| Standard | Title |
| IEC 60079 | Explosive Atmospheres -- Part 0: Equipment - General Requirements |
| IEC 60079-1 | Explosive Atmospheres -- Part 1: Equipment Protection by Flameproof Enclosures "d" |
| IEC 60079-2 | Explosive Atmospheres -- Part 2: Equipment Protection by Pressurized Enclosures "p" |
| IEC 60079-3 | Electrical Apparatus for Explosive Gas Atmospheres -- Part 3: Spark-Test Apparatus for Intrinsically-Safe Circuits |
| IEC 60079-4 | Electrical Apparatus for Explosive Gas Atmospheres -- Part 4: Method of Test for Ignition Temperature |
| IEC 60079-5 | Explosive Atmospheres -- Part 5: Equipment Protection by Powder Filling "q" |
| IEC 60079-6 | Explosive Atmospheres -- Part 6: Equipment Protection by Oil-Immersion "o" |
| IEC 60079-7 | Explosive Atmospheres -- Part 7: Equipment Protection by Increased Safety "e" |
| IEC 60079-9 | Electrical Apparatus for Explosive Gas Atmospheres -- Part 9: Marking |
| IEC 60079-10 | Electrical Apparatus for Explosive Gas Atmospheres -- Part 10: Classification of Hazardous Areas |
| IEC 60079-11 | Explosive Atmospheres -- Part 11: Equipment Protection by Intrinsic Safety "i" |
| IEC 60079-14 | Explosive Atmospheres -- Part 14: Electrical Installations Design, Selection and Erection |
| IEC 60079-15 | Electrical Apparatus for Explosive Gas Atmospheres -- Part 15: Type of Protection "n" |
| IEC 60079-17 | Explosive Atmospheres -- Part 17: Electrical Installations Inspection and Maintenance |
| IEC 60079-18 | Electrical Apparatus for Explosive Gas Atmospheres -- Part 18: Encapsulation "m" |
| IEC 60079-19 | Explosive Atmospheres -- Part 19: Equipment Repair, Overhaul and Reclamation |
| IEC 60079-25 | Electrical Apparatus for Explosive Gas Atmospheres -- Part 25: Intrinsically Safe Systems |
| IEC 60079-26 | Explosive Atmospheres -- Part 26: Equipment with Equipment Protection Level (EPL) GA |
| IEC 60079-27 | Explosive Atmospheres -- Part 27: Fieldbus Intrinsically Safe Concept (FISCO) |
| IEC 60079-28 | Explosive Atmospheres -- Part 28: Protection of Equipment and Transmission Systems using Optical Radiation |
| IEC 60079-29-1 | Explosive Atmospheres -- Part 29-1: Gas Detectors -- Performance Requirements of Detectors for Flammable Gases |
| IEC 60079-29-2 | Explosive Atmospheres -- Part 29-2: Gas Detectors - Selection, Installation, Use and Maintenance of Detectors for Flammable Gases and Oxygen |
| IEC 60079-30-1 | Explosive Atmospheres -- Part 30-1: Electrical Resistance Trace Heating - General and Testing Requirements |
| IEC 60079-30-2 | Explosive Atmospheres -- Part 30-2: Electrical Resistance Trace Heating -- Application Guide for Design, Installation and Maintenance |
| IEC 61241-0 | Electrical Apparatus for use in the Presence of Combustible Dust -- Part 0: General Requirements |
| IEC 61241-1 | Electrical Apparatus for use in the Presence of Combustible Dust -- Part 1: Protection by Enclosures "tD" |
| IEC 61241-2-1 | Electrical Apparatus for use in the Presence of Combustible Dust -- Part 2: Test Methods Section 1: Methods for Determining the Minimum Ignition Temperatures of Dust |
| IEC 61241-2-3 | Electrical Apparatus for use in the Presence of Combustible Dust -- Part 2: Test Methods Section 3: Method for Determining Minimum Ignition Energy of Dust/Air Mixtures |
| IEC 61241-4 | Electrical Apparatus for use in the Presence of Combustible Dust -- Part 4: Type of Protection "pD" |
| IEC 61241-10 | Electrical Apparatus for use in the Presence of Combustible Dust -- Part 10: Classification of Areas where Combustible Dusts are or may be Present |
| IEC 61241-11 | Electrical Apparatus for use in the Presence of Combustible Dust -- Part 11: Protection by Intrinsic Safety "iD" |
| IEC 61241-14 | Electrical Apparatus for use in the Presence of Combustible Dust -- Part 14: Selection and Installation |
| IEC 61241-17 | Electrical Apparatus for use in the Presence of Combustible Dust -- Part 17: Inspection and Maintenance of Electrical Installations in Hazardous Areas (other than mines) |
| IEC 61241-18 | Electrical Apparatus for use in the Presence of Combustible Dust -- Part 18: Protection by Encapsulation "mD" |
| IEC 61779-1 | Electrical apparatus for the detection and measurement of flammable gases -- Part 1: General requirements and test methods |
| IEC 61779-2 | Electrical apparatus for the detection and measurement of flammable gases -- Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air |
| IEC 61779-3 | Electrical apparatus for the detection and measurement of flammable gases -- Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air |
| IEC 61779-4 | Electrical apparatus for the detection and measurement of flammable gases -- Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit |
| IEC 61779-5 | Electrical apparatus for the detection and measurement of flammable gases -- Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100% gas |
| IEC 61779-6 | Electrical apparatus for the detection and measurement of flammable gases -- Part 6: Guide for the Selection, Installation, Use and Maintenance of Apparatus for the Detection and Measurement of Flammable Gases |
| IEC 62013-1 | Caplights for use in Mines Susceptible to Firedamp -- Part 1: General Requirements -- Construction and Testing in Relation to the Risk of Explosion |
| IEC 62013-2 | Caplights for use in Mines Susceptible to Firedamp -- Part 2: Performance and Other Safety-Related Matters |
