グローバル
北米
ヨーロッパ
米国
デンマーク
フランス
ドイツ
イタリア
オランダ
ポーランド
スウェーデン
スイス
英国
中南米
アジア太平洋
アルゼンチン
ブラジル
メキシコ
オーストラリア
インド
マレーシア
ニュージーランド
タイ
シンガポール
製品に対する考え方とは、その製品に対して世界の人々がどう感じているかが集約された認識や意識です。その製品の製造者、販売者、購入者、消費者であるかは関係ありません。
詳細
UL Advantageは、お客様がよりスピーディに賢く、柔軟にUL認証のメリットを享受することを可能にする、革新的な安全認証取得方法です。
詳細
認証を受けた安全な製品のグローバル市場進出をサポートします。
詳細
急成長中の環境・サステナビリティの分野において幅広いサービスを提供します。
詳細
技術、安全、性能のエキスパートであるULが、私たちの健康に欠かすことのできない様々な機器、システムを支えています。
詳細
グローバル・サプライチェーンで必要な製品試験/評価を実施します。
詳細
各種セミナーやアドバイザリー(技術相談・情報提供)サービス、ソート・リーダーシップを通じ、ビジネスの競争力強化を支援します。
詳細
Share

Rain-tight compression-type EMT fittings

UL offers Listing service for rain-tight compression-type EMT fittings under the product category Electrical Metallic Tubing (EMT) Fittings (FKAV) located on page 33 of the 2005 General Information Directory for Electrical Equipment (White Book).

UL recently conducted a study to determine the reliability of rain-tight compression fittings to consistently comply with the wet location test criteria. Based on the results, UL initiated a more stringent follow-up test program to verify these products consistently exclude water to maintain their rain-tight marking.

As of March 2002, manufacturers of UL Listed rain-tight (wet location) compression type EMT fittings were required to comply with the more stringent follow-up test requirements. If they did not comply, they were no longer authorized to designate their UL Listed fittings with the rain-tight marking.

Several manufacturers have Listing up to 2 and 3 inch trade size

As of June 2005, several manufacturers are authorized to mark their Listed compression type EMT fittings with the rain-tight marking up to 2 inch trade size. At least one manufacturer has up to 3 inch trade size fittings Listed for rain-tight or wet locations.

These fittings are typically provided with additional gaskets, sealing or "O" rings, or additional assembly instructions that must be followed to exclude water. The instructions on the carton must be followed for proper installation. Look for the rain-tight or wet locations marking on the container and the UL Mark on the fitting.

The availability of rain-tight fittings may change as manufacturers redesign their fittings to comply with UL's follow-up rain-tight testing. It is imperative to always look for the proper marking on the product and container. If the product is not marked with the UL Listing Mark, and the container is not marked rain-tight or wet locations, then the fittings have not been Listed for rain-tight or wet-location applications. This page will continue to be updated as new rain-tight Listings are promulgated.