월드와이드
북미
유럽
미국
덴마크
프랑스
독일
이탈리아
네덜란드
폴란드
스웨덴
스위스
영국
중남미
아시아 태평양
아르헨티나
브라질
멕시코
호주
인도
말레이시아
뉴질랜드
태국
싱가포르
제품을 제조하여 판매하거나, 구매하여 소비하는 모든 사람들이 제품에 대해 어떻게 느끼는지를 반영하는 전체적인 집단 의식인 제품 의식구조에 대해 자세히 알아봅시다.
자세히
UL Advantage는 UL 인증의 입증된 장점에 대해 더욱 빠르고 스마트하며 유연한 경로를 제공하는 안전 인증에 대한 혁신적인 접근법입니다.
자세히
안전하고 적합한 제품을 세계 시장에 판매할 수 있도록 지원합니다.
자세히
계속해서 증가하고 있는 지속 가능성 영역에 대해 광범위한 서비스를 제공합니다.
자세히
웰빙(well-being)에 필수적인 중요 시스템에 UL의 기술, 안전 및 성능 전문성을 활용합니다.
자세히
세계적인 공급망에서 요구되는 제품 시험과 평가 서비스를 제공합니다.
자세히
교육, 자문 서비스 및 통찰력있는 리더십을 통해 기업에 경쟁력을 제공해 드립니다.
자세히
Share

UL investigates field reports involving Omega sprinklers; recommends testing of field samples

NOTE: This information is from a previously printed press release, newsletter, or other dated document. It is presented here for archival purposes only.

NORTHBROOK, Ill. -- Underwriters Laboratories Inc. (UL) is investigating field reports indicating that higher than expected water pressures have been required to operate some Central Sprinkler Company "Omega Series" sprinklers. Laboratory testing conducted by UL has confirmed that the operating pressures measured for some of the samples taken from commercial field installations exceeded the water pressure available for the installation and, under some circumstances, could affect the intended discharge of water. At this time, operation pressure test results indicate that the problems may be site specific.

"Omega Series" sprinklers are UL Listed. UL has been actively conducting a comprehensive investigation of the cause(s) of these occurrences. Until this investigation is completed, UL recommends that representative sprinkler samples be taken from existing sprinkler systems incorporating the following Omega Series models: C-1; C-1A; C-1A PRO; C-1A PRO ID; EC-20; EC-20A; EC-20 AID; HEC-12; HEC-12 ID; HEC-12 PRO; HEC-12A PRO; HEC-12 RES; HEC-20; HEC-20 ID; R-1; R-1A; R-1M; AC; M and Flow Control, so that operational testing can be conducted by Central Sprinkler Company or UL.

Central Sprinkler has indicated that the field reports are related to steel piping systems. Not all of these models have been reported to experience high operating pressures; however, UL recommends that samples of the sprinklers be tested.

Instructions on the proper removal and packaging procedures for taking samples from existing sprinkler systems must be obtained from Mr. Andy Post at Central Sprinkler Company (phone: +1-215-362-0700) before samples can be submitted for testing. Once the samples have been properly removed and packaged according to the instructions, they can be sent to either Andy Post at Central Sprinkler Company, 451 N. Cannon Ave., Lansdale, PA 19446, or to Mr. Kerry Bell at Underwriters Laboratories Inc., 333 Pfingsten Rd., Northbrook, IL 60062 for operational testing.