全球網站
北美洲
歐洲
美國
丹麥
法國
德國
瑞典
瑞士
英國
拉丁美洲
亞太地區
阿根廷
巴西
墨西哥
澳洲
印度
馬來西亞
紐西蘭
泰國
新加坡
瞭解更多關於產品意識的資訊,也就是全球包括製造商、經銷商、消費者對產品反應出的集體意識。
更多資訊
UL Advantage 是一種革新的安全認證方法,提供更快、更具智慧、更靈活的途徑以享受 UL 認證的好處。
更多資訊
幫助符合安全規範的產品進入全球市場。
更多資訊
為不斷成長的可持續性領域提供廣泛的服務。
更多資訊
將 UL 的工程、安全和效能專業知識應用在對大眾福祉相關的關鍵系統上。
更多資訊
提供全球供應鏈所需的產品測試和評估。
更多資訊
提供培訓、顧問服務及領先思維課程,讓企業獲得競爭優勢。
更多資訊
Share

UL investigates field reports involving Omega sprinklers; recommends testing of field samples

NOTE: This information is from a previously printed press release, newsletter, or other dated document. It is presented here for archival purposes only.

NORTHBROOK, Ill. -- Underwriters Laboratories Inc. (UL) is investigating field reports indicating that higher than expected water pressures have been required to operate some Central Sprinkler Company "Omega Series" sprinklers. Laboratory testing conducted by UL has confirmed that the operating pressures measured for some of the samples taken from commercial field installations exceeded the water pressure available for the installation and, under some circumstances, could affect the intended discharge of water. At this time, operation pressure test results indicate that the problems may be site specific.

"Omega Series" sprinklers are UL Listed. UL has been actively conducting a comprehensive investigation of the cause(s) of these occurrences. Until this investigation is completed, UL recommends that representative sprinkler samples be taken from existing sprinkler systems incorporating the following Omega Series models: C-1; C-1A; C-1A PRO; C-1A PRO ID; EC-20; EC-20A; EC-20 AID; HEC-12; HEC-12 ID; HEC-12 PRO; HEC-12A PRO; HEC-12 RES; HEC-20; HEC-20 ID; R-1; R-1A; R-1M; AC; M and Flow Control, so that operational testing can be conducted by Central Sprinkler Company or UL.

Central Sprinkler has indicated that the field reports are related to steel piping systems. Not all of these models have been reported to experience high operating pressures; however, UL recommends that samples of the sprinklers be tested.

Instructions on the proper removal and packaging procedures for taking samples from existing sprinkler systems must be obtained from Mr. Andy Post at Central Sprinkler Company (phone: +1-215-362-0700) before samples can be submitted for testing. Once the samples have been properly removed and packaged according to the instructions, they can be sent to either Andy Post at Central Sprinkler Company, 451 N. Cannon Ave., Lansdale, PA 19446, or to Mr. Kerry Bell at Underwriters Laboratories Inc., 333 Pfingsten Rd., Northbrook, IL 60062 for operational testing.