全球
北美洲
欧洲
美国
丹麦
法国
德国
瑞典
瑞士
英国
拉丁美洲
亚太地区
阿根廷
巴西
墨西哥
澳大利亚
印度
马来西亚
中国台湾
新西兰
泰国
中国香港
新加坡
深入了解产品意识,也就是全球客户对产品反映出的集体意识,包括生产者和消费者、销售方和购买方。
更多详情
UL Advantage 是进行安全认证的革命性方法,让您能以更快、更智能、更灵活的方式从 UL 认证中获益。
更多详情
将安全、合规的产品推向全球市场。
更多详情
在日益兴起的可持续性业务领域提供多种服务
更多详情
将 UL 在工程、安全和性能方面的专业技术运用于和我们的福祉息息相关的关键系统。
更多详情
按照全球供应链的要求提供产品测试和评估。
更多详情
提供培训和咨询服务以及领先思维课程,让您的企业抢尽竞争先机。
更多详情
Share

UL investigates field reports involving Omega sprinklers; recommends testing of field samples

NOTE: This information is from a previously printed press release, newsletter, or other dated document. It is presented here for archival purposes only.

NORTHBROOK, Ill. -- Underwriters Laboratories Inc. (UL) is investigating field reports indicating that higher than expected water pressures have been required to operate some Central Sprinkler Company "Omega Series" sprinklers. Laboratory testing conducted by UL has confirmed that the operating pressures measured for some of the samples taken from commercial field installations exceeded the water pressure available for the installation and, under some circumstances, could affect the intended discharge of water. At this time, operation pressure test results indicate that the problems may be site specific.

"Omega Series" sprinklers are UL Listed. UL has been actively conducting a comprehensive investigation of the cause(s) of these occurrences. Until this investigation is completed, UL recommends that representative sprinkler samples be taken from existing sprinkler systems incorporating the following Omega Series models: C-1; C-1A; C-1A PRO; C-1A PRO ID; EC-20; EC-20A; EC-20 AID; HEC-12; HEC-12 ID; HEC-12 PRO; HEC-12A PRO; HEC-12 RES; HEC-20; HEC-20 ID; R-1; R-1A; R-1M; AC; M and Flow Control, so that operational testing can be conducted by Central Sprinkler Company or UL.

Central Sprinkler has indicated that the field reports are related to steel piping systems. Not all of these models have been reported to experience high operating pressures; however, UL recommends that samples of the sprinklers be tested.

Instructions on the proper removal and packaging procedures for taking samples from existing sprinkler systems must be obtained from Mr. Andy Post at Central Sprinkler Company (phone: +1-215-362-0700) before samples can be submitted for testing. Once the samples have been properly removed and packaged according to the instructions, they can be sent to either Andy Post at Central Sprinkler Company, 451 N. Cannon Ave., Lansdale, PA 19446, or to Mr. Kerry Bell at Underwriters Laboratories Inc., 333 Pfingsten Rd., Northbrook, IL 60062 for operational testing.