UL Asia
Asia Issue 19 (Fall, 2006)   UL
On the Mark On the Mark UL
Print

New requirements for Secondary Battery Packs under UL 60950-1, 1st Edition

There were numerous recalls of batteries and battery packs used with ITE (Information Technology Equipment) in the late 1990s and early 2000s, and they continue today. Several years ago the largest ITE Industry group in the United States, the Information Technology Industry Council (ITI), proposed to revise UL 60950 and require that Secondary (Rechargeable) Battery Packs used with Transportable Equipment additionally comply with UL 2054, Household and Commercial Batteries as a component requirement.
The proposal was accepted during the ANSI/ UL and SCC/ CSA standards development processes, and when the First Edition of UL 60950-1 was published in April, Annex P.1 (4.3.8) reflected this new component requirement. The most common types of ITE impacted by the requirements are notebook computers and their rechargeable battery packs.

The Effective Date of the First Edition of UL 60950-1 is July 1, 2006, and as of that date all new constructions of ITE submitted for the UL Mark are required to comply with the First Edition, including the UL 2054 component provision if the ITE is transportable and has a secondary battery pack.

The new requirement applies to secondary battery packs that typically are:

  • Intended for use with Transportable ITE (e.g., notebook computer); and
  • Hard case (hard pack), accommodating use as a spare carried separately from the ITE (e.g., in a computer case or book bag)

UL generally requires battery packs to have a rigid enclosure if the enclosure forms part of the ITE and may be carried externally (e.g., as a spare). If the battery pack enclosure forms an integral part of host equipment enclosure, UL 2054 is applied even if the battery pack is not detached and separately carried from the host equipment.

Battery packs without rigid enclosure (e.g. soft pack) and that are mounted totally inside an ITE enclosure will be investigated as part of end product that provides the complete enclosure. In such cases, the component requirements of UL 2054 are not applied.

Applicants for UL certification generally have the following options for obtaining certification for ITE battery packs:

Accessory Listing to NWGQ with complementary Listing to BBFS for battery packs with hardpack and Limited Power Source (LPS) output.

Accessory Listing to NWGQ with complementary Unlisted Component certification to BBFS3 for battery packs with hardpack and non-LPS output. Non-LPS battery packs generally must be linked to OEM manufacturer and model, or OEM family of models when applying for certification.

UL is currently developing a Practical Application Guidelines (PAG) (to be available via 60950 PAGOS - http://data.ul.com/pagos/) to more clearly outline all options.

To obtain more information about UL's certification services for Secondary Battery Packs in ITE, contact UL customer service representatives near you.


UL Logo
Top
In this issue
UL Primary Designated Engineers (PDEs)
UL Apex recognized as a CBTL for medical and measuring equipment
TPO chooses UL as its management system registrar
All grown up!
Safeguarding the integrity of the UL Mark
New requirements for Voltage Dependent Resistors under UL/ IEC 60950-1, 2nd Edition
Business continuity management: An essential tool for an organization’s survival
UL University
Standards Update
News Bites
Past Issues
Issue 18 (Summer 2006)
Issue 17 (Spring 2006)
Issue 16 (Winter 2005)
Archive  
bottom
UL logo © 2006, Underwriters Laboratories Inc. All rights reserved.
Unsubscribe