Wi-Fi and Mobile
On May 21, 2024, the Office of Communications (Ofcom) released its vision for sharing upper 6 GHz spectrum between Wi-Fi and mobile.
Official sourceWireless
United Kingdom
United Kingdom Ofcom Releases Statement on Analogue Radio Technical Code
On June 17, 2024, the Office of Communications (Ofcom) published Analogue Radio Technical Code Statement on Updating the Ofcom Site Engineering Code for Analogue Radio Broadcast Transmission Systems.
Official sourceWireless
United Kingdom
United Kingdom Ofcom Releases Update on Revoking Licences in the Unpaired 2100 MHz Band
On June 18, 2024, the Office of Communications (Ofcom) released an update on revoking licences in the unpaired 2100 MHz band.
Official sourceWireless
EU
European Union EC Releases Guidance for the Interpretation of the Common Charger Directive
On May 7, 2024, the European Commission (EC) released C/2024/2997, Commission Notice Guidance for the interpretation of the Common Charger Directive. This document aims to provide a better understanding of the provisions of the ‘Common Charger Directive (Directive (EU) 2022/2380) for a more uniform and coherent application. The information comes in the form of a summary and then in the form of questions and answers,
Official sourceWireless
Australia
Australia ACMA Releases Amendments to the Radiocommunications Equipment Rules
On June 21, 2024, the Australian Communications and Media Authority (ACMA) finalized the Radiocommunications Equipment (General) Amendment Rules 2024 (No. 1). This amends Radiocommunications Equipment (General) Rules 2021 which basically establishes the rules for supplying technical equipment.
The amendment was effective on June 25, 2024.
Official sourceWireless
India
India TEC Opens Public Consultations for the Adoption of TSDSI Transposed 3GPP Standards into National Standards
On June 26, 2024, the Telecommunication Engineering Centre (TEC) released Notice No: 19-17/2024-STD/TEC. This notice invites public comments for the adoption of TSDSI transposed 3GPP standards for Release 13 to 17 as an outcome of TSG#102 into National Standards by TEC.
All the stakeholders were requested to e-mail their comments until July 26, 2024.
Official sourceWireless
Dominican Republic
Dominican Republic INDOTEL Publishes New Regulatory Fees
On June 3, 2024, the Dominican Institute of Telecommunications (INDOTEL) approved Resolution No. 049-2024. This initiative reviewed and modified the rates for processing services of the body. This became effective on the date of its approval.
Official sourceWireless
EU
Europe CEPT Updates Recommendations to Deal with Short Range Devices
On June 7, 2024, the European Conference of Postal and Telecommunications Administrations (CEPT) published amendments to ERC Recommendation 70-03 relating to the use of Short Range Devices (SRD). This recommendation sets out the CEPT position on common spectrum which can be designated for SRD applications.
Official sourceWireless
Oman
Oman TRA Announces Gradual Shutdown of 3G Services
On July 1, 2024, the Telecommunications Regulatory Authority (TRA) of Oman announced that they will gradually stop 3G services starting this month.
Official sourceWireless
Malaysia
Malaysia SIRIM Issues Announcement on Cancellation of the Use of FSS Earth Station and UWB Communication Devices in the 3400 to 3700 MHz Band
On July 1, 2024, the Standard and Industrial Research Institute of Malaysia (SIRIM) issued Announcement Ref. No.: SQASI/CMCS/1/24/0006 Notice of Cancellation on the usage of Fixed-Satellite Service Earth Station(s) and Ultra-Wideband Communication Device(s) (3400 MHz to 3700 MHz).
Official sourceWireless
Malawi
Malawi MACRA Issues Notice on Plan to Implement Type Approval Regulations
On April 10, 2024, the Malawi Communications Regulatory Authority (MACRA) issued a public notice on implementation of type approval regulations.
Official sourceWireless
India
India TEC Further Updates Requirements for Documents/Exemption for Certain Parameters of PON Family of Broadband Equipment under MTCTE
On July 1, 2024, the Telecommunications Centre (TEC) of India released Notification No. 5-5/2024-TC/TEC - Requirement of documents/exemption against certain parameters of ER of ‘PON Family of Broadband Equipment’ under MTCTE. This is a updates for the previous notification letter No. 5-5/2021-TC/TEC
issued on Jan. 23, 2024.
Official sourceWireless
India
India TEC Issues Notification for Exemptions for GPS Parameters of Applicable ERs under MTCTE
On July 1, 2024, the Telecommunications Centre (TEC) of India released Notification No. 5-5/2024-TC/TEC - Exemption pertaining to GPS parameters of applicable ERs under MTCTE.
Official sourceWireless
Egypt
Egypt's NTRA Updates their Type Approval Procedures
On July 2024, the National Telecommunications Regulatory Authority of Egypt updated their Type Approval Procedure for the second time this year. Additional provision on the ISO Certification requirement for all 3 schemes is introduced. This new update was already in forced.
Official sourceWireless
Philippines
Philippines NTC Publishes Frequency Bands for the Use and Operation of SRDs
On July 5, 2024, the National Telecommunications Commission of the Philippines published under Memorandum Circular No. 002-07-2024 the amendment of Section 2 of the Frequency Bands for the Use and Operation of Short Range Devices (SRDs) (Memorandum Circular No. 03-05-2007).
Official sourceWireless
Paraguay
Paraguay CONATEL Publishes Modified National Frequency Allocation Plan
On July 3, 2024, the National Telecommunications Commission (CONATEL) of Paraguay published Directory Resolution No 1752/2024 in which the National Frequency Allocation Plan (PNAF) of the Republic of Paraguay is Modified with the National Note PRG-71 and the Deletion of National Note PRG-75.
Official sourceWireless
Vietnam
Vietnam MIC Announces Roadmap on Shutdown of 2G Services
On July 5, 2024, the Ministry of Information and Communications (MIC) of Vietnam issued a press release on roadmap to stop 2G mobile technology.
Official sourceWireless
Pakistan
Pakistan PTA Opens Public Consultation on RLAN Regulatory Framework
On July 5, 2024, the Pakistan Telecommunication Authority (PTA) opened a public consultation on RLAN Regulatory Framework-2024 v-1.0.
Comments were accepted until July 21, 2024.
Please contact your local UL Solutions office for more information.Wireless
Taiwan
Taiwan NCC Publishes Revised Application Procedure and Format in the Telecommunications Terminal Equipment and Controlled Radio Frequency Equipment Inspection and Management Measures
On July 2, 2024, the National Communications Commission (NCC) of Taiwan published the following:
- Amend the Application Procedures and Form Format Specified in the Telecommunications Terminal Equipment Inspection and Management Measures, and take effect from the announcement date (Document number: 11365016500)
- Amend the Application Process and Form Format Specified in the Telecommunications Controlled Radio Frequency Equipment Inspection and Management Measures, and take effect from the announcement date (Document number: 11365016501)
Official sourceWireless
Palestine
Palestine MTIT Changes Name to MTDE
The Ministry of Telecom and Information Technology (MTIT) of Palestine recently changed its name to the Ministry of Telecommunications and Digital Economy (MTDE).
Please contact your local UL Solutions office for more information.Wireless
USA
USA FCC Opens Public Consultation on the Proposed Rule for the Security of Telecommunications Certification Bodies, Measurement Facilities, and the Equipment Authorization Program
On July 5, 2024, the Federal Communications Commission (FCC) of USA opened a public consultation on Promoting the Integrity and Security of Telecommunications Certification Bodies, Measurement Facilities, and the Equipment Authorization Program (ET Docket No. 24-136; FR ID 228432).
Comments are accepted until Sept. 3, 2024, and must be submitted thru the FCC website.
Official sourceWireless
Vietnam
Vietnam MIC Publishes Draft Regulation on Specific Absorption Levels for Portable and Wearable Radio Equipment
On July 8, 2024, the Vietnam Ministry of Information and Communications (MIC) opened a public consultation on the draft of the National Technical Regulation on Specific Absorption Levels for Portable and Wearable Radio Equipment (QCVN 134:2024/BTTTT).
Comments are accepted until Sept. 8, 2024 and must be submitted to this link.
Official sourceWireless
Taiwan
Taiwan MODA Opens Public Consultation on Amendment to the Radio Frequency Allocation Plan
On July 9, 2024, the Ministry of Digital Affairs (MODA) of Taiwan opened a public consultation on the draft amendment of the Radio Frequency Allocation Plan.
Comments are accepted until Sept. 7, 2024, and must be submitted to tim5031491@moda.gov.tw.
Official sourceWireless
Malaysia
Malaysia MCMC Announces Extended Interim Type Approval for IPv6 Cellular Equipment Without WiFi Interface
On July 11, 2024, the Standard and Industrial Research Institute of Malaysia (SIRIM) issued Announcement Ref. No.: SQASI/CMCS/1/24/0007 on the Updates on Certification of IPv6 Over Cellular Equipment Without WiFi Interface (Under Terminal/Host) or IPv6 Equipment Over Other Medium (E.g: Fiber Optic Etc. Except Ethernet LAN) Under Interim Type Approval.
Official sourceWireless
Luxembourg
Luxembourg RSPG Releases Questionnaire on Long-Term Vision for the Upper 6 GHz Band
On July 12, 2024, the Radio Spectrum Policy Group (RSPG) of Luxembourg released a questionnaire on long-term vision for the upper 6 GHz band.
Responses are accepted until Aug. 20, 2024 and must be submitted to cnect-RPSG@ec.europa.eu.
Official sourceWireless
Algeria
Algeria ARPCE Releases and Amendment to the Approval Procedure of Terminal Equipment and Radio Installations
On June 25, 2024, the Postal and Electronic Communications Regulatory Authority (ARPCE) of Algeria released Decision No. 04/PC/ARPCE/2024 of June 25, 2024 Amending Decision No. 28 P/PC/ARPCE/2019 of Oct. 16, 2019 relating Approval Procedure for Terminal Equipment and Radio Electric Installations Intended to be Connected to a Network of Electronic Communications Open to the Public. The approval procedure form was modified.
Official sourceWireless
Thailand
Thailand NBTC Publishes Technical Standards for FM Radio Broadcasting Transmitter
On June 21, 2024, the Office of the National Broadcasting and Telecommunications Commission (NBTC) published the Technical Standards FM Radio Broadcasting Transmitter (NBTC TS 3001-2567).
Official sourceWireless
Thailand
Thailand NBTC Publishes Radio Frequency Plan for FM Broadcasting Business
On June 21, 2024, the Office of the National Broadcasting and Telecommunications Commission (NBTC) published the Radio Frequency Plan FM Broadcasting Business (NBTC Phor 101 - 2567).
Official sourceWireless
Brazil
Brazil ANATEL Opens Public Consultation for Updating Approval Requirements for Devices that Operates with 3G Technology or Lower
On July 12, 2024, the National Telecommunications Agency (ANATEL) of Brazil announced Public Consultation No. 36 Restriction on the approval of equipment operating only with 3G or lower. This will disallow certification of new equipment that only supports older technologies.
Comments are accepted until Sept. 19, 2024.
Official sourceWireless
South Africa
South Africa Reopens Request for Information for Systems Operating in 3800-4200 MHz and 5925-6425 MHz Frequency Bands
On July 12, 2024, the Independent Communications Authority of South Africa (ICASA) re-opened Request for Information Regarding Systems Operating in the Frequency Bands 3800 to 4200 MHz and 5295 to 6425 MHz under Notice No. 5028 of 2024 Government Gazette No. 50924.
Submissions were accepted until July 26, 2024.
Official sourceWireless
Malaysia
Malaysia MCMC Publishes Technical Code on Test Suite for Digital Terrestrial Television Broadcast Service Receiver
On April 4, 2024, the Malaysian Communications and Multimedia Commission (MCMC) published the Technical Code Digital Terrestrial Television Broadcast Service Receiver - Common Test Suite (Third Revision) (MCMC MTSFB TC T011:2024).
Official sourceWireless
Oman
Oman TRA Publishes Regulations for Regulating and Approving Telecommunications Devices
On July 17, 2024, the Telecommunications Regulatory Authority (TRA) of Oman published Regulations for Regulating and Approving Telecommunications Devices.
Official sourceWireless
India
India TEC Releases Notification Regarding MTCTE Certification of 5G Core Nodes
On July 22, 2024, the Telecommunications Centre (TEC) of India released F.No. 6-6/2024-TC/TEC - MTCTE Certification of 5G Core Nodes. For the completely Virtualized/Software based 5G Core Nodes, it will issue the provisional MTCTE certificates and will be valid for two years.
Official sourceWireless
Brazil
Brazil ANATEL Updates the Conditions for Operational Requirements in Satellite Communication System
On July 15, 2024, the National Telecommunications Agency (ANATEL) released Public Consultation No. 37 which updates the annex to Act No. 9,523, of Oct. 27, 2021. Specifically, the conditions regarding the use of radio frequency bands assigned to satellite radiocommunication services from the Technical and
Operational Requirements for Satellite Communication Systems.
The consultation was closed on July 24, 2024.
Official source, Official sourceWireless
Mexico
Mexico IFT Updates List of Accredited and Authorized Laboratories
On July 24, 2024, the Federal Telecommunications Institute (IFT) of Mexico updated its list of national accredited and authorized third party testing laboratories.
Official sourceWireless
Canada
Canada ISED Publishes Certification Requirements for Personal Communications Service Equipment Operating in the Bands 1850-1915 MHz and 1930-1995 MHz
On July 24, 2024, the Department of Innovation, Science and Economic Development Canada (ISED) published RSS-133, issue 7, Personal Communications Service Equipment Operating in the Bands 1850-1915 MHz and 1930-1995 MHz.
Official sourceWireless
Canada
Canada ISED Publishes Certification Requirements for Licensed Wireless Microphones Including WMAS
On July 26, 2024, the Department of Innovation, Science and Economic Development Canada (ISED) published RSS-123 Issue 5, Licensed Wireless Microphones.
Official sourceWireless, EMC, Safety
India
India TEC Further Extends Timelines for Mandatory Certification Date and Acceptance of Test Reports for Five Products for MTCTE
On July 1, 2024, the Telecommunications Centre (TEC) of India released notification F.No. 5-2/2024-TC/TEC - Extension of mandatory certification date for 05 products (ERs) notified under Phase-III, IV and V of MTCTE. Listed products notified under MTCTE Phase-III, IV and V is now extended until Oct. 1, 2024. While the last date for acceptance of test reports issued by labs accredited by International Laboratory Accreditation Cooperation (ILAC) signatories has also been extended to Sept. 30, 2024 for another five listed products. This notification basically amends the previous extension notification on April 1, 2024.
Official sourceWireless, EMC, Safety, Cyber Security
Brazil
Brazil ANATEL Approves Technical Requirements of Product Type Interactive Screens for Educational Use
On June 28, 2024, the National Telecommunications Agency (ANATEL) of Brazil released Act No. 9960. This approves the technical requirements for assessing the conformity of the product type interactive screen for educational use and updates the Telecommunications Product Reference List.
This Act will be enforced on Dec. 25, 2024.
Official sourceWireless, Safety, EMC
India
India TEC Issues Notification for Clarifying the Addition of Associated Model for Already Certified Equipment
On July 18, 2024, the Telecommunications Centre (TEC) of India released F.No.1-2/2024-TC/TEC, Addition of Associated Model(s) in already Certified Equipment under MTCTE to clarify that Associated Model (s) can be added to the already Certified Equipment under MTCTE in according with the Procedure for Mandatory Testing and Certification of Telecommunication Equipment (TEC 93009:2024).
Official sourceWireless, Safety, EMC, RoHS, Chemicals
Tanzania
Tanzania TCRA Publishes Technical Specifications for SRD
On June 25, 2024, the Tanzania Communications Regulatory Authority (TCRA) published the Minimum Technical Specifications for Short Range Devices (SRDs) (TCRA/TS015 Version 1.0 - June 2024)
Official source- June 2024 updates
Regulation
Country
Summary
Consumer Products USA U.S. CPSC to Host eFiling Voluntary Stage Training Session
The U.S. Consumer Product Safety Commission will be hosting an eFiling Voluntary Stage Training Session on Wednesday, September 4th at 2pm ET.
This training session is designed for parties interested in eFiling and will cover eFiling basics, certification requirements, roles and responsibilities, and best practices.
eFiling is a CPSC initiative under which importers of regulated consumer products will electronically file (eFile) data elements from a certificate of compliance with U.S. Customs and Border Protection (CBP), via a Partner Government Agency (PGA) Message Set for products imported into the US under CPSC jurisdiction.Chemicals Canada Canada Issues Notice with respect to certain per- and polyfluoroalkyl substances (PFAS)
On July 27, Canada’s Department of the Environment has issued Canada Gazette, Part I, Volume 158, Number 30: Supplement - Notice with respect to certain per- and polyfluoroalkyl substances (PFAS).
This notice requires relevant companies to provide this information on per- and polyfluoroalkyl substances (PFAS) listed in Schedule 1 of the notice (hereinafter referred to as “Schedule 1”) for the 2023 calendar year before January 29, 2025:- the name of the person;
- the address;
- the business number (Canada Revenue Agency)
- the name, email and phone number of an individual authorized to act on behalf of the person; and
- a declaration that the information is accurate and complete. The information shall be submitted to the Minister of the Environment using the online reporting system Environment and Climate Change Canada’s Single Window.
Juvenile Products European Union CEN Publishes EN 1888-3:2024 Child care articles - Wheeled child conveyances - Part 3: Pushchairs intended for leisure sport activities
On July 11, the European Committee for Standardization (CEN) published EN 1888-3:2024 Child care articles - Wheeled child conveyances - Part 3: Pushchairs intended for leisure sport activities.
This document specifies the safety requirements of pushchairs when used for running/jogging or skating (excluding ice skating), intended for the transport of one or two children up to 15 or 22 kg each.
Pushchairs intended to transport the carer while pushing (e.g. the combination of longboard and stroller) are excluded from the scope of this document.
This document applies in conjunction with and in addition to the European standards EN 1888 1:2018+A1:2022 or EN 1888-2:2018+A1:2022 and it cannot be used separately.Textiles, Apparel and Footwear Global ISO Publishes ISO 20701:2024 Leather — Tests for colour fastness — Colour fastness to saliva
On August 8th, the International Organization for Standardization (ISO) has published ISO 20701:2024 Leather — Tests for colour fastness — Colour fastness to saliva
This document specifies a method for determining the colour fastness to saliva of all kinds of leathers, independent of the colouring procedure applied.
The method uses an artificial saliva solution to simulate whether colouring materials can migrate from leather to the mouth or to the mucous membranes.Juvenile Products European Union CEN Publishes EN 14988:2017+A2:2024 Children's high chairs - Requirements and test methods
On April 24, the European Committee for Standardization (CEN) published EN 14988:2017+A2:2024 Children's high chairs - Requirements and test methods.
This European Standard specifies safety requirements for free standing children's high chairs that elevate children to dining table height usually for the purposes of feeding or eating. Children's high chairs are for children up to 3 years of age who are capable of sitting unaided. With the exception of special high chairs for medical purposes, this standard applies to children's high chairs for domestic and non-domestic use.
The latest amendment (A2) to the standard contains the following main modifications to the previous versions:- complete review of the standard in a hazard base format;
- modifications necessary to comply with European Decision 2013/121/EU (safety requirements to be met by European standards for certain seats for children) ;
- addition of a dynamic strength test;
- inclusion of specific requirements for high chair with more than two castors/wheels;
- improvement of restraint system requirements to require a passive crotch restraint for products with a horizontal component in front of the baby.
Textiles, Apparel and Footwear USA – Utah Utah Releases Notice of Exemption for Slippers – Filling Material Listing Requirements
Effective immediately from June 24, 2024, the Department of Agriculture and Food of Utah has announced that slippers containing filling material in the top portion are exempt from listing the filling material in the bottom portion. This notice is intended to streamline the compliance process and reduce the labeling burden on manufacturers, while still ensuring transparency and consumer safety.
Previously, regulations required that any filling material used in both the top and bottom portions of slippers be explicitly listed on the textile label.
All other labeling requirements remain unchanged. Manufacturers must ensure that the filling material in the top portion is accurately listed on the textile label.Food Contact Materials Jamaica Jamaica Enacts the Trade (Plastic Packaging Materials Prohibition) (Amendment) Order, 2024
On July 11, Jamaica has enacted The Trade (Plastic Packaging Materials Prohibition) (Amendment) Order, 2024.
This Order amends the principal Order the Trade (Plastic Packaging Materials Prohibition) Order, 2018, to update the definitions of ‘Single use plastics’ to include the following:- plastic food containers made wholly or in part of polyethylene, polypropylene or polylactic acid and prohibits their use, but does not apply until the 11th day of July 2024, to the importation of plastic food containers; until the 9th day of January 2025, to the distribution of plastic food containers;
- cosmetic care or personal care products to which plastic microbeads or microplastics have been intentionally added.
Chemicals, Textiles, Apparel and Footwear Jordan Jordan Releases FDJS 2235-1:2023 Textiles - Part 1: Chemicals content requirements in textile products
The Jordan Standards and Metrology Organization (JSMO) has released FDJS 2235-1:2023 Textiles - Part 1: Chemicals content requirements in textile products.
This Jordanian standard specifies requirements for the content of chemicals in textile products in the field of safety, health and environment. Which are in direct or indirect contact with the human body, in addition to its accessories.
This Jordanian regulation shall apply on the following textile products: products containing at least 80 % by weight of textile fibres, furniture, umbrella and sunshade coverings containing at least 80 % by weight of textile components, and other textile components.Food Contact Materials European Union Council of Europe Releases Metals and alloys used in food contact materials and articles - Second Edition of the EDQM technical guide
On August 1, 2024, the Council of Europe has published Metals and alloys used in food contact materials and articles - Second Edition of the EDQM technical guide.
Following the adoption of Council of Europe Resolution CM/Res(2020)9, this revised technical guide aims to ensure the safety and suitable quality of food contact materials and articles made from metals and alloys.
The guide includes modified safety data concerning specific release limits (SRLs) for chromium, manganese, thallium and a new section on zirconium and general recommendations for release testing.Chemicals Canada Government of Canada issued Notice on PFAS Reporting Requirements
On July 27, 2024, a notice has been published in Canada Gazette, Part I, to request information on certain per- and polyfluoroalkyl substances (PFAS) on their own or in mixtures, products or manufactured items related to the calendar year 2023, with the intention to assess their actual or potential toxicity and to decide whether and/or how to control the risks posed by these substances.
Reporting requirements will apply to 312 PFAS included under Schedule I according to:- Total quantity imported/manufactured of PFAS substances on their own and PFAS-containing mixtures, products or manufactured items;
- PFAS substances type, whether included in Schedule 1 Part 1, Part 2 or Part 3;
- Category or intended use of the manufactured item; and
- PFAS concentration in the manufactured item.
Consumer Products, Sustainability European Union EC Publishes Regulation (EU) 2024/1781 on establishing a framework for the setting of ecodesign requirements for sustainable products
On June 28, the European Commission (EC) published Regulation (EU) 2024/1781 on establishing a framework for the setting of ecodesign requirements for sustainable products.
This Regulation establishes a framework for the setting of ecodesign requirements that products have to comply with to be placed on the market or put into service, with the aim of improving the environmental sustainability of products in order to make sustainable products the norm and to reduce the overall carbon footprint and environmental footprint of products over their life cycle, and of ensuring the free movement of sustainable products within the internal market.
This Regulation also establishes a digital product passport, provides for the setting of mandatory green public procurement requirements and creates a framework to prevent unsold consumer products from being destroyed. This Regulation applies to any physical goods that are placed on the market or put into service, including components and intermediate products, although it does not apply to: food, feed, medicinal products, veterinary medicinal products, living plants, animals and micro-organisms, products of human origin, products of plants and animals relating to their future reproduction and vehicles. The new regulation repealed the old Ecodesign Directive (Directive 2009/125/EC) on 18 July 2024.Chemicals Japan Japan Issues Cabinet Order Partially Amending the Enforcement Order of the Law Concerning the Examination and Regulation of Manufacture, etc. of Chemical Substances
On July 10, Japan’s Ministry of Health, Labour and Welfare and Ministry of Environment has issued Government Decree No. 244 - Cabinet Order Partially Amending the Enforcement Order of the Law Concerning the Examination and Regulation of Manufacture, etc. of Chemical Substances.
According to the Cabinet Order, some products like Clothing with oil- and water-repellent properties containing PFOA-related substances shall not be imported to Japan.
The import ban will apply form January 10, 2025.
Moreover it designates PFOA-related compounds, including perfluorooctyl iodide (CAS 507-63-1) and 8:2 fluorotelomer alcohol (CAS 678-39-7), as Class 1 Specified Chemical Substances from January 10, 2025.Juvenile Products Australia Australia Issues New Safety Standard for Infant Sleep Products and Information Standard for Infant Products.
On July 18, Product Safety Australia issued a new safety standard for infant sleep products and a new information standard for infant products.- Consumer Goods (Infant Sleep Products) Safety Standard 2024
- The new mandatory safety standard applies to all infant sleep products, including products such as rockers, bassinets, household cots and folding cots, and incorporates requirements from the repealed mandatory standards for household cots and folding cots. It provides requirements relevant to design, construction and performance including testing requirements for infant sleep products.
- Consumer Goods (Infant Products) Information Standard 2024
- The mandatory information standard applies to infant sleep products and inclined non-sleep products and requires warnings and safety information to be supplied with the product. This will provi