월드와이드
북미
유럽
미국
덴마크
프랑스
독일
이탈리아
네덜란드
폴란드
스웨덴
스위스
영국
중남미
아시아 태평양
아르헨티나
브라질
멕시코
호주
인도
말레이시아
뉴질랜드
태국
싱가포르
제품을 제조하여 판매하거나, 구매하여 소비하는 모든 사람들이 제품에 대해 어떻게 느끼는지를 반영하는 전체적인 집단 의식인 제품 의식구조에 대해 자세히 알아봅시다.
자세히
UL Advantage는 UL 인증의 입증된 장점에 대해 더욱 빠르고 스마트하며 유연한 경로를 제공하는 안전 인증에 대한 혁신적인 접근법입니다.
자세히
안전하고 적합한 제품을 세계 시장에 판매할 수 있도록 지원합니다.
자세히
계속해서 증가하고 있는 지속 가능성 영역에 대해 광범위한 서비스를 제공합니다.
자세히
웰빙(well-being)에 필수적인 중요 시스템에 UL의 기술, 안전 및 성능 전문성을 활용합니다.
자세히
세계적인 공급망에서 요구되는 제품 시험과 평가 서비스를 제공합니다.
자세히
교육, 자문 서비스 및 통찰력있는 리더십을 통해 기업에 경쟁력을 제공해 드립니다.
자세히
Share

Rain-tight compression-type EMT fittings

UL offers Listing service for rain-tight compression-type EMT fittings under the product category Electrical Metallic Tubing (EMT) Fittings (FKAV) located on page 33 of the 2005 General Information Directory for Electrical Equipment (White Book).

UL recently conducted a study to determine the reliability of rain-tight compression fittings to consistently comply with the wet location test criteria. Based on the results, UL initiated a more stringent follow-up test program to verify these products consistently exclude water to maintain their rain-tight marking.

As of March 2002, manufacturers of UL Listed rain-tight (wet location) compression type EMT fittings were required to comply with the more stringent follow-up test requirements. If they did not comply, they were no longer authorized to designate their UL Listed fittings with the rain-tight marking.

Several manufacturers have Listing up to 2 and 3 inch trade size

As of June 2005, several manufacturers are authorized to mark their Listed compression type EMT fittings with the rain-tight marking up to 2 inch trade size. At least one manufacturer has up to 3 inch trade size fittings Listed for rain-tight or wet locations.

These fittings are typically provided with additional gaskets, sealing or "O" rings, or additional assembly instructions that must be followed to exclude water. The instructions on the carton must be followed for proper installation. Look for the rain-tight or wet locations marking on the container and the UL Mark on the fitting.

The availability of rain-tight fittings may change as manufacturers redesign their fittings to comply with UL's follow-up rain-tight testing. It is imperative to always look for the proper marking on the product and container. If the product is not marked with the UL Listing Mark, and the container is not marked rain-tight or wet locations, then the fittings have not been Listed for rain-tight or wet-location applications. This page will continue to be updated as new rain-tight Listings are promulgated.