European hazardous locations certification documents
Explosive Atmospheres -- Part 2: Equipment Protection by Pressurized Enclosures "p" Electrical Apparatus for Explosive Gas Atmospheres -- Part 10: Classification of Hazardous Areas Electrical Apparatus for Explosive Gas Atmospheres Part 14: Electrical Installations in Hazardous Areas (other than mines) Explosive Atmospheres -- Part 30-1: Electrical Resistance Trace Heating -- General and Testing Requirements Electrical Apparatus for use in the Presence of Combustible Dust -- Part 2: Test Methods Section 2.2 Method for Determining the Electrical Resistivity of Dust in Layers Electrical apparatus for the detection and measurement of flammable gases -- Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5% methane in air Electrical apparatus for the detection and measurement of flammable gases -- Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100% lower explosive limit Caplights for use in Mines Susceptible to Firedamp -- Part 2: Performance and Other Safety-Related Matters
Standard Title EN50015 Electrical apparatus for potentially explosive atmospheres -- Oil immersion "o" EN50017 Electrical apparatus for potentially explosive atmospheres -- Powder filling "q" EN50020 Electrical apparatus for potentially explosive atmospheres -- Intrinsic safety "i" EN50050 Electrical Apparatus for Potentially Explosive Atmospheres --Electrostatic Hand-Held Spraying Equipment EN50053 Part 2 Specification for Selection, Installation and Use of Hand-Held Powder Spray Guns (Energy Limit of 5 mJ) and their Associated Apparatus EN50053 Part 3 Specification for Selection, Installation and Use of Hand-Held Powder Spray Guns (Energy Limit of 0.24 mJ or 5 mJ) and their Associated Apparatus EN 60079-0 Electrical Apparatus for Explosive Gas Atmospheres -- Part 0: General Requirements EN 60079-1 Explosive Atmospheres -- Part 1: Equipment Protection by Flameproof Enclosures "d" EN 60079-2 EN 60079-5 Explosive Atmospheres -- Part 5: Equipment Protection by Powder Filling "q" EN 60079-6 Explosive Atmospheres -- Part 6: Equipment Protection by Oil-Immersion "o" EN 60079-7 Electrical Apparatus for Explosive Gas Atmospheres -- Part 7: Increased Safety "e" EN 60079-10 EN 60079-11 Explosive Atmospheres -- Part 11: Equipment Protection by Intrinsic Safety "i" EN 60079-14 EN 60079-15 Electrical Apparatus for Explosive Gas Atmospheres -- Part 15: Type of Protection "n" EN 60079-17 Explosive Atmospheres -- Part 17: Electrical Installations Inspection and Maintenance EN 60079-18 Electrical Apparatus for Explosive Gas Atmospheres -- Part 18: Encapsulation "m" EN 60079-25 Electrical Apparatus for Explosive Gas Atmospheres -- Part 25: Intrinsically Safe Systems EN 60079-26 Explosive Atmospheres -- Part 26: Equipment with Equipment Protection Level (EPL) GA EN 60079-27 Explosive Atmospheres -- Part 27: Fieldbus Intrinsically Safe Concept (FISCO) EN 60079-29-1 Explosive Atmospheres -- Part 29-1: Gas Detectors -- Performance Requirements of Detectors for Flammable Gases EN 60079-29-2 Explosive Atmospheres -- Part 29-2: Gas Detectors -- Selection, Installation, Use and Maintenance of Detectors for Flammable Gases and Oxygen EN 60079-30-1 EN 60079-30-2 Explosive Atmospheres -- Part 30-2: Electrical Resistance Trace Heating -- Application Guide for Design, Installation and Maintenance EN 61241-0 Electrical Apparatus for use in the Presence of Combustible Dust -- Part 0: General Requirements EN 61241-1 Electrical Apparatus for use in the Presence of Combustible Dust -- Part 1: Protection by Enclosures "tD" EN 61241-2-2 EN 61241-4 Electrical Apparatus for use in the Presence of Combustible Dust -- Part 4: Type of Protection "pD" EN 61241-10 Electrical Apparatus for use in the Presence of Combustible Dust -- Part 10: Classification of Areas where Combustible Dusts are or may be Present EN 61241-11 Electrical Apparatus for use in the Presence of Combustible Dust -- Part 11: Protection by Intrinsic Safety "iD" EN 61241-14 Electrical Apparatus for use in the Presence of Combustible Dust -- Part 14: Selection and Installation EN 61241-17 Electrical Apparatus for use in the Presence of Combustible Dust -- Part 17: Inspection and Maintenance of Electrical Installations in Hazardous Areas (other than mines) EN 61241-18 Electrical Apparatus for use in the Presence of Combustible Dust -- Part 18: Protection by Encapsulation "mD" EN 61779-1 Electrical apparatus for the detection and measurement of flammable gases -- Part 1: General requirements and test methods EN 61779-2 EN 61779-3 Electrical apparatus for the detection and measurement of flammable gases -- Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100% methane in air EN 61779-4 EN 61779-5 Electrical apparatus for the detection and measurement of flammable gases -- Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100% gas EN 62013-1 Caplights for use in Mines Susceptible to Firedamp -- Part 1: General Requirements - Construction and Testing in Relation to the Risk of Explosion EN 62013-2
